320DCNUMNFZCWC Price, Reseller, Stock

1 : $114.95
5 : $114.95
10 : $114.95
25 : $114.95
50 : $114.95
100 : $114.95
250 : $114.95
500 : $97.83
1,000 : $83.6
2,500 : $80.667
10,000 : $77.932

RJFSFTP5E0320

Amphenol PCD

Connector

1 : $115.481
5 : $107.652
10 : $96.234
25 : $94.798
50 : $94.798
100 : $93.404
250 : $90.735
500 : $88.215
1,000 : $87.006
2,500 : $87.006
10,000 : $87.006

Pasternack Enterprises US

PE3200LF

Pasternack Enterprises

Key Specifications, Connector Series 1: GR874, Connector Gender 1: Sexless, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: GR874, Connector Gender 2: Sexless, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50. GR874 Sexless to GR874 Sexless Cable Using RG142 Coax, RoHS. PE3200LF is a GR874 sexless to GR874 sexless cable using RG142 coax. This Pasternack GR874 sexless to GR874 sexless cable assembly uses a 50 Ohm GR874 for connector 1 and a 50 Ohm GR874 for connector 2. Our sexless GR874 to sexless GR874 cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3200LF GR874 sexless to GR874 sexless cable assembly is constructed with RG142 coax.

1,500

PE3C6193-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. Plenum 7/16 DIN Male to N Male Right Angle Low PIM Cable 200 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 7/16 DIN male to N male right angle low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 7/16 DIN male to N male right angle low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NM-RA-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-716M-LP 7/16 DIN cable connection on one end and right angle TC-SPP250-NM-RA-LP type N cable connection on the other. Our low PIM TC-SPP250-716M-LP 7/16 DIN to right angle TC-SPP250-NM-RA-LP N type cable assemblies have a male gender on end 1 and male on end 2. This TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NM-RA-LP N type cable is a male to male coax assembly, PE3C6193-200CM, can also be known as a low PIM TC-SPP250-716M-LP 7/16 DIN plug to right angle TC-SPP250-NM-RA-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-NM-RA-LP type N plug cable assembly PE3C6193-200CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-716M-LP 7/16 DIN cable assembly is manufactured with TC-SPP250-716M-LP 7/16 DIN to right angle TC-SPP250-NM-RA-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-716M-LP 7/16 DIN male to TC-SPP250-NM-RA-LP type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6193-200CM can also be used in the other direction and will be right angle TC-SPP250-NM-RA-LP type N male to TC-SPP250-716M-LP 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-716M-LP 7/16 DIN plug to TC-SPP250-NM-RA-LP type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-716M-LP 7/16 DIN to TC-SPP250-NM-RA-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-716M-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 7/16 DIN male to N male right angle low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts.

1 : $171.99
25 : $163.39
50 : $154.79
100 : $147.91

PE3FCA320-15M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 60 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: APC, Connector 2 Series: SC, Connector 2 Polish Type: APC, Jacket Burn Rating: OFNP, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber SC APC to SC APC, OS2 Single Mode Distribution Cable, 5.0mm Plenum, 2.0mm breakout, Yellow-15M. Pasternack’s PE3FCA320-15M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 15-meter long 6-fiber cable assembly is equipped with SC/APC to SC/APC connectors. Our yellow fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly has a single mode OS2 fiber that offers ultra-low attenuation over distances up to 10km for 10G Ethernet and beyond with a 9/125µm core size. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA320-15M fiber optic cable with a 5 mm cable diameter and 37 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/APC to SC/APC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. This OS2 fiber optic assembly is designed for enterprise backbones, long-haul networking, and high-speed data transmission and delivers exceptional reliability for critical infrastructure deployments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $203.99
5 : $195.83
10 : $187.67
25 : $179.51

PE3M0320-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMZ, Connector 1 Size: 8, Connector 1 Gender: Pin, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: Coax, RF Cable Specification: PE-SR405FL datasheet, RF Cable Impedance : 50 Ohm. BMZ Size 8 D38999 Contact Pin to SMA Female Cable 48 Inch Length Using PE-SR405FL Coax with HeatShrink, LF Solder. The PE3M0320-48 from Pasternack is a D38999 contact cable assembly that is built with a size 8 BMZ pin contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This BMZ to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 165 degrees C. Our BMZ pin to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0320-48 between-series RF cable has 0.78 inches of repeated minimum bend radius. BMZ pin to SMA female cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack PE3M0320-48 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this BMZ to SMA RF cable are available on our downloadable PDF datasheet. BMZ pin to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of BMZ and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMZ to SMA RF cable assembly as per your requirements.

1 : $271.99
10 : $261.11
25 : $250.23
100 : $239.35

PEWGA3205

Pasternack Enterprises

Key Specifications, Waveguide Size : WR-12, Low Max Noise Figure : 4.7 dB, Waveguide Frequency Band : E, Minimum Frequency : 60 GHz, Max Frequency : 90 GHz, Small Signal Gain: 30 dB, Flange Type and Size: UG-387/U Flange, Saturated Output Power: 18 dBm, Typical Output Power: 22 dBm. 4.2 dB Low Noise Amplifier (LNA), 60 to 90 GHz Frequencies in E Band, WR-12 Waveguide connectors with UG-387/U Flanges, 30 dB Gain., PEWGA3205 by Pasternack is a mid-power Waveguide Low Noise Amplifier (LNA) with a frequency band of E eligible for same day shipping worldwide. This WR-12 high frequency (HF) waveguide LNA operates between the frequencies of 60 GHz – 90 GHz with a typical gain of 30 dB. The PEWGA3205 E band LNA operates between -40 deg C to 80 deg C. Pasternack's 60 GHz – 90 GHz low noise amplifiers have a maximum noise figure of only 4.7 dB and a typical gain of 30 dB. The waveguide WR-12 low noise 4.7 dB amp has a max 12 Vdc integrated voltage regulation with 330 mA of typical operating Vdc current. This high reliability E band LNA maintains 30 dB of gain, and an exceptionally low 4.7 dB figure of noise; it's design is unconditionally stable, exhibiting an impressive 18 dBm of saturated power output (Psat). This HF LNA PEWGA3205 expresses a max 12 Vdc of voltage supply with 18 dBm of typical power output and it's E-band low noise figure amplification is designed for use in military, labs, telecom infrastructure, and even space applications. Contact Pasternack's knowledgeable support staff for assistance with this 90 GHz E-band frequency, 4.7 dB noise figure WR-12 amplifier. Download our UG-387/U RF LNA PDF datasheet PEWGA3205 with specifications and our CAD drawing of the of this 4.7 dB waveguide low noise UG-387/U amplifier with dimensions for details. The 330 mA WR-12 high frequency LNA is built to be sturdy and is designed for dozens of applications with its WR-12 I/O waveguide ports for UG-387/U waveguide flanges. Our 330 mA aluminum waveguide LNA's dimensions and size specifications: 1.5 inches long, 0.937 inches tall, 1.5 inches wide, and weight of 0.2 lbs. Order your resilient, high-reliability 60 GHz 90 GHz low noise amplifiers today, through the website or by phone; we're ready to pack and ship these high-quality low noise 330 mA WR-12 waveguide amplifier LNA's anywhere in the world. This low noise 330 mA RF amplifier is ready for same day purchase and is complete with a maximum noise figure no more than 4.7 dB. Pasternack's PEWGA3205 waveguide HF LNA is housed within aluminum and plated with gold, which makes for a sturdy and reliable unit. This 60 GHz – 90 GHz E band LNA with 18 dBm power is part of over 100,000 RF, microwave, and millimeter wave components that we keep in stock. Pasternack stocks a wide array of small 30 dB signal low noise amplifier products that ship same day from our warehouse for all your RF, microwave, and millimeter wave WR-12 LNA needs.

1 : $15,400.0
5 : $14,784.0
10 : $14,168.0
25 : $13,552.0

PE3W20320

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm. SSMB Plug to SMP Female Right Angle Cable Using RG196 Coax. PE3W20320 is a SSMB plug to SMP female right angle cable using RG196 coax. This Pasternack SSMB plug to SMP female right angle cable assembly uses a 50 Ohm SSMB for connector 1 and a 50 Ohm SMP for connector 2. SSMB to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SSMB to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20320 SSMB plug to SMP female right angle cable assembly is constructed with RG196 coax.

PE3W23200

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. BNC Male to SMA Female Bulkhead Cable Using LMR-195 Coax. PE3W23200 is a BNC male to SMA female bulkhead cable using LMR-195 coax. This Pasternack BNC male to SMA female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. Our male BNC to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W23200 BNC male to SMA female bulkhead cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3205LF-24

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 24 inches. 7/16 DIN Male to 7/16 DIN Male Cable 24 Inch Length Using RG393 Coax, LF Solder, RoHS., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 24 inch length using RG393 coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 24 inch length using RG393 coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3205LF-24, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3205LF-24 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7.5 GHz maximum frequency 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 24 inch length using RG393 coax, LF solder, RoHS.
RoHS : Compliant

1 : $344.99
25 : $327.74
50 : $310.49

PE3C0320LF

Pasternack Enterprises

PE3C11320

Pasternack Enterprises

Key Specifications, Connector Series 1: F, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 75 Ohm, Connector Series 2: Mini SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: 4855R-BK. 75 Ohm F Female Bulkhead to 75 Ohm Mini SMB Plug Cable Using 75 Ohm 4855R-BK Coax. PE3C11320 is a F female bulkhead to Mini SMB plug cable using coax. This Pasternack F female bulkhead to Mini SMB plug cable assembly uses a 75 Ohm F for connector 1 and a 75 Ohm Mini SMB for connector 2. Our female F bulkhead to plug Mini SMB cable assembly uses a cable type that is. Pasternack PE3C11320 F female bulkhead to Mini SMB plug cable assembly is constructed with coax.

PE3C3205-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Female to TNC Male Low Loss Cable 60 Inch Length Using PE-P142LL Coax, RoHS., Radio frequency assembly SMA female to TNC male low loss cable 60 inch length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA female to TNC male low loss cable 60 inch length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our low loss SMA to TNC cable assemblies have a female gender on end 1 and male on end 2. This SMA to TNC cable is a female to male coax assembly, PE3C3205-60, can also be known as a low loss SMA jack to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA jack to TNC plug cable assembly PE3C3205-60 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA female to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3205-60 can also be used in the other direction and will be TNC male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to TNC male low loss cable 60 inch length using PE-P142LL coax, RoHS.

1 : $318.99
25 : $303.04
50 : $287.09

PE3205LF-72

Pasternack Enterprises

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm, Length: 72 inches. 7/16 DIN Male to 7/16 DIN Male Cable 72 Inch Length Using RG393 Coax, LF Solder, RoHS., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 72 inch length using RG393 coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 72 inch length using RG393 coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE3205LF-72, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3205LF-72 is built with RG393 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7.5 GHz maximum frequency 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 72 inch length using RG393 coax, LF solder, RoHS.

1 : $455.99
25 : $433.19
50 : $410.39

PE3320LF

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50. N Male to N Female Bulkhead Cable Using RG58 Coax, RoHS. PE3320LF is a type N male to type N female bulkhead cable using RG58 coax. This Pasternack type N male to type N female bulkhead cable assembly uses a 50 Ohm N type for connector 1 and a 50 Ohm type N for connector 2. Our male type N to female type N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3320LF N type male to N type female bulkhead cable assembly is constructed with RG58 coax.

PE3C1320

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using LMR-600 Coax. PE3C1320 is a N male to N male cable using LMR-600 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C1320 N male to N male cable assembly is constructed with LMR-600 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C6333-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. Outdoor Rated 4.3-10 Female to 7/16 DIN Male Low PIM Cable 200 cm Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 200 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 200 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310F-LP 4.3-10 cable connection on one end and TC-SPP250-716M-LP 7/16 DIN cable connection on the other. Our low PIM TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable assemblies have a female gender on end 1 and male on end 2. This TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable is a female to male coax assembly, PE3C6333-200CM, can also be known as a low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-SPP250-716M-LP 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310F-LP 4.3-10 jack to TC-SPP250-716M-LP 7/16 DIN plug cable assembly PE3C6333-200CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310F-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310F-LP 4.3-10 female to TC-SPP250-716M-LP 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6333-200CM can also be used in the other direction and will be TC-SPP250-716M-LP 7/16 DIN male to TC-SPP250-4310F-LP 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-SPP250-716M-LP 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310F-LP 4.3-10 to TC-SPP250-716M-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310F-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to 7/16 DIN male low PIM cable 200 cm length using SPO-250 coax using Times Microwave parts.

1 : $175.99
25 : $167.19
50 : $158.39
100 : $151.35

TE Connectivity

8-32060-1

TE Connectivity

TERMINAL,PIDG SPD 16-14 10 Spade Terminal Type: Spade Tongue Terminal Wire Size: 16 AWG Wire Size: 1.25 – 2 mm² Wire Size: 2050 – 5180 CMA Stud Size: #10 Spade Tongue Terminal 16 AWG 1.25 – 2 mm² 2050 – 5180 CMA | Pidg Spade Tongue Terminal | Part Number: 8-32060-1 | Internal Number: 8-32060-1 | Alias Number: AMPS-8-0032060-1 | TE Connectivity
RoHS : Compliant

2,500 : $1.36
1,000 : $1.4
500 : $1.44
250 : $1.47
100 : $1.51
50 : $1.55
25 : $1.58
10 : $1.62
1 : $1.66

1,214

2-320631-1

TE Connectivity

TERMINAL, PIDG RING 16-14 HD 6 Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 16 – 14 AWG Wire Size: 1.25 – 2 mm² Wire Size: 2050 – 5180 CMA Stud Size: M3.5 #6 Closed Ring Tongue Terminal 16 – 14 AWG 1.25 – 2 mm² 2050 – 5180 CMA | Pidg Ring Tongue Terminal | Part Number: 2-320631-1 | Internal Number: 2-320631-1 | TE Connectivity
RoHS : Compliant

1,000 : $1.61
500 : $1.66
250 : $1.71
100 : $1.76
50 : $1.81
25 : $1.86
10 : $1.91
1 : $1.95

544

1-207532-0

TE Connectivity

SKT HDR ASSY,24P,MMATE LF PCB Connector Type: PCB Mount Header PCB Mount Orientation: Vertical Connector System: Wire-to-Board Number of Positions: 24 Number of Rows: 6 PCB Mount Header Vertical Wire-to-Board 24 | PCB Header & Receptacle | Part Number: 1-207532-0 | Internal Number: 1-207532-0 | TE Connectivity
RoHS : Compliant

250 : $54.07
100 : $56.23
50 : $58.4
25 : $60.56
10 : $62.72
1 : $64.89

156

T1320160132-000

TE Connectivity

H16B-TG-RO-M32 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1320160132-000 | Internal Number: T1320160132-000 | TE Connectivity
RoHS : Compliant

25 : $23.54
10 : $25.36
1 : $27.17

T1320320125-000

TE Connectivity

H32B-TG-RO-M25 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1320320125-000 | Internal Number: T1320320125-000 | TE Connectivity
RoHS : Compliant

10 : $39.66
1 : $44.07

T1320320129-000

TE Connectivity

H32B-TG-RO-PG29 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1320320129-000 | Internal Number: T1320320129-000 | TE Connectivity
RoHS : Compliant

10 : $39.66
1 : $44.07

T1320320136-000

TE Connectivity

H32B-TG-RO-PG36 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1320320136-000 | Internal Number: T1320320136-000 | TE Connectivity
RoHS : Compliant

10 : $39.66
1 : $44.07

FN3270H-320-99

TE Connectivity

FN3270H-320-99 Current Rating: 320 A Input Termination Type: Busbar Output Termination Type: Busbar Wiring Configuration: DELTA (3 wire + ground) Operating Voltage: 520 VAC 3-Phase Filters Fn3270 & Compact Emc/rfi Filter For Industrial Motor Drive | 320 A Busbar DELTA (3 wire + ground) | Part Number: FN3270H-320-99 | Internal Number: 806153-SF | FN3270H-320-99 Current Rating: 320 A Input Termination Type: Busbar Output Termination Type: Busbar Wiring Configuration: DELTA (3 wire + ground) Operating Voltage: 520 VAC 3-Phase Filters Fn3270 & Compact Emc/rfi Filter For Industrial Motor Drive | 320 A Busbar DELTA (3 wire + ground) | Part# FN3270H-320-99
RoHS : Compliant

1 : $3,533.39

T1320320121-000

TE Connectivity

H32B-TG-RO-PG21 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1320320121-000 | Internal Number: T1320320121-000 | TE Connectivity
RoHS : Compliant

10 : $37.77
1 : $41.97

T1310320132-000

TE Connectivity

H32B-TS-RO-M32 Hood & Base Connector Product Type: Hood Cable Entry Location: Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1310320132-000 | Internal Number: T1310320132-000 | TE Connectivity
RoHS : Compliant

10 : $39.66
1 : $44.07

ESTA002NN00320001000

TE Connectivity

615 EXTENSION Connector System: Cable-to-Cable Circular Connector Type: Circular Connector Plug Number of Positions: 12 Circular Connector Shell Size: 15 Sealable: No Cable-to-Cable Circular Connector Plug 12 15 | Standard Circular Connector | Part Number: ESTA002NN00320001000 | Internal Number: ESA002N00320001000 | TE Connectivity
RoHS : Compliant

25 : $33.17
10 : $35.73
1 : $38.27

T1320480132-000

TE Connectivity

H48B-TG-RO-M32 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1320480132-000 | Internal Number: T1320480132-000 | TE Connectivity
RoHS : Compliant

10 : $54.27
1 : $60.31

FN2500-32-07-C13

TE Connectivity

FN2500-32-07-C13 Current Rating: 32 A Input Termination Type: Litz Wire Output Termination Type: Litz Wire Leakage Current (Max) (120VAC, 60Hz): .45 mA Leakage Current (Max) (250VAC, 50Hz): .87 mA Single Phase Filters Fn2500 & Low Profile High Performance Emc/rfi Filter | 32 A Litz Wire .45 mA | Part Number: FN2500-32-07-C13 | Internal Number: 821794-SF | TE Connectivity
RoHS : Compliant

10 : $140.5
1 : $156.11

T1329320132-000

TE Connectivity

H32A-TG-M32 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood Top & Side | Rectangular Connector Hoods & Base | Part Number: T1329320132-000 | Internal Number: T1329320132-000 | TE Connectivity
RoHS : Compliant

1 : $39.87

T1320060132-000

TE Connectivity

H6B-TG-M32 Hood & Base Connector Product Type: Hood Cable Entry Location: Top & Side Hood & Base Locking Device Type: Locking Clip Sealable: Yes Hood Top & Side Locking Clip | Rectangular Connector Hoods & Base | Part Number: T1320060132-000 | Internal Number: T1320060132-000 | TE Connectivity
RoHS : Compliant

25 : $14.66
10 : $15.79
1 : $16.92

Teledyne HiRel

5962-8606320QUA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 45 NS ACCESS TIME
RoHS : Not Compliant

M38510/33203B2A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8606320QXA

Teledyne HiRel

PROM, UV ERASABLE, 32K X 8, 45 NS ACCESS TIME
RoHS : Not Compliant

5962-8853201ZA

Teledyne HiRel

A/D CONVERTER, 9-BIT
RoHS : Not Compliant

5962-8853201TC

Teledyne HiRel

A/D CONVERTER, 9-BIT

5962-9673201QXA

Teledyne HiRel

POWER DRIVER, QUAD, LOW POWER
RoHS : Not Compliant

5962-8953201XA

Teledyne HiRel

BUS TRANSCEIVER, DUAL ASYNCHRONOUS
RoHS : Not Compliant

8413202SA

Teledyne HiRel

STATIC RAM, 16K X1, 45 NS

M38510/33202B2A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

8413202RA

Teledyne HiRel

STATIC RAM, 16K X1, 45 NS

8413205YA

Teledyne HiRel

STATIC RAM, 16K X 1, 35 NS ACCESS TIME

5962-9673201QYA

Teledyne HiRel

POWER DRIVER, QUAD, LOW POWER
RoHS : Not Compliant

M38510/33202BXA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/33203BRA

Teledyne HiRel

BUFFER/DRIVER, OCTAL, NONINVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

M38510/33204B2A

Teledyne HiRel

BUFFER/DRIVER, OCTAL, INVERTING, WITH 3-STATE OUTPUTS
RoHS : Not Compliant

Venkel Ltd.

HPCR0402-R-4320FT

VENKEL LTD

High Power CR;0402;1/8W;432R;�1%
RoHS : Compliant

10,000

PWCR0603-TL-2320FT

VENKEL LTD

Pulse Withstanding CR;0603;1/4W;�200PPM;232R;�1%
RoHS : Compliant

PWCR0603-UK-4320FT

VENKEL LTD

Pulse Withstanding CR;0603;1/3W;�100PPM;432R;�1%
RoHS : Compliant

PWCR0805-RK-7320DT

VENKEL LTD

Pulse Withstanding CR;0805;1/8W;�100PPM;732R;�0.5%
RoHS : Compliant

PWCR0805-VK-3320FT

VENKEL LTD

Pulse Withstanding CR;0805;1/2W;�100PPM;332R;�1%
RoHS : Compliant

PWCR1210-XK-4320DT

VENKEL LTD

Pulse Withstanding CR;1210;1W;�100PPM;432R;�0.5%
RoHS : Compliant

PWCR2010-XK-3320FT

VENKEL LTD

Pulse Withstanding CR;2010;1W;�100PPM;332R;�1%
RoHS : Compliant

PWCR2512-ZK-2320DT

VENKEL LTD

Pulse Withstanding CR;2512;1.5W;�100PPM;232R;�0.5%
RoHS : Compliant

AGCR0805-RK-7320FT

VENKEL LTD

Auto Grade Resistor;0805;1/8W;�100PPM;732R;�1%
RoHS : Compliant

HPTF0603-QN-7320BT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�10PPM;732R;�0.1%
RoHS : Compliant

HPTF0603-QP-2320CT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�5PPM;232R;�0.25%
RoHS : Compliant

HPTF0603-SC-7320CT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�50PPM;732R;�0.25%
RoHS : Compliant

HPTF0603-SE-4320DT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�25PPM;432R;�0.5%
RoHS : Compliant

HPTF0805-RP-3320CT

VENKEL LTD

High Power Thin Film CR;0805;1/8W;�5PPM;332R;�0.25%
RoHS : Compliant

HPTF1210-UE-2320UT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�25PPM;232R;�0.01%
RoHS : Compliant

Waytek, Inc.

132-00010

HellermannTyton

HellermannTyton 132-00010 button head cable tie is a panel-mount nylon tie designed to secure bundles while attaching them to a surface. Its low-profile button head supports clean routing in confined spaces, and the one-piece locking design helps fasten wire and harness assemblies efficiently.

50 : $0.7784
200 : $0.7469
500 : $0.7156
1,000 : $0.6791

20,750

32006-CP

Eaton Electronics

VEC Output Connector CPA

5 : $0.7442
10 : $0.7171
50 : $0.693
100 : $0.6598
200 : $0.6357
500 : $0.6146

4,772

643203311

Molex

CMC Rcpt 48Ckt R Blk Mat Seal

1 : $9.1
200 : $8.65
500 : $8.05
1,000 : $7.76

767

RSW1 R13-208B2-02

Switch Components Inc

Round Rocker Switch Connector disc way, no repl

1 : $6.18
10 : $5.48
50 : $5.07
100 : $4.88
200 : $4.75
500 : $4.61

482

320-402-4

Short Stop Circuit Breaker Copper Bus Bar, 4 Position

5 : $2.6619
50 : $2.2271
100 : $1.93
200 : $1.824
500 : $1.7497

355

320-401-8

Short Stop Circuit Breaker Nylon Bracket, 8 Position

1 : $4.3094
50 : $3.6127
100 : $3.1279
200 : $2.9558
500 : $2.8346

348

4320-0623

Pressmaster AB

Replacement Blade For PN 557

1 : $8.06
10 : $7.76

0332002159

The Bosch Group

Power Relay, Normally Open, 12VDC, 100A

1 : $74.328
5 : $72.3549
10 : $70.3793
25 : $67.6605

4320-0614

Pressmaster AB

Replacement Straight Blade CASSETTE FOR P/N 555

1 : $24.37
10 : $23.44

SSC3-200A

InPower Semiconductor Company Ltd

Solid State DC Contactor 200A, Series 3

1 : $216.3
5 : $207.29
10 : $198.28
25 : $187.98

684-1251-032-02

Trombetta

Sealed 12V DC Contactor Continuous Duty, L-Bracket Silver Contacts

1 : $40.59
5 : $36.25
10 : $33.83
50 : $31.9
100 : $30.45
200 : $29.0

HDBB-320-1-250

3M HDBB-320-1-250 heat shrinkable cable breakout boot is a 3-way molded heat shrink shape for multiconductor armored or sheathed cables. It provides electrical and mechanical protection, uses adhesive-sealed polyolefin construction, and has 1.20"/0.50" outlet dimensions for compact breakout sealing.

1 : $42.02
5 : $40.47
10 : $39.17
20 : $37.09
50 : $35.8
100 : $34.75

4320-0616

Pressmaster AB

Waytek Heavy-Duty Cable STRIPPING TOOL

1 : $68.46
10 : $64.76

4320-0612

Pressmaster AB

Waytek Self-Adjusting CUT & STRIPPER TOOL

1 : $70.05
10 : $66.26

22320-300

Eaton Electronics

20 AMP Circuit Breaker Type 3 ATC/ATO Bussmann 22320-300