 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
4606Q-S08-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
 Master Electronics | 4606X-101-223LF | Bourns Inc | Res Thick Film NET 22K Ohm 2% 0.75W(3/4W) A±100ppm/A°C BUS Conformal Coated 6-Pin SIP Pin Thru-Hole Bulk RoHS : Compliant |
| 3,862 | |
| FW-02-03-L-D-246-068 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 1SNK146061R0000 | TE Connectivity | MC512PA F (x100) Horizontal RoHS : Compliant |
| 0 | ||
| 4606H-101-151LF | Bourns Inc | Res Thick Film NET 150 Ohm 2% 1.2W ƒA€A±100ppm/ƒA€A°C BUS Conformal Coated 6-Pin SIP Pin Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
| 4606X-101-511LF | Bourns Inc | Res Thick Film NET 510 Ohm 2% 0.75W(3/4W) ±100ppm/°C BUS Conformal Coated 6-Pin SIP Pin Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
| 4606X-102-105LF | Bourns Inc | Thick Film Conformal Coated Network Resistors RoHS : Compliant |
| 0 | ||
| 4606X-102-150LF | Bourns Inc | Res Thick Film NET 15 Ohm 1 Ohm 0.75W(3/4W) ±250ppm/°C ISOL Conformal Coated 6-Pin SIP Pin Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
| 4606X-102-394LF | Bourns Inc | Thick Film Conformal Coated Network Resistors RoHS : Compliant |
| 0 | ||
| 4606X-102-682LF | Bourns Inc | Res Thick Film NET 6.8K Ohm 2% 0.75W(3/4W) A±100ppm/A°C ISOL Conformal Coated 6-Pin SIP Pin Thru-Hole Bulk RoHS : Compliant |
| 0 | ||
| 121144-6061 | ITT Interconnect Solutions | CA06EW28-11P-B-02 / 121144-6061 / Circular RoHS : Not Compliant |
| 0 | ||
| 586-4606-103F | Dialight | 586 Cluster Based LED 15mm Bayonet (BA15s) White 14V RoHS : Not Compliant |
| 0 | ||
| MTMM-146-06-F-S-065 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-146-06-L-Q-065 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-46-06-F-6-465-090 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-46-06-F-Q-435-090 | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Avnet Americas | 1-794606-1 | TE Connectivity | - Tape and Reel (Alt: 1-794606-1) RoHS : Compliant |
| 165,000 | |
| 794606-1 | TE Connectivity | - Tape and Reel (Alt: 794606-1) RoHS : Compliant |
| 135,000 | ||
| 794606-3 | TE Connectivity | - Tape and Reel (Alt: 794606-3) RoHS : Not Compliant |
| 48,662 | ||
| 4606X-101-103LF | Bourns Inc | - Bulk (Alt: 4606X-101-103LF) RoHS : Compliant |
| 6,801 | ||
| 4606X-102-103LF | Bourns Inc | - Bulk (Alt: 4606X-102-103LF) RoHS : Compliant |
| 2,449 | ||
| 4606X-101-104LF | Bourns Inc | - Bulk (Alt: 4606X-101-104LF) RoHS : Compliant |
| 2,257 | ||
| 4606X-101-203LF | Bourns Inc | - Bulk (Alt: 4606X-101-203LF) RoHS : Compliant |
| 1,457 | ||
| 4606X-102-104LF | Bourns Inc | - Bulk (Alt: 4606X-102-104LF) RoHS : Compliant |
| 348 | ||
| 4606X-101-102LF | Bourns Inc | - Bulk (Alt: 4606X-101-102LF) RoHS : Compliant |
| 198 | ||
| 4606X-101-222LF | Bourns Inc | Fixed Network Resistor, 2.2 kohm, Bussed, 5 Resistors, SIP, PC Pin, ? 2% - Bulk (Alt: 4606X-101-222LF) RoHS : Compliant |
| 23 | ||
| B32776E4606J | TDK Corporation | Metallized Polypropylene Film Capacitor 60uF 450VDC 5% Radial - Bulk (Alt: B32776E4606J000) RoHS : Compliant |
| 0 | ||
| 4606H-101-151LF | Bourns Inc | - Bulk (Alt: 4606H-101-151LF) RoHS : Compliant |
| 0 | ||
| 4606X-101-223LF | Bourns Inc | - Bulk (Alt: 4606X-101-223LF) RoHS : Compliant |
| 0 | ||
| 4606X-101-511LF | Bourns Inc | - Bulk (Alt: 4606X-101-511LF) RoHS : Compliant |
| 0 | ||
| 4606X-102-105LF | Bourns Inc | - Bulk (Alt: 4606X-102-105LF) RoHS : Compliant |
| 0 | ||
 Newark | 1-794606-2 | TE Connectivity | Contact, Socket, 24-20Awg, Crimp; |Te Connectivity Amp 1-794606-2 RoHS : Compliant |
| 46,911 | |
| 1-794606-2 | TE Connectivity | Contact, Socket, 24-20Awg, Crimp; |Te Connectivity Amp 1-794606-2 RoHS : Compliant |
| 2,776 | ||
| 9794 6061000 | Belden Inc | Multiconductor Cable, Unshielded; |Belden 9794 6061000 RoHS : Compliant |
| 2,000 | ||
| SIR4606DP-T1-GE3 | Vishay Intertechnologies | Mosfet, N-Ch, 60V, 16A, Powerpak So-8S; |Vishay SIR4606DP-T1-GE3 RoHS : Compliant |
| 1,949 | ||
| SIR4606DP-T1-GE3 | Vishay Intertechnologies | Mosfet, N-Ch, 60V, 16A, Powerpak So-8S; |Vishay SIR4606DP-T1-GE3 RoHS : Compliant |
| 1,949 | ||
| 77313-446-06LF | Amphenol Communications Solutions | Conn, Header, 6Pos, 2Row, 2.54Mm; Connector Systems:Board-To-Board; Pitch Spacing:2.54Mm; No. Of Rows:2Rows; No. Of Contacts:6Contacts; Contact Termination Type:Through Hole Straight; Product Range:Bergstik 77313 Series Rohs Compliant: Yes RoHS : Compliant |
| 1,678 | ||
| 9946 060100 | Belden Inc | Shielded Multiconductor Cable, 10 Conduc; |Belden 9946 060100 RoHS : Compliant |
| 801 | ||
| 4606 | Keystone Electronics Corp | Transistor Socket, 3 Position, Through Hole; No. Of Contacts:3Contacts; Connector Type:To-3 Socket; Pitch Spacing:-; Product Range:-; Row Pitch:-; Contact Material:Brass; Contact Plating:Tin Plated Contacts; Body Length:1.35" Rohs Compliant: Yes RoHS : Compliant |
| 381 | ||
| 74437346068 | Wurth Elektronik | Inductor, 6.8Uh, 8A, We-Lhmi 7030; |Würth Elektronik 74437346068 RoHS : Compliant |
| 292 | ||
| 74437346068 | Wurth Elektronik | Inductor, 6.8Uh, 8A, We-Lhmi 7030; |Würth Elektronik 74437346068 RoHS : Compliant |
| 292 | ||
| 4606X-101-223LF | Bourns Inc | Nw Res Fixed, 22K, Bussed, 5Resistors; |Bourns, Inc. 4606X-101-223LF RoHS : Compliant |
| 83 | ||
| 4304.6061 | Schurter Electronic Components | Un-Filtered Iec Power Entry Module; |Schurter 4304.6061 RoHS : Compliant |
| 70 | ||
| TW-46-06-G-Q-430-090 | Samtec Inc | Conn Stack Brd, 2Mm, 184Pos, Hdr; |Samtec, Inc. TW-46-06-G-Q-430-090 RoHS : Compliant |
| 47 | ||
| 8446 060100 | Belden Inc | Unshielded Multiconductor Cable 6 Conduc; |Belden 8446 060100 RoHS : Compliant |
| 22 | ||
| 0460660011 | Weidmüller Interface GmbH & Co. KG | Dek 5 Fsz 11-20 |Weidmuller 0460660011 RoHS : Compliant |
| 11 | ||
 Analog Devices Inc | MAX14606EWL+T | Analog Devices Inc | Overvoltage Protector with Rev RoHS : Compliant |
| 15,408 | |
| MAX4606CSE+T | Analog Devices Inc | 5OHM, Quad, SPST, CMOS Analog RoHS : Compliant |
| 2,500 | ||
| MAX4606CSE+ | Analog Devices Inc | 5Ohm, Quad, SPST, CMOS Analog RoHS : Compliant |
| 1,260 | ||
| MAX4606ESE+ | Analog Devices Inc | 5Ohm, Quad, SPST, CMOS Analog RoHS : Compliant |
| 894 | ||
| LTM4606MPY#PBF | Analog Devices Inc | Ultralow EMI 28VIN,6A DC/DC mi RoHS : Compliant |
| 618 | ||
| LTM4606EV#PBF | Analog Devices Inc | Ultralow EMI 28VIN,6A DC/DC mi RoHS : Compliant |
| 397 | ||
| LTM4606MPY | Analog Devices Inc | Ultralow EMI 28VIN,6A DC/DC mi RoHS : Not Compliant |
| 262 | ||
| LTM4606IV#PBF | Analog Devices Inc | Ultralow EMI 28VIN,6A DC/DC mi RoHS : Compliant |
| 87 | ||
| LTM4606MPV#PBF | Analog Devices Inc | Ultralow EMI 28VIN,6A DC/DC mi RoHS : Compliant |
| 16 | ||
| LTM4606IY | Analog Devices Inc | Ultralow EMI 28VIN,6A DC/DC mi RoHS : Not Compliant |
| 1 | ||
| LTM4606IY#PBF | Analog Devices Inc | Ultralow EMI 28VIN,6A DC/DC mi RoHS : Compliant |
| 0 | ||
| LTM4606EY#PBF | Analog Devices Inc | Ultralow EMI 28VIN,6A DC/DC mi RoHS : Compliant |
| 0 | ||
| MAX4606ESE+T | Analog Devices Inc | 5OHM, Quad, SPST, CMOS Analog RoHS : Compliant | 0 | |||
| MAX14606EWL+ | Analog Devices Inc | Overvoltage Protector with Rev RoHS : Compliant | 0 | |||
 RS | 1-794606-2 | TE Connectivity | MICRO MNL CONTACTS, MICRO MNL RPT CNT STRP 30AU LF RoHS : Compliant |
| 33,834 | |
| 4606X-101-560LF | Bourns Inc | RESISTOR, 56 OHMS, 0.75 W, 2 %, 100 V (MAX.) RoHS : Compliant |
| 750 | ||
| 4606X-101-471LF | Bourns Inc | RESISTOR, 470 OHMS, 0.75 W, 2 %, 100 V (MAX.), 100 PPM/ DEGC, SIP RoHS : Compliant |
| 688 | ||
| 4606X-101-223LF | Bourns Inc | RESISTOR, NTWK, SIP, 22K OHMS, TOL 2%,PWR RATING 0.75W,100V MAX, 100PPM, BUSSED RoHS : Compliant |
| 278 | ||
| 2474606-4 | TE Connectivity | SWITCH, SPST, EXTENDED ILLUMINATED ACTUATOR, GOLD/BRASS CONTACT, SEALED, IP67 |
| 120 | ||
| 2474606-7 | TE Connectivity | SWITCH, SPST, EXTENDED ILLUMINATED ACTUATOR, GOLD/BRASS CONTACT, SEALED, IP67 |
| 120 | ||
| BI2-M12-AP6X-H1141 (46065) | TURCK Inc | INDUCTIVE PROXIMITY SENSOR,2MM, PNP-NO,10-30VDC,200MA, M12 TREADED FLUSH, IP67 |
| 114 | ||
| BI2-G12-AP6X-H1141 (4606595) | TURCK Inc | SENSOR M12 X 1 10 TO 30 VDC 200 MA (MAX.) (OPERATING) INDUCTIVE, BI 2-G12 SERIES |
| 14 | ||
| 1884606 | RS Pro | CERAMIC CARTRIDGE FUSE 25A 600V GPV FUSE SPEED 10 X 38MM FUSE SIZE SOLDER TAG |
| 3 | ||
| BF5000A46060 | Lovato Electric Inc | THREE-POLE CONTACTOR, IEC 50A, AC COIL 60HZ, 460 VAC |
| 2 | ||
| 8446 060100 | Belden Inc | MULTICONDUCTOR CABLE, 4+2C/22+18AWG, TC, CHROME PVC |
| 1 | ||
| 9946 060100 | Belden Inc | MULTICONDUCTOR CABLE, 10C/22AWG, 7X30, TC, PVC INS, FOIL&BRAID, CHROME PVC |
| 1 | ||
| 586-4606-103F | Dialight | LAMP, LED, 15MM, S.C. BAYONET, WHITE, 14VDC, 20MA, 23800MCD, 100000 HRS RoHS : Compliant |
| 1 | ||
| 4606 | 80/20 Inc | M8 X 1.25 EXTENDED TUBE INSERT |
| 0 | ||
| 4606 | Keystone Electronics Corp | TRANSISTOR SOCKET, CHASIS MOUNT, FOR TO-3 TRANSISTOR RoHS : Compliant |
| 0 | ||
 Microchip Technology Inc | MIC4606-2YML-T5 | Microchip Technology Inc | 85V Full Bridge FET Driver, VQFN, Projected EOL: 2028-01-08 RoHS : Compliant |
| 5,500 | |
| MIC4606-2YML-TR | Microchip Technology Inc | 85V Full Bridge FET Driver, VQFN, Projected EOL: 2041-10-19 RoHS : Compliant |
| 2,200 | ||
MIC4606-2YTS-TR | Microchip Technology Inc | 85V Full Bridge FET Driver, TSSOP, Projected EOL: 2041-10-19 RoHS : Compliant |
| 1,958 | ||
| MIC4606-2YML-EV | Microchip Technology Inc | MIC4606-2YML Evaluation Board, Projected EOL: |
| 5 | ||
| MIC4606-1YML | Microchip Technology Inc | 85V Full Bridge FET Driver, VQFN, Projected EOL: 2028-01-08 - Contact for Pricing RoHS : Compliant | 0 | |||
| 994-94606-0602 | Microchip Technology Inc | PTP Translator, Fibre Eth,TCXO,HV PSU,AM O/P,Security on, 3.21r8, HVPower, Projected EOL: 2051-01-12 - Contact for Pricing | 0 | |||
| 994-94606-0601 | Microchip Technology Inc | PTP Translator, Fibre Eth,TCXO,HV PSU,AM O/P,Security on, 3.21r8, HVPower, Projected EOL: 2051-01-12 - Contact for Pricing | 0 | |||
| MIC4606-1YML-EV | Microchip Technology Inc | MIC4606-1YML Evaluation Board, Projected EOL: |
| 0 | ||
| MIC4606-1YML-TR | Microchip Technology Inc | 85V Full Bridge FET Driver, VQFN, Projected EOL: 2041-08-14 RoHS : Compliant |
| 0 | ||
| MIC4606-1YTS-T5 | Microchip Technology Inc | 85V Full Bridge FET Driver, TSSOP, Projected EOL: 2027-03-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC4606-1YML-T5 | Microchip Technology Inc | 85V Full Bridge FET Driver, VQFN, Projected EOL: 2028-01-08 RoHS : Compliant |
| 0 | ||
| MIC4606-1YTS-TR | Microchip Technology Inc | 85V Full Bridge FET Driver, TSSOP, Projected EOL: 2041-10-19 RoHS : Compliant |
| 0 | ||
 Bisco Industries | 46068-0406S | SOCKET SCREWS | 186 | |||
| 460632X250 | PSM International | 163 | ||||
| CR3214-6-06 | Cherry Aerospace | 70 | ||||
| 1-794606-2 | TE Connectivity | RoHS : Compliant | 58 | |||
| 4606 | Keystone Electronics Corp | RoHS : Compliant | 56 | |||
| 4606 | MISCELLANEOUS | 50 | ||||
| 46068-0806S | SOCKET SCREWS | 48 | ||||
| 15092-046-060D | Accurate Screw Machine | 25 | ||||
| 46066-0038 | Crescent Manufacturing | 15 | ||||
| 15546-.060-.030D1 | Accurate Screw Machine | 7 | ||||
| 7000046069 | 3M Interconnect | 4 | ||||
 Rochester Electronics | LPC54606J512BD100E | NXP Semiconductors | IC MCU ARM® Cortex®-M4F 32Bit 1 Core FLASH 512kB (512k x 8) 180MHz 100-QFP Tray RoHS : Compliant |
| 100,110 | |
LPC54606J256ET180E | NXP Semiconductors | IC MCU ARM® Cortex®-M4F 32Bit 1 Core FLASH 256kB (256k x 8) 180MHz 180-BGA Tray RoHS : Compliant |
| 9 | ||
| LPC54606J256BD100E | NXP Semiconductors | IC MCU ARM® Cortex®-M4F 32Bit 1 Core FLASH 256kB (256k x 8) 180MHz 100-QFP Tray RoHS : Compliant |
| 3 | ||
| LTM4606MPV#PBF | Analog Devices Inc | DC/DC CONVERTER 1 OUT 600mV to 5V 6A 30W 133-LGA Tray RoHS : Compliant |
| 16 | ||
| DB2460600L | ROHM Semiconductor | Zener Diode |
| 42,000 | ||
CLA4606-000 | Skyworks Solutions Inc | PIN Diode Standard - Single 45V 650mW Die RoHS : Compliant |
| 1 | ||
 Sager | 4606 | Keystone Electronics Corp | IC & Component Sockets XSTR SKT TO-3CHS MTG RoHS : Compliant |
| 0 | |
| 1SNK146061R0000 | TE Connectivity | Terminal Block Tools & Accessories MC512PA F (x100) Horizontal RoHS : Compliant | 0 | |||
| XP3A-3846-0650D-D/S | Aratas Corporation | Contact Probes ContactProbe D Shape .4mmPitch 4.95mm L | 0 | |||
| YTW-46-06-S-Q-400-050 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| AH1460619-A | Panasonic Electronic Components | SNAP ACTION SWITCHES PCB MOUNT RoHS : Compliant |
| 0 | ||
| FW-04-05-F-D-446-065-A | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Micro Board Stacking Header, 0.050 Pitch RoHS : Compliant |
| 0 | ||
| TSW-146-06-S-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| SSW-146-06-F-T | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| SSW-146-06-L-D | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| 1-460680-0 | TE Connectivity | Bench Top Tools FEED FINGER ASSY | 0 | |||
| 1-794606-2 | TE Connectivity | Pin & Socket Connectors SKT 24-20 PHBR/AU Reel of 15000 RoHS : Compliant |
| 0 | ||
| 0527460670 | Molex | FFC & FPC Connectors .5MM REC 06P RA SMT BOT RoHS : Compliant |
| 0 | ||
| MTMM-146-06-L-Q-070 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MPCC-2-24-2-L-46-06.00-S | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| EKMC4606813K | Panasonic Electronic Components | Board Mount Motion & Position Sensors High Density Long Distance |
| 0 | ||
 Coilcraft Direct | 146-06J08SL | Coilcraft Inc | RF inductor, tunable, Carbonyl J core, shielded, RoHS RoHS : Compliant |
| 665 | |
| 146-06J08L | Coilcraft Inc | RF inductor, tunable, Carbonyl J core, RoHS RoHS : Compliant |
| 416 | ||
| 146-06A08L | Coilcraft Inc | RF inductor, tunable, aluminum core, RoHS RoHS : Compliant |
| 0 | ||
| 146-06L | Coilcraft Inc | RF inductor, no core, RoHS RoHS : Compliant |
| 0 | ||
 TME | 10146065-113A0LF | Amphenol Corporation | Connector: for cards; data transfer; gold-plated; PIN: 164 |
| 2,985 | |
| BF3800A46060 | Lovato Electric Inc | Contactor: 3-pole; NO x3; 460VAC; 38A; for DIN rail mounting; BF |
| 0 | ||
| 460619 BL005 | Alpha Wire | Wire; HookUp Wire; stranded; Cu; 6AWG; PVC; blue; 600V; 30.5m; 1x6AWG |
| 0 | ||
| 4606X-101-223LF | Bourns Inc | Resistor network: X; 22kΩ; ±2%; No.of resistors: 5; 0.2W; THT; 100V RoHS : Compliant |
| 0 | ||
| 4606X-101-511LF | Bourns Inc | Resistor network: X; 510Ω; ±2%; No.of resistors: 5; 0.2W; THT; 100V RoHS : Compliant |
| 0 | ||
| 4606X-102-105LF | Bourns Inc | Resistor network: Y; 1MΩ; ±2%; No.of resistors: 3; 0.3W; THT; 100V RoHS : Compliant |
| 0 | ||
| 1646060000 | Weidmüller Interface GmbH & Co. KG | Connector: pluggable terminal block; power supply; OMNIMATE; 12A RoHS : Compliant |
| 0 | ||
| 03446066 | GSR | Drill: for metal; Ø: 6.6mm; L: 101mm; Working part len: 63mm; TiN |
| 0 | ||
| 7000-46061-8021200 | Murrelektronik GmbH | Cable: for sensors; PIN: 6; M12 male angled,M12 female angled |
| 0 | ||
| 7014-46061-5220030 | Murrelektronik GmbH | Cable: for sensors; PIN: 6; M12 male angled,M12 female angled |
| 0 | ||
| 0460660011 | Weidmüller Interface GmbH & Co. KG | Marker: connectors; white; 5mm; -40÷100°C; vertical RoHS : Compliant |
| 0 | ||
| BF11500A46060 | Lovato Electric Inc | Contactor: 3-pole; NO x3; 460VAC; 115A; for DIN rail mounting; BF |
| 0 | ||
| BF18T4A46060 | Lovato Electric Inc | Contactor: 4-pole; NO x4; 460VAC; 18A; for DIN rail mounting; BF |
| 0 | ||
| BF5000A46060 | Lovato Electric Inc | Contactor: 3-pole; NO x3; 460VAC; 50A; for DIN rail mounting; BF |
| 0 | ||
| 7000-46061-8020440 | Murrelektronik GmbH | Cable: for sensors; PIN: 6; M12 male angled,M12 female angled |
| 0 | ||
 ComSIT USA | AO4606 | alpha & omega | Small Signal Field-Effect Transistor, 6A I(D), 30V, 2-Element, N-Channel and P-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 5,670 | ||
| MGA64606BLKG | Avago Technologies | LOW NOISE AMPLIFIER WITH SWITCHABLE BYPASS/SHUTDOWN MODE IN LOW PROFILE PACKAGE Wide Band Low Power Amplifier, 1500MHz Min, 3000MHz Max, 1 Func, GAAS RoHS : Compliant | 1,000 | |||
| LPC54606J256BD100551 | NXP Semiconductors | ARM� Cortex�-M4 LPC546xx Mikrocontroller IC 32-Bit Single-Core 180MHz 256KB RoHS : Compliant | 484 | |||
| 7946061 | TE Connectivity | RECT CONN CONTACT Socket 20-24 AWG Crimp Tin T/R RoHS : Compliant | 250 | |||
| LPC54606J512BD100 | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, 180MHz, CMOS, PBGA100 RoHS : Compliant | 74 | |||
| LTM4606IV | Linear Technology | Electronic Component RoHS : Compliant | 14 | |||
| LPC54606J256BD100K | NXP Semiconductors | IC MCU ARM� Cortex�-M4F 32Bit 1 Core FLASH 256kB (256k x 8) 180MHz 100-QFP Tray RoHS : Compliant | 7 | |||
 Interstate Connecting Components | 1-794606-2 | TE Connectivity | MICRO MNL RPT CNT STRP 30AU LF RoHS : Compliant |
| 4,500 | |
| 1-794606-2 | TE Connectivity | MICRO MNL RPT CNT STRP 30AU LF RoHS : Compliant |
| 900 | ||
| 4606 | Keystone Electronics Corp | RoHS : Compliant |
| 27 | ||
| C146 10F024 606 1 | Amphenol Sine Systems | HOUSING | 0 | |||
| C146 10G024 606 8 | Amphenol Sine Systems | HOUSING | 0 | |||
| 10146065-113A0LF | Amphenol FCi | 10146065-113A0LF-PCI EXPRESS 4 RoHS : Compliant |
| 0 | ||
| 000460640 | ITT Interconnect Solutions | FRCIR08F-22-14S-F80-VO | 0 | |||
| 77313-446-06LF | Amphenol FCi | BERGSTIK HDR DR STR-77313-446- RoHS : Unknown | 0 | |||
| 2-460680-5 | TE Connectivity | FEED FINGER ASS Y |
| 0 | ||
| YK4460603000G | Amphenol Anytek | YK- 446- 6P BLACK - COMBINAT | 0 | |||
| 2-1879460-6 | TE Connectivity | RL73N 1J R11 1% 1K RL RoHS : Compliant |
| 0 | ||
| 10146067-110C0LF | Amphenol FCi | PCI EXPRESS 4.0 SMT ASSY-10146 | 0 | |||
| 10132446-06LF | Amphenol FCi | 10132446-06LF-MINITEK PWR3.0 H RoHS : Unknown | 0 | |||
| 10146065-123Z0LF | Amphenol FCi | PCI EXPRESS 4.0 SMT ASSY-10146 RoHS : Compliant | 0 | |||
| 1734606-6 | TE Connectivity | AMPMODU, 2MM PITCH, 6P, R/A SM RoHS : Compliant |
| 0 | ||
 NexGen Digital | 146-06J08SL | Coilcraft Inc | RoHS : Compliant | 3,870 | ||
| 511460600 | Molex | 2,000 | ||||
| 4606X-101-101LF | Bourns Inc | RoHS : Compliant | 554 | |||
 PEI Genesis | 1461040-275-125-460-651-0 | ISC Engineering |
| 60 | ||
| 1461080-400-125-460-651-0 | ISC Engineering |
| 40 | |||
| 1461080-300-062-460-651-0 | ISC Engineering |
| 5 | |||
| 1461080-300-125-460-651-0 | ISC Engineering |
| 3 | |||
| 1461040-300-062-460-651-0 | ISC Engineering |
| 1 | |||
| 1461080-300-E-460X460-651-0 | ISC Engineering |
| 0 | |||
| 586-4606-103F | Dialight | RoHS : Compliant |
| 0 | ||
| 586-4606-103 | Dialight | RoHS : Not Compliant |
| 0 | ||
| 1461080-250-062460X460-651-0 | ISC Engineering |
| 0 | |||
| 1461040-350-125-460-651-0 | ISC Engineering |
| 0 | |||
| 1461080-350-125-460-651-0 | ISC Engineering |
| 0 | |||
| C146-10F024-606-1 | Amphenol Tuchel |
| 0 | |||
| 1465080-300-125-460-651-0 | ISC Engineering |
| 0 | |||
| 1461080-275-B-460X460-651-0 | ISC Engineering |
| 0 | |||
| 10-646069-126 | Amphenol Corporation |
| 0 | |||
 Powell Electronics | 8-215460-6 | TE Connectivity | Cable Connectors RoHS : Compliant |
| 495 | |
| 88-443746-06E | Amphenol Corporation | PLUG |
| 208 | ||
| 88-443546-06E | Amphenol Corporation | PLUG |
| 208 | ||
| HW-08-20-T-S-846-060-002 | Samtec Inc | High-Reliability Tiger Eye Socket Strips RoHS : Compliant |
| 172 | ||
| MTMM-146-06-G-Q-197 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 46 | ||
| 87-443246-06P | Amphenol Corporation | PLUG |
| 40 | ||
| 87-443246-06S | Amphenol Corporation | PLUG |
| 40 | ||
| TW-46-06-G-Q-430-090 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 31 | ||
| 88-443546-06S | Amphenol Corporation | PLUG |
| 30 | ||
| 88-443746-06S | Amphenol Corporation | PLUG |
| 30 | ||
| 1-794606-2 | TE Connectivity | Micro MNL - Terminals RoHS : Compliant |
| 21 | ||
| 88-444606-30P | Amphenol Corporation | PLUG |
| 2 | ||
| 88-443046-06P | Amphenol Corporation | PLUG |
| 1 | ||
| 88-443046-06F | Amphenol Corporation | PLUG |
| 1 | ||
| 88-443246-06Z | Amphenol Corporation | PLUG |
| 1 | ||
 PUI | 12.94606 | 401 | ||||
 Richardson RFPD | MIC4606-2YML-TR | Microchip Technology Inc | Driver 1A 4-OUT High Side/Low Side Full Brdg Non-I RoHS : Compliant | 0 | ||
| LTM4606IY#PBF | Analog Devices Inc | Module DC-DC 1-OUT 0.6V to 5V 6A Automotive 133-Pi RoHS : Compliant |
| 0 | ||
| K-8846-060-10 | Winchester Interconnect | RF COAXIAL CABLE RoHS : Compliant | 0 | |||
| R164606000 | Radiall | Conn QN 0Hz to 6GHz 50Ohm Solder Cup ST Panel Moun RoHS : Compliant |
| 0 | ||
| LTM4606IV#PBF | Analog Devices Inc | Module DC-DC 1-OUT 0.6V to 5V 6A 133-Pin LGA Tray RoHS : Compliant |
| 0 | ||
| MIC4606-1YML-EV | Microchip Technology Inc | Full-Bridge MOSFET Driver Evaluation Board RoHS : Compliant |
| 0 | ||
| R404606651 | Radiall | RF COAX TERMINATION | 0 | |||
| LTM4606MPY | Analog Devices Inc | Module DC-DC 1-OUT 0.6V to 5V 6A 133-Pin BGA Tray RoHS : Not Compliant |
| 0 | ||
| R164606020 | Radiall | Coaxial Connector RoHS : Not Compliant | 0 | |||
| LTM4606EY#PBF | Analog Devices Inc | Module DC-DC 1-OUT 0.6V to 5V 6A 133-Pin BGA Tray RoHS : Compliant |
| 0 | ||
| LTM4606IY | Analog Devices Inc | Module DC-DC 1-OUT 0.6V to 5V 6A 133-Pin BGA Tray RoHS : Not Compliant |
| 0 | ||
| K-8846-060-06 | Winchester Interconnect | RF COAXIAL CABLE RoHS : Compliant | 0 | |||
| CLA4606-000 | Skyworks Solutions Inc | PIN Diode 45V 200mA 2-Pin Die RoHS : Compliant |
| 0 | ||
| LTM4606MPV#PBF | Analog Devices Inc | Module DC-DC 1-OUT 0.6V to 5V 6A Automotive 133-Pi RoHS : Compliant |
| 0 | ||
| R164606120 | Radiall | RF COAX PNL MT CONN | 0 | |||
 Rutronik | 527460671 | Molex | 06P FFC/FPC ZIF SMT 90° Au RoHS : Compliant |
| 19,000 | |
| 4304.6064 | Schurter Electronic Components | 6762 POWER ENTRY MODUL 10A 70°C RoHS : Compliant |
| 600 | ||
 Chip 1 Exchange | 794606-1 | TE Connectivity | INSTOCK RoHS : Compliant | 608,400 | ||
| 0034.6062 | INSTOCK | 4,456 | ||||
| 1700346067 | L&S | INSTOCK | 2,799 | |||
| 4606X101222 | Bourns Inc | INSTOCK | 2,500 | |||
| C1146068 | INSTOCK | 2,220 | ||||
| 4-134606P | KSG | INSTOCK | 2,107 | |||
| RN4606 | INSTOCK | 1,906 | ||||
| 4606X-102-682 | INSTOCK | 1,100 | ||||
| 4606X-102-103LF | INSTOCK | 1,005 | ||||
| 4606X-102-201 | INSTOCK | 500 | ||||
| 12.94606 | Geyer Electronic E K | INSTOCK RoHS : Compliant | 401 | |||
| 4606X-101-473LF | INSTOCK | 64 | ||||
| 4606X-101-222LF | INSTOCK | 52 | ||||
| MIC4606-2YML | Microchip Technology Inc | INSTOCK RoHS : Compliant | 23 | |||
| 7-215460-6 | TE Connectivity | INSTOCK RoHS : Compliant | 5 | |||
 Avnet Abacus | 794606-1 | TE Connectivity | Contact Micro MATENLOK Socket Crimp 20 AWG Tin Plated Contacts Micro MATENLOK Connectors (Alt: 794606-1) RoHS : Compliant | 345,000 | ||
| 1-794606-2 | TE Connectivity | Contact Micro MATENLOK Socket Crimp 20 AWG Gold Plated Contacts (Alt: 1-794606-2) RoHS : Compliant | 75,000 | |||
| 527460671 | Molex | FFCFPC Connector Socket 6 Position 05 mm Solder Right Angle Surface Mount Emboss TR - Tape and Reel (Alt: 527460671) RoHS : Compliant | 35,000 | |||
| 15246060 | Molex | Pin Header BoardtoBoard Power WiretoBoard 42 mm 2 Rows 6 Contacts (Alt: 15246060) RoHS : Compliant | 1,955 | |||
| 4606X-102-103LF | Bourns Inc | Resistor Network 10 kOhm 2 750 mW 3 Resistors Isolated SIP PC Pin Through Hole (Alt: 4606X-102-103LF) RoHS : Compliant | 1,000 | |||
| FN284-6-06 | TE Connectivity | (Alt: 800338-SF) RoHS : Compliant | 120 | |||
| 1646060000 | Weidmüller Interface GmbH & Co. KG | Conn Board to Board SKT 5 POS 508mm Solder RA ThruHole (Alt: 1646060000) RoHS : Compliant | 0 | |||
| 0460660011 | Weidmüller Interface GmbH & Co. KG | (Alt: 0460660011) RoHS : Compliant | 0 | |||
| 4606H-101-151LF | Bourns Inc | (Alt: 4606H-101-151LF) RoHS : Compliant | 0 | |||
| 4606X-101-223LF | Bourns Inc | Resistor Network 22 kOhm 2 750 mW 5 Resistors Bussed SIP PC Pin Through Hole Thick Film (Alt: 4606X-101-223LF) RoHS : Compliant | 0 | |||
| 4606X-101-511LF | Bourns Inc | Resistor Network 510 Ohm 2 750 mW 5 Resistors Bussed SIP PC Pin Through Hole Thick Film (Alt: 4606X-101-511LF) RoHS : Compliant | 0 | |||
| 4606X-102-105LF | Bourns Inc | Resistor Network 1 M Ohm 2 750 mW 3 Resistors Isolated SIP PC Pin Through Hole (Alt: 4606X-102-105LF) RoHS : Compliant | 0 | |||
| 4606X-102-150LF | Bourns Inc | Resistor Network 15 Ohm 1 750 mW 3 Resistors Isolated SIP PC Pin Through Hole (Alt: 4606X-102-150LF) RoHS : Compliant | 0 | |||
| 4606X-102-394LF | Bourns Inc | Resistor Network 390 kOhm 2 750 mW 3 Resistors Isolated SIP PC Pin Through Hole (Alt: 4606X-102-394LF) RoHS : Compliant | 0 | |||
| 4606X-102-682LF | Bourns Inc | Resistor Network 68 kOhm 2 750 mW 3 Resistors Isolated SIP PC Pin Through Hole (Alt: 4606X-102-682LF) RoHS : Compliant | 0 | |||
Avnet Asia | 046824606000846+ | KYOCERA Corporation | (Alt: 046824606000846+) RoHS : Compliant |
| 72,000 | |
| 10146065-112S0LF | Amphenol Corporation | Connector Card Edge Receptacle 98 Position 1mm Straight Surface Mount (Alt: 10146065-112S0LF) RoHS : Compliant | 2,100 | |||
| 1-794606-2 | TE Connectivity | (Alt: 1-794606-2) RoHS : Compliant | 0 | |||
| 10146067-110C0LF | Amphenol Corporation | PCI Express GEN 4 Card Edge Connector Socket 36 Position 1mm Solder Straight Surface Mount Tray (Alt: 10146067-110C0LF) RoHS : Compliant |
| 0 | ||
| 10146065-110C0LF | Amphenol Corporation | Conn PCI Express Card 36 POS 1mm Solder ST SMD Tray (Alt: 10146065-110C0LF) RoHS : Compliant | 0 | |||
| 10146069-111C0LF | Amphenol Corporation | (Alt: 10146069-111C0LF) RoHS : Compliant | 0 | |||
| 10146065-112Y0LF | Amphenol Corporation | PCI Express Gen 4 and Gen 5 Card Edge Connector Socket 98 Position 1mm Straight Surface Mount Tray (Alt: 10146065-112Y0LF) RoHS : Compliant | 0 | |||
| 10146065-113X0LF | Amphenol Corporation | Conn PCI Express Card 164 POS 1mm Solder ST SMD Tray (Alt: 10146065-113X0LF) RoHS : Compliant | 0 | |||
| 10146065-113F0LF | Amphenol Corporation | PCI Express GEN 4 Card Edge Connector Socket 164 Position Straight Surface Mount (Alt: 10146065-113F0LF) RoHS : Compliant | 0 | |||
| 10146069-121T0LF | Amphenol Corporation | FCI10146069-121T0LF SSIO,PCIE 64P SMT ST (Alt: 10146069-121T0LF) RoHS : Compliant | 0 | |||
| 10146069-120T0LF | Amphenol Corporation | FCI10146069-120T0LF SSIO,PCIE 36P SLD ST (Alt: 10146069-120T0LF) RoHS : Compliant | 0 | |||
| 10146069-112Y0LF | Amphenol Corporation | 10146069-112Y0LF-PCI EXPRESS GEN 5 (Alt: 10146069-112Y0LF) RoHS : Compliant | 0 | |||
| 10146065-111S0LF | Amphenol Corporation | 10146065-111S0LF-PCI EXPRESS 4.0 SMT ASSY (Alt: 10146065-111S0LF) RoHS : Compliant | 0 | |||
| 10146069-121C0LF | Amphenol Corporation | FCI10146069-121C0LF CONNECTOR, PCIE GEN5 (Alt: 10146069-121C0LF) RoHS : Compliant | 0 | |||
| 1-794606-3 | TE Connectivity | (Alt: 1-794606-3) RoHS : Compliant | 0 | |||
 Avnet Silica | LPC54606J512ET100E,551 | NXP Semiconductors | MCU 32Bit LPC546xx ARM Cortex M4 RISC 512KB Flash 17V to 36V 100Pin TFBGA Tray (Alt: LPC54606J512ET100E) RoHS : Compliant | 2,860 | ||
| MIC4606-2YML-TR | Microchip Technology Inc | MOSFET Driver Dual Full Bridge 1 A 55 V to 16 V 35 ns 16 Pins QFNEP (Alt: MIC4606-2YML-TR) RoHS : Compliant | 0 | |||
| MIC4606-1YML-TR | Microchip Technology Inc | MOSFET DRVR 1A 2OUT HiLo Side NonInv 16Pin QFN TR (Alt: MIC4606-1YML-TR) RoHS : Compliant | 0 | |||
| MIC4606-2YTS-TR | Microchip Technology Inc | (Alt: MIC4606-2YTS-TR) RoHS : Compliant | 0 | |||
| MIC4606-1YTS-TR | Microchip Technology Inc | MOSFET Driver Dual Full Bridge 1 A 55 V to 16 V 35 ns 16 Pins TSSOP (Alt: MIC4606-1YTS-TR) RoHS : Compliant | 0 | |||
| C14606_HB-2X2-WW | LEDIL | Square Lens Array For XML2 LED (Alt: C14606_HB-2X2-WW) RoHS : Compliant | 0 | |||
| LPC54606J256BD100K | NXP Semiconductors | (Alt: LPC54606J256BD100K) RoHS : Compliant | 0 | |||
| LPC54606J512BD208K | NXP Semiconductors | (Alt: LPC54606J512BD208K) RoHS : Compliant | 0 | |||
| S4606901P0090 (ALS) | Sanmina Corporation | (Alt: S4606901P0090) RoHS : Not Compliant | 0 | |||
| LPC54606J512BD100E,551 | NXP Semiconductors | ARM MCU LPC Family LPC54000 Series Microcontrollers ARM CortexM4 32 bit 180 MHz 512 KB (Alt: LPC54606J512BD100E) RoHS : Compliant | 0 | |||
| LPC54606J256ET180E,551 | NXP Semiconductors | ARM MCU 32bit ARM CortexM4F 180 MHz 256 KB 136 KB 180 Pins TFBGA (Alt: LPC54606J256ET180E) RoHS : Compliant | 0 | |||
| LPC54606J256ET100E,551 | NXP Semiconductors | ARM MCU 32bit ARM CortexM4F 180 MHz 256 KB 136 KB 100 Pins TFBGA (Alt: LPC54606J256ET100E) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | 4606X-101-330 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,000 | |
| 4606X-101-221LF | Bourns Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 520 | ||
| 4606X-Z11-102 | Bourns Inc | IN STOCK SHIP TODAY | 500 | |||
| 4606X-1-472 | Bourns Inc | IN STOCK SHIP TODAY |
| 319 | ||
| 4606X-1-224LF | Bourns Inc | IN STOCK SHIP TODAY |
| 274 | ||
| 145046060545829 | Kyocera AVX Components | IN STOCK SHIP TODAY | 210 | |||
| 4606X-102-821 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 192 | ||
| 4606X-102-103 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 187 | ||
| 4606X-1-102 | Bourns Inc | IN STOCK SHIP TODAY |
| 157 | ||
| 4606X-1-224 | Bourns Inc | IN STOCK SHIP TODAY |
| 51 | ||
| 4606X-101-560 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 50 | ||
| 15-24-6060 | Molex | IN STOCK SHIP TODAY RoHS : Compliant |
| 46 | ||
| 4606X-101-122 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 24 | ||
| 4606X-101-223LF | Bourns Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 8 | ||
| 4606X-101-105 | Bourns Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 6 | ||
 DB Roberts | 4606 | Heyco | BRASS REDUCER PG9-M12 | 0 | ||
| 17W04606B | Essentra Components | FLAT WASHER, .157 ID, .505 OD, | 0 | |||
| 13RS046060B | Essentra Components | ROUND SPACER, .252 ID, .460 OD | 0 | |||
| 460665 | Essentra Components | 0 | ||||
| 13RS046060 | Essentra Components | ROUND SPACER, .252 ID, .460 OD | 0 | |||
| 13RS046062 | Essentra Components | ROUND SPACER, .140 ID, .454 OD | 0 | |||
| 4606-632-SS | RAF Electronic Hardware | 0 | ||||
| 64-60-602-10 | Southco | The basic look and function of this entire line is elegant in its simplicity. The flat paddle in a flush-mount cup provides simplicity of design the enclosed slide mechanism provides simplicity of operation. Lift paddle to retract slide and open door. Pus | 0 | |||
| 460687 | Essentra Components | 0 | ||||
| 13RS046062B | Essentra Components | ROUND SPACER, .140 ID, .454 OD | 0 | |||
| 1046-062-SS | RAF Electronic Hardware | 0 | ||||
| RDR460660A | Essentra Components | 15MM ROUND TUBE GLIDE TEXTURED | 0 | |||
| SK4-6060-6 | PennEngineering (PEM) | STANDOFF, KEYHOLE STAINLESS | 0 | |||
| E3-146-067 | Southco | The smooth operation of theVISE ACTION� design aligns the pawl behind the frame and draws it up tight with a single continuous half-turn motion. Its compression action provides consistent 6.4 mm (.25) pull-up for environmental sealing in gasketed applic | 0 | |||
| 17W04606 | Essentra Components | FLAT WASHER, .157 ID, .505 OD, | 0 | |||
 EBV Elektronik | ACPL-W346-060E | Broadcom Limited | OptoCoupler 1CH 6Pin SOIC Tube (Alt: ACPL-W346-060E) RoHS : Compliant | 0 | ||
| ACPL-P346-060E | Broadcom Limited | (Alt: ACPL-P346-060E) RoHS : Compliant | 0 | |||
| MIC4606-2YML-TR | Microchip Technology Inc | MOSFET Driver Dual Full Bridge 1 A 55 V to 16 V 35 ns 16 Pins QFNEP (Alt: MIC4606-2YML-TR) RoHS : Compliant | 0 | |||
| MIC4606-1YML-TR | Microchip Technology Inc | MOSFET DRVR 1A 2OUT HiLo Side NonInv 16Pin QFN TR (Alt: MIC4606-1YML-TR) RoHS : Compliant | 0 | |||
| MIC4606-2YTS-TR | Microchip Technology Inc | (Alt: MIC4606-2YTS-TR) RoHS : Compliant | 0 | |||
| MIC4606-2YML-T5 | Microchip Technology Inc | MOSFET DRVR 1A 4OUT HiLo Side NonInv 16Pin QFN EP TR (Alt: MIC4606-2YML-T5) RoHS : Compliant | 0 | |||
| MIC4606-1YTS-T5 | Microchip Technology Inc | MOSFET DRVR 1A 4OUT HiLo Side NonInv 16Pin TSSOP TR (Alt: MIC4606-1YTS-T5) RoHS : Compliant | 0 | |||
| MIC4606-1YML-T5 | Microchip Technology Inc | 85V FULL BRIDGE FET DRIVER (Alt: MIC4606-1YML-T5) RoHS : Compliant | 0 | |||
| SIR4606DP-T1-GE3 | Vishay Intertechnologies | (Alt: SIR4606DP-T1-GE3) RoHS : Compliant | 0 | |||
| LPC54606J256BD100K | NXP Semiconductors | (Alt: LPC54606J256BD100K) RoHS : Compliant | 0 | |||
| LPC54606J512BD208K | NXP Semiconductors | (Alt: LPC54606J512BD208K) RoHS : Compliant | 0 | |||
| LPC54606J512BD100E,551 | NXP Semiconductors | ARM MCU LPC Family LPC54000 Series Microcontrollers ARM CortexM4 32 bit 180 MHz 512 KB (Alt: LPC54606J512BD100E) RoHS : Compliant | 0 | |||
| LPC54606J256ET180E,551 | NXP Semiconductors | ARM MCU 32bit ARM CortexM4F 180 MHz 256 KB 136 KB 180 Pins TFBGA (Alt: LPC54606J256ET180E) RoHS : Compliant | 0 | |||
| LPC54606J512ET100E,551 | NXP Semiconductors | MCU 32Bit LPC546xx ARM Cortex M4 RISC 512KB Flash 17V to 36V 100Pin TFBGA Tray (Alt: LPC54606J512ET100E) RoHS : Compliant | 0 | |||
| LPC54606J256ET100E,551 | NXP Semiconductors | ARM MCU 32bit ARM CortexM4F 180 MHz 256 KB 136 KB 100 Pins TFBGA (Alt: LPC54606J256ET100E) RoHS : Compliant | 0 | |||
 FDH Electronics | 100-210-4606-TR-SVCFEE | BJG Electronics | BJG Microwave C | 3,415 | ||
| 100-210-4606-T | BJG Electronics | BJG Microwave C | 2,020 | |||
| 100-210-4606 | FDH Electronics | BJG Microwave C | 1,885 | |||
| U-4046-062-UP | Connector Technology Inc | Backshells & Ac |
| 201 | ||
| LM-15746-061719 | ELECTRO ENTERPRISES INC | Wire and Cable | 3 | |||
 Flip Electronics | LPC54606J512BD208E | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 5,716 | |
| LPC54606J256ET100 | NXP Semiconductors | Stock RoHS : Compliant | 256 | |||
LPC54606J256ET100E | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 255 | ||
| LPC54606J256ET180E | NXP Semiconductors | Stock RoHS : Compliant | 189 | |||
| LPC54606J512BD208 | NXP Semiconductors | Stock RoHS : Compliant | 111 | |||
| LPC54606J256BD100 | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 79 | ||
| LPC54606J512BD208K | NXP Semiconductors | Stock, Ship Today RoHS : Compliant |
| 72 | ||
 Maritex | 794606-1 | TE Connectivity | Rectangular Connector Contacts; 794606-1; TE CONNECTIVITY; Tin; Crimp; Cable; Female RoHS : Compliant |
| 243,399 | |
| 1-794606-1 | TE Connectivity | Rectangular Connector Contacts; 1-794606-1; TE CONNECTIVITY; Gold, Tin; Crimp; 20 AWG; 24 AWG RoHS : Compliant |
| 146,752 | ||
| JS-1146-06 | Chyao Shiunn Electronic Industrial Ltd | Crimp terminal housing; pitch 1.25mm; 6-contacts; female; applicable wire AWG#28-32; 125V/1A |
| 2,102 | ||
| SW-SS12F4606-JL | Jialong | Miniature slide switch; 1-pole; twostable; ON-ON |
| 461 | ||
| LPC54606J512BD208K | NXP Semiconductors | Microcontrollers (MCU); LPC54606J512BD208K; NXP SEMICONDUCTORS RoHS : Compliant |
| 145 | ||
| LPC54606J512ET100E | NXP Semiconductors | Microcontrollers (MCU); LPC54606J512ET100E; NXP SEMICONDUCTORS; 200 kB RoHS : Compliant |
| 139 | ||
| C14606_HB-2X2-WW | LEDIL | Lens for LED high power; angle: 48 to 73 degrees FWHM; Number of LEDs: 4; Dimensions: 50x50mm; Height: 8.5mm; meterial: PMMA; Fastening: pin; screw |
| 120 | ||
| 4304.6064 | Schurter Electronic Components | IEC C14 power entry module with 1-pole fuseholder and 2-pole rocker switch; male; panel mount, snap-in; 4.8x0.8mm blade terminals; IP40; 10A/250VAC RoHS : Compliant |
| 100 | ||
 Pasternack Enterprises US | PE4606 | Pasternack Enterprises | Key Specifications, Polarity: Standard, Connector Series: BNC, Connector Gender: Male, Impedance: 75 Ohm, Body Style: Right Angle, Attachment Method: Clamp/Solder, Mount Method: None, Interface Type 1: RG11, Interface Type 2: RG216, Interface Type 3: RG144. 75 Ohm BNC Male Right Angle Connector Clamp/Solder Attachment for RG11, RG216, RG144. PE4606 BNC male right angle coaxial connector has an interface type of RG11, RG216, RG144 and a 75 Ohm impedance. Pasternack BNC male connector uses shield/contact clamp/solder as an attachment method. The Pasternack right angle BNC male coaxial connector has a PTFE dielectric type. The Pasternack BNC coaxial connector has a brass body with nickel plating. Our PE4606 BNCright angle connector uses brass contact. This BNC male right angle coaxial RF connector is RoHS and REACH compliant. This Pasternack right angle male BNC connector will ship the same day as purchased. Our BNC right angle male connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom BNC connector cable assemblies that will ship the same day as well. |
| 2,619 | |
| PE3W14606-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-034SR, RF Cable Type: PE-034SR, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SSMA Male to SSMA Female Cable 6 Inch Length Using PE-034SR Coax., Radio frequency assembly SSMA male to SSMA female cable 6 inch length using PE-034SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMA male to SSMA female cable 6 inch length using PE-034SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to SSMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SSMA cable connection on one end and a SSMA cable connection on the other. Our SSMA to SSMA cable assembly has a male gender on end 1 and a female on end 2. PE3W14606-6 can also be known as a SSMA plug to SSMA jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has an in-series connection. SSMA plug to SSMA jack cable assembly PE3W14606-6 is built with PE-034SR which is a semi-rigid coax type. The Pasternack semi-rigid SSMA cable assembly is manufactured with SSMA to SSMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W14606-6 can also be used in the other direction and will be a SSMA female to SSMA male cable assembly if the opposite connectivity is required. SSMA plug to SSMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMA cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to SSMA RF cable assembly as per your requirements. |
| 79 | ||
| PE3W14606-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-034SR, RF Cable Type: PE-034SR, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SSMA Male to SSMA Female Cable 12 Inch Length Using PE-034SR Coax., Radio frequency assembly SSMA male to SSMA female cable 12 inch length using PE-034SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMA male to SSMA female cable 12 inch length using PE-034SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to SSMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SSMA cable connection on one end and a SSMA cable connection on the other. Our SSMA to SSMA cable assembly has a male gender on end 1 and a female on end 2. PE3W14606-12 can also be known as a SSMA plug to SSMA jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has an in-series connection. SSMA plug to SSMA jack cable assembly PE3W14606-12 is built with PE-034SR which is a semi-rigid coax type. The Pasternack semi-rigid SSMA cable assembly is manufactured with SSMA to SSMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W14606-12 can also be used in the other direction and will be a SSMA female to SSMA male cable assembly if the opposite connectivity is required. SSMA plug to SSMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMA cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to SSMA RF cable assembly as per your requirements. |
| 66 | ||
| PE3W14606-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-034SR, RF Cable Type: PE-034SR, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SSMA Male to SSMA Female Cable 18 Inch Length Using PE-034SR Coax., Radio frequency assembly SSMA male to SSMA female cable 18 inch length using PE-034SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMA male to SSMA female cable 18 inch length using PE-034SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to SSMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SSMA cable connection on one end and a SSMA cable connection on the other. Our SSMA to SSMA cable assembly has a male gender on end 1 and a female on end 2. PE3W14606-18 can also be known as a SSMA plug to SSMA jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has an in-series connection. SSMA plug to SSMA jack cable assembly PE3W14606-18 is built with PE-034SR which is a semi-rigid coax type. The Pasternack semi-rigid SSMA cable assembly is manufactured with SSMA to SSMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W14606-18 can also be used in the other direction and will be a SSMA female to SSMA male cable assembly if the opposite connectivity is required. SSMA plug to SSMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMA cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to SSMA RF cable assembly as per your requirements. |
| 44 | ||
| PE3C4460-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 6 inches. SSMC Plug Right Angle to SSMC Jack Right Angle Bulkhead Cable 6 Inch Length Using RG178 Coax., Radio frequency assembly SSMC plug right angle to SSMC jack right angle bulkhead cable 6 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMC plug right angle to SSMC jack right angle bulkhead cable 6 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SSMC cable connection on one end and right angle SSMC bulkhead cable connection on the other. Our right angle SSMC to right angle SSMC cable assemblies have a plug gender on end 1 and jack on end 2. This SSMC to SSMC cable is a plug to jack coax assembly, PE3C4460-6, can also be known as a right angle SSMC male to right angle SSMC female cable assembly and will be shipped same-day as it is purchased. SSMC male to SSMC female cable assembly PE3C4460-6 is built with RG178 which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with right angle SSMC to right angle SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SSMC right angle plug to SSMC right angle jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4460-6 can also be used in the other direction and will be right angle SSMC jack bulkhead to right angle SSMC plug cable assembly if the opposite connectivity is required. SSMC right angle male to SSMC right angle female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to SSMC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug right angle to SSMC jack right angle bulkhead cable 6 inch length using RG178 coax. |
| 42 | ||
| PE3C4460-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SSMC, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 60 inches. SSMC Plug Right Angle to SSMC Jack Right Angle Bulkhead Cable 60 Inch Length Using RG178 Coax., Radio frequency assembly SSMC plug right angle to SSMC jack right angle bulkhead cable 60 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMC plug right angle to SSMC jack right angle bulkhead cable 60 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMC to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SSMC cable connection on one end and right angle SSMC bulkhead cable connection on the other. Our right angle SSMC to right angle SSMC cable assemblies have a plug gender on end 1 and jack on end 2. This SSMC to SSMC cable is a plug to jack coax assembly, PE3C4460-60, can also be known as a right angle SSMC male to right angle SSMC female cable assembly and will be shipped same-day as it is purchased. SSMC male to SSMC female cable assembly PE3C4460-60 is built with RG178 which is a flexible coax type. The Pasternack flexible SSMC cable assembly is manufactured with right angle SSMC to right angle SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SSMC right angle plug to SSMC right angle jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C4460-60 can also be used in the other direction and will be right angle SSMC jack bulkhead to right angle SSMC plug cable assembly if the opposite connectivity is required. SSMC right angle male to SSMC right angle female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMC to SSMC cable assembly for quick shipment worldwide. Variations of SSMC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMC plug right angle to SSMC jack right angle bulkhead cable 60 inch length using RG178 coax. |
| 42 | ||
| PE3W14606-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SSMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-034SR, RF Cable Type: PE-034SR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SSMA Male to SSMA Female Cable 24 Inch Length Using PE-034SR Coax., Radio frequency assembly SSMA male to SSMA female cable 24 inch length using PE-034SR coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SSMA male to SSMA female cable 24 inch length using PE-034SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SSMA to SSMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SSMA cable connection on one end and a SSMA cable connection on the other. Our SSMA to SSMA cable assembly has a male gender on end 1 and a female on end 2. PE3W14606-24 can also be known as a SSMA plug to SSMA jack cable assembly and will be shipped the same day as it is purchased. This semi-rigid RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The semi-rigid RF cable has an in-series connection. SSMA plug to SSMA jack cable assembly PE3W14606-24 is built with PE-034SR which is a semi-rigid coax type. The Pasternack semi-rigid SSMA cable assembly is manufactured with SSMA to SSMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W14606-24 can also be used in the other direction and will be a SSMA female to SSMA male cable assembly if the opposite connectivity is required. SSMA plug to SSMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SSMA to SSMA cable assembly for quick shipment worldwide. Variations of SSMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SSMA to SSMA RF cable assembly as per your requirements. |
| 33 | ||
| PE7460-6 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Connector-Out Impedance: 50 Ohms, Max Freq: 12.4 GHz, Nominal Attenuation: 6 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.25:1, Input Power, Max (CW): 5 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 6 dB Fixed Attenuator, SMA Male to SMA Female Black Anodized Aluminum Body Rated to 5 Watts Up to 12.4 GHz. PE7460-6 is a fixed 6 dB attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers, and detectors. Pasternack's PE7460-6 in-series fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.25:1 and operates between -55 and +125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with black anodized aluminum body material. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. The Pasternack PE7460-6 6 dB attenuator is rated for up to 12.4 GHz. Our microwave attenuator is rated to 5 Watts at the stated attenuation value. This coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization, production systems, wifi 6E, 5G cellular bands applications. Our fixed RF attenuator PE7460-6 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 6 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you to the ideal RF coaxial fixed attenuator as per your requirement. |
| 8 | ||
| PE34606LF | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. MCX Jack Bulkhead to MCX Jack Bulkhead Cable Using RG178 Coax, LF Solder. PE34606LF is a MCX jack bulkhead to MCX jack bulkhead cable using RG178 coax. This Pasternack MCX jack bulkhead to MCX jack bulkhead cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm MCX for connector 2. Our jack MCX bulkhead to jack MCX bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34606LF MCX jack bulkhead to MCX jack bulkhead cable assembly is constructed with RG178 coax. | 0 | |||
| PE34460-6 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-B100, RF Cable Type: PE-B100, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to SMC Plug Cable 6 Inch Length Using PE-B100 Coax., Radio frequency assembly SMA male to SMC plug cable 6 inch length using PE-B100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMC plug cable 6 inch length using PE-B100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMC cable connection on the other. Our SMA to SMC cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SMC cable is a male to plug coax assembly, PE34460-6, can also be known as a SMA plug to SMC male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMC male cable assembly PE34460-6 is built with PE-B100 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to SMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34460-6 can also be used in the other direction and will be SMC plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMC plug cable 6 inch length using PE-B100 coax. |
| 0 | ||
| PE34460-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-B100, RF Cable Type: PE-B100, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male to SMC Plug Cable 60 Inch Length Using PE-B100 Coax., Radio frequency assembly SMA male to SMC plug cable 60 inch length using PE-B100 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMC plug cable 60 inch length using PE-B100 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMC cable connection on the other. Our SMA to SMC cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SMC cable is a male to plug coax assembly, PE34460-60, can also be known as a SMA plug to SMC male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMC male cable assembly PE34460-60 is built with PE-B100 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to SMC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34460-60 can also be used in the other direction and will be SMC plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMC male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMC plug cable 60 inch length using PE-B100 coax. |
| 0 | ||
| PE3460-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 60 inches. BNC Male to BNC Male Right Angle Cable 60 Inch Length Using RG174 Coax., Radio frequency assembly BNC male to BNC male right angle cable 60 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to BNC male right angle cable 60 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and right angle BNC cable connection on the other. Our BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3460-60, can also be known as a BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3460-60 is built with RG174 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this BNC male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3460-60 can also be used in the other direction and will be right angle BNC male to BNC male cable assembly if the opposite connectivity is required. BNC plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male right angle cable 60 inch length using RG174 coax. |
| 0 | ||
| PE3C4606 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm. N Male to N Female Bulkhead Cable Using LMR-200-UF Coax. PE3C4606 is a type N male to type N female bulkhead cable using LMR-200-UF coax. This Pasternack type N male to type N female bulkhead cable assembly uses a 50 Ohm N type for connector 1 and a 50 Ohm N type for connector 2. Our male type N to female type N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C4606 type N male to type N female bulkhead cable assembly is constructed with LMR-200-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W04606/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. BNC Female Bulkhead to Reverse Polarity SMA Male Right Angle Cable Using RG316 Coax with HeatShrink. PE3W04606/HS is a BNC female bulkhead to reverse polarity SMA male right angle cable using RG316 coax. This Pasternack BNC female bulkhead to reverse polarity SMA male right angle cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm SMA for connector 2. BNC to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female BNC bulkhead to reverse polarity male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04606/HS BNC female bulkhead to SMA reverse polarity male right angle cable assembly is constructed with RG316 coax. | 0 | |||
| PE34606/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MCX, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. MCX Jack Bulkhead to MCX Jack Bulkhead Cable Using RG178 Coax with HeatShrink. PE34606/HS is a MCX jack bulkhead to MCX jack bulkhead cable using RG178 coax. This Pasternack MCX jack bulkhead to MCX jack bulkhead cable assembly uses a 50 Ohm MCX for connector 1 and a 50 Ohm MCX for connector 2. Our jack MCX bulkhead to jack MCX bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34606/HS MCX jack bulkhead to MCX jack bulkhead cable assembly is constructed with RG178 coax. | 0 | |||
 TE Connectivity | 1-794606-2 | TE Connectivity | MICRO MNL RPT CNT STRP 30AU LF Contact Mating Area Plating Material: Gold (Au) Contact Type: Receptacle Wire Contact Termination Area Plating Material: Tin Wire Size: 24 – 20 AWG Operating Voltage: 250 VAC Gold (Au) Receptacle Tin 24 – 20 AWG | Connector Contact | Part Number: 1-794606-2 | Internal Number: 1-794606-2 | TE Connectivity RoHS : Compliant |
| 212,155 | |
| 794606-2 | TE Connectivity | MICRO MNL RPT CNT STRIP 15AU Contact Mating Area Plating Material: Gold (Au) Contact Type: Receptacle Wire Contact Termination Area Plating Material: Tin Wire Size: 24 – 20 AWG Operating Voltage: 250 VAC Gold (Au) Receptacle Tin 24 – 20 AWG | Connector Contact | Part Number: 794606-2 | Internal Number: 794606-2 | TE Connectivity RoHS : Compliant |
| 90,061 | ||
| 794606-1 | TE Connectivity | MICRO MNL RPT CNT STRIP 20-24 Contact Mating Area Plating Material: Tin (Sn) Contact Type: Receptacle Wire Contact Termination Area Plating Material: Tin Wire Size: 24 – 20 AWG Operating Voltage: 250 VAC Tin (Sn) Receptacle 24 – 20 AWG | Connector Contact | Part Number: 794606-1 | Internal Number: 794606-1 | Alias Number: F30642-000 | TE Connectivity RoHS : Compliant |
| 46,418 | ||
| 6-66460-6 | TE Connectivity | PIN,.062 DIA,.025 SQ POST,LP Contact Mating Area Plating Material: Tin (Sn) Contact Type: Pin Wire Contact Termination Area Plating Material: Tin Wire Size: 32 AWG Wire Size: .03 mm² Tin (Sn) Pin 32 AWG | Connector Contact | Part Number: 6-66460-6 | Internal Number: 6-66460-6 | TE Connectivity RoHS : Compliant |
| 9,700 | ||
| 8-215460-6 | TE Connectivity | 16P, MM 1.27, FOB, SE, TH, KK, BOX Connector System: Cable-to-Board Number of Positions: 16 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: With Cable-to-Board 16 2.54 mm .1" | Ribbon Cable Connector | Part Number: 8-215460-6 | Internal Number: 8-215460-6 | TE Connectivity RoHS : Compliant |
| 3,030 | ||
| 7-215460-6 | TE Connectivity | 6P, MM 1.27, FOB, SE, TH, KK, BOX Connector System: Cable-to-Board Number of Positions: 6 Centerline (Pitch): 2.54 mm Centerline (Pitch): .1 in PCB Mount Retention: With Cable-to-Board 6 2.54 mm .1" | Ribbon Cable Connector | Part Number: 7-215460-6 | Internal Number: 7-215460-6 | TE Connectivity RoHS : Compliant |
| 1,553 | ||
 Vyrian | 4606X-AP2-203LF | Bourns Inc | Array/Network Resistor, Isolated, Metal Glaze/thick Film, 0.75W, 20000ohm, 100V, 2% +/-Tol, 100ppm/Cel, Through Hole Mount, 6010 RoHS : Compliant | 14,929 | ||
| MAX4606CSE+T | Analog Devices Inc | SPST, 4 Func, 1 Channel, CMOS, PDSO16 RoHS : Compliant | 10,954 | |||
V62/04606-01XA | Texas Instruments | Digital Signal Processor, 32-Bit Size, 32-Ext Bit, 50MHz, CMOS, PBGA352 RoHS : Not Compliant | 7,953 | |||
| LPC54606J256ET100E | NXP Semiconductors | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M4 CPU, 180MHz RoHS : Compliant | 7,909 | |||
V62/14606-01XE-T | Texas Instruments | Bus Driver, CB3Q/3VH/3C/2B Series, 2-Func, 1-Bit, True Output, CMOS, PDSO8 RoHS : Compliant | 7,906 | |||
| MAX4606ESE+ | Analog Devices Inc | SPST, 4 Func, 1 Channel, CMOS, PDSO16 RoHS : Compliant | 7,369 | |||
| MAX4606CSE+ | Analog Devices Inc | SPST, 4 Func, 1 Channel, CMOS, PDSO16 RoHS : Compliant | 6,955 | |||
| LTM4606IV#PBF | Analog Devices Inc | Switching Regulator, Current-mode, 8A, 900kHz Switching Freq-Max, PBGA133 RoHS : Compliant | 6,881 | |||
TMS44460-60DGA | Texas Instruments | Fast Page DRAM, 1MX4, 60ns, CMOS, PDSO24 RoHS : Not Compliant | 6,182 | |||
| 4N46-060E | Broadcom Limited | RoHS : Compliant | 5,692 | |||
| CT460600 | Micron Technology, Inc | 4,994 | ||||
| LTM4606IY#PBF | Analog Devices Inc | Switching Regulator, Current-mode, 800kHz Switching Freq-Max, PBGA133 RoHS : Compliant | 4,976 | |||
| P046-06N-T | Tripp Lite | Cable Assembly | 603 | |||
| 953460-6602-AR | 3m Electronic Products Division | Board Connector, 60 Contact(s), 2 Row(s), Female, Straight, Solder Terminal, Socket | 561 | |||
| 586-4606-103F | Dialight | Single Color LED Display Cluster, White, 24.89mm RoHS : Compliant | 447 | |||
 Waytek, Inc. | 4606-2222B | Egis Mobile Electric | Harness for 8+2 Fuse Block 14 AWG, 10 ft ea Marked Circuits #5-8 |
| 18 | |
 Win Source Electronics | 52746-0671 | Molex | 0.50mm (.020") Pitch FFC/FPC Connector, Right Angle, SMT, ZIF, Bottom ContactStyle, 6 Circuits, Lead-free, Gold Contact Plating, High BarrierPackaging RoHS : Compliant |
| 216,056 | |
CLA4606-085LF | Skyworks Solutions Inc | DIODE RF PIN 75V 1.5A 3QFN / Diode PIN Attenuator 75V 1500mA 3-Pin QFN EP RoHS : Compliant |
| 40,000 | ||
| AO4606 | Alpha & Omega Semiconductor | MOSFET N-CH 8SOIC RoHS : Compliant |
| 19,225 | ||
| DTM4606 | Dintek | N- and P-Channel 30 V (D-S) MOSFET |
| 7,973 | ||
| LPC54606J512ET100 | Nexperia | 32-bit ARM Cortex-M4 microcontroller with up to 512 KB flash, 200 KB SRAM, and 180 MHz operating frequency |
| 5,691 | ||
| LPC54606J512ET100E | Nexperia | IC MCU 32BIT 512KB FLSH 100TFBGA |
| 5,200 | ||
LTM4606EV#PBF | Linear Technology | IC DC/DC UMODULE 6A 133-LGA RoHS : Compliant |
| 1,210 | ||
| 74437346068 | Wurth Elektronik | FIXED IND 6.8UH 3.4A 60 MOHM SMD / 6.8 µH Shielded Molded Inductor 3.4 A 60mOhm Max Nonstandard RoHS : Compliant |
| 140 | ||
| LPC54606J512BD100E | Nexperia | IC MCU 32BIT 512KB FLASH 100LQFP |
| 52 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Mexican ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
British
New Zealand