3361I-R24JH Price, Reseller, Stock

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. Water Blue FAKRA Jack to Reverse Polarity TNC Male Low Loss Cable 150 cm Length Using LMR-100 Coax., Radio frequency assembly water blue FAKRA jack to reverse polarity TNC male low loss cable 150 cm length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Water blue FAKRA jack to reverse polarity TNC male low loss cable 150 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and reverse polarity TNC cable connection on the other. Our low loss FAKRA to reverse polarity TNC cable assemblies have a jack gender on end 1 and male on end 2. This FAKRA to reverse polarity TNC cable is a jack to male coax assembly, PE3W03361-150CM, can also be known as a low loss FAKRA female to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. FAKRA female to reverse polarity TNC plug cable assembly PE3W03361-150CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency FAKRA jack to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03361-150CM can also be used in the other direction and will be reverse polarity TNC male to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to TNC cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack to reverse polarity TNC male low loss cable 150 cm length using LMR-100 coax.

1 : $69.99
25 : $66.49
50 : $62.99
100 : $60.19

PE33618LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. HN Male to BNC Male Cable Using RG223 Coax with HeatShrink, LF Solder. PE33618LF/HS is a HN male to BNC male cable using RG223 coax. This Pasternack HN male to BNC male cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm BNC for connector 2. Our male HN to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE33618LF/HS HN male to BNC male cable assembly is constructed with RG223 coax.

PE3361-6

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to SMA Male Cable 6 Inch Length Using RG188 Coax., Radio frequency assembly SMA male to SMA male cable 6 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 6 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3361-6, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3361-6 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 6 inch length using RG188 coax.

PE3W03361-60

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 60 inches. Water Blue FAKRA Jack to Reverse Polarity TNC Male Low Loss Cable 60 Inch Length Using LMR-100 Coax., Radio frequency assembly water blue FAKRA jack to reverse polarity TNC male low loss cable 60 inch length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Water blue FAKRA jack to reverse polarity TNC male low loss cable 60 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and reverse polarity TNC cable connection on the other. Our low loss FAKRA to reverse polarity TNC cable assemblies have a jack gender on end 1 and male on end 2. This FAKRA to reverse polarity TNC cable is a jack to male coax assembly, PE3W03361-60, can also be known as a low loss FAKRA female to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. FAKRA female to reverse polarity TNC plug cable assembly PE3W03361-60 is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency FAKRA jack to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03361-60 can also be used in the other direction and will be reverse polarity TNC male to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to TNC cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack to reverse polarity TNC male low loss cable 60 inch length using LMR-100 coax.

1 : $56.99
25 : $54.14
50 : $51.29
100 : $49.01

PE3C6336-150CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 59.05 inches. Outdoor Rated 4.3-10 Female to N Male Low PIM Cable 150 cm Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to N male low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to N male low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310F-LP 4.3-10 cable connection on one end and TC-250-NM-LP N type cable connection on the other. Our low PIM TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable assemblies have a female gender on end 1 and male on end 2. This TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable is a female to male coax assembly, PE3C6336-150CM, can also be known as a low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NM-LP N type plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NM-LP type N plug cable assembly PE3C6336-150CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310F-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310F-LP 4.3-10 female to TC-250-NM-LP N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6336-150CM can also be used in the other direction and will be TC-250-NM-LP type N male to TC-SPP250-4310F-LP 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NM-LP N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310F-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to N male low PIM cable 150 cm length using SPO-250 coax using Times Microwave parts.

1 : $137.99
25 : $131.09
50 : $124.19
100 : $118.67

PE3W03361-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Water Blue FAKRA Jack to Reverse Polarity TNC Male Low Loss Cable 100 cm Length Using LMR-100 Coax., Radio frequency assembly water blue FAKRA jack to reverse polarity TNC male low loss cable 100 cm length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Water blue FAKRA jack to reverse polarity TNC male low loss cable 100 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and reverse polarity TNC cable connection on the other. Our low loss FAKRA to reverse polarity TNC cable assemblies have a jack gender on end 1 and male on end 2. This FAKRA to reverse polarity TNC cable is a jack to male coax assembly, PE3W03361-100CM, can also be known as a low loss FAKRA female to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. FAKRA female to reverse polarity TNC plug cable assembly PE3W03361-100CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency FAKRA jack to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03361-100CM can also be used in the other direction and will be reverse polarity TNC male to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to TNC cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack to reverse polarity TNC male low loss cable 100 cm length using LMR-100 coax.

1 : $67.99
25 : $64.59
50 : $61.19
100 : $58.47

PE3W03361-24

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 24 inches. Water Blue FAKRA Jack to Reverse Polarity TNC Male Low Loss Cable 24 Inch Length Using LMR-100 Coax., Radio frequency assembly water blue FAKRA jack to reverse polarity TNC male low loss cable 24 inch length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Water blue FAKRA jack to reverse polarity TNC male low loss cable 24 inch length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and reverse polarity TNC cable connection on the other. Our low loss FAKRA to reverse polarity TNC cable assemblies have a jack gender on end 1 and male on end 2. This FAKRA to reverse polarity TNC cable is a jack to male coax assembly, PE3W03361-24, can also be known as a low loss FAKRA female to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. FAKRA female to reverse polarity TNC plug cable assembly PE3W03361-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency FAKRA jack to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03361-24 can also be used in the other direction and will be reverse polarity TNC male to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to TNC cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack to reverse polarity TNC male low loss cable 24 inch length using LMR-100 coax.

1 : $52.99
25 : $50.34
50 : $47.69
100 : $45.57

PE3W03361/HS

Pasternack Enterprises

PE3W03361-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. Water Blue FAKRA Jack to Reverse Polarity TNC Male Low Loss Cable 200 cm Length Using LMR-100 Coax., Radio frequency assembly water blue FAKRA jack to reverse polarity TNC male low loss cable 200 cm length using LMR-100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Water blue FAKRA jack to reverse polarity TNC male low loss cable 200 cm length using LMR-100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with FAKRA cable connection on one end and reverse polarity TNC cable connection on the other. Our low loss FAKRA to reverse polarity TNC cable assemblies have a jack gender on end 1 and male on end 2. This FAKRA to reverse polarity TNC cable is a jack to male coax assembly, PE3W03361-200CM, can also be known as a low loss FAKRA female to reverse polarity TNC plug cable assembly and will be shipped same-day as it is purchased. FAKRA female to reverse polarity TNC plug cable assembly PE3W03361-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency FAKRA jack to reverse polarity TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03361-200CM can also be used in the other direction and will be reverse polarity TNC male to FAKRA jack cable assembly if the opposite connectivity is required. Low loss FAKRA female to TNC reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to TNC cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack to reverse polarity TNC male low loss cable 200 cm length using LMR-100 coax.

1 : $70.99
25 : $67.44
50 : $63.89
100 : $61.05

PE3C3361/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. N Male to BNC Male Right Angle Cable Using RG400 Coax with HeatShrink. PE3C3361/HS is a N male to BNC male right angle cable using RG400 coax. This Pasternack N male to BNC male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. N to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3361/HS N male to BNC male right angle cable assembly is constructed with RG400 coax.

PE3361-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 24 inches. SMA Male to SMA Male Cable 24 Inch Length Using RG188 Coax., Radio frequency assembly SMA male to SMA male cable 24 inch length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 24 inch length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3361-24, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3361-24 is built with RG188 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 24 inch length using RG188 coax.

PE3C6336-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-250, RF Cable Type: SPO-250, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. Outdoor Rated 4.3-10 Female to N Male Low PIM Cable 100 cm Length Using SPO-250 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 4.3-10 female to N male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 4.3-10 female to N male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310F-LP 4.3-10 cable connection on one end and TC-250-NM-LP type N cable connection on the other. Our low PIM TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable assemblies have a female gender on end 1 and male on end 2. This TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable is a female to male coax assembly, PE3C6336-100CM, can also be known as a low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NM-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NM-LP N type plug cable assembly PE3C6336-100CM is built with SPO-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310F-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310F-LP 4.3-10 female to TC-250-NM-LP N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6336-100CM can also be used in the other direction and will be TC-250-NM-LP type N male to TC-SPP250-4310F-LP 4.3-10 female cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310F-LP 4.3-10 jack to TC-250-NM-LP N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310F-LP 4.3-10 to TC-250-NM-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310F-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 4.3-10 female to N male low PIM cable 100 cm length using SPO-250 coax using Times Microwave parts.

1 : $119.99
25 : $113.99
50 : $107.99
100 : $103.19

PE3W13361

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. Push-On SMP Female Right Angle to SSMB Jack Bulkhead Cable Using RG174 Coax. PE3W13361 is a SMP female right angle to SSMB jack bulkhead cable using RG174 coax. This Pasternack SMP female right angle to SSMB jack bulkhead cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SSMB for connector 2. SMP right angle to SSMB coaxial cable assembly uses 90 degree right angle coax cable connector. Our female SMP right angle to jack SSMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W13361 SMP female right angle to SSMB jack bulkhead cable assembly is constructed with RG174 coax.

PE3C3361

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50. N Male to BNC Male Right Angle Cable Using RG400 Coax. PE3C3361 is a N type male to BNC male right angle cable using RG400 coax. This Pasternack type N male to BNC male right angle cable assembly uses a 50 Ohm type N for connector 1 and a 50 Ohm BNC for connector 2. type N to BNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N type to male BNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3361 type N male to BNC male right angle cable assembly is constructed with RG400 coax and the maximum VSWR is 1.4:1.

PE3C3336-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Fire Rated SMA Male to SMA Male Low Loss Cable 12 Inch Length Using LMR-195-FR Coax., Radio frequency assembly fire rated SMA male to SMA male low loss cable 12 inch length using LMR-195-FR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Fire rated SMA male to SMA male low loss cable 12 inch length using LMR-195-FR coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C3336-12 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C3336-12 is built with LMR-195-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated SMA male to SMA male low loss cable 12 inch length using LMR-195-FR coax.

1 : $72.99
25 : $69.34
50 : $65.69
100 : $62.77

Venkel Ltd.

UPTF0402-16W-N-3361AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�10PPM;3.36K;�0.05%
RoHS : Compliant

UPTF0402-16W-N-3361BT

VENKEL LTD

Ultra Precision Thin Film CR;0402;1/16W;�10PPM;3.36K;�0.1%
RoHS : Compliant

UPTF0603-16W-E-3361AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0603;1/16W;�25PPM;3.36K;�0.05%
RoHS : Compliant

TFCR0603-10W-K-3361DT

VENKEL LTD

Thin Film CR;0603;1/10W;�100PPM;3.36K;�0.5%
RoHS : Compliant

TFCR0603-16W-C-3361CT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�50PPM;3.36K;�0.25%
RoHS : Compliant

TFCR0805-8W-K-3361BT-1K

VENKEL LTD

Thin Film CR;0805;1/8W;�100PPM;3.36K;�0.1%
RoHS : Compliant

TFCR1206-4W-C-3361CT

VENKEL LTD

Thin Film CR;1206;1/4W;�50PPM;3.36K;�0.25%
RoHS : Compliant

TFCR1210-4W-C-3361DT

VENKEL LTD

Thin Film CR;1210;1/4W;�50PPM;3.36K;�0.5%
RoHS : Compliant

UPTF1206-8W-N-3361UT-1K

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;10PPM;3.36K;�0.01%
RoHS : Compliant

UPTF1206-8W-P-3361CT-1K

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;5PPM;3.36K;�0.25%
RoHS : Compliant

UPTF2512-2W-N-3361CT

VENKEL LTD

Ultra Precision Thin Film CR;2512;1/2W;�10PPM;3.36K;�0.25%
RoHS : Compliant

UPTF0805-10W-E-3361AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�25PPM;3.36K;�0.05%
RoHS : Compliant

TFCR0603-16W-C-3361FT

VENKEL LTD

Thin Film CR;0603;1/16W;�50PPM;3.36K;�1%
RoHS : Compliant

TFCR0805-10W-K-3361FT

VENKEL LTD

Thin Film CR;0805;1/10W;�100PPM;3.36K;�1%
RoHS : Compliant

TFCR0805-8W-C-3361CT

VENKEL LTD

Thin Film CR;0805;1/8W;�50PPM;3.36K;�0.25%
RoHS : Compliant

Vyrian

1713361

Phoenix Contact

Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

11,460

3361S-1-102GLF

Bourns Inc

Trimmer, Cermet, 0.5W, 1000ohm, 300V, 10% +/-Tol, 100ppm/Cel, 1 Turn(s), 2619
RoHS : Compliant

8,532

5-103361-7

TE Connectivity

Board Connector, 9 Contact(s), 1 Row(s), Male, Right Angle, 0.1 inch Pitch, Solder Terminal, Locking, Black Insulator, Receptacle
RoHS : Compliant

7,235

KTC7336128

Kingston Technology Company

6,153

XC7336-15PQ44I

AMD Xilinx

OT PLD, 23ns, 36-Cell, CMOS, PQFP44
RoHS : Not Compliant

4,022

XC7336-10WC44I

AMD Xilinx

UV PLD, 15ns, 36-Cell, CMOS, CQCC44
RoHS : Not Compliant

3,460

5962-01-083-3611

Texas Instruments

Jbar-Kbar Flip-Flop, 2-Func, Negative Edge Triggered, TTL, PDIP14
RoHS : Not Compliant

3,448

XC7336-15WC44C

AMD Xilinx

UV PLD, 23ns, 36-Cell, CMOS, CQCC44
RoHS : Not Compliant

3,265

XC7336-12PC44C

AMD Xilinx

OT PLD, 19ns, 36-Cell, CMOS, PQCC44
RoHS : Not Compliant

3,016

XC7336-10PC44C

AMD Xilinx

OT PLD, 15ns, 36-Cell, CMOS, PQCC44
RoHS : Not Compliant

1,929

XC7336-10PQ44C

AMD Xilinx

OT PLD, 15ns, 36-Cell, CMOS, PQFP44
RoHS : Not Compliant

1,913

XC7336-12WC44M

AMD Xilinx

UV PLD, 19ns, CMOS, CQCC44

1,397

BFC233610474

Vishay BCcomponents

Polypropylene, 630V, 20% +Tol, 20% -Tol, 0.47uF
RoHS : Compliant

842

WINT1206LF033611A

Tt Electronics Plc

Fixed Resistor, Thin Film, 0.33W, 3610ohm, 200V, 0.05% +/-Tol, 25ppm/Cel, Surface Mount, 1206

815

1623361

Phoenix Contact

Circular Connector
RoHS : Compliant

326

Waytek, Inc.

148336-10

General Cable Technologies Corporation

2 GA SGX Black Cross-Link Bare Copper Battery Cable -51C to 125C 133/23 Stranding

100 : $3.1042
250 : $2.8026
500 : $2.5366
1,000 : $2.4125

3,650

7000133614

3M EPS-300 heat shrink tubing is black polyolefin tubing with a 1/4" size for insulating and protecting wire, terminals, and splices. Its flexible thin-wall construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

1 : $7.6
10 : $7.18
50 : $6.91
100 : $6.58
500 : $6.35

478

7000133616

3M EPS-300 heat shrink tubing is black polyolefin tubing with a 1/2" size for insulating and protecting wire, terminals, and splices. Its flexible thin-wall construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

1 : $11.13
10 : $10.53
50 : $10.12
100 : $9.65
500 : $9.31

448

7000133617

3M EPS-300 heat shrink tubing is black polyolefin tubing with a 3/4" size for insulating and protecting wire, terminals, and splices. Its flexible thin-wall construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

1 : $15.2
10 : $13.22
50 : $13.22
100 : $11.45
500 : $11.24

421

7000133613

3M EPS-300 heat shrink tubing is black polyolefin tubing with a 3/16" size for insulating and protecting wire, terminals, and splices. Its flexible thin-wall construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

1 : $6.75
10 : $6.39
50 : $6.14
100 : $5.85
500 : $5.64

397

7000133615

3M EPS-300 heat shrink tubing is black polyolefin tubing with a 3/8" size for insulating and protecting wire, terminals, and splices. Its flexible thin-wall construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

1 : $9.64
10 : $8.74
20 : $8.27
50 : $7.94
100 : $7.57
500 : $7.31

293

7000133618

3M EPS-300 heat shrink tubing is black polyolefin tubing with a 1" size for insulating and protecting wire, terminals, and splices. Its flexible thin-wall construction supports clean shrink coverage, abrasion protection, and dependable electrical insulation in harness applications.

1 : $20.84
10 : $19.7
50 : $18.94
100 : $18.06
500 : $17.43