 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
4G-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
 Avnet Americas | QRE1114GR | onsemi | Photointerrupter Reflective Single 940nm 4-Pin SMD T/R - Tape and Reel (Alt: QRE1114GR) RoHS : Compliant |
| 32,000 | |
| QSB34GR | onsemi | Surface Mount Silicon Infrared PIN Photodiode. ONSSPCISTNJZ8E4V; - Tape and Reel (Alt: QSB34GR) RoHS : Compliant |
| 6,000 | ||
| RLR07C1204GRRE6 | Vishay Intertechnologies | Through Hole Resistor, 1.2 Mohm, RLR Series, 250 mW, ? 2%, Axial Leaded, 250 V, Metal Film - Tape and Reel (Alt: RLR07C1204GRRE6) RoHS : Not Compliant |
| 1,000 | ||
| RL20S224GRE5 | Vishay Intertechnologies | CMF-20 220K 2% T-00 RL20S224G RE5 - Tape and Reel (Alt: RL20S224GRE5) RoHS : Not Compliant |
| 500 | ||
| RLR07C1004GRB14 | Vishay Intertechnologies | Through Hole Resistor, 1 Mohm, RLR Series, 250 mW, ? 2%, Axial Leaded, 250 V, Metal Film - Bulk (Alt: RLR07C1004GRB14) RoHS : Not Compliant |
| 8 | ||
| KHSS-14G-RSC-12 | Omega Engineering | UTILITY THERMOCOUPLE HANDLE PROBES - Bulk (Alt: KHSS-14G-RSC-12) RoHS : Not Compliant |
| 0 | ||
| MPQ4324GRHE-4001-AEC1-P | Monolithic Power Systems | 36V, 4A PEAK,ULTRA-COMPACT, LOW IQ, SYNCHRONOUSSTEP-DOWN CON - Tape and Reel (Alt: MPQ4324GRHE-4001-AEC1-P) RoHS : Not Compliant |
| 0 | ||
| APH-0314-G-R | Samtec Inc | - Bulk (Alt: APH-0314-G-R) RoHS : Compliant |
| 0 | ||
| HLT-1314-G-R | Samtec Inc | - Bulk (Alt: HLT-1314-G-R) RoHS : Compliant | 0 | |||
| 10127721-164GRLF | Amphenol Corporation | Connector Power Header 16 Position 3mm Solder Straight Through Hole 16 Terminal 1 Port T/R - Tape and Reel (Alt: 10127721-164GRLF) RoHS : Not Compliant |
| 0 | ||
| APO-324-G-R | Samtec Inc | - Bulk (Alt: APO-324-G-R) RoHS : Compliant |
| 0 | ||
| RLR07C2004GRRE7 | Vishay Intertechnologies | Through Hole Resistor, 2 Mohm, RLR Series, 250 mW, ? 2%, Axial Leaded, 250 V, Metal Film - Tape and Reel (Alt: RLR07C2004GRRE7) RoHS : Not Compliant |
| 0 | ||
| RLR07C5604GRRE723 | Vishay Intertechnologies | Through Hole Resistor, 5.6 Mohm, RLR Series, 250 mW, ? 2%, Axial Leaded, 250 V, Metal Film - Tape and Reel (Alt: RLR07C5604GRRE723) RoHS : Not Compliant |
| 0 | ||
| RLR07C8204GRB1423 | Vishay Intertechnologies | Through Hole Resistor, 8.2 Mohm, RLR Series, 250 mW, ? 2%, Axial Leaded, 250 V, Metal Film - Bulk (Alt: RLR07C8204GRB1423) RoHS : Not Compliant |
| 0 | ||
| RLR07C8204GRRE823 | Vishay Intertechnologies | Through Hole Resistor, 8.2 Mohm, RLR Series, 250 mW, ? 2%, Axial Leaded, 250 V, Metal Film - Tape and Reel (Alt: RLR07C8204GRRE823) RoHS : Not Compliant |
| 0 | ||
 Mouser Electronics | TLP185(V4GRTR,SE | Toshiba America Electronic Components | Transistor Output Optocouplers 50mA 80V 3750Vrms 50 RoHS : Compliant |
| 4,193 | |
| MP2724GRH-0000-Z | Monolithic Power Systems | Battery Management 2.2A, Single-Cell, I2C-Controlled Buck Charger with USB Type-C Sink Mode and 15mA Termination Current RoHS : Compliant |
| 3,930 | ||
| TB004-750-04GR | Same Sky | Fixed Terminal Blocks 4 Poles, Screw Type, Horizontal, 7.50 mm Pitch, 24-12 (AWG) RoHS : Compliant |
| 3,379 | ||
| TB0014-500-04GR | Same Sky | Fixed Terminal Blocks Terminal Block, Screw Type, Horizontal Wire Entry, Green, 4 pole, 5.0mm pitch, Slotted Screw RoHS : Compliant |
| 2,974 | ||
| TB0014-508-04GR | Same Sky | Fixed Terminal Blocks Terminal Block, Screw Type, Horizontal Wire Entry, Green, 4 pole, 5.08 pitch, Slotted Screw RoHS : Compliant |
| 2,254 | ||
| TB0012-508-04GR | Same Sky | Fixed Terminal Blocks Terminal block, screw type, 5.08, 19.20mm height, horizontal, 4 poles, Green, slotted screw, PCB mount RoHS : Compliant |
| 1,864 | ||
| TB0013-500-P04GR | Same Sky | Fixed Terminal Blocks Terminal Block, Screw Type, Horizontal Wire Entry, Green, 4 pole, 5.0mm pitch, Phillips Screw RoHS : Compliant |
| 1,787 | ||
| TBL-0021-500-04GR | Same Sky | Fixed Terminal Blocks 4 Poles, Screwless, Horizontal, 5.0 Pitch, 24-12 (AWG), Terminal Block Connector RoHS : Compliant |
| 1,383 | ||
| TB0015-500-04GR | Same Sky | Fixed Terminal Blocks 4 Poles, Screwless, 45, 5.0 mm Pitch, 30-16 (AWG), Green, Terminal Block Connector RoHS : Compliant |
| 1,080 | ||
| TBL002B-350-04GR-2OR | Same Sky | Fixed Terminal Blocks 4 Poles, Screwless, 45, 3.50 mm Pitch, 24-18 (AWG) RoHS : Compliant |
| 790 | ||
| TB0015-500-2-04GR | Same Sky | Fixed Terminal Blocks 4 Poles, Screwless, 45, 5.0 mm Pitch, 30-16 (AWG), Green, Double Deck, Terminal Block Connector RoHS : Compliant |
| 720 | ||
| TB0010-500-04GR | Same Sky | Fixed Terminal Blocks 2~12 Poles, Screw Type, Horizontal, 5.0 Pitch, 22~14 (AWG), Terminal Block Connector RoHS : Compliant |
| 683 | ||
| TBL-0020-500-04GR | Same Sky | Fixed Terminal Blocks 4 Poles, Screwless, Vertical, 5.0 Pitch, 24-12 (AWG), Terminal Block Connector RoHS : Compliant |
| 421 | ||
| TB0015-500-3-04GR | Same Sky | Fixed Terminal Blocks 4 Poles, Screwless, 45, 5.0 mm Pitch, 30-16 (AWG), Green, Tripple Deck, Terminal Block Connector RoHS : Compliant |
| 396 | ||
| RLR07C1004GRB14 | Vishay Intertechnologies | Metal Film Resistors - Through Hole 1M OHM 2% ERL-07 |
| 300 | ||
 Newark | TB0011-350-04GR | Same Sky | Terminal Block, Wtb, 4Way, 24-18Awg, Gr; |Same Sky TB0011-350-04GR RoHS : Compliant |
| 894 | |
| QSB34GR | onsemi | Pin Photo Diode, 940Nm, Plcc-2; |Onsemi QSB34GR RoHS : Compliant |
| 164 | ||
| QSB34GR | onsemi | Pin Photo Diode, 940Nm, Plcc-2; |Onsemi QSB34GR RoHS : Compliant |
| 164 | ||
| TRD824-GRN-5F | L-com Inc | Enet Cbl, Cat8, Rj45 Plug To Rj45 Plug; |L-Com TRD824-GRN-5F RoHS : Compliant |
| 72 | ||
| TRD824-GRN-7F | L-com Inc | Enet Cbl, Cat8, Rj45 Plug To Rj45 Plug; |L-Com TRD824-GRN-7F RoHS : Compliant |
| 63 | ||
| TRD824-GRN-15F | L-com Inc | Enet Cord, Cat8, Rj45 Plug-Plug, 15Ft; |L-Com TRD824-GRN-15F RoHS : Compliant |
| 21 | ||
| FMCA2674/GR-12 | Fairview Microwave Inc | Cbl Assy, Bnc Plug-Hd Bnc Plug, 12"; |Fairview Microwave FMCA2674/GR-12 RoHS : Not Compliant |
| 10 | ||
| TRD695RA4GRY-3 | L-com Inc | Ethernet Cbl, Cat6; |L-Com TRD695RA4GRY-3 RoHS : Compliant |
| 10 | ||
| FMCA2674/GR-120 | Fairview Microwave Inc | Cbl Assy, Bnc Plug-Hd Bnc Plug, 120"; |Fairview Microwave FMCA2674/GR-120 RoHS : Not Compliant |
| 10 | ||
| TRD815SRA4GRY-25 | L-com Inc | Enet Cbl, Cat5E, 90° Rj45 Pl-90° Rj45 Pl; |L-Com TRD815SRA4GRY-25 RoHS : Compliant |
| 8 | ||
| TRD695RA4GRY-7 | L-com Inc | Ethernet Cbl, Cat6; |L-Com TRD695RA4GRY-7 RoHS : Compliant |
| 7 | ||
| TRD815SRA4GRY-2 | L-com Inc | Enet Cbl, Cat5E, 90° Rj45 Pl-90° Rj45 Pl; |L-Com TRD815SRA4GRY-2 RoHS : Compliant |
| 5 | ||
| FMCA2604/GR-120 | Fairview Microwave Inc | Cbl Assy, Hd Bnc Plug-Plug, 75 Ohm, 120"; |Fairview Microwave FMCA2604/GR-120 RoHS : Not Compliant |
| 5 | ||
| LED201-02-04 (GREEN) | Moflash Signaling Ltd | Beacon, Conti/Flash/Rotate, 24V, Grn; |Moflash Signalling LED201-02-04 (GREEN) RoHS : Compliant |
| 4 | ||
| VABM-L1-10HW-G18-4-GR | Festo | Manifold Rail, 4 Outlet, G1/8, M7; |Festo VABM-L1-10HW-G18-4-GR RoHS : Compliant |
| 2 | ||
 RS | 900-SUN-7.5/04-GR | WECO Electrical Connectors | CONNECTOR TAB TAB CONNECTION SUN 7 MM 4 0.051 IN. |
| 345 | |
| AT13-6P-BM04GRY | Amphenol Sine Systems | CONNECTOR 6POS R/AFLANGE PCBRECEPTACLE POTTED GRAY TINPLATED CONT |
| 300 | ||
| B2 1/4 GRAY SPL | SUMITOMO ELECTRIC Interconnect Products | HEAT SHRINK TUBING, FLEX POLYOLEFIN, 1/4", 2:1, +135C, GRAY, 200' SPOOL |
| 200 | ||
| RLR07C2204GRB14 | Vishay Dale | RESISTOR, METAL FILM, RES 2.2 MEGOHMS, 0.25 W, TOL 2%, AXIAL, EPOXY COAT, BULK RoHS : Not Compliant |
| 100 | ||
| 42514 (QT 14 GREY) | icotek Corporation | CABLE GROMMETS FOR QUICK SYSTEMS, QT14, GRAY |
| 63 | ||
| N6PAT4GRS | StarTech | SLIM CAT6 ETHERNET CABLE, SNAGLESS RJ45, 28AWG BARE COPPER, LSZH, 4FT, GRAY |
| 20 | ||
| 6714 GR005 (NULL) | Alpha Wire | HOOK-UP WIRE, ECOWIRE,6714, GREEN, 20 AWG, 10X30,MPPE INS,600V |
| 13 | ||
| 33164GREY | Akro-Mils | GRID BOX, AKRO-GRID BOX 16-1/2 X 10-7/8 X 4 |
| 12 | ||
| F2211/4 GR064 | Alpha Wire | HEAT SHRINK TUBING, 1/4" ID, 2:1, GREENXLPO, 6" PIECE(X20), FIT |
| 10 | ||
| LW6J-31C74GRG | IDEC Corporation | KEY SELECTOR SWITCH ILL |
| 5 | ||
| 45152 (KVT-SNAP - 63/4 GREY) | icotek Corporation | SPLIT CABLE GLAND FOR SNAP-IN MOUNTING, KVT SNAP - 63/4, GRAY |
| 5 | ||
| C6ASPAT4GR | StarTech | 4 FT GRAY CAT6A ETHERNET PATCH CABLE - SHIELDED (STP) |
| 4 | ||
| F2213/4 GR105 | Alpha Wire | HEAT SHRINK TUBING, 3/4" ID, 2:1, XLPO, 4 PIECE(X5), GREEN, FIT |
| 3 | ||
| 364 GRN/YEL CX/500 | Olympic Wire & Cable Corp | HOOK-UP WIRE, 16 AWG, 26X30, TC, PVC INS, GRN/YEL, UL1015, UL1032,MTW, BC-5W2,TEW |
| 3 | ||
| F082814 (GRS-H-40-48-D-0-0-0-0) | GEFRAN spa | SINGLE-PHASE SOLID STATE RELAY, UP TO 120A INTEGRATED HEATSINK |
| 1 | ||
 STMicroelectronics | STC4054GR | STMicroelectronics | 800mA Standalone linear Li-Ion battery charger with thermal regulation RoHS : Compliant |
| 7,036 | |
 Bisco Industries | SC-274-G RED | Caplugs | 8,200 | |||
| PC00250 1/4 GREEN | Caplugs | 2,000 | ||||
| X2014-GRGB | Trim-Lok Inc | 500 | ||||
| 1635F 1/4" GREEN SP | Dunbar | 250 | ||||
 Onlinecomponents.com | RFPCB-SMB-F-R-4G-19 | L-com Inc | RoHS : Compliant |
| 0 | |
| RFPCB-SMB-M-R-4G-18 | L-com Inc | RF PCB CONNECTOR, SMB MALE RoHS : Compliant |
| 0 | ||
 Rochester Electronics | SN74ALVCF162834GR | Texas Instruments | Bus Driver, ALVC/VCX/A Series, 1-Func, 18-Bit, True Output, CMOS, PDSO56 RoHS : Compliant |
| 23,080 | |
SN74ALVCH162244GR | Texas Instruments | Buffer/Line Driver Buffer, Non-Inverting 4 Element 4 Bits 1.8V, 2.5V, 3.3V 48-SOP T/R RoHS : Compliant |
| 792 | ||
SN74ALVCH162374GR | Texas Instruments | Flip Flop Positive Edge 2 Element 1.8V, 2.5V, 3.3V 48-SOP T/R RoHS : Compliant |
| 4,761 | ||
SN74LVTH16374GRDR | Texas Instruments | Bus Driver, LVT Series, 2-Func, 8-Bit, True Output, BICMOS, PBGA54 RoHS : Not Compliant |
| 159,233 | ||
SN74ALVTH162244GR | Texas Instruments | Bus Driver, ALVT Series, 16-Func, 4-Bit, True Output, BICMOS, PDSO48 RoHS : Compliant |
| 19,565 | ||
| 74ALVCH16244GRDR | Texas Instruments | Bus Driver, ALVC/VCX/A Series, 4-Func, 4-Bit, True Output, CMOS, PBGA54 RoHS : Not Compliant |
| 8,000 | ||
| QSB34GR_SN00349 | Fairchild Semiconductor Corporation | PIN Photodiode RoHS : Compliant |
| 1,000 | ||
UPA1814GR-9JG-E1-A | Renesas Electronics Corporation | UPA1814GR - Pch Single Power MOSFET -30V -7.0A 16Mohm Tssop8 RoHS : Compliant |
| 9,000 | ||
| UPA1874GR-9JG-E1-A | Renesas Electronics Corporation | Power Field-Effect Transistor, 8A I(D), N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant |
| 9,000 | ||
| UPA2714GR-E1-A | Renesas Electronics Corporation | Small Signal Field-Effect Transistor, 7A I(D), 1-Element, P-Channel, Metal-oxide Semiconductor FET RoHS : Compliant |
| 5,000 | ||
| UPA2754GR-E1-AT | Renesas Electronics Corporation | Power Field-Effect Transistor, 11A, 30V, N-Channel MOSFET RoHS : Compliant |
| 4,799 | ||
| UPA2754GR-E2-A | Renesas Electronics Corporation | Power Field-Effect Transistor, 11A, 30V, N-Channel MOSFET RoHS : Compliant |
| 4,850 | ||
| UPC1934GR-1JG-E1-A | Renesas Electronics Corporation | Switching Regulator/Controller, Voltage-mode, 0.02A, 1000kHz Switching Freq-Max, BICMOS, PDSO16 RoHS : Compliant |
| 2,500 | ||
| TLP781(D4-GR,F) | Toshiba America Electronic Components | Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant |
| 22,000 | ||
| TLP781(D4-GRL,F) | Toshiba America Electronic Components | TLP781 - Photocoupler (phototransistor output) |
| 2,300 | ||
 Sager | LW6J-3-4GRB | IDEC Corporation | Keylock Switches Key Selector Switch Operator | 0 | ||
| LW6J-31C74GRG-501 | IDEC Corporation | Keylock Switches Key Selector Switch ILL |
| 0 | ||
| LW6MJ-31C24GRB | IDEC Corporation | Keylock Switches Key Selector Switch ILL |
| 0 | ||
| LW6MJ-33C64GRD | IDEC Corporation | Keylock Switches Key Selector Switch ILL | 0 | |||
| UTP6ASD14GR | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 6A (SD), Green UT RoHS : Compliant | 0 | |||
| UTPCH14GRY | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 5e, Green UTP Cab RoHS : Compliant | 0 | |||
| APH-0314-G-R | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant |
| 0 | ||
| APH-1524-G-R | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 44GR20KLFTB | TT electronics / BI Technologies | Trimmer Resistors - SMD 1/4W 20K Ohms 10% MULTI TURN |
| 0 | ||
| HLT-1314-G-R | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 44GR25KLFT7 | TT electronics / BI Technologies | Trimmer Resistors - SMD 1/4W 25K Ohms 10% MULTI TURN RoHS : Compliant |
| 0 | ||
| APH-0604-G-R | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| APH-1814-G-R | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| APO-324-G-R | Samtec Inc | IC & Component Sockets .100 Low Profile Screw Machine Dip Adaptor RoHS : Compliant |
| 0 | ||
| APH-0614-G-R | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
 TME | AC141R-04P-2.54-GRAY | Ninigi | Connector: PCB terminal block; terminal; 2A; 150V; PIN: 4; on PCBs |
| 2,457 | |
| F.66.04GR | Thomas & Betts | Braid; ØBraid : 3÷7nom.4mm; polyamide; grey; -55÷135°C |
| 0 | ||
| FR14GR69V4T | Mersen Electrical Power | Fuse: fuse; 14.3x51mm; ceramic,cylindrical; clip-on; 4A; 690VAC RoHS : Compliant |
| 0 | ||
| FR14GR69V16 | Mersen Electrical Power | Fuse: fuse; 14.3x51mm; ceramic,cylindrical; clip-on; 16A; 690VAC RoHS : Compliant |
| 0 | ||
| FR14GR69V20 | Mersen Electrical Power | Fuse: fuse; 14.3x51mm; ceramic,cylindrical; clip-on; 20A; 690VAC RoHS : Compliant |
| 0 | ||
| ACAR X4 GREY | Hsk Data | Plug socket strip: protective; Sockets: 4; 230VAC; 10A; grey |
| 0 | ||
AP-CF004GRANS-ETNRC | Apacer Technology Inc | Memory card; CF,SLC; 4GB; industrial; R: 110MB/s; W: 80MB/s RoHS : Compliant |
| 0 | ||
| FR14GR69V63 | Mersen Electrical Power | Fuse: fuse; 14.3x51mm; ceramic,cylindrical; clip-on; 63A; 690VAC RoHS : Compliant |
| 0 | ||
| PS2501-4GRG | Isocom Components | Optocoupler; THT; Ch: 4; OUT: transistor; 5kV; CTR@If: 100-300%@5mA RoHS : Compliant |
| 0 | ||
| YBS3004G RAG | Taiwan Semiconductor | Bridge rectifier: single-phase; Urmax: 400V; If: 3A; Ifsm: 110A; YBS |
| 0 | ||
| PS2501-4GRSM | Isocom Components | Optocoupler; SMD; Ch: 4; OUT: transistor; 5kV; CTR@If: 100-300%@5mA RoHS : Compliant |
| 0 | ||
| TBP03R2-350-04GR | Same Sky | Connector: pluggable terminal block; socket; male; 7A; 250V; PIN: 4 RoHS : Compliant |
| 0 | ||
| TLP621-4GR | Isocom Components | Optocoupler; THT; Ch: 4; OUT: transistor; Uinsul: 5kV; Uce: 55V; DIP16 RoHS : Compliant |
| 0 | ||
| R713FE2-SXXX2B4GRW | E-Switch Inc | ROCKER; SP3T; Pos: 3; ON-OFF-ON; 16A/30VDC; black; black; 12V; 0÷55°C RoHS : Compliant |
| 0 | ||
| SN74ALVCH162244GR | Texas Instruments | IC: digital; buffer; Ch: 16; CMOS; SMD; TSSOP48; -40÷85°C; reel,tape RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | TLP383(D4GR-TL,E(T | Toshiba America Electronic Components | RoHS : Compliant | 11,383 | ||
| STC4054GR | STMicroelectronics | STC4054 Series 6.5 V 0.8 A Linear Li-Ion Battery Charger Thermal Regulation -TSOT23-5 RoHS : Compliant | 3,080 | |||
| SN74ALVCH162244GR | Texas Instruments | IC BUFF/DVR TRI-ST 16BIT 48TSSOP RoHS : Compliant | 2,000 | |||
| SN74ALVTH162244GR | Texas Instruments | IC BUFF/DVR TRI-ST 16BIT 48TSSOP RoHS : Compliant | 2,000 | |||
 ComSIT USA | TLP781D4GRTP6F | Toshiba America Electronic Components | GAAS IRED AND PHOTO-TRANSISTOR PHOTOCOUPLER Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant | 70,070 | ||
| HER104GR0 | TSC Electronics Ltd | GLASS PASSIVATED HIGH EFFICIENT RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 1A, 300V V(RRM), Silicon, DO-41 RoHS : Compliant | 9,700 | |||
| SF24GR0 | TSC Electronics Ltd | GLASS PASSIVATED SUPER FAST RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 2A, 500V V(RRM), Silicon, DO-15 RoHS : Compliant | 6,700 | |||
| 2SC4944GRTE85LF | Toshiba America Electronic Components | Small Signal Bipolar Transistor, 0.15A I(C), 50V V(BR)CEO, 2-Element, NPN, Silicon RoHS : Compliant | 6,000 | |||
| TLP781FD4GRLF7F | Toshiba America Electronic Components | Photocoupler IRED And Photo-Transistor Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant | 1,900 | |||
| TLP781D4GRF | Toshiba America Electronic Components | GAAS IRED AND PHOTO-TRANSISTOR PHOTOCOUPLER Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant | 1,500 | |||
| DBS154GRD | TSC Electronics Ltd | Bridge Rectifier Diode, 1.5A, 400V V(RRM) RoHS : Compliant | 1,500 | |||
| SF64GR0 | TSC Electronics Ltd | 6.0 AMPS GLASS PASSIVATED SUPER FAST RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 6A, 200V V(RRM), Silicon, DO-201AD RoHS : Compliant | 1,250 | |||
| HER304GR0 | TSC Electronics Ltd | GLASS PASSIVATED HIGH EFFICIENT RECTIFIER Rectifier Diode, 1 Phase, 1 Element, 3A, 300V V(RRM), Silicon, DO-201AD RoHS : Compliant | 1,250 | |||
| UPA2794GR0E1AZ | Renesas Electronics Corporation | SWITCHING N AND P-CHANNEL POWER MOSFET Power Field-Effect Transistor, 5.5A I(D), N-Channel and P-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 32 | |||
 GLYN GmbH & Co. KG | TLP185(V4GRTL,SE(T | Toshiba America Electronic Components | Transistor Coupler, 3750Vrms, SO6 package RoHS : Compliant | 15,000 | ||
 Interstate Connecting Components | IM04GR | TE Connectivity | IM04GR=IM RELAY 140 MW 6 V RoHS : Compliant |
| 500 | |
| B2 (3X) 12/4 GRAY SPL | SUMITOMO ELECTRIC Interconnect Products | 113-10178 B2 (3X) 12/4 GRAY SPL |
| 450 | ||
| 10127721-164GRLF | Amphenol FCi | 10127721-164GRLF-MTK 3.0 16P D | 0 | |||
| ATP13-2P-BM04GRY | Amphenol Sine Systems | 2 POSITION 90 PCB FLANGE MOUNT | 0 | |||
| 10127721-064GRLF | Amphenol FCi | 10127721-064GRLF-MTK 3.0 06P D | 0 | |||
| 10127720-024GRLF | Amphenol FCi | 10127720-024GRLF-MTK3.0 DR 2P | 0 | |||
| 10127721-184GRLF | Amphenol FCi | 10127721-184GRLF-MTK 3.0 18P D | 0 | |||
| CIR064GRHC-40A-5S-FT | ITT Interconnect Solutions | VEAM/CIR PLG 5#0 SKT Z88330 | 0 | |||
| AT13-6P-BM04GRY | Amphenol Sine Systems | 6 POS RT ANGLE FLANGE PCB GRAY W/TIN PLATED CONTACTS |
| 0 | ||
| ATP13-4P-BM04GRY | Amphenol Sine Systems |
| 0 | |||
| ATP15-2P-BM04GRY | Amphenol Sine Systems | 2 POSITION STRAIGHT PCB FLANGE | 0 | |||
| AT15-6P-BM04GRY | Amphenol Sine Systems | 6 POSITION STRAIGHT FLANGE MOU |
| 0 | ||
| ATP13-6P-BM04GRY | Amphenol Sine Systems | 6 POSITION 90 PCB FLANGE MOUNT | 0 | |||
| ATP15-4P-BM04GRY | Amphenol Sine Systems | 4 POSITION STRAIGHT PCB FLANGE | 0 | |||
| 10127721-144GRLF | Amphenol FCi | 10127721-144GRLF-MTK 3.0 14P D | 0 | |||
 NexGen Digital | RLR07C9104GR | Vishay Huntington | 25 | |||
 PEI Genesis | AT04-4P-BM04GRN | Amphenol Sine Systems |
| 0 | ||
| ATP13-2P-BM04GRY | Amphenol Sine Systems |
| 0 | |||
| CIR064GRHC-40A-5S-FT | ITT Interconnect Solutions |
| 0 | |||
| AT13-6P-BM04GRY | Amphenol Sine Systems |
| 0 | |||
| ATP13-4P-BM04GRY | Amphenol Sine Systems |
| 0 | |||
| ATP15-2P-BM04GRY | Amphenol Sine Systems |
| 0 | |||
| AT15-6P-BM04GRY | Amphenol Sine Systems |
| 0 | |||
| ATP15-4P-BM04GRY | Amphenol Sine Systems |
| 0 | |||
| AT04-2P-D1N4GRY | Amphenol Sine Systems |
| 0 | |||
 Powell Electronics | LHA-04-GRA | Adam Technologies Inc | CONNECTOR, LOCKING BOARD HEADER, 2.54MM RoHS : Compliant |
| 1,320 | |
| AT15-6P-BM04GRY | Amphenol Sine Systems | 6 Pos Flange Mount PCB Receptacle Pin |
| 1,040 | ||
| ATP13-2P-BM04GRY | Amphenol Sine Systems | 2 Pos 90 degree PCB Flange Mount Recept |
| 132 | ||
| ATP15-4P-BM04GRY | Amphenol Sine Systems | 4 Pos Flange Mount PCB Receptacle Pin |
| 66 | ||
| AT13-6P-BM04GRY | Amphenol Sine Systems | Connector |
| 13 | ||
| AML25GBF2AA04GR | Honeywell Sensing and Control | Switch RoHS : Compliant |
| 11 | ||
 Rutronik | TLP385(D4GR-TL,E(T | Toshiba America Electronic Components | COUPLER SO6L 100-300% 5mA VDE 8 RoHS : Compliant |
| 9,000 | |
| TLP184(GR-TPL,SE(T | Toshiba America Electronic Components | COUPLER SO6 AC 100-300% 5mA 80V RoHS : Compliant |
| 3,000 | ||
| GP-GPS4GR36A-325 | Chinmore Industry Co Ltd | LTE/GNSS ANT PUC 3m cable SMA/m IP67 RoHS : Compliant |
| 2 | ||
 Chip 1 Exchange | TLP621(D4-GR,F) | Toshiba America Electronic Components | INSTOCK | 923,330 | ||
| TLP781(D4-GR.F) | Toshiba America Electronic Components | INSTOCK | 34,000 | |||
| TLP785_D4GR-T6,F | Toshiba America Electronic Components | INSTOCK | 34,000 | |||
| TLP721FD4GRTP4M | INSTOCK | 10,000 | ||||
| TLP721F(D4-GR,M,F) | Toshiba America Electronic Components | INSTOCK | 6,232 | |||
| HMA84GR7AFR4N-VK | SKH | INSTOCK | 4,416 | |||
| ALC663-VA4-GR | Realtek Semiconductor | INSTOCK | 2,500 | |||
SN74ALVTH16244GR | Texas Instruments | INSTOCK RoHS : Compliant | 894 | |||
| 44GR100KLFT7 | INSTOCK | 884 | ||||
| 1805-4 (GREEN) | APW Company | INSTOCK | 15 | |||
 Avnet Abacus | 4314 GR307 | ebm-papst | FAN Axial LxBXW119x119x32mm 24VDC 5W 170qmh cable 645mm sealed PCB (Alt: 9294305307) RoHS : Compliant | 0 | ||
| RLR07C3904GRRE5 | Vishay Intertechnologies | Through Hole Resistor 39 Mohm RLR Series 250 mW 2 Axial Leaded 250 V Metal Film - Tape and Reel (Alt: RLR07C3904GRRE5) RoHS : Not Compliant | 0 | |||
| RLR07C4704GRRSL | Vishay Intertechnologies | Through Hole Resistor 47 Mohm RLR Series 250 mW 2 Axial Leaded 250 V Metal Film - Tape and Reel (Alt: RLR07C4704GRRSL) RoHS : Not Compliant | 0 | |||
| RLR07C6804GRRE5 | Vishay Intertechnologies | Through Hole Resistor 68 Mohm RLR Series 250 mW 2 Axial Leaded 250 V Metal Film - Tape and Reel (Alt: RLR07C6804GRRE5) RoHS : Not Compliant | 0 | |||
| RLR07C4704GRRE5 | Vishay Intertechnologies | Through Hole Resistor 47 Mohm RLR Series 250 mW 2 Axial Leaded 250 V Metal Film - Tape and Reel (Alt: RLR07C4704GRRE5) RoHS : Not Compliant | 0 | |||
| RLR07C2004GRB14 | Vishay Intertechnologies | Through Hole Resistor 2 Mohm RLR Series 250 mW 2 Axial Leaded 250 V Metal Film (Alt: RLR07C2004GRB14) RoHS : Not Compliant | 0 | |||
| RLR05C1004GRB14 | Vishay Intertechnologies | Through Hole Resistor 1 Mohm RLR Series 125 mW 2 Axial Leaded 200 V Metal Film (Alt: RLR05C1004GRB14) RoHS : Not Compliant | 0 | |||
| RLR07C1004GRB14 | Vishay Intertechnologies | Through Hole Resistor 1 Mohm RLR Series 250 mW 2 Axial Leaded 250 V Metal Film (Alt: RLR07C1004GRB14) RoHS : Not Compliant | 0 | |||
| AT13-6P-BM04GRY | Amphenol Corporation | (Alt: AT13-6P-BM04GRY) RoHS : Compliant | 0 | |||
| AT15-6P-BM04GRY | Amphenol Corporation | (Alt: AT15-6P-BM04GRY) RoHS : Compliant | 0 | |||
| RLR07C6804GRB14 | Vishay Intertechnologies | Through Hole Resistor 68 Mohm RLR Series 250 mW 2 Axial Leaded 250 V Metal Film (Alt: RLR07C6804GRB14) RoHS : Not Compliant | 0 | |||
| RLR07C5104GRB14 | Vishay Intertechnologies | Through Hole Resistor 51 Mohm RLR Series 250 mW 2 Axial Leaded 250 V Metal Film (Alt: RLR07C5104GRB14) RoHS : Not Compliant | 0 | |||
| ATP13-2P-BM04GRY | Amphenol Corporation | (Alt: ATP13-2P-BM04GRY) RoHS : Compliant | 0 | |||
| ATP15-2P-BM04GRY | Amphenol Corporation | Automotive Connector Grey ATP BoardLock Series Straight Receptacle 2 Contacts PCB Pin (Alt: ATP15-2P-BM04GRY) RoHS : Compliant | 0 | |||
| CSKA40264GR0005FM | Eaton Corporation | SENSING RESISTOR402605 MOHM1 - Tape and Reel (Alt: CSKA40264GR0005FM) RoHS : Compliant | 0 | |||
Avnet Asia | TLP385(D4GR-TL,E(T | Toshiba America Electronic Components | (Alt: TLP385(D4GR-TL,E(T) RoHS : Compliant | 0 | ||
| TLP785(D4GR-F6,F(C | Toshiba America Electronic Components | (Alt: TLP785(D4GR-F6,F(C) RoHS : Compliant | 0 | |||
| TLP184(GR-TPR,SE(T | Toshiba America Electronic Components | (Alt: TLP184(GR-TPR,SE(T) RoHS : Compliant | 0 | |||
| TLP385(D4GR-TR,E(T | Toshiba America Electronic Components | Optocoupler DC-IN 1-CH DC 4-Pin SO6L T/R (Alt: TLP385(D4GR-TR,E(T) RoHS : Compliant |
| 0 | ||
| TLP185(V4GRTR,SE(T | Toshiba America Electronic Components | Optocoupler 1-CH Open Collector 3750Vrms 4-Pin SO-6 Emboss T/R (Alt: TLP185(V4GRTR,SE(T) RoHS : Compliant | 0 | |||
| TLP785(D4GR-T6,F(C | Toshiba America Electronic Components | Optocoupler DC-IN 1-CH Transistor DC-OUT 4-Pin PDIP (Alt: TLP785(D4GR-T6,F(C) RoHS : Compliant | 0 | |||
| QRE1114GR | onsemi | Photointerrupter Reflective Single 940nm 4-Pin SMD T/R (Alt: QRE1114GR) RoHS : Compliant | 0 | |||
| APHA004GR23CG-CM | Apacer Technology Inc | (Alt: APHA004GR23CG-CM) RoHS : Compliant | 0 | |||
| TLP383(D4GR-TL,E(T | Toshiba America Electronic Components | (Alt: TLP383(D4GR-TL,E(T) RoHS : Compliant | 0 | |||
| UPC844GR-9LG-E2-A/H | Renesas Electronics Corporation | OP Amp Quad 8.5V/us 3V to 32/?1.5V to ?16V 14-Pin TSSOP Emboss T/R (Alt: UPC844GR-9LG-E2-A/H) RoHS : Compliant | 0 | |||
| TLP293(V4-GRTR,E(T | Toshiba America Electronic Components | (Alt: TLP293(V4-GRTR,E(T) RoHS : Compliant | 0 | |||
| TLP184(GR-TPL,SE(T | Toshiba America Electronic Components | Optocoupler (Alt: TLP184(GR-TPL,SE(T) RoHS : Compliant | 0 | |||
| TLP785F(D4GRT7,F(C | Toshiba America Electronic Components | Optocoupler DC-IN 1-CH DC-OUT 4-Pin PDIP SMD (Alt: TLP785F(D4GRT7,F(C) RoHS : Compliant | 0 | |||
| 10127720-044GRLF | Amphenol Corporation | Connector Power Header 4 Position 3mm Right Angle Through Hole T/R (Alt: 10127720-044GRLF) RoHS : Compliant | 0 | |||
| TLP785F(D4-GRL,F(C | Toshiba America Electronic Components | (Alt: TLP785F(D4-GRL,F(C) RoHS : Compliant | 0 | |||
 Avnet Silica | QSB34GR | onsemi | Surface Mount Silicon Infrared PIN Photodiode ONSSPCISTNJZ8E4V (Alt: QSB34GR) RoHS : Compliant | 0 | ||
| MP3364GR-Z | Monolithic Power Systems | (Alt: MP3364GR-Z) RoHS : Compliant | 0 | |||
| MPM3684GRU | Monolithic Power Systems | (Alt: MPM3684GRU) RoHS : Compliant | 0 | |||
| MP26124GR-P | Monolithic Power Systems | (Alt: MP26124GR-P) RoHS : Compliant | 0 | |||
| XBP06V4E4GR-G | Torex Semiconductor LTD | (Alt: XBP06V4E4GR-G) RoHS : Compliant | 0 | |||
| MPQ9934GRE-AEC1-P | Monolithic Power Systems | Switching Voltage Regulators 45V 7A Low Iq (Alt: MPQ9934GRE-AEC1-P) RoHS : Compliant | 0 | |||
| MPQ3364GRE-AEC1-Z | Monolithic Power Systems | (Alt: MPQ3364GRE-AEC1-Z) RoHS : Compliant | 0 | |||
| MPQ4314GRE-AEC1-Z | Monolithic Power Systems | DCDC Switching Synchronous StepDown Regulator Adj 33V45Vin 0815V4275V out 4A WFQFN20 (Alt: MPQ4314GRE-AEC1-Z) RoHS : Compliant | 0 | |||
| MPQ9934GRE-AEC1-Z | Monolithic Power Systems | Switching Voltage Regulators 45V 7A Low Iq (Alt: MPQ9934GRE-AEC1-Z) RoHS : Compliant | 0 | |||
| UPC844GR-9LG-E1-A | Renesas Electronics Corporation | OP Amp Quad 85Vus 15V to 16V3V to 32V 14Pin TSSOP Emboss TR (Alt: UPC844GR-9LG-E1-A) RoHS : Compliant | 0 | |||
| IS31LT3954-GRLS4-TR | Lumissil Microsystems | A constant current PWM Dimmable switching converter that integrates an Nchannel MOSFET to operate (Alt: IS31LT3954-GRLS4-TR) RoHS : Compliant | 0 | |||
| PJESDA6V2-4G_ R2 _00001 | PanJit Semiconductor | (Alt: PJESDA6V2-4G_R2_00001) RoHS : Compliant | 0 | |||
| PJESDA6V2-4G _R1 _00001 | PanJit Semiconductor | (Alt: PJESDA6V2-4G_R1_00001) RoHS : Compliant | 0 | |||
| 2JF1224P-030MC137-C394GRST_CU013161 | 2J USA | 2JF1224P Black Adhesive Mount LTE 30cm MicroCoax 137mm SMBMaleRAGold Red Shrink Tube (Alt: SI321101961) RoHS : Compliant | 0 | |||
| 2JF1224P-050MC137B-C154GRST_CU022683 | 2J USA | 2JF1224P Black Adhesive Mount LTE 50cm MicroCoax 137mm Black (Alt: SI321100497) RoHS : Compliant | 0 | |||
 Chip-Germany GmbH | SMD LED LG A676-P1Q2-24 GRÜN SIDEVIEW | OSRAM GmbH | 3,730 | |||
 Component Electronics, Inc | UPC8104GR-E1 | NEC Electronics Group | IN STOCK SHIP TODAY | 4,800 | ||
| AVK-4-GREY | Klemsan Elektrik Elektronik Sanayi Ve Ticaret As | IN STOCK SHIP TODAY | 4,771 | |||
| SN74ALVCH162374GR | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,900 | ||
| PYK-4-GREY | Klemsan Elektrik Elektronik Sanayi Ve Ticaret As | IN STOCK SHIP TODAY | 1,000 | |||
| AVK-4-GREEN | Klemsan Elektrik Elektronik Sanayi Ve Ticaret As | IN STOCK SHIP TODAY | 300 | |||
| CB04-GREEN | Canare Electric Co Ltd | IN STOCK SHIP TODAY |
| 274 | ||
| 44GR1KLFT7 | TT electronics / BI Technologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 267 | ||
| PYK-4-GREEN | Klemsan Elektrik Elektronik Sanayi Ve Ticaret As | IN STOCK SHIP TODAY | 200 | |||
| YBK-4-GREY | Klemsan Elektrik Elektronik Sanayi Ve Ticaret As | IN STOCK SHIP TODAY | 100 | |||
| NPP/YBK-4-GREY | Klemsan Elektrik Elektronik Sanayi Ve Ticaret As | IN STOCK SHIP TODAY | 100 | |||
| CB24-GREEN | Canare Electric Co Ltd | IN STOCK SHIP TODAY |
| 89 | ||
| CB04-GREY | Canare Electric Co Ltd | IN STOCK SHIP TODAY |
| 63 | ||
| RLR20C474GRB14 | CGW | IN STOCK SHIP TODAY | 34 | |||
| SRPT659544/GRAY | APEM Inc | IN STOCK SHIP TODAY |
| 13 | ||
| ASK-4-GREY | Klemsan Elektrik Elektronik Sanayi Ve Ticaret As | IN STOCK SHIP TODAY | 3 | |||
 DB Roberts | HHC1/2-13X2-3/4-GR8-ZY | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 2,623 | |
| HHC1/4-20X4-GR8-ZY | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 1,884 | ||
| HHC1/4-20X1-3/4-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 1,240 | ||
| HHC3/8-16X1-1/4-GR5-STL | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 1,074 | ||
| HHC1/4-28X3/4-GR8-ZY | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 900 | ||
| HHC1/2-13X2-1/4-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 662 | ||
| HHC1/2-13X2-1/4-GR8-STL | HEX HEAD CAP SCREW | HEX HEAD CAP SCREW GR8 STEEL |
| 200 | ||
| HHC7/16-20X2-1/4-GR5-STL | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 190 | ||
| HHC5/16-18X2-3/4-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 175 | ||
| HXN5/16-24-GR5-ZI | HEX NUT | Hex Nut |
| 125 | ||
| HHC5/8-11X1-3/4-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 88 | ||
| HHC3/4-10X1-3/4-GR5-ZI | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 77 | ||
| HHC5/8-18X3-3/4-GR8 | HEX HEAD CAP SCREW | Hex Head Cap Screw |
| 30 | ||
| ROD1032X3/4-GR8-STL | THREADED/UNTHREADED |
| 16 | |||
| 29W014GR | Essentra Components | WING PRESS LOCK THUMB SCREW KN | 0 | |||
 EBV Elektronik | QSB34GR | onsemi | Surface Mount Silicon Infrared PIN Photodiode ONSSPCISTNJZ8E4V (Alt: QSB34GR) RoHS : Compliant | 245,000 | ||
| BZT52B24-G RHG | Taiwan Semiconductor | Diode Zener Single 24V 2 041W 2Pin SOD123 Plastic TR (Alt: BZT52B24-G RHG) RoHS : Compliant | 168,000 | |||
| TLP785(D4-GR,F(C | Toshiba America Electronic Components | Optocoupler DCIN 1CH DCOUT 4Pin PDIP SMD (Alt: TLP785(D4-GR,F(C) RoHS : Compliant | 1,600 | |||
| QRE1114GR | onsemi | Photointerrupter Reflective Single 940nm 4Pin SMD TR (Alt: QRE1114GR) RoHS : Compliant | 0 | |||
| R7600 4G ROUTER | SIMCom | R7600 4G Router (Alt: R7600 4G ROUTER) RoHS : Compliant | 0 | |||
| BZT52B2V4-G RHG | Taiwan Semiconductor | (Alt: BZT52B2V4-G RHG) RoHS : Compliant | 0 | |||
| TLP385(D4GR-TR,E(T | Toshiba America Electronic Components | Optocoupler DCIN 1CH DC 4Pin SO6L TR (Alt: TLP385(D4GR-TR,E(T) RoHS : Compliant | 0 | |||
| TLP385(D4GR-TL,E(T | Toshiba America Electronic Components | (Alt: TLP385(D4GR-TL,E(T) RoHS : Compliant | 0 | |||
| IS31LT3954-GRLS4-TR | Lumissil Microsystems | A constant current PWM Dimmable switching converter that integrates an Nchannel MOSFET to operate (Alt: IS31LT3954-GRLS4-TR) RoHS : Compliant | 0 | |||
| TLP185(V4GRTR,SE(T | Toshiba America Electronic Components | Optocoupler 1CH Open Collector 3750Vrms 4Pin SO6 Emboss TR (Alt: TLP185(V4GRTR,SE(T) RoHS : Compliant | 0 | |||
| TLP785(D4-GRH,F(C | Toshiba America Electronic Components | Optocoupler 1CH Open CollectorOUT 5000Vrms 4Pin PDIP Tube (Alt: TLP785(D4-GRH,F(C) RoHS : Compliant | 0 | |||
| TLP785(D4GR-T6,F(C | Toshiba America Electronic Components | Optocoupler DCIN 1CH Transistor DCOUT 4Pin PDIP (Alt: TLP785(D4GR-T6,F(C) RoHS : Compliant | 0 | |||
| TLP620MF(D4GRT4E(O | Toshiba America Electronic Components | Photocouplers Infrared LED Photo Transistor (Alt: TLP620MF(D4GRT4E(O) RoHS : Compliant | 0 | |||
| TLP183(V4-GRTL,E(T | Toshiba America Electronic Components | (Alt: TLP183(V4-GRTL,E(T) RoHS : Compliant | 0 | |||
| TLP293(V4-GRTL,E(T | Toshiba America Electronic Components | (Alt: TLP293(V4-GRTL,E(T) RoHS : Compliant | 0 | |||
 FDH Electronics | B8 1/4 GRAY 4FT | SUMITOMO ELECTRIC Industries Ltd | Cable Protect | 3,845 | ||
| ALPHA 5854-GRN | Alpha Wire | Wire and Cable | 1,800 | |||
| ALPHA 5854-GRY | Alpha Wire | Wire and Cable | 500 | |||
| TT180M-5W-544-GRP A | Spectrum Control | Certs & Documen | 100 | |||
| TT180M-5W-544-GRP B | Spectrum Control | Certs & Documen | 1 | |||
| 3500F824GR1 | Aptiv PLC | Connector Acc |
| 1 | ||
| IM44GR | TE Connectivity | Relays RoHS : Compliant | 0 | |||
| AML26GBF8CA04GR | Honeywell Sensing and Control | Switches RoHS : Compliant | 0 | |||
AML25GBF2CA04GR | Honeywell Sensing and Control | Switches RoHS : Compliant | 0 | |||
| SM3-12 1/4 GREEN SPL | SUMITOMO ELECTRIC Industries Ltd | Identification | 0 | |||
| AML25GBF2AA04GR | Honeywell Sensing and Control | Switches RoHS : Compliant | 0 | |||
| IM04GR | TE Connectivity | Relays RoHS : Compliant |
| 0 | ||
| AML26GBC2AA04GR | Honeywell Sensing and Control | Switches RoHS : Compliant | 0 | |||
 Flip Electronics | QSB34GR-SN00349 | onsemi | Stock, Ship Today |
| 3,000 | |
 Maritex | 118-B-44GRK | Greenconn Corp | Full shrouded header for PCB; pitch 2.00mm; 44-contacts; THT; male; side entry |
| 211 | |
| P1614-GR-LN | BEISIT | Cabel gland PG16; nylon; PG16 10-14mm; grey; Flat O-ring; with lock nut |
| 100 | ||
| 118-B-34GRK | Greenconn Corp | Full shrouded header for PCB; pitch 2.00mm; 34-contacts; THT; male; side entry |
| 29 | ||
| 119-14GRK | Xinya Electronics Co Ltd | Full shrouded header for PCB; pitch 2.54mm; 14-contacts; THT; male; side entry |
| 1 | ||
 Master Electronics | 9L28024-GRY-H100 | Belden Inc | RoHS : Compliant |
| 7 | |
| FIT2211/4-GREEN-250 | Alpha Wire | FIT-221 1/4 - Green - 250ft RoHS : Compliant |
| 2 | ||
| 5854-GREEN-1000 | Alpha Wire | Hook-up Wire 24AWG 1.14mm Silver Plated Copper- Green - 600V - 304.8m (1000ft)/Spool RoHS : Compliant |
| 1 | ||
| 6714-GREEN-100 | Alpha Wire | Hook Up Wire - Stranded - 20 (10/30) AWG - 600V - mPPE - Green - 100 ft - Tinned Copper RoHS : Compliant |
| 1 | ||
| AB-844GR | Thomas & Betts | Closure Strip - Length 10 Feet - Green Urethane Powder Coated Steel. RoHS : Compliant |
| 0 | ||
| MSTBW-2-5/-4-G-RD | Phoenix Contact | MSTBW 2 5/ 4-G RD RoHS : Compliant |
| 0 | ||
| LW6J-3-4GRB | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| LW6J-31C74GRG-501 | IDEC Corporation | KEY SELECTOR SWITCH ILL RoHS : Compliant |
| 0 | ||
| LW6MJ-31C24GRB | IDEC Corporation | KEY SELECTOR SWITCH ILL RoHS : Compliant |
| 0 | ||
| IDSD-07-D-02.00-T-P14-G-RW | Samtec Inc | RoHS : Compliant |
| 0 | ||
| APH-0314-G-R | Samtec Inc | LOW PROFILE ADAPTOR RoHS : Compliant |
| 0 | ||
| APH-1524-G-R | Samtec Inc | LOW PROFILE ADAPTOR RoHS : Compliant |
| 0 | ||
| HLT-1314-G-R | Samtec Inc | .100 Screw Machine Terminal Array RoHS : Compliant |
| 0 | ||
| APH-0604-G-R | Samtec Inc | LOW PROFILE ADAPTOR RoHS : Compliant |
| 0 | ||
| APH-1814-G-R | Samtec Inc | LOW PROFILE ADAPTOR RoHS : Compliant |
| 0 | ||
 Neutron USA | C6ASPAT4GR | StarTech | 4FT CAT6A GRAY ETHERNET CABLE STP |
| 345 | |
| N6PATCH4GR | StarTech | 4FT CAT6 GRAY SNAGLESS ETHERNET CABLE UTP |
| 123 | ||
| 29-104 GRN | Grayhill Inc | Binding Post 20 A 120 VDC Grn (Cap) 25&frasl 64 in. 1.44 in. 29 Series |
| 50 | ||
| 6714 GR005 | Alpha Wire | Hook-up Wire 20 AWG 10/30 600V mPPE 100 ft Spool Green |
| 50 | ||
| AML25GBF2CA04GR | Honeywell Sensing and Control | Rocker Switches N.O./N.C. DPDT ROCKER SWITCH RoHS : Compliant |
| 50 | ||
| N6PATCH14GR | StarTech | 14FT CAT6 GRAY SNAGLESS ETHERNET CABLE UTP |
| 50 | ||
| AP-CF004GRANS-ETNRC | Apacer Technology Inc | Memory Cards Industrial CF6 SLC Non-Removable Ext Temp 4GB RoHS : Compliant |
| 50 | ||
| K80L4GRYB1PQ | Banner Engineering Corp | 4-Color Segmented Indicator, LED B/G/R/Y, In: PNP, QDM12, 77883 |
| 3 | ||
| AFL3-12A-AL-J2/P/PC/4G-R10 | iEi Integration Corporation | 12.1 inch 500 1024x768 Panel PC, Celeron J3455 (10W), POE option, 4GB DDR3L , 802.11a/b/g/n/ac WiFi, PCAP touch, 2M camera, microphone,------ BAREBONE; NO OS; NO Storage |
| 1 | ||
| PPC-F12B-BT-J1/4G/R-R14 | iEi Integration Corporation | 12.1" 600 cd/m2 XGA Panel PC with IntelR CeleronR Processor J1900, TDP 10W, 4GB RAM*1, black color,Powder paint, 9-36V DC input, resistive touch window with AG coating, R14 |
| 1 | ||
| AP-CF004GRHNS-NRK | Apacer Technology Inc | Memory Cards Industrial CS710-CF SLC Non-Removable 004GB 24nm |
| 0 | ||
AP-CF064GRANS-ETNRC | Apacer Technology Inc | Memory Cards CF6 64GB ET RoHS : Compliant |
| 0 | ||
| K80L4GRYB1PQ, 77883 | Banner Engineering Corp | Banner Engineering K80L4GRYB1PQ Panel Mount Indicator LED B/G/R/Y Segmented PNP 5 Pin PNP K80 Series |
| 0 | ||
AP-CF064GRANS-NRC | Apacer Technology Inc | Memory Cards CF6 64GB RoHS : Compliant |
| 0 | ||
| APHA004GR23CG-CM | Apacer Technology Inc | USB Flash Drives Industrial USB AH322 4GB MLC RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C8874/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GR, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GR is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GR can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax. | 416 | ||
| PE3C3244/GR/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm. N Female to TNC Male Cable Using PE-P300LL Coax with HeatShrink., Pasternack’s PE3C3244/GR/HS type N female to TNC male RF cable assembly using PE-P300LL coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N female to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our type N to TNC cable assembly has a female gender on end 1 and a male on end 2. PE3C3244/GR/HS can also be known as a type N jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3244/GR/HS RF cable has an FEP jacket of 0.300-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 160 degrees C. The flexible RF cable has a between series connection. Our type N female to TNC male cable has a maximum VSWR of 1.346:1. This PE3C3244/GR/HS type N jack to TNC plug cable assembly is built with PE-P300LL, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a clamp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C3244/GR/HS can also be used in the other direction and will be a TNC male to type N female cable assembly if the opposite connectivity is required. This type N jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC RF cable assembly as per your requirements. | 0 | |||
| PE3C8744/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable using 75 Ohm 4694R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/GR, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/GR is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable using 75 Ohm 4694R-GR coax. | 0 | |||
| PE344/GR/HS | Pasternack Enterprises | 0 | ||||
| PE3C8814/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/GR, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/GR is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/GR can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable using 75 Ohm 1694A-GR coax. | 0 | |||
| PE3C8744/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 12 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/GR-12, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/GR-12 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 12 inch length using 75 Ohm 4694R-GR coax. |
| 0 | ||
| PE3C8744/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/GR-120, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/GR-120 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-GR coax. |
| 0 | ||
| PE3C8744/GR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 300 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/GR-300, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/GR-300 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 300 inch length using 75 Ohm 4694R-GR coax. |
| 0 | ||
| PE3C8744/GR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 36 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 36 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 36 inch length using 75 Ohm 4694R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/GR-36, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/GR-36 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 36 inch length using 75 Ohm 4694R-GR coax. |
| 0 | ||
| PE3C8744/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-GR, RF Cable Type: Belden 4694R-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 72 Inch Length Using 75 Ohm 4694R-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 72 inch length using 75 Ohm 4694R-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 72 inch length using 75 Ohm 4694R-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/GR-72, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/GR-72 is built with belden 4694R-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 72 inch length using 75 Ohm 4694R-GR coax. |
| 0 | ||
| PE3C8814/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/GR-12, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/GR-12 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/GR-12 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 12 inch length using 75 Ohm 1694A-GR coax. |
| 0 | ||
| PE3C8814/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/GR-120, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/GR-120 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/GR-120 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-GR coax. |
| 0 | ||
| PE3C8814/GR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/GR-300, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/GR-300 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/GR-300 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 300 inch length using 75 Ohm 1694A-GR coax. |
| 0 | ||
| PE3C8814/GR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/GR-36, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/GR-36 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/GR-36 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 36 inch length using 75 Ohm 1694A-GR coax. |
| 0 | ||
| PE3C8814/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-GR, RF Cable Type: Belden 1694A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/GR-72, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/GR-72 is built with Belden 1694A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/GR-72 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-GR coax. |
| 0 | ||
 Vyrian | TLP781(D4-GR,F) | Toshiba America Electronic Components | Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant | 17,257 | ||
| TLP781F(D4GRL-T7,F) | Toshiba America Electronic Components | Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant | 16,302 | |||
| TLP184(GR,SE | Toshiba America Electronic Components | AC Input-Transistor Output Optocoupler, 1-Element, 3750V Isolation RoHS : Compliant | 8,915 | |||
74ALVCH162334GRE4 | Texas Instruments | Bus Driver, ALVC/VCX/A Series, 1-Func, 16-Bit, True Output, CMOS, PDSO48 RoHS : Compliant | 7,277 | |||
NAND04GR3B2CN1E | Micron Technology Inc | Flash, 512MX8, 35ns, PDSO48 RoHS : Compliant | 6,671 | |||
| NAND04GR4B2AN1F | Micron Technology Inc | Flash, 256MX16, 35ns, PDSO48 RoHS : Compliant | 6,627 | |||
| NAND04GR3B2DZL1E | Micron Technology Inc | Flash, 512KX8, 30ns, PBGA52 RoHS : Compliant | 5,567 | |||
| NAND04GR3B2CN1F | Micron Technology Inc | Flash, 512MX8, 35ns, PDSO48 RoHS : Compliant | 5,421 | |||
| NAND04GR4B2CN6T | Micron Technology Inc | Flash, 256MX16, 35ns, PDSO48 | 5,375 | |||
| NAND04GR4B2CN1E | Micron Technology Inc | Flash, 256MX16, 35ns, PDSO48 RoHS : Compliant | 4,929 | |||
| NAND04GR4B2CN6E | Micron Technology Inc | Flash, 256MX16, 35ns, PDSO48 RoHS : Compliant | 4,916 | |||
| NAND04GR3B2BN6T | Micron Technology Inc | Flash, 512MX8, 35ns, PDSO48 | 4,859 | |||
| KVR667D2K2SO/4GR | Kingston Technology Company | 4,456 | ||||
| KVR1333D3/4GR | Kingston Technology Company | 4,233 | ||||
| HMA84GR7CJR4N-VK | SK Hynix Inc | DDR DRAM Module, 4GX72, CMOS RoHS : Compliant | 331 | |||
 Waytek, Inc. | AT04-2P-D1N4GRY | Amphenol Sine Systems | AT Series 2 Position Pin Receptacle 1N4004 Diode w/ Nickel Plated Pins, Endcap,Gry |
| 0 | |
 Win Source Electronics | 2SC3324-GR | Toshiba America Electronic Components | Audio Frequency Low Noise Amplifier Applications |
| 185,600 | |
| 2SC3324GRTE85LF | Toshiba America Electronic Components | TRANS NPN 120V 0.1A S-MINI |
| 120,000 | ||
| STC4054GR | STMicroelectronics | IC BATT CHRGR 800MA TSOT23-5 RoHS : Compliant |
| 60,000 | ||
TLP521-4GR | Isocom Components | OPTOISO 5.3KV 4CH TRANS 16DIP / Optoisolator Transistor Output 5300Vrms 4 Channel 16-DIP RoHS : Compliant |
| 28,165 | ||
| MPQ3364GR-AEC1-P | Monolithic Power Systems | IC LED DRVR CTRL PWM 150MA 24QFN |
| 22,870 | ||
| MPQ3364GR-AEC1-Z | Monolithic Power Systems | IC LED DRVR CTRL PWM 150MA 24QFN RoHS : Compliant |
| 22,730 | ||
| TLP620-4GR | Toshiba America Electronic Components | Optoisolator Transistor Output 5000Vrms 4 Channel 16-DIP |
| 11,080 | ||
| MP26124GR-Z | Monolithic Power Systems | IC BATT CHG LI-ION 4CELL 16QFN RoHS : Compliant |
| 5,000 | ||
| SN74ALVTH16244GR | Texas Instruments | Buffer/Line Driver 16-CH Non-Inverting 3-ST BiCMOS 48-Pin TSSOP T/R / IC BUFF/DVR TRI-ST 16BIT 48TSSOP RoHS : Compliant |
| 2,000 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Mexican ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
British
New Zealand