50480800BCNUNNFZCWC Price, Reseller, Stock

Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPO-375, RF Cable Type: SPO-375, RF Cable Impedance: 50 Ohm, Length: 48 inches. Outdoor Rated 7/16 DIN Female to 7/16 DIN Female Low PIM Cable 48 Inch Length Using SPO-375 Coax Using Times Microwave Parts., Radio frequency assembly outdoor rated 7/16 DIN female to 7/16 DIN female low PIM cable 48 inch length using SPO-375 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Outdoor rated 7/16 DIN female to 7/16 DIN female low PIM cable 48 inch length using SPO-375 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP375-716F-LP 7/16 DIN cable connection on one end and TC-SPP375-716F-LP 7/16 DIN cable connection on the other. Our low PIM TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable assemblies have a female gender on end 1 and female on end 2. This TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable is a female to female coax assembly, PE3C6504-48, can also be known as a low PIM TC-SPP375-716F-LP 7/16 DIN jack to TC-SPP375-716F-LP 7/16 DIN jack cable assembly and will be shipped same-day as it is purchased. TC-SPP375-716F-LP 7/16 DIN jack to TC-SPP375-716F-LP 7/16 DIN jack cable assembly PE3C6504-48 is built with SPO-375 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP375-716F-LP 7/16 DIN cable assembly is manufactured with TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency low PIM TC-SPP375-716F-LP 7/16 DIN female to TC-SPP375-716F-LP 7/16 DIN female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPP375-716F-LP 7/16 DIN jack to TC-SPP375-716F-LP 7/16 DIN jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP375-716F-LP 7/16 DIN to TC-SPP375-716F-LP 7/16 DIN cable assembly for quick shipment worldwide. Variations of TC-SPP375-716F-LP 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this outdoor rated 7/16 DIN female to 7/16 DIN female low PIM cable 48 inch length using SPO-375 coax using Times Microwave parts.

1 : $134.99
25 : $128.24
50 : $121.49
100 : $116.09

PE3C5044

Pasternack Enterprises

Key Specifications, Connector Series 1: FME, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. FME Plug to N Female Cable Using RG316 Coax., Radio frequency assembly FME plug to N female cable using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME plug to N female cable using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and N type cable connection on the other. Our FME to type N cable assemblies have a plug gender on end 1 and female on end 2. This FME to type N cable is a plug to female coax assembly, PE3C5044, can also be known as a FME male to N type jack cable assembly and will be shipped same-day as it is purchased. FME male to type N jack cable assembly PE3C5044 is built with RG316 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME plug to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5044 can also be used in the other direction and will be N type female to FME plug cable assembly if the opposite connectivity is required. FME male to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to N type cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME plug to N female cable using RG316 coax.

PE3C5046/HS

Pasternack Enterprises

PE3W05042/BK/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-1/2FAC, RF Cable Type: 1/2" Flexible, RF Cable Impedance: 50 Ohm. N Female to 7/16 DIN Male Cable Using 1/2 inch Flexible Coax with HeatShrink., Pasternack’s PE3W05042/BK/HS type N female to 7/16 DIN male RF cable assembly using 1/2" flexible coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The type N female to 7/16 DIN male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N cable connection on one end and a 7/16 DIN cable connection on the other. Our type N to 7/16 DIN cable assembly has a female gender on end 1 and a male on end 2. PE3W05042/BK/HS can also be known as a type N jack to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly has copper clad aluminum as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4.72-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05042/BK/HS RF cable has a PE jacket of 0.629-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The corrugated RF cable has a between series connection. This cable assembly has a typical propagation velocity of 88% and a minimum RF shielding of 120 dB. Our type N female to 7/16 DIN male cable has a maximum VSWR of 1.21:1. This PE3W05042/BK/HS type N jack to 7/16 DIN plug cable assembly is built with 1/2" flexible, which is a corrugated coax type. The Pasternack corrugated type N cable assembly is manufactured with type N to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a clamp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W05042/BK/HS can also be used in the other direction and will be a 7/16 DIN male to type N female cable assembly if the opposite connectivity is required. This type N jack to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN RF cable assembly as per your requirements.

PE3W08504

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Bulkhead Cable Using PE-P195 Coax. PE3W08504 is a SMA male right angle to SMA female bulkhead cable using PE-P195 coax. This Pasternack SMA male right angle to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08504 SMA male right angle to SMA female bulkhead cable assembly is constructed with PE-P195 coax.

PE3W13504-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. TNC Male to TNC Male Right Angle Low Loss Cable 36 Inch Length Using LMR-200 Coax., Radio frequency assembly TNC male to TNC male right angle low loss cable 36 inch length using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male right angle low loss cable 36 inch length using LMR-200 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W13504-36 can also be known as a low loss TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W13504-36 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13504-36 can also be used in the other direction and will be right angle TNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male right angle low loss cable 36 inch length using LMR-200 coax.

1 : $104.99
25 : $99.74
50 : $94.49
100 : $90.29

PE3C5047

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to SMA Female Cable Using PE-SR405FLJ Coax., Radio frequency assembly snap-on BMA jack to SMA female cable using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Snap-on BMA jack to SMA female cable using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BMA cable connection on one end and SMA cable connection on the other. Our BMA to SMA cable assemblies have a jack gender on end 1 and female on end 2. This BMA to SMA cable is a jack to female coax assembly, PE3C5047, can also be known as a BMA female to SMA jack cable assembly and will be shipped same-day as it is purchased. BMA female to SMA jack cable assembly PE3C5047 is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable BMA cable assembly is manufactured with BMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency BMA jack to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5047 can also be used in the other direction and will be SMA female to BMA jack cable assembly if the opposite connectivity is required. BMA female to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to SMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this snap-on BMA jack to SMA female cable using PE-SR405FLJ coax.

PE3C8050-48

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 48 inches. 2.2-5 Male to 4.3-10 Male Low PIM Cable 48 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male to 4.3-10 male low PIM cable 48 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male to 4.3-10 male low PIM cable 48 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 2.2-5 cable connection on one end and 4.3-10 cable connection on the other. Our low PIM 2.2-5 to 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 2.2-5 to 4.3-10 cable is a male to male coax assembly, PE3C8050-48, can also be known as a low PIM 2.2-5 plug to 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 4.3-10 plug cable assembly PE3C8050-48 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with 2.2-5 to 4.3-10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 male to 4.3-10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8050-48 can also be used in the other direction and will be 4.3-10 male to 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 plug to 4.3-10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male to 4.3-10 male low PIM cable 48 inch length using 1/4 inch superflexible coax.

1 : $139.99
25 : $132.99
50 : $125.99
100 : $120.39

PE3W19504/BL/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: MIL-STD-1553, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: MIL-STD-1553, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 78 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-30-02001, RF Cable Type: PE-30-02001, RF Cable Impedance: 78 Ohm. MIL-STD-1553 Plug to MIL-STD-1553 Plug Cable Using 78 Ohm PE-30-02001 Coax with HeatShrink., Pasternack’s PE3W19504/BL/HS MIL-STD-1553 plug to MIL-STD-1553 plug RF cable assembly using PE-30-02001 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MIL-STD-1553 plug to MIL-STD-1553 plug cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MIL-STD-1553 cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a MIL-STD-1553 cable connection on one end and a MIL-STD-1553 cable connection on the other. Our MIL-STD-1553 to MIL-STD-1553 cable assembly has a plug gender on end 1 and a plug on end 2. PE3W19504/BL/HS can also be known as a MIL-STD-1553 male to MIL-STD-1553 male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper as the cable’s inner conducting material and PE dielectric type. The minimum bend radius for this cable is 2.42 inches, allowing for a single bend without damaging the cable. Our PE3W19504/BL/HS RF cable has a pvc jacket. This radio frequency cable assembly can withstand temperatures ranging from -20 to 75 degrees C. The flexible RF cable has an in-series connection. This PE3W19504/BL/HS MIL-STD-1553 male to MIL-STD-1553 male cable assembly is built with PE-30-02001, which is a flexible coax type. The Pasternack flexible MIL-STD-1553 cable assembly is manufactured with MIL-STD-1553 to MIL-STD-1553 cable connectors and has a 78 Ohm impedance. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. This MIL-STD-1553 male to MIL-STD-1553 male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MIL-STD-1553 to MIL-STD-1553 cable assembly for quick shipment worldwide. Variations of MIL-STD-1553 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MIL-STD-1553 to MIL-STD-1553 RF cable assembly as per your requirements.

PE3TC0650-48

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-VNA-HF, RF Cable Type: PE-VNA-HF, RF Cable Impedance: 50 Ohm, Length: 48 inches. 2.4mm Female to 2.4mm Female Precision Cable 48 Inch Length Using High Flex VNA Test Coax., Radio frequency assembly 2.4mm female to 2.4mm female precision cable 48 inch length using high flex VNA test coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.4mm female to 2.4mm female precision cable 48 inch length using high flex VNA test coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax precision cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our precision 2.4mm to 2.4mm cable assemblies have a female gender on end 1 and female on end 2. This 2.4mm to 2.4mm cable is a female to female coax assembly, PE3TC0650-48, can also be known as a precision 2.4mm jack to 2.4mm jack cable assembly and will be shipped same-day as it is purchased. 2.4mm jack to 2.4mm jack cable assembly PE3TC0650-48 is built with PE-VNA-HF which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 50 GHz maximum frequency 2.4mm female to 2.4mm female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Precision 2.4mm jack to 2.4mm jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm female to 2.4mm female precision cable 48 inch length using high flex VNA test coax.

1 : $5,030.0
25 : $4,778.5
50 : $4,527.0
100 : $4,325.8

PE3W01504LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Male to SMA Male Right Angle Cable Using LMR-240 Coax with HeatShrink, LF Solder. PE3W01504LF/HS is a reverse polarity TNC male to SMA male right angle cable using LMR-240 coax. This Pasternack reverse polarity TNC male to SMA male right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. TNC to SMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male TNC to male SMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01504LF/HS TNC reverse polarity male to SMA male right angle cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W13504-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. TNC Male to TNC Male Right Angle Low Loss Cable 48 Inch Length Using LMR-200 Coax., Radio frequency assembly TNC male to TNC male right angle low loss cable 48 inch length using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male right angle low loss cable 48 inch length using LMR-200 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W13504-48 can also be known as a low loss TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W13504-48 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W13504-48 can also be used in the other direction and will be right angle TNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male right angle low loss cable 48 inch length using LMR-200 coax.

1 : $105.99
25 : $100.69
50 : $95.39
100 : $91.15

PE3W15040-300

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm, Length, Max: 300 inches. 7/16 DIN Male Right Angle to 7/16 DIN Male Right Angle Low Loss Cable 300 Inch Length Using LMR-600-UF Coax., Radio frequency assembly 7/16 DIN male right angle to 7/16 DIN male right angle low loss cable 300 inch length using LMR-600-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male right angle to 7/16 DIN male right angle low loss cable 300 inch length using LMR-600-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle 7/16 DIN cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss right angle 7/16 DIN to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W15040-300 can also be known as a low loss right angle 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W15040-300 RF cable has a TPE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our right angle 7/16 DIN male to right angle 7/16 DIN male cable has a maximum VSWR of 1.323:1. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3W15040-300 is built with LMR-600-UF which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss 7/16 DIN right angle plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $434.99
10 : $426.29
25 : $417.59
100 : $408.89

PE15A5048F

Pasternack Enterprises

Key Specifications, Frequency, Min: 6 GHz, Frequency, Max: 18 GHz, Gain, Min: 35 dB, 1dB Compression Point, Min: 33 dBm, 3rd Intercept Point, Typ: 40 dB, Voltage, DC Typ: 12 Volts. 2 Watt P1dB, 6 GHz to 18 GHz, Medium Power Amplifier with Heatsink, SMA, 35 dB Gain, 40 dBm IP3. RF solid state power amplifier (SSPA) PE15A5048F from Pasternack is part of the largest selection of in-stock radio frequency microwave and millimeter wave amplifiers available for same-day shipment. This Pasternack solid state RF power amplifier is a medium power amp design constructed in a connectorized package. Our SSPA is designed with SMA connectors and rated at 2 Watts. Pasternack solid state power amplifier part number PE15A5048F SMA medium power amp has a 35 dB minimum gain. The medium power medium gain amp is rated with a P1dB of 33 dBm. Our radio frequency medium power solid state amplifier is constructed for minimum frequency of 6 GHz and a maximum frequency of 18 GHz. Additional radio frequency specs on this high frequency medium gain medium power solid state power amplifier from Pasternack can be found in the details on the RF power amplifier datasheet specifications PDF above. Our medium power medium gain HF amplifier is part of over one 40,000 RF, microwave and millimeter wave components in-stock. This medium power 2 Watt radio frequency amplifier is ready for same day purchase and shipping worldwide. Pasternack also stocks a wide range of other radio signal SSPAs that ship same-day from our facility for all your RF, microwave and millimeter wave amplifier component needs.

1 : $13,700.0
5 : $13,152.0
10 : $12,604.0
25 : $12,056.0

PE3W05043/TN/HS

Pasternack Enterprises

Relay Specialties

BLR-504

OptiFuse

Fuse Block; ATO/ATC Blade; 4P 30 A per circuit; 100 A total Covered; 30 A; 32 VDC

1 : $23.15
10 : $20.58
25 : $18.52
50 : $16.84
100 : $16.11

737

N5040G 2

APM HEXSEAL

Switch Boot; Pushbtn,Full Boot Front of Panel; 1/4-32 NS-2B 0.313" (7.95mm) Height

1 : $4.36
10 : $4.17
25 : $3.99
50 : $3.81
100 : $3.7

250

N5040 2

APM HEXSEAL

Switch Boot; Pushbtn,Full Boot Front of Panel; 1/4-40 NS-2B 0.313" (7.95mm) Height

1 : $3.49
10 : $3.35
25 : $3.2
50 : $3.06
100 : $2.97

250

MSM05041

BlockMaster Blocks

PCB Terminal Block; 5-position 5.00mm; PCB Mount; 17.5A; 300V 30-12AWG; 35°Mod; Green

1 : $2.26
10 : $2.23
25 : $2.2
50 : $2.17
100 : $2.15

150

MSM15045

BlockMaster Blocks

PCB Terminal Block; 15-pos 5.08mm; PCB Mount; 17.5A; 300V 30-12AWG; 35°Mod; Green

1 : $6.79
10 : $6.7
25 : $6.61
50 : $6.52
100 : $6.44

EE530-50400

NAMCO

Inductive Proximity Switch AC/DC PLG NO FS SCP

1 : $232.62

BLR-I-504

OptiFuse

Fuse Block; ATO/ATC Blade; 4P 30 A per circuit; 100 A total LED; Covered; 30 A; 32 VDC

1 : $35.79
10 : $31.81
25 : $28.63
50 : $26.03
100 : $24.9

1504

Curtis Industries

Term Blk; 4-pos; 0.375" Surface Mt; Steel Scr w/Mtg Ends; 20A; 300V; PPO

1 : $3.25
25 : $3.0
50 : $2.89
100 : $2.6
200 : $2.44

NCG-0504B

ABB Low Voltage Products and Systems

Nylon Cable Gland Cable Range 9.0-16.0MM 1/2 NPT Thread, Black

1 : $5.58

Venkel Ltd.

C0603Z5U250-473ZNP

VENKEL LTD

Chip Capacitor;0603;Z5U;25V;0.047uF;+80-20%
RoHS : Compliant

87,250

AGCR0603-QL-1504FT

VENKEL LTD

Auto Grade Resistor;0603;1/10W;�200PPM;1.5M;�1%
RoHS : Compliant

10,000

CR1206-4W-1504FT

VENKEL LTD

Chip Resistor;1206;1/4W;1.5M;�1%
RoHS : Compliant

5,000

PHCR2512-504JKB

VENKEL LTD

Precision-High Value CR;2512;500K;�5%;100PPM
RoHS : Compliant

HVCR0603-10W-1504FT

VENKEL LTD

High Voltage CR;0603;1/10W;1.5M;�1%
RoHS : Compliant

PWCR2512-ZK-1504DT

VENKEL LTD

Pulse Withstanding CR;2512;1.5W;�100PPM;1.5M;�0.5%
RoHS : Compliant

CRG0402-P-7504FT

VENKEL LTD

RoHS 10/10 Green CR;0402;1/16W;7.5M;�1%
RoHS : Compliant

C0201C0G250-470GNP

VENKEL LTD

Chip Capacitor;0201;C0G;25V;47pF;�2%
RoHS : Compliant

C0201HQN250-4R9BNP

VENKEL LTD

High-Q NP0 Capacitor;0201;HQN;25V;4.9pF;�0.1pF
RoHS : Compliant

C0402HQN250-4R7CNP

VENKEL LTD

High-Q NP0 Chip Capacitor;0402;HQN;25V;4.7pF;�0.25pF
RoHS : Compliant

TFCR2512-2W-K-1504FT

VENKEL LTD

Thin Film CR;2512;1/2W;�100PPM;1.5M;�1%
RoHS : Compliant

C0603HQN250-4R9ANP

VENKEL LTD

High-Q NP0 Capacitor;0603;HQN;25V;4.9pF;�0.05pF
RoHS : Compliant

C0603X7R250-472KNP

VENKEL LTD

Chip Capacitor;0603;X7R;25V;4700pF;�10%
RoHS : Compliant

HVCR2010-2W-1504FT

VENKEL LTD

High Voltage CR;2010;1/2W;1.5M;�1%
RoHS : Compliant

CR0603-10W-7504FT

VENKEL LTD

Chip Resistor;0603;1/10W;7.5M;�1%
RoHS : Compliant

Win Source Electronics

AZ1045-04F.R7G

Amazing Microelectronic Corp

ESD Suppressor Diode Diode Array Uni-Dir 5V 10-Pin DFN T/R
RoHS : Compliant

8,045 : $0.0373
6,445 : $0.0388
4,955 : $0.0404
3,460 : $0.0434
2,230 : $0.0449
1,045 : $0.0479

176,955

MIC5504-3.3YM5

Tech Public

3.3V Positive Fixed SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators RoHS

2,015 : $0.1491
1,615 : $0.1552
1,240 : $0.1613
870 : $0.1734
560 : $0.1794
265 : $0.1916

89,600

MIC5504-3.3YM5-TR

Microchip Technology Inc

LDO Regulator Pos 3.3V 0.3A Medical 5-Pin SOT-23 T/R / IC REG LDO 3.3V 0.3A SOT-23-5
RoHS : Compliant

2,480 : $0.1212
1,985 : $0.1261
1,530 : $0.131
1,065 : $0.1409
690 : $0.1458
325 : $0.1557

73,200

MAX5048BAUT+

Maxim Integrated Products

7.6A, 12NS, SOT23/TDFN MOSFET DR
RoHS : Compliant

237 : $1.2673
190 : $1.3188
146 : $1.3704
102 : $1.4734
66 : $1.5249
31 : $1.6279

55,000

RCLAMP2504N.TCT

Semtech Corporation

TVS DIODE 2.5VWM 15VC 10SLP
RoHS : Compliant

400 : $0.7519
300 : $0.8387
235 : $0.8676
170 : $0.8965
110 : $0.9254
45 : $1.1278

28,080

ADR5041BRTZ

Analog Devices Inc

345 : $0.876
275 : $0.9116
215 : $0.9472
150 : $1.0184
95 : $1.054
45 : $1.1252

27,520

HCPL-4504-500E

Broadcom Limited

OPTOISO 3.75KV TRANSISTOR 8DIPGW
RoHS : Compliant

655 : $0.4593
490 : $0.5123
380 : $0.5299
275 : $0.5476
180 : $0.5653
75 : $0.6889

25,868

ADR5041BKSZ-REEL7

Analog Devices Inc

IC VREF SHUNT 2.5V SC70
RoHS : Compliant

157 : $1.9186
117 : $2.14
91 : $2.2138
66 : $2.2876
43 : $2.3614
18 : $2.8779

16,350

ADP2504ACPZ-3.3-R7

Analog Devices Inc

Conv DC-DC 2.3V to 5.5V Non-Inv/Inv/Step Up/Step Down Single-Out 3.3V 1A 10-Pin LFCSP EP T/R / IC REG BCK BST 3.3V 1.3A 10LFCSP
RoHS : Compliant

106 : $2.8445
79 : $3.1727
61 : $3.2821
45 : $3.3915
29 : $3.5009
12 : $4.2667

10,960

ATF1504AS-10AU44

Microchip Technology Inc

IC CPLD 64MC 10NS 44TQFP
RoHS : Compliant

38 : $7.9805
29 : $8.9013
22 : $9.2082
16 : $9.5152
11 : $9.8221
5 : $11.9707

9,600

ADR5043ARTZ-REEL7

Analog Devices Inc

IC VREF SHUNT 3V SOT23-3
RoHS : Compliant

330 : $0.9203
245 : $1.0265
190 : $1.0619
140 : $1.0973
90 : $1.1327
40 : $1.3804

9,000

ADRF5040BCPZ-R7

Analog Devices Inc

IC RF SWITCH SP4T 12GHZ 24LFCSP / High power handling
RoHS : Compliant

27 : $11.1819
22 : $11.6364
17 : $12.091
12 : $13.0
8 : $13.4546
4 : $14.3637

6,000

SST25VF040B-50-4C-S2AF-T

Microchip Technology Inc

IC FLASH 4MBIT 50MHZ 8SOIC
RoHS : Compliant

207 : $1.6292
155 : $1.8171
120 : $1.8798
87 : $1.9424
56 : $2.005
23 : $2.4437

2,150

DAC60504BRTET

Texas Instruments

IC DAC 12BIT V-OUT 16WQFN
RoHS : Compliant

28 : $11.108
21 : $12.3896
16 : $12.8169
12 : $13.2441
8 : $13.6713
4 : $16.6619

1,550

ADRF5044BCCZN

Analog Devices Inc

IC RF SWITCH SP4T 30GHZ 24LGA / RF Switch IC General Purpose SP4T 50Ohm 24-LGA (4x4)
RoHS : Compliant

3 : $149.697
2 : $166.9697
1 : $172.7273

450

Wuhan P&S

UJ4C075044K4S

onsemi

Silicon Carbide (SiC) Cascode JFET
RoHS : Compliant

1 : $21.48
100 : $13.71
500 : $11.31
1,000 : $10.39

600

50480800BCNUNNFZCWC Reseller

Enlace URL