5047L-R Price, Reseller, Stock

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8A/U, RF Cable Type: RG8, RF Cable Impedance: 50 Ohm, Length: 72 inches. TNC Male to BNC Male Cable 72 Inch Length Using RG8 Coax., Radio frequency assembly TNC male to BNC male cable 72 inch length using RG8 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to BNC male cable 72 inch length using RG8 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and BNC cable connection on the other. Our TNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to BNC cable is a male to male coax assembly, PE34504-72, can also be known as a TNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to BNC plug cable assembly PE34504-72 is built with RG8 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this TNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34504-72 can also be used in the other direction and will be BNC male to TNC male cable assembly if the opposite connectivity is required. TNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to BNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to BNC male cable 72 inch length using RG8 coax.

1 : $171.99
25 : $163.39
50 : $154.79
100 : $147.91

335

PE3504-72

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm, Length: 72 inches. TNC Male to TNC Male Cable 72 Inch Length Using 53 Ohm RG55 Coax., Radio frequency assembly TNC male to TNC male cable 72 inch length using 53 Ohm RG55 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male cable 72 inch length using 53 Ohm RG55 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE3504-72, can also be known as a TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3504-72 is built with RG55 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male cable 72 inch length using 53 Ohm RG55 coax.

1 : $60.99
25 : $57.94
50 : $54.89
100 : $52.45

122

PE45047

Pasternack Enterprises

Key Specifications, Polarity: Standard, Connector Series: N, Connector Gender: Female, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: Bulkhead, Minimum Frequency: DC, Maximum Frequency: 3 GHz, Interface Type 1: LMR-200, Interface Type 2: PE-C200. N Female Bulkhead Mount Connector Crimp/Solder Attachment for LMR-200, PE-C200, IP67 Rated. PE45047 type N female bulkhead coaxial connector has an interface type of LMR-200, PE-C200 and a 50 Ohm impedance. Pasternack type N female bulkhead connector uses shield/contact crimp/solder as an attachment method. Our female type N coaxial connector provides a minimum frequency of DC and a maximum frequency of 3 GHz. The Pasternack N type female bulkhead coaxial connector has a PTFE dielectric type and a VSWR of 1.2. Our PE45047 N type connector uses copper contact and a tri-metal plating material. This type N female bulkhead coaxial RF connector is RoHS and REACH compliant. This Pasternack female N type bulkhead connector will ship the same day as purchased. Our bulkhead type N female connector is part of over 40,000 RF, microwave and millimeter wave components in stock for worldwide shipment. We also build custom type N connector cable assemblies that will ship the same day as well, *LMR™ is a Trademark of Times Microwave.

1 : $45.79
25 : $43.96
50 : $42.58
100 : $41.67

PE3FCA504-7M

Pasternack Enterprises

Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Connector 1 Series: FC, Connector 1 Polish Type: UPC, Connector 2 Series: FC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex FC UPC, NK to FC UPC, NK, SM OS2, 2.0mm Riser, Yellow-7M. Pasternack’s PE3FCA504-7M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 7-meter long duplex cable assembly is equipped with FC/UPC narrow key to FC/UPC narrow key connectors. Our yellow fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, fiber optic test and measurement, medical and biomedical, military and defense, industrial automation and sensing and scientific research and high-precision optical systems. With the flexibility of custom lengths, the PE3FCA504-7M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA504-7M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of dual FC/UPC to dual FC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements.

1 : $36.69
5 : $35.22
10 : $33.75
25 : $32.29

PE15A5047F

Pasternack Enterprises

Key Specifications, Frequency, Min: 2 GHz, Frequency, Max: 6 GHz, Gain, Min: 40 dB, 1dB Compression Point, Min: 37 dBm, 3rd Intercept Point, Typ: 44 dB, Voltage, DC Typ: 12 Volts. 5 Watt P1dB, 2 GHz to 6 GHz, High Power Amplifier with Heatsink, SMA, 40 dB Gain, 44 dBm IP3. RF solid state power amplifier (SSPA) PE15A5047F from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a high power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 5 Watts. Pasternack solid state power amplifier part number PE15A5047F SMA high power amp has a 40 dB minimum gain. The high power high gain amp is rated with a P1dB of 37 dBm. Our radio frequency high power solid state amplifier is constructed for minimum frequency of 2 GHz and a maximum frequency of 6 GHz. Additional radio frequency specs on this high frequency high gain high power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our high power high gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This high power 5 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs.

1 : $12,400.0
5 : $11,904.0
10 : $11,408.0
25 : $10,912.0

PE3C5047

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to SMA Female Cable Using PE-SR405FLJ Coax., Radio frequency assembly snap-on BMA jack to SMA female cable using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on BMA jack to SMA female cable using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA cable connection on one end and SMA cable connection on the other. Our BMA to SMA cable assemblies have a jack gender on end 1 and female on end 2. This BMA to SMA cable is a jack to female coax assembly, PE3C5047, can also be known as a BMA female to SMA jack cable assembly and will be shipped same-day as it is purchased. BMA female to SMA jack cable assembly PE3C5047 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA jack to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5047 can also be used in the other direction and will be SMA female to BMA jack cable assembly if the opposite connectivity is required. BMA female to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on BMA jack to SMA female cable using PE-SR405FLJ coax.

PE3W05047/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMA Female to SMB Plug Cable Using RG316 Coax with HeatShrink. PE3W05047/HS is a SMA female to SMB plug cable using RG316 coax. This Pasternack SMA female to SMB plug cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMB for connector 2. Our female SMA to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W05047/HS SMA female to SMB plug cable assembly is constructed with RG316 coax.

PE3W05047/WH/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMB Positive Snap, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: Mini SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm SMB Positive Snap Plug to 75 Ohm Mini SMB Plug Right Angle Cable Using 75 Ohm RG187 Coax with HeatShrink, LF Solder., Pasternack’s PE3W05047/WH/HS SMB positive snap plug to right angle mini SMB plug RF cable assembly using RG187 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB positive snap plug to mini SMB plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMB positive snap to mini SMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMB positive snap cable connection on one end and a right angle mini SMB cable connection on the other. Our SMB positive snap to mini SMB cable assembly has a plug gender on end 1 and a plug on end 2. PE3W05047/WH/HS can also be known as a SMB positive snap male to right angle mini SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. Our PE3W05047/WH/HS RF cable has a ptfe jacket of 0.102-inch diameter. The flexible RF cable has a between series connection. This PE3W05047/WH/HS SMB positive snap male to mini SMB male cable assembly is built with RG187, which is a flexible coax type. The Pasternack flexible SMB positive snap cable assembly is manufactured with SMB positive snap to right angle mini SMB cable connectors, has a 75 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05047/WH/HS can also be used in the other direction and will be a right angle mini SMB plug to SMB positive snap plug cable assembly if the opposite connectivity is required. This SMB positive snap male to mini SMB right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMB positive snap to mini SMB cable assembly for quick shipment worldwide. Variations of SMB positive snap and mini SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB positive snap to mini SMB RF cable assembly as per your requirements.

PE3W25047

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. Mini SMP Female to SMP Female Right Angle Cable Using PE-P086HF Coax. PE3W25047 is a Mini SMP female to SMP female right angle cable using PE-P086HF coax. This Pasternack Mini SMP female to SMP female right angle cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMP for connector 2. Mini SMP to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25047 Mini SMP female to SMP female right angle cable assembly is constructed with PE-P086HF coax.

PE3W15047/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Beige FAKRA Jack to SMA Female Cable Using LMR-100 Coax with HeatShrink. PE3W15047/HS is a FAKRA jack to SMA female cable using LMR-100A coax. This Pasternack FAKRA jack to SMA female cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm SMA for connector 2. Our jack FAKRA to female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15047/HS FAKRA jack to SMA female cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W13504-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. TNC Male to TNC Male Right Angle Low Loss Cable 72 Inch Length Using LMR-200 Coax., Radio frequency assembly TNC male to TNC male right angle low loss cable 72 inch length using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male right angle low loss cable 72 inch length using LMR-200 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W13504-72 can also be known as a low loss TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W13504-72 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13504-72 can also be used in the other direction and will be right angle TNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male right angle low loss cable 72 inch length using LMR-200 coax.

1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59

PE3W05047

Pasternack Enterprises

Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. SMB Plug to SMA Female Cable Using RG316 Coax., Radio frequency assembly SMB plug to SMA female cable using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB plug to SMA female cable using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and SMA cable connection on the other. Our SMB to SMA cable assemblies have a plug gender on end 1 and female on end 2. This SMB to SMA cable is a plug to female coax assembly, PE3W05047, can also be known as a SMB male to SMA jack cable assembly and will be shipped same-day as it is purchased. SMB male to SMA jack cable assembly PE3W05047 is built with RG316 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMB plug to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05047 can also be used in the other direction and will be SMA female to SMB plug cable assembly if the opposite connectivity is required. SMB male to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMA female cable using RG316 coax.

PE3W25047LF

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. Mini SMP Female to SMP Female Right Angle Cable Using PE-P086HF Coax, LF Solder. PE3W25047LF is a Mini SMP female to SMP female right angle cable using PE-P086HF coax. This Pasternack Mini SMP female to SMP female right angle cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMP for connector 2. Mini SMP to SMP right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP to female SMP right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W25047LF Mini SMP female to SMP female right angle cable assembly is constructed with PE-P086HF coax.

Venkel Ltd.

C1210Y5V250-475MNE

VENKEL LTD

Chip Capacitor;1210;Y5V;25V;4.7uF;�20%
RoHS : Compliant

192,608

C0603Z5U250-473ZNP

VENKEL LTD

Chip Capacitor;0603;Z5U;25V;0.047uF;+80-20%
RoHS : Compliant

87,250

C0402X7R250-471KNP

VENKEL LTD

Chip Capacitor;0402;X7R;25V;470pF;�10%
RoHS : Compliant

86,000

C0805Y5V250-474MNE

VENKEL LTD

Chip Capacitor;0805;Y5V;25V;0.47uF;�20%
RoHS : Compliant

24,000

FTC0805X7R250-475KNE

VENKEL LTD

Flex Termination Ceramic Capacitor;0805;X7R;25V;4.7uF;�10%
RoHS : Compliant

6,000

C0603X7R250-471KNE

VENKEL LTD

Chip Capacitor;0603;X7R;25V;470pF;�10%
RoHS : Compliant

5,332

C0201C0G250-470GNP

VENKEL LTD

Chip Capacitor;0201;C0G;25V;47pF;�2%
RoHS : Compliant

C0603X7R250-472KNP

VENKEL LTD

Chip Capacitor;0603;X7R;25V;4700pF;�10%
RoHS : Compliant

AGC0201X7R250-472KNP

VENKEL LTD

Auto Grade Capacitor;0201;X7R;25V;4700pF;�10%
RoHS : Compliant

C0402C0G250-470GNP

VENKEL LTD

Chip Capacitor;0402;C0G;25V;47pF;�2%
RoHS : Compliant

C0603Z5U250-473MPP

VENKEL LTD

Chip Capacitor;0603;Z5U;25V;0.047uF;�20%;Pd
RoHS : Compliant

C0805C0G250-471KNP

VENKEL LTD

Chip Capacitor;0805;C0G;25V;470pF;�10%
RoHS : Compliant

C0805X5R250-475MNE

VENKEL LTD

Chip Capacitor;0805;X5R;25V;4.7uF;�20%
RoHS : Compliant

C1206Y5V250-474ZNP

VENKEL LTD

Chip Capacitor;1206;Y5V;25V;0.47uF;+80-20%
RoHS : Compliant

C1206Z5U250-474MNE

VENKEL LTD

Chip Capacitor;1206;Z5U;25V;0.47uF;�20%
RoHS : Compliant

Vyrian

950472-5002-AR

3m Electronic Products Division

Board Connector, 72 Contact(s), 2 Row(s), Female, Right Angle, Solder Terminal, Socket

17,668

750-478

WAGO Innovative Connections

Interface Modules
RoHS : Compliant

15,014

HSC150470RJ

TE Connectivity

Fixed Resistor, Wire Wound, 150W, 470ohm, 2500V, 5% +/-Tol, 30ppm/Cel, Chassis Mount
RoHS : Compliant

13,355

5650479-5

TE Connectivity

Board Euro Connector, 48 Contact(s), 3 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Hole .112-.124, Gray Insulator, Plug
RoHS : Compliant

10,779

1850479

Phoenix Contact

Strip Terminal Block, 8A, 2.5mm2, 1 Row(s), 1 Deck(s)
RoHS : Compliant

9,572

5750477-1

TE Connectivity

Circular DIN Connector, 5 Contact(s), Female, Board Mount, Solder Terminal, Locking, Receptacle
RoHS : Compliant

9,015

2N5047

Texas Instruments

Small Signal Field-Effect Transistor, 2-Element, N-Channel, Silicon, Junction FET, TO-71
RoHS : Not Compliant

8,705

PT5047LT

Texas Instruments

Switching Regulator, 1.5A, 950kHz Switching Freq-Max, PDSO3
RoHS : Not Compliant

8,123

PT5047C

Texas Instruments

Switching Regulator, Voltage-mode, 0.6A, 950kHz Switching Freq-Max, Hybrid
RoHS : Compliant

7,359

ADRF5047

Analog Devices Inc

Diversity Switch, 0.009MHz Min, 44000MHz Max
RoHS : Compliant

6,136

MAL215050472E3

Vishay Intertechnologies

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 4700uF, Through Hole Mount
RoHS : Compliant

5,258

TJT15047RJ

TE Connectivity

Fixed Resistor, Wire Wound, 150W, 47ohm, 5% +/-Tol, 260ppm/Cel, Chassis Mount
RoHS : Compliant

3,977

CM8071504799712S-RLGG

Intel Corporation

1,288

MAL209750478E6

Vishay Intertechnologies

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 35V, 20% +Tol, 20% -Tol, 4.7uF, Through Hole Mount
RoHS : Compliant

685

1SNA645047R0000

ABB Low Voltage Products and Systems

Transistor Output Optocoupler, 1-Element

411

Win Source Electronics

5025850470

Molex

CONN RCPT 4POS 0.059 TIN SMD R/A

1,245 : $0.2417
930 : $0.2696
720 : $0.2789
525 : $0.2882
340 : $0.2975
140 : $0.3625

42,000

AS5047D-ATSM

Amphenol Spectra-Strip

ROTARY ENCODER MAGNETIC PROG

93 : $3.25
69 : $3.625
54 : $3.75
39 : $3.875
25 : $4.0
11 : $4.875

10,000

AS5047P-ATSM

Amphenol Spectra-Strip

ROTARY ENCODER MAGNETIC PROG / 14-bit On-Axis Magnetic Rotary Position Sensor with 12-Bit Decimal

81 : $3.7273
65 : $3.8788
50 : $4.0304
35 : $4.3334
23 : $4.4849
11 : $4.7879

9,350

AS5047P-ATST

OSRAM Opto Semiconductors

ROTARY ENCODER MAGNETIC PROG

81 : $3.7273
65 : $3.8788
50 : $4.0304
35 : $4.3334
23 : $4.4849
11 : $4.7879

9,240

RT5047AGSP

Richtek Technology Corp

IC REG CONV LNB 1OUT 8SOP
RoHS : Compliant

620 : $0.5433
465 : $0.606
360 : $0.627
260 : $0.6478
170 : $0.6688
70 : $0.815

5,000

5047L-R Reseller

Enlace URL