480DCNRWNFZCWC Price, Reseller, Stock

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C400, RF Cable Type: PE-C400, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to TNC Male Cable 36 Inch Length Using PE-C400 Coax., Radio frequency assembly N male to TNC male cable 36 inch length using PE-C400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to TNC male cable 36 inch length using PE-C400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a male gender on end 1 and male on end 2. This type N to TNC cable is a male to male coax assembly, PE34801-36, can also be known as a low loss N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE34801-36 is built with PE-C400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34801-36 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male cable 36 inch length using PE-C400 coax.

1 : $124.99
25 : $118.74
50 : $112.49
100 : $107.49

639

PE3C4801-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. SSMB Plug Right Angle to SSMB Plug Right Angle Cable 50 CM Length Using RG178 Coax., Radio frequency assembly SSMB plug right angle to SSMB plug right angle cable 50 cm length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMB plug right angle to SSMB plug right angle cable 50 cm length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMB to SSMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SSMB cable connection on one end and right angle SSMB cable connection on the other. Our right angle SSMB to right angle SSMB cable assemblies have a plug gender on end 1 and plug on end 2. This SSMB to SSMB cable is a plug to plug coax assembly, PE3C4801-50CM, can also be known as a right angle SSMB male to right angle SSMB male cable assembly and will be shipped same-day as it is purchased. SSMB male to SSMB male cable assembly PE3C4801-50CM is built with RG178 which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with right angle SSMB to right angle SSMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SSMB right angle plug to SSMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SSMB right angle male to SSMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMB to SSMB cable assembly for quick shipment worldwide. Variations of SSMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMB plug right angle to SSMB plug right angle cable 50 cm length using RG178 coax.

1 : $81.39
25 : $77.32
50 : $73.25
100 : $70.0

PE3C4801-24

Pasternack Enterprises

Key Specifications, Connector Series 1: SSMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 24 inches. SSMB Plug Right Angle to SSMB Plug Right Angle Cable 24 Inch Length Using RG178 Coax., Radio frequency assembly SSMB plug right angle to SSMB plug right angle cable 24 inch length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SSMB plug right angle to SSMB plug right angle cable 24 inch length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SSMB to SSMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SSMB cable connection on one end and right angle SSMB cable connection on the other. Our right angle SSMB to right angle SSMB cable assemblies have a plug gender on end 1 and plug on end 2. This SSMB to SSMB cable is a plug to plug coax assembly, PE3C4801-24, can also be known as a right angle SSMB male to right angle SSMB male cable assembly and will be shipped same-day as it is purchased. SSMB male to SSMB male cable assembly PE3C4801-24 is built with RG178 which is a flexible coax type. The Pasternack flexible SSMB cable assembly is manufactured with right angle SSMB to right angle SSMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SSMB right angle plug to SSMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SSMB right angle male to SSMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SSMB to SSMB cable assembly for quick shipment worldwide. Variations of SSMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SSMB plug right angle to SSMB plug right angle cable 24 inch length using RG178 coax.

1 : $82.39
25 : $78.27
50 : $74.15
100 : $70.86

PE3W04805LF/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. N Male Right Angle to TNC Male Right Angle Low Loss Cable Using LMR-400-UF Coax with HeatShrink, LF Solder., Radio frequency assembly N male right angle to TNC male right angle low loss cable using LMR-400-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to TNC male right angle low loss cable using LMR-400-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a right angle TNC cable connection on the other. Our low loss right angle type N to right angle TNC cable assembly has a male gender on end 1 and a male on end 2. PE3W04805LF/HS can also be known as a low loss right angle type N plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W04805LF/HS RF cable has a TPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our right angle type N male to right angle TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3W04805LF/HS is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W04805LF/HS can also be used in the other direction and will be a right angle TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

PE3W04802-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMP Female Right Angle to SMP Female Right Angle Cable 48 Inch Length Using PE-047SR Coax., Radio frequency assembly SMP female right angle to SMP female right angle cable 48 inch length using PE-047SR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female right angle to SMP female right angle cable 48 inch length using PE-047SR coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE3W04802-48, can also be known as a right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3W04802-48 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to SMP female right angle cable 48 inch length using PE-047SR coax.

1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47

PE48010

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SMB, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 1.2 GHz, Interface Type 1: LMR-100, Interface Type 2: PE-B100, Interface Type 3: PE-C100, Interface Type 4: 0.100 Inch. SMB Jack Bulkhead Mount Connector Crimp Attachment for LMR-100, PE-B100, PE-C100, 0.100 Inch cable. PE48010 SMB jack bulkhead coaxial connector has an interface type of SMB jack, which is compatible with LMR®-100, PE-B100, PE-C100 and 0.100 inch cables, and has an impedance of 50 Ohms. Pasternack’s SMB jack bulkhead connector uses crimp as an attachment method. Our jack SMB coaxial connector provides a maximum frequency of 1.2 GHz. This SMB jack RF connector is stocked to be readily available for same business day shipment and can also be designed onto custom cable configurations using our online cable creator. The Pasternack SMB jack bulkhead coaxial connector has a PTFE dielectric type and a VSWR of 1.2:1. Pasternack’s SMB coaxial connector has a brass body with gold over nickel over copper plating. Our PE48010 SMB connector uses a gold over nickel over copper-plated brass contact. The Pasternack RF connector has a maximum inner and outer conductor resistance of 5 mOhms and 2.5 mOhms respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. The PE48010 SMB bulkhead connector operates at a temperature range of -65 to 165 deg C. This SMB connector has a gold over nickel over copper inner contact plating. The Pasternack SMB jack connector has a maximum operating voltage of 335 Vrms and a dielectric withstanding voltage of 1,000 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 10,000 MOhms. Our SMB jack connector has a length of 0.256 inches, a width of 0.256 inches, and a weight of 0.004 lbs. This Pasternack jack SMB bulkhead connector will ship the same business day as purchased. Our bulkhead SMB jack coaxial connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $24.79
25 : $23.55
50 : $22.31
100 : $21.32

PE48013

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SMB, Connector Gender: Jack, Impedance: 50 Ohm, Body Style: Right Angle, Attachment Method: Crimp, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 4 GHz, Interface Type 1: LMR-100, Interface Type 2: PE-B100, Interface Type 3: PE-C100, Interface Type 4: 0.100 Inch. SMB Jack Right Angle Connector Crimp Attachment for LMR-100, PE-B100, PE-C100, 0.100 Inch Cable. PE48013 SMB jack right angle coaxial connector has an interface type of SMB jack, which is compatible with LMR®-100, PE-B100, PE-C100 and 0.100 inch cables, and has an impedance of 50 Ohms. Pasternack’s SMB jack connector uses crimp as an attachment method. Our jack SMB right angle coaxial connector provides a maximum frequency of 4 GHz. This SMB jack RF connector is stocked to be readily available for same business day shipment and can also be designed onto custom cable configurations using our online cable creator. The Pasternack right angle SMB jack coaxial connector has a PTFE dielectric type and a VSWR of 1.2:1. Pasternack’s SMB coaxial connector has a brass body with gold over nickel over copper plating. Our PE48013 SMB right angle connector uses a gold over nickel over copper-plated brass contact. The Pasternack RF connector has a maximum inner and outer conductor resistance of 5 mOhms and 2.5 mOhms respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from brass material has a contact life of 500 cycles or more. The PE48013 SMB connector operates at a temperature range of -65 to 165 deg C. This right angle SMB connector has a gold over nickel over copper inner contact plating. The Pasternack SMB jack connector has a maximum operating voltage of 335 Vrms and a dielectric withstanding voltage of 1,000 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 10,000 MOhms. Our right angle SMB jack connector has a length of 0.506 inches, a width of 0.506 inches, and a weight of 0.006 lbs. This Pasternack right angle jack SMB connector will ship the same business day as purchased. Our SMB right angle jack coaxial connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $30.59
25 : $29.06
50 : $27.53
100 : $26.31

PE3MSA00480-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: TRB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: TRB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02003, RF Cable Type: 30-02003, RF Cable Impedance: 78 Ohm, Length, Max: 48 inches. Lead Free 3-Lug TRB Jack to Jack for 78 Ohm PE-30-02003, 48" Cable., Radio frequency assembly lead free 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Lead free 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB to TRB cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB cable connection on one end and TRB cable connection on the other. Our 1553 TRB to TRB cable assemblies have a jack gender on end 1 and jack on end 2. PE3MSA00480-48 can also be known as a 1553 TRB female to TRB female cable assembly and will be shipped same-day as it is purchased. TRB female to TRB female cable assembly PE3MSA00480-48 is built with 30-02003 which is a flexible twinax type. The Pasternack flexible TRB cable assembly is manufactured with TRB to TRB cable connectors, has a 78 Ohm impedance. RF specs on this 500 MHz maximum frequency TRB jack to TRB jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 1553 TRB female to TRB female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB to TRB cable assembly for quick shipment worldwide. Variations of TRB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this lead free 3-Lug TRB jack to jack for 78 Ohm PE-30-02003, 48" cable.

1 : $201.99
25 : $191.89
50 : $181.79
100 : $173.71

PE7480-20

Pasternack Enterprises

Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 20 dB, Attenuation Accuracy, Typ: 2 dB, Input Power, Max (CW): 50 Watts, Body Material: Black Anodized Aluminum Heatsink, Connector-In Series: N, Connector-In Gender: Female, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 75 deg C, Min Operating Temperature: -40 deg C. Low PIM 20dB Fixed Attenuator N-type female to N-type female Black Anodized Aluminum Body to 50 Watts 0.6 GHz to 6 GHz. The PE7480-20 is a low PIM fixed 20 dB attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This low PIM threaded RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Pasternack's PE7480-20 fixed attenuator is available with a typical attenuation accuracy of 2 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. Our low PIM radio frequency attenuator with N-type connectors is constructed with black anodized aluminum heatsink body material. This passive connectorized radio frequency attenuator has -160 dBc typical passive intermodulation. The connectorized directional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This N-type attenuator has a female gender on side 1 and a N-type female connector on side 2. Our low PIM RF attenuator is rated for a maximum attenuation value of 20 dB. The Pasternack PE7480-20 attenuator is rated for frequency range between 600 MHz to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The attenuator has a black anodized aluminum heatsink N-type connector with gold-plated beryllium copper contact. Our fixed RF attenuator PE7480-20 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 20 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements.

1 : $1,570.0
5 : $1,538.6
10 : $1,507.2
25 : $1,475.8

PE3W16480/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Female Bulkhead to SMA Male Cable Using RG316 Coax with HeatShrink. PE3W16480/HS is a reverse polarity TNC female bulkhead to SMA male cable using RG316 coax. This Pasternack reverse polarity TNC female bulkhead to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity female TNC bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W16480/HS TNC reverse polarity female bulkhead to SMA male cable assembly is constructed with RG316 coax.

PE44807

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Clamp/Solder, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 18 GHz, Interface Type 1: PE-P300LL. N Female Bulkhead Mount Precision Connector Clamp/Solder Attachment for PE-P300LL. PE44807 type N female bulkhead coaxial connector has an interface type of PE-P300LL and a 50 Ohm impedance. Pasternack type N female bulkhead connector uses shield/contact clamp/solder as an attachment method. Our female N type coaxial connector provides a minimum frequency of DC and a maximum frequency of 18 GHz. The Pasternack type N female bulkhead coaxial connector has a PEI dielectric type and a VSWR of 1.16. The Pasternack type N coaxial connector has a passivated stainless steel body. Our PE44807 type N connector uses beryllium copper contact. This type N female bulkhead coaxial RF connector is RoHS and REACH compliant. This Pasternack female N type bulkhead connector will ship the same day as purchased. Our bulkhead type N female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom type N connector cable assemblies that will ship the same day as well.

1 : $201.99
25 : $191.89
50 : $181.79
100 : $173.71

PE3480LF/HSRD

Pasternack Enterprises

PE3C1480

Pasternack Enterprises

PE3W14803LF

Pasternack Enterprises

Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. HN Male to N Male Right Angle Cable Using RG142 Coax, LF Solder. PE3W14803LF is a HN male to N male right angle cable using RG142 coax. This Pasternack HN male to N male right angle cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm N for connector 2. HN to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male HN to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14803LF HN male to N male right angle cable assembly is constructed with RG142 coax.

PE48095

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: SMP, Connector Gender: Male, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Solder, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 26.5 GHz, Interface Type 1: PE-SR405AL, Interface Type 2: PE-SR405FL, Interface Type 3: PE-SR405FLJ, Interface Type 4: PE-SR405TN, Interface Type 5: RG405. SMP Male Bulkhead Mount Engineering Grade Smooth Bore Connector Solder Attachment for PE-SR405AL, PE-SR405FL, PE-SR405FLJ, PE-SR405TN, RG405. PE48095 SMP male bulkhead coaxial engineering grade smooth bore connector has an interface type of SMP male, which is compatible with PE-SR405AL, PE-SR405FL, PE-SR405FLJ, PE-SR405TN and RG405 cables, and has an impedance of 50 Ohms. Pasternack’s SMP male bulkhead connector uses solder as an attachment method. Our male SMP coaxial connector provides a maximum frequency of 26.5 GHz. This SMP male engineering grade RF connector is stocked to be readily available for same business day shipment and can also be designed onto custom cable configurations using our online cable creator. The Pasternack SMP male bulkhead coaxial smooth bore connector has a PTFE dielectric type and a VSWR of 1.25:1. Pasternack’s SMP coaxial connector has a passivated stainless steel body. Our PE48095 SMP connector uses a gold over nickel-phosphorus alloy over copper-plated beryllium copper contact. The Pasternack engineering grade RF connector has a maximum inner and outer conductor resistance of 6 mOhms and 2 mOhms, respectively. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector made from passivated stainless steel material has a contact life of 1000 cycles or more. The PE48095 SMP bulkhead engineering grade connector operates at a temperature range of -65 to 165 deg C. Our push-on male SMP coaxial RF connector has a maximum insertion loss of 0.309 dB. This SMP connector has a gold over nickel-phosphorus alloy over copper inner contact plating. The Pasternack engineering grade SMP male connector has a maximum operating voltage of 335 Vrms and a dielectric withstanding voltage of 500 Vrms. This coaxial RF connector comes with a minimum insulation resistance of 5,000 MOhms. Our SMP male connector has a length of 0.366 inches, a width of 0.229 inches, and a weight of 0.05 lbs. This engineering grade push-on SMP male coaxial connector features a passivated stainless steel coupling nut. This Pasternack engineering grade male SMP bulkhead connector will ship the same business day as purchased. Our bulkhead SMP male coaxial connector is part of over one million RF, microwave, and millimeter wave components in stock for local, domestic, and international shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $49.99
25 : $47.99
50 : $46.49
100 : $45.49

Teledyne HiRel

5962-8764804XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 120 NS ACCESS TIME
RoHS : Not Compliant

M38510/34803B2A

Teledyne HiRel

BUS TRANSCEIVER, 8-BIT, WITH INVERTING 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8764804ZA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 120 NS ACCESS TIME
RoHS : Not Compliant

5962-9314801M2A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8764801XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 150 NS ACCESS TIME
RoHS : Not Compliant

5962-9314801Q2A

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-9214801QRA

Teledyne HiRel

BUS TRANSCEIVER, 8-BIT, WITH INVERTING 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8764805XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 90 NS ACCESS TIME
RoHS : Not Compliant

5962-8764806XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 70 NS ACCESS TIME
RoHS : Not Compliant

5962-8764801ZA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 150 NS ACCESS TIME
RoHS : Not Compliant

5962-9314801QSA

Teledyne HiRel

FLIP-FLOP, D-TYPE, 8-BIT, WITH CLOCK ENABLE, TTL-COMPATIBLE INPUTS
RoHS : Not Compliant

5962-8764802XA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 200 NS ACCESS TIME
RoHS : Not Compliant

M38510/34803BSA

Teledyne HiRel

BUS TRANSCEIVER, 8-BIT, WITH INVERTING 3-STATE OUTPUTS
RoHS : Not Compliant

5962-8764804YA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 120 NS ACCESS TIME
RoHS : Not Compliant

5962-8764802YA

Teledyne HiRel

PROM, UV ERASABLE, 64K X 8, 200 NS ACCESS TIME
RoHS : Not Compliant

Venkel Ltd.

HPTF0805-TC-3480AT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�50PPM;348R;�0.05%
RoHS : Compliant

HPTF1206-TE-3480UT

VENKEL LTD

High Power Thin Film CR;1206;1/4W;�25PPM;348R;�0.01%
RoHS : Compliant

HPTF2512-WE-3480AT

VENKEL LTD

High Power Thin Film CR;2512;3/4W;�25PPM;348R;�0.05%
RoHS : Compliant

MELFC0102-RK-3480FT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/8W;�100PPM;348R;�1%
RoHS : Compliant

MELFC0207-VE-3480DT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�25PPM;348R;�0.5%
RoHS : Compliant

HPTF0603-QC-3480UT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�50PPM;348R;�0.01%
RoHS : Compliant

HPTF0603-QP-3480DT

VENKEL LTD

High Power Thin Film CR;0603;1/10W;�5PPM;348R;�0.5%
RoHS : Compliant

HPTF0603-SC-3480AT

VENKEL LTD

High Power Thin Film CR;0603;1/6W;�50PPM;348R;�0.05%
RoHS : Compliant

HPTF1210-UN-3480UT

VENKEL LTD

High Power Thin Film CR;1210;1/3W;�10PPM;348R;�0.01%
RoHS : Compliant

HPTF2010-UE-3480CT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�25PPM;348R;�0.25%
RoHS : Compliant

HPTF2010-UN-3480BT

VENKEL LTD

High Power Thin Film CR;2010;1/3W;�10PPM;348R;�0.1%
RoHS : Compliant

AGCR2010-XK-3480FT

VENKEL LTD

Auto Grade Resistor;2010;1W;�100PPM;348R;�1%
RoHS : Compliant

MELFC0204-ZZ-3480FT

VENKEL LTD

MELF Coated Thin Film CR;0204;2/5W;�15PPM;348R;�1%
RoHS : Compliant

MELFM0207-VE-3480DT

VENKEL LTD

MELF Molded Thin Film CR;0207;1/2W;�25PPM;348R;�0.5%
RoHS : Not Compliant

MELFC0102-UZ-3480BT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�15PPM;348R;�0.1%
RoHS : Compliant

Vyrian

GB4800023

Diodes Incorporated

Parallel - 3Rd Overtone Quartz Crystal, 48MHz Nom

15,093

51762-10404800AALF

Amphenol Communications Solutions

Board Connector, 52 Contact(s), 4 Row(s), Female, Right Angle, Solder Terminal, Guide Pin, Receptacle

13,357

5-1814805-1

TE Connectivity

RF TNC Connector, 1 Contact(s), Female, Board Mount, Solder Terminal, Locking, Jack
RoHS : Compliant

13,119

5448051

Phoenix Contact

Barrier Strip Terminal Block, 8A, 1.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

12,395

MAX6480BL18BD1

Analog Devices Inc

Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6
RoHS : Not Compliant

11,009

MAX6480BL17AD3

Analog Devices Inc

Fixed/Adjustable Positive LDO Regulator, 1.229V Min, 5V Max, BICMOS, PBGA6
RoHS : Not Compliant

10,897

AD9480ASUZ-250

Analog Devices Inc

ADC, Proprietary Method, 8-Bit, 1 Func, 1 Channel, Parallel, Word Access, BICMOS, PQFP44
RoHS : Compliant

10,152

5962-9214801MSA

Texas Instruments

8,477

ADA4805-2ACPZ-R2

Analog Devices Inc

Operational Amplifier, 2 Func, 125uV Offset-Max, BIPolar, PDSO10
RoHS : Compliant

7,864

5962-01-064-8074

Analog Devices Inc

D/A Converter, 1 Func, CDIP16
RoHS : Not Compliant

7,755

48092

Littelfuse Inc

Batteries/Accessories

5,540

ACPL-4800-560E

Broadcom Limited

Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation
RoHS : Compliant

4,035

5962-9214801M2X

Texas Instruments

3,418

EPM9480RI208-15C

Altera Corporation

EE PLD, 16.4ns, CMOS, PQFP208

2,878

5962-8994801QUA

AMD Xilinx

Field Programmable Gate Array, 64 CLBs, 2000 Gates, 50MHz, CMOS, CQFP100

2,654

Win Source Electronics

MA2Z74800L

Panasonic Electronic Components

DIODE SCHOTTKY 20V 300MA SMINI2

5,150 : $0.0653
3,850 : $0.0728
2,980 : $0.0753
2,160 : $0.0778
1,395 : $0.0803
575 : $0.0979

45,690

PI3CH480LE

Diodes Incorporated

IC MUX/DEMUX 4 X 2:1 16TSSOP
RoHS : Compliant

645 : $0.5216
485 : $0.5818
375 : $0.6019
275 : $0.6219
175 : $0.642
75 : $0.7824

40,000

MIC4802YME-TR

Microchip Technology Inc

IC LED DRVR LIN PWM 800MA 8SOIC / LED Driver IC 1 Output Linear PWM Dimming 800mA 8-SOIC-EP
RoHS : Compliant

240 : $1.4125
180 : $1.5755
140 : $1.6298
100 : $1.6841
65 : $1.7385
30 : $2.1187

35,150

AO4805L

Alpha & Omega Semiconductor

MOSFET 2P-CH 30V 9A 8-SOIC / Dual P-Channel Enhancement Mode Field Effect Transistor
RoHS : Compliant

985 : $0.3414
790 : $0.3553
610 : $0.3692
425 : $0.3968
275 : $0.4107
130 : $0.4385

22,340

503480-0600

Molex

0.50mm (.020") Pitch Easy-On BackFlip FPC Connector, 1.00mm (.039") Height, Right Angle, SMT, Dual Contact
RoHS : Compliant

465 : $0.65
345 : $0.725
270 : $0.75
195 : $0.775
125 : $0.8
55 : $0.975

22,260

FSA4480UCX

onsemi

ANALOG SWITCH
RoHS : Compliant

440 : $0.6876
330 : $0.7669
255 : $0.7933
185 : $0.8198
120 : $0.8462
50 : $1.0313

21,000

LM3480IM3X-15/NOPB

Texas Instruments

IC REG LDO 15V 0.1A SOT23-3
RoHS : Compliant

385 : $0.7861
290 : $0.8768
225 : $0.907
165 : $0.9373
105 : $0.9675
45 : $1.1791

9,480

48037-2200

Molex

48037-2200 Molex USB Connectors USB A PLUG SMT STR S SHELL LEG 3.8mm L/F datasheet, inventory, & pricing.
RoHS : Compliant

465 : $0.646
350 : $0.7205
270 : $0.7453
195 : $0.7702
130 : $0.795
55 : $0.9689

9,000

ATMEGA4809-AU

Microchip Technology Inc

IC MCU 8BIT 48KB FLASH 48TQFP / AVR series Microcontroller IC 8-Bit 20MHz 48KB (24K x 16) FLASH 48-TQFP (7x7)
RoHS : Compliant

114 : $2.6462
85 : $2.9515
66 : $3.0533
48 : $3.1551
31 : $3.2568
13 : $3.9693

8,889

0479480001

Molex

RF ANT 2.4GHZ CHIP SOLDER SMD
RoHS : Compliant

260 : $1.3039
195 : $1.4543
150 : $1.5045
110 : $1.5547
70 : $1.6047
30 : $1.9557

3,850

BTB24-800BRG

STMicroelectronics

TRIAC 800V 25A TO220AB
RoHS : Compliant

127 : $2.3668
95 : $2.6399
74 : $2.731
54 : $2.822
35 : $2.913
15 : $3.5502

2,000

LMK04806BISQ/NOPB

Texas Instruments

Low-Noise Clock Jitter Cleaner
RoHS : Compliant

21 : $14.797
17 : $15.3985
13 : $16.0
9 : $17.2031
6 : $17.8046
3 : $19.0076

1,780

48074-9101

Molex

Conn Modular Jack F 8 POS 1.02mm Solder RA SMD 12 Terminal 1 Port
RoHS : Compliant

22 : $13.7511
17 : $15.3378
13 : $15.8667
10 : $16.3956
6 : $16.9244
3 : $20.6266

1,240

MAX14808ETK

Maxim Integrated Products

6 : $54.7369
5 : $61.0527
4 : $63.1579
3 : $65.2632
2 : $67.3685
1 : $82.1053

960

ATMEGA4809-AUR

Microchip Technology Inc

IC MCU 8BIT 48KB FLASH 48TQFP / AVR megaAVR® 0, Functional Safety (FuSa) Microcontroller IC 8-Bit 20MHz 48KB (24K x 16) FLASH 48-TQFP (7x7)
RoHS : Compliant

135 : $2.2341
101 : $2.4918
78 : $2.5777
57 : $2.6637
37 : $2.7496
15 : $3.3511

480DCNRWNFZCWC Reseller

Enlace URL