400G0-R Price, Reseller, Stock

Fixed Frequency Current Mode Controller for Flyback Converters Integrated HV Startup and X2 Discharge Circuit (Alt: NCP12400BBBBB2DR2G)
RoHS : Compliant

2,500

DMTH4002SCTB-13

Diodes Incorporated

(Alt: DMTH4002SCTB-13)
RoHS : Compliant

800

SIT1602BI-11-YYS-24.000000G

SiTime Corporation

MEMS Crystal Oscillator 24MHz 162V to 363V 15pF 4Pin SMD TR (Alt: SIT1602BI-11-YYS-24.000000G)
RoHS : Compliant

500

EVK-NINA-B400

u-blox AG

EVK for NINAB400B401 with open CPU Standalone Bluetooth Low Energy UFL antenna connector and USB (Alt: EVK-NINA-B400)
RoHS : Compliant

RTK7WKA6W1S04000BK

Renesas Electronics Corporation

RA6Wx EK Hardware (Alt: RTK7WKA6W1S04000BK)
RoHS : Compliant

Chip-Germany GmbH

FLXC4006G-49

FORESEE

10,000

LCMXO2-4000HC-4MG132C

Lattice Semiconductor Corporation

RoHS : Compliant

10,000

MG10ADA400E

Toshiba America Electronic Components

10,000

DT02ABA400

Toshiba America Electronic Components

10,000

HCNW4504-000E

Avago Technologies

RoHS : Compliant

S3G400V3A

Fairchild Semiconductor Corporation

BAS40-04-V

Vishay Intertechnologies

RoHS : Compliant

114001.503-0000

RAFI GmbH & Co Kg

400013201 NETZANSCHLUSS

KATO Fastening Systems Inc

CPPLC1B6-24000

Cardinal Components

3234000

Wohmer

58.34.9.024.0050

FINDER SpA

RoHS : Compliant

WQV70N/2 9512240000

WeEn Semiconductor Co Ltd

4000-68000-3290000

Murmer

MC07A022-5A3-4-00 82725

Sewmer

ECCO

CE-20-LDPE-MAROON-4000

StockCap

4,000 : $0.0598

8,050

0940064000

ITT Interconnect Solutions

5 : $6.78

1,245

094-0064-000

ITT Interconnect Solutions

5 : $6.78

1,245

044-1004-000-MS

ITT Interconnect Solutions

1 : $26.52

615

040-0034-014

ITT Interconnect Solutions

5 : $4.95

151

2493064000

ITT Interconnect Solutions

1 : $37.72

119

0400059000

ITT Interconnect Solutions

1 : $96.78

040-0034-032

ITT Interconnect Solutions

5 : $12.61

100-1004-000

ITT Interconnect Solutions

1 : $19.73

19004-0005

Molex

RoHS : Compliant

1 : $0.2505

040-0054-000

ITT Interconnect Solutions

1 : $23.27

0400054000

ITT Interconnect Solutions

1 : $23.27

102-1004-000

ITT Interconnect Solutions

5 : $12.7

1031014000

ITT Interconnect Solutions

1 : $26.77

130774-0012

ITT Interconnect Solutions

2 : $24.1

Pasternack Enterprises US

PE-B400-BULK

Pasternack Enterprises

Key Specifications, Generic Name: RG8 Type with Foam Dielectric, Flex Type: Flexible, Impedance: 50 Ohm, Dielectric Type: PE (F), Jacket Diameter: 0.403 in, Jacket Material: PVC, No. of Shields: 2, Attenuation at 1 Ghz.: 6 dB, Power, Max at 1 Ghz.: 190 Watts, Frequency, Max: 4 GHz, Max Operating Temperature: 80 deg C, Center Conductor Type: Solid, Inner Conductor, Number of Strands: 1, Coax Type: Coax. Flexible RG8 Type with Foam Dielectric Coax Cable Double Shielded with Black PVC Jacket. PE-B400-BULK part number from Pasternack is a RG8 Type with Foam Dielectric coax cable that is flexible. Pasternack PE-B400 flexible coax cable is 50 Ohm and has a PE (F) dielectric. Our PE-B400 coax is constructed with a 0.403 jacket made of PVC. PE-B400 coax has a shield count of 2 and the maximum frequency for this Pasternack cable is 4 GHz. PE-B400 coax cable has an attenuation at 1 GHz of 6 dB and a maximum power of 190 watts at 1 GHz. Pasternack RG8 Type with Foam Dielectric coax cables are part of over 40,000 RF, microwave and millimeter wave components. PE-B400 cables and our other RF parts are available for same day shipping worldwide. Custom RF cable assemblies using PE-B400 or other coax can be built and shipped same day as well.

1 : $3.75
25 : $3.56
50 : $3.38
100 : $3.23

2,618

EZ-400-NMC-2-D

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Non-Solder Contact, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 6 GHz, Interface Type 1: LMR-400, Interface Type 2: PE-C400, Interface Type 3: PE-B400, Interface Type 4: PE-B405. N Male Connector Clamp/Non-Solder Contact Attachment for LMR-400, PE-C400, PE-B400, PE-B405. EZ-400-NMC-2-D type N male coaxial connector has an interface type of LMR-400, PE-C400, PE-B400, PE-B405 and a 50 Ohm impedance. Pasternack type N male connector uses shield/contact clamp/non-solder contact as an attachment method. Our male type N coaxial connector provides a minimum frequency of DC and a maximum frequency of 6 GHz. The Pasternack type N male coaxial connector has a PTFE dielectric type and a VSWR of 1.35. The Pasternack type N coaxial connector has a brass body with tri-metal plating. Our EZ-400-NMC-2-D type N connector uses beryllium copper contact. This N type male coaxial RF connector is RoHS and REACH compliant. This Pasternack male type N connector will ship the same day as purchased. Our type N male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom N type connector cable assemblies that will ship the same day as well, *LMR™ is a Trademark of Times Microwave.
RoHS : Compliant

1 : $29.73

408

PE40004

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: HD-BNC, Connector Gender: Male, Impedance: 75 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 12 GHz, Interface Type 1: Belden 4855R, Interface Type 2: Belden 1855A. 12G SDI 75 Ohm HD-BNC Male Connector Crimp/Solder Attachment for Belden 4855R, Belden 1855A. PE40004 HD-BNC male coaxial connector has an interface type of HD-BNC male Belden 4855R, Belden 1855A and a 75 Ohm impedance. Pasternack HD-BNC male connector uses shield/contact crimp/solder as an attachment method. Our male HD-BNC coaxial connector provides a minimum frequency of DC and a maximum frequency of 12 GHz. The Pasternack HD-BNC male coaxial connector has a PTFE dielectric type. The Pasternack HD-BNC coaxial connector has a brass body with nickel plating. Our PE40004 HD-BNC connector uses brass contact and a nickel plating material. This HD-BNC male coaxial RF connector is REACH compliant. This Pasternack male HD-BNC connector will ship the same day as purchased. Our HD-BNC male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom HD-BNC connector cable assemblies that will ship the same day as well.

1 : $15.39
25 : $14.62
50 : $13.85
100 : $13.24

PE15A4009

Pasternack Enterprises

Key Specifications, Frequency, Min: 50 MHz, Frequency, Max: 1 GHz, Gain, Typical: 26 dB, Gain Flatness: 0.75 dB, 1dB Compression Point, Min: 27 dBm, 3rd Intercept Point, Min: 36 dB, Voltage, DC Typ: 12 Volts, Voltage, DC Max: 15 Volts. 28 dBm P1dB, 50 MHz to 1 GHz, Medium Power GaAs Amplifier, SMA Input, SMA Output, 26 dB Gain, 5 dB NF. RF solid state power amplifier (SSPA) PE15A4009 from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a medium power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 28 dBm. Pasternack solid state power amplifier part number PE15A4009 SMA medium power amp has a 26 dB typical gain. The medium power medium gain amp is rated for a gain flatness of 0.75 dB with a P1dB of 28 dBm. Our radio frequency medium power solid state amplifier is constructed for minimum frequency of 50 MHz and a maximum frequency of 1 GHz. Additional radio frequency specs on this high frequency medium gain medium power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our medium power medium gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This medium power 28 dBm radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs.

1 : $2,010.0
5 : $1,929.6
10 : $1,849.2

PE7AP4009-40

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 40 GHz, Impedance: 50 Ohm, Power Maximum: 10 Watt, VSWR Maximum: 1.4:1, Attenuation: 40 dB, Connector Series 1: 2.92mm, Connector Gender 1: Male, Connector Series 2: 2.92mm, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 40 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Heatsink Body Rated to 10 Watts Up to 40 GHz. PE7AP4009-40 is a fixed 40 dB attenuator from Pasternack. This 40dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. The Pasternack PE7AP4009-40 40 dB attenuator is rated for up to 40 GHz. Our microwave attenuator is rated to 10 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP4009-40 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 40dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $1,510.0
5 : $1,479.8
10 : $1,449.6
25 : $1,419.4

PE3VNA4001-600

Pasternack Enterprises

1 : $11,650.0
25 : $11,067.5
50 : $10,485.0
100 : $10,019.0

PE3VNA4005-48

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-VNA-R, RF Cable Type: PE-VNA-R, RF Cable Impedance: 50 Ohm, Length: 48 inches. VNA Ruggedized Test Cable 2.4mm Male to 2.4mm Female 40GHz 48 Inch Length, RoHS., Radio frequency assembly VNA ruggedized test cable 2.4mm male to 2.4mm female 40GHz 48 inch length, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. VNA ruggedized test cable 2.4mm male to 2.4mm female 40GHz 48 inch length, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax test cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our test 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and female on end 2. This 2.4mm to 2.4mm cable is a male to female coax assembly, PE3VNA4005-48, can also be known as a test 2.4mm plug to 2.4mm jack cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm jack cable assembly PE3VNA4005-48 is built with PE-VNA-R which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3VNA4005-48 can also be used in the other direction and will be 2.4mm female to 2.4mm male cable assembly if the opposite connectivity is required. Test 2.4mm plug to 2.4mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this VNA ruggedized test cable 2.4mm male to 2.4mm female 40GHz 48 inch length, RoHS.

1 : $2,760.0
25 : $2,622.0
50 : $2,484.0

PE4-0018

Pasternack Enterprises

PE34008-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to BNC Male Cable 60 Inch Length Using PE-SR402FL Coax., Radio frequency assembly SMA male to BNC male cable 60 inch length using PE-SR402FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to BNC male cable 60 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE34008-60, can also be known as a SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE34008-60 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34008-60 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male cable 60 inch length using PE-SR402FL coax.

1 : $151.99
25 : $144.39
50 : $136.79
100 : $130.71

PE35400

Pasternack Enterprises

PE3W11400

Pasternack Enterprises

Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SHV, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SHV Plug to SHV Jack Bulkhead Cable Using RG174 Coax. PE3W11400 is a SHV plug to SHV jack bulkhead cable using RG174 coax. This Pasternack SHV plug to SHV jack bulkhead cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm SHV for connector 2. Our plug SHV to jack SHV bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W11400 SHV plug to SHV jack bulkhead cable assembly is constructed with RG174 coax.

PE3W24000

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Female Bulkhead to Smooth Bore SMP Male Bulkhead Cable Using PE-P086HF Coax. PE3W24000 is a reverse polarity TNC female bulkhead to SMP male bulkhead cable using PE-P086HF coax. This Pasternack reverse polarity TNC female bulkhead to SMP male bulkhead cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMP for connector 2. Our reverse polarity female TNC bulkhead to male SMP bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W24000 TNC reverse polarity female bulkhead to SMP male bulkhead cable assembly is constructed with PE-P086HF coax.

PE4-0021

Pasternack Enterprises

PE3C3400-72

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 72 inches. TNC Male to BNC Male Cable 72 Inch Length Using RG174 Coax., Radio frequency assembly TNC male to BNC male cable 72 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to BNC male cable 72 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and BNC cable connection on the other. Our TNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to BNC cable is a male to male coax assembly, PE3C3400-72, can also be known as a TNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to BNC plug cable assembly PE3C3400-72 is built with RG174 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 500 MHz maximum frequency TNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3400-72 can also be used in the other direction and will be BNC male to TNC male cable assembly if the opposite connectivity is required. TNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to BNC male cable 72 inch length using RG174 coax.

1 : $69.99
25 : $66.49
50 : $62.99
100 : $60.19

PE3C9400

Pasternack Enterprises

Teledyne HiRel

400G0-R Reseller

Enlace URL