| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
52W... Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() TME | BD52W05G-CTR | ROHM Semiconductor | IC: supervisor circuit; voltage detector; open drain; Ch: 1 RoHS : Compliant |
| 4,015 | |
| BD52W04G-CTR | ROHM Semiconductor | IC: supervisor circuit; voltage detector; open drain; Ch: 1 RoHS : Compliant |
| 2,690 | ||
| 1852 WH001 | Alpha Wire | Wire; HookUp Wire; stranded; Cu; 28AWG; PVC; white; 600V; 305m |
| 4 | ||
| RCP052 WR06 | EQUIP-TEST | Test acces: test probe socket; Plating: gold-plated; AgNi |
| 0 | ||
| WR252WJ0560T4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 56Ω; SMD; 1225; 2W; ±5%; WR25; 200V; -55÷155°C RoHS : Compliant |
| 0 | ||
| WR252WJ0472T4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 4.7kΩ; SMD; 1225; 2W; ±5%; WR25; 200V RoHS : Compliant |
| 0 | ||
MMBD352WT1G![]() | onsemi | Diode: Schottky switching; SC70,SOT323; SMD; 7V; reel,tape RoHS : Compliant |
| 0 | ||
| RCP052 WR09 | EQUIP-TEST | Test acces: test probe socket; Plating: gold-plated; AgNi |
| 0 | ||
| SIM5-5-2W | Takachi Electronics Enclosure Co Ltd | Enclosure: for router; white; ASA; X: 45mm; Y: 50mm; Z: 23mm; SIM |
| 0 | ||
| WR252WF1103T4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 110kΩ; SMD; 1225; 2W; ±1%; WR25; 200V RoHS : Compliant |
| 0 | ||
| WR252WF200JT4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 20Ω; SMD; 1225; 2W; ±1%; WR25; 200V; -55÷155°C RoHS : Unknown |
| 0 | ||
| WR252WF680KT4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 6.8Ω; SMD; 1225; 2W; ±1%; WR25; 200V; -55÷155°C |
| 0 | ||
| WR252WJ0121T4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 120Ω; SMD; 1225; 2W; ±5%; WR25; 200V; -55÷155°C RoHS : Compliant |
| 0 | ||
M1MA152WAT1G![]() | onsemi | Diode: switching; SMD; 80V; 0.15A; 10ns; SC59; Ufmax: 1.2V; reel,tape RoHS : Compliant |
| 0 | ||
| WR252WJ0160T4E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 16Ω; SMD; 1225; 2W; ±5%; WR25; 200V; -55÷155°C RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | MIC37152WR | Microchip Technology Inc | - Rail/Tube (Alt: MIC37152WR) RoHS : Compliant |
| 4,032 | |
| MIC29152WU | Microchip Technology Inc | - Rail/Tube (Alt: MIC29152WU) RoHS : Compliant |
| 393 | ||
| MS3452W20-33S | Conesys | - Bulk (Alt: MS3452W20-33S) RoHS : Not Compliant | 14 | |||
| 3352W-1-103LF | Bourns Inc | - Bulk (Alt: 3352W-1-103LF) RoHS : Compliant |
| 11 | ||
| MS3452W22-2P | Amphenol Corporation | - Bulk (Alt: MS3452W22-2P) RoHS : Not Compliant | 4 | |||
| MS3452W20-14P | Conesys | - Bulk (Alt: MS3452W20-14P) RoHS : Not Compliant | 4 | |||
| CA-628485-2W4 | Amphenol Corporation | CA-628485-2W4 - Bulk (Alt: CA-628485-2W4) RoHS : Not Compliant | 3 | |||
| MS3452W18-10S | Conesys | - Bulk (Alt: MS3452W18-10S) RoHS : Not Compliant | 3 | |||
| MS3452W32-1SW | Amphenol Corporation | - Bulk (Alt: MS3452W32-1SW) RoHS : Not Compliant | 2 | |||
| MS3452W16S-1SZ | Conesys | - Bulk (Alt: MS3452W16S-1SZ) RoHS : Not Compliant | 2 | |||
| MS3452W24-10P | Amphenol Corporation | - Bulk (Alt: MS3452W24-10P) RoHS : Not Compliant | 1 | |||
| MS3452W10SL-3P | Amphenol Corporation | - Bulk (Alt: MS3452W10SL-3P) RoHS : Not Compliant | 1 | |||
| MS3452W20-33S | Amphenol Corporation | - Bulk (Alt: MS3452W20-33S) RoHS : Not Compliant | 1 | |||
| MS3452W22-22SX | Amphenol Corporation | - Bulk (Alt: MS3452W22-22SX) RoHS : Not Compliant | 1 | |||
| MS3452W22-23SY | Conesys | - Bulk (Alt: MS3452W22-23SY) RoHS : Not Compliant | 1 | |||
![]() Newark | EESX952W1M | OMRON Industrial Automation | Photomicro Sensor, 5Mm, 50Ma; |Omron Industrial Automation EESX952W1M RoHS : Compliant |
| 5,903 | |
| MIC29152WU-TR | Microchip Technology Inc | Ldo, Adj, 1.25-25V, 1.5A, To-247-5; |Microchip Technology MIC29152WU-TR RoHS : Compliant |
| 1,332 | ||
| MIC29152WU-TR | Microchip Technology Inc | Ldo, Adj, 1.25-25V, 1.5A, To-247-5; |Microchip Technology MIC29152WU-TR RoHS : Compliant |
| 1,332 | ||
| MJ-352W-0 | SPC Multicomp | Conn Aud, 3Pos, Socket, 3.5 Mm; |Multicomp Pro MJ-352W-0 RoHS : Compliant |
| 566 | ||
| 3352W-1-103LF | Bourns Inc | Trimmer Single Turn Cermet Side Adjust; |Bourns, Inc. 3352W-1-103LF RoHS : Compliant |
| 500 | ||
| BD52W05G-CTR | ROHM Semiconductor | Voltage Detector, -40 To 125Deg C; |Rohm BD52W05G-CTR RoHS : Compliant |
| 318 | ||
| BD52W05G-CTR | ROHM Semiconductor | Voltage Detector, -40 To 125Deg C; |Rohm BD52W05G-CTR RoHS : Compliant |
| 318 | ||
| ADAU1452WBCPZ | Analog Devices Inc | Audio Processor, 16 Channel, Lfcsp-Ep; |Analog Devices, Inc. ADAU1452WBCPZ RoHS : Compliant |
| 126 | ||
| MIC29152WU | Microchip Technology Inc | Ldo Voltage Regulator, Adjustable; |Microchip Technology MIC29152WU RoHS : Compliant |
| 76 | ||
| MIC37252WR | Microchip Technology Inc | Ldo, Reg, 6Vin, 2.5A, Adj, 5Spak; |Microchip Technology MIC37252WR RoHS : Compliant |
| 19 | ||
| 1852 WH001 | Alpha Wire | Hook-Up Wire; |Alpha Wire 1852 WH001 RoHS : Compliant |
| 14 | ||
| 5852 WH005 | Alpha Wire | Hook-Up Wire; |Alpha Wire 5852 WH005 RoHS : Compliant |
| 6 | ||
| REFICL5102U52WCCTOBO1 | Infineon Technologies AG | Ref Design Board, Pfc+Lcc Led Driver; |Infineon Technologies REFICL5102U52WCCTOBO1 RoHS : Compliant |
| 3 | ||
| 5852 WH001 | Alpha Wire | Hook-Up Wire; |Alpha Wire 5852 WH001 RoHS : Compliant |
| 2 | ||
| MIC29752WWT | Microchip Technology Inc | Ldo, Adj, 1.25-25V, 7.5A, To-247-5; |Microchip Technology MIC29752WWT RoHS : Compliant |
| 2 | ||
![]() Analog Devices Inc | ADAU1452WBCPZ | Analog Devices Inc | 300 MHz 32bit SigmaDSP Audio P RoHS : Compliant |
| 1,575 | |
| ADAU1452WBCPZ-RL | Analog Devices Inc | 300 MHz 32bit SigmaDSP Audio P RoHS : Compliant |
| 295 | ||
![]() RS | 4152 (WHC 500) | Heyco | NYLON WIRE HARNESS CLAMP, .5" BUNDLE DIA., #10SCREW, NATURAL |
| 3,440 | |
| 3240252 (WCC 14) | Phoenix Contact | CABLE CLAMP FOR DIN RAILS, GALVANIZED STEEL, FOR 14MM CBL DIA, WCC SERIES, WCC 14 |
| 314 | ||
| 5352-W | Leviton Manufacturing Co | WH REC DUP TSLOT 2PO 3WI 20A125V |
| 10 | ||
| 16352-W | Leviton Manufacturing Co | HEAVY DUTY, SELF GROUNDING, 125 VAC, 20 A, 2 POLE, 3 WIRE, DECORA PLUS SERIES |
| 10 | ||
| EE-SX952-W 1M (EESX952W1M) | OMRON Industrial Automation | PHOTO SENSOR, F-SHAPED, 6.5 MM SLOT, 2 NPN OUTPUTS, 1M CABLE, EE-SX95 SERIES |
| 9 | ||
| BCC052W (BCC M313-M413-3E-300-EX43T2-020) | Balluff Inc | BCC - CONNECTIVITY PRODUCTS, BCC M313-M413-3E-300-EX43T2-020 |
| 7 | ||
| 5252-W | Leviton Manufacturing Co | DUPLEX RECEPTACLE, OUTLET, SELF-GROUNDING, 2 POLE, HEAVY-DUTY, SMOOTH FACE |
| 5 | ||
| 1212152 (WIREFOX 10/SB) | Phoenix Contact | REPLACEMENT CABLE STRIPPER BLADE FOR 10, 0.02-10 MM, 2 CONTACTS, WIREFOX SERIES |
| 5 | ||
| 3PS-125-2-WT-S | Brady Worldwide Inc | 3" CORE DOUBLE SIDED PERMASLEEVE POLYOLEFIN WIRE MARKING SLEEVES |
| 3 | ||
| 5952WF | 3M | HEAVY DUTY MOUNTING TAPE, WHITE, 3/4 IN X 15 YD, 45.0 MIL |
| 2 | ||
| MS3452W22-22P | Amphenol Aerospace | CONNECTOR, CIRCULAR, 4P BOX MT PIN RECEPT SZ 22 MIL-DTL-5015 |
| 2 | ||
| MKTC52/WKT-26 | Schmersal | JOYSTICK 22 3MM MOUNTING HOLD KNURLED NUT UP TO 6MM FRONT PLATE THICKNESS |
| 1 | ||
| PS-125-2-WT-S-2 | Brady Worldwide Inc | IP SERIES PERMASLEEVE POLYOLEFIN WIRE MARKING SLEEVES |
| 1 | ||
| 3FR-125-2-WT-S-2 | Brady Worldwide Inc | FLUID RESISTANT POLYOLEFIN WIRE MARKING SLEEVES, .125"DIA X 1"W, WHITE |
| 1 | ||
| LS1511-52-WH-BL-125 (RLS-00102124|LS1511-52-WH-BL-125|LS151152WHBL125) | Carling Technologies | ROCKER SWITCH, SP, ILLUMINATED, LS-SERIES |
| 0 | ||
![]() Microchip Technology Inc | MIC37152WR-TR | Microchip Technology Inc | LV, 1.5A uCap LDO, SPAK, Projected EOL: 2035-11-29 RoHS : Compliant |
| 8,381 | |
| MIC37252WU | Microchip Technology Inc | LV, 2.5A uCap LDO, DDPAK, Projected EOL: 2036-01-27 RoHS : Compliant |
| 7,500 | ||
| MIC37152WR | Microchip Technology Inc | LV, 1.5A uCap LDO, SPAK, Projected EOL: 2036-07-06 RoHS : Compliant |
| 6,432 | ||
MIC37252WR-TR![]() | Microchip Technology Inc | LV, 2.5A uCap LDO, SPAK, Projected EOL: 2036-03-17 RoHS : Compliant |
| 2,744 | ||
| MIC37252WR | Microchip Technology Inc | LV, 2.5A uCap LDO, SPAK, Projected EOL: 2036-04-05 RoHS : Compliant |
| 1,488 | ||
MIC29152WD-TR![]() | Microchip Technology Inc | 1.5A LDO Adj. + Shutdown, TO-252, Projected EOL: 2036-06-15 RoHS : Compliant |
| 861 | ||
| MIC29152WT | Microchip Technology Inc | 1.5A LDO Adj. + Shutdown, TO-220, Projected EOL: 2036-01-28 RoHS : Compliant |
| 265 | ||
| MIC39152WU-TR | Microchip Technology Inc | 1.5A, Adjustable VOUTuCap LDO, DDPAK, Projected EOL: 2041-10-18 RoHS : Compliant |
| 251 | ||
| MIC29152WU-TR | Microchip Technology Inc | 1.5A LDO Adj. + Shutdown, DDPAK, Projected EOL: 2036-01-28 RoHS : Compliant |
| 27 | ||
| MIC29752WWT | Microchip Technology Inc | 7.5A LDO Adj. + Shutdown, TO-247, Projected EOL: 2036-10-28 RoHS : Compliant |
| 14 | ||
| MIC39152WU | Microchip Technology Inc | 1.5A, Adjustable VOUTuCap LDO, DDPAK, Projected EOL: 2035-12-16 RoHS : Compliant |
| 3 | ||
| MIC29152WU | Microchip Technology Inc | 1.5A LDO Adj. + Shutdown, DDPAK, Projected EOL: 2036-02-11 RoHS : Compliant |
| 0 | ||
| MIC39152WD | Microchip Technology Inc | 1.5A Adjustable Wide VIN LDO, TO-252, Projected EOL: 2036-07-12 - Contact for Pricing RoHS : Compliant | 0 | |||
| MIC37252WU-TR | Microchip Technology Inc | LV, 2.5A F2432Cap LDO, DDPAK, Projected EOL: 2036-05-11 RoHS : Compliant |
| 0 | ||
MIC39152WD-TR![]() | Microchip Technology Inc | 1.5A Adjustable Wide VIN LDO, TO-252, Projected EOL: 2035-12-02 RoHS : Compliant |
| 0 | ||
![]() Onlinecomponents.com | 730-52W | E-Z-Hook | RoHS : Compliant |
| 0 | |
| 210-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 203-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| AWP0F-52W | Leviton Manufacturing Co | RENIIPLATE-5N2W-FINSWHT RoHS : Compliant |
| 0 | ||
| 212-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 313-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 703-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| AWP00-52W | Leviton Manufacturing Co | RENIIPLATE-5N2W-0FINWHT RoHS : Compliant |
| 0 | ||
| 211-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 204-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 230-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 304-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 213-52W | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| 203-52W-14S | E-Z-Hook | RoHS : Compliant |
| 0 | ||
| M85049/8-52W | Amphenol PCD | Backshell - Env-EMI/RFI - Cadmium RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | M1MA152WKT1G![]() | onsemi | Rectifier Array Standard 80V 100mA SOT-23-3 T/R RoHS : Compliant |
| 117,000 | |
| NSVM1MA152WKT1G | onsemi | Rectifier Array Standard 80V 100mA SOT-23-3 T/R RoHS : Compliant |
| 91,604 | ||
M1MA152WAT1G![]() | onsemi | Rectifier Array Standard 80V 100mA SOT-23-3 T/R RoHS : Compliant |
| 80,449 | ||
| NSVM1MA152WAT1G | onsemi | Rectifier Array Standard 80V 100mA SOT-23-3 T/R RoHS : Compliant |
| 1,933 | ||
| LC75852W-E | onsemi | Display Drivers and Controller LCD 90 Segment Serial 64-QFP Tray RoHS : Compliant |
| 10,813 | ||
| ADBMS2952WCCSZ | Analog Devices Inc | Battery Pack Monitor RoHS : Compliant |
| 260 | ||
SNJ54H52W![]() | Texas Instruments | AND-OR Gate, TTL/H/L Series, 1-Func, 9-Input, TTL, CDFP14 RoHS : Not Compliant |
| 42 | ||
| SNJ54LS352W | Texas Instruments | Multiplexer, LS Series, 2-Func, 4 Line Input, 1 Line Output, Inverted Output, TTL, CDFP16 RoHS : Not Compliant |
| 228 | ||
| SNJ54AS652W | Texas Instruments | Bus Transceiver 1 Element 8 Bits 5V 24-CFP RoHS : Not Compliant |
| 45 | ||
74LVTH652WMX![]() | Fairchild Semiconductor Corporation | Bus Transceiver 1 Element 8 Bits 3.3V 24-SOIC T/R RoHS : Compliant |
| 0 | ||
DM74ALS652WMX![]() | Fairchild Semiconductor Corporation | 74ALS652 - Octal 3-STATE Bus Transceiver and Register RoHS : Not Compliant |
| 5,567 | ||
| FAN6752WMY | Fairchild Semiconductor Corporation | Highly Integrated Green-Mode PWM Controller RoHS : Compliant |
| 4,761 | ||
MM74HC4052WM![]() | Fairchild Semiconductor Corporation | IC SP4T 4:1 2 CRCT 35MHz 2V - 6V 16-SOIC Tube RoHS : Compliant |
| 1,025 | ||
![]() Sager | XGA52W-88 | Saia-Burgess | Basic / Snap Action Switches | 0 | ||
| 5352WTR | Hubbell Incorporated | RCPT, DUP, HUBPRO 20/125, 5-20R, TR, WHI |
| 0 | ||
| 4052WHITE | ABB Group | Thomas & Betts | 0 | |||
7108J52WQE22![]() | C&K Switches | Rocker Switches Miniature Rocker & Lever Handle Switch RoHS : Compliant | 0 | |||
| IG5352W | Hubbell Incorporated | COMM 20A SIDE & BACK WIRED IG DUP WH |
| 0 | ||
| 7101J52W5QE32 | C&K Switches | Rocker Switches RoHS : Compliant | 0 | |||
| IG5352WTR | Hubbell Incorporated | COMM 20A SIDE & BACK WIRED IG TR WH |
| 0 | ||
| LW7GL-M1C52W | IDEC Corporation | Pushbutton Switches 25mm sq Pushbutton Illuminated | 0 | |||
| LW6GL-M1C52W | IDEC Corporation | Pushbutton Switches Push button Illuminated | 0 | |||
| LW6ML-A1C52W | IDEC Corporation | Pushbutton Switches 25mm Pushbutton Illuminated | 0 | |||
| LP3-F3L352W | OTTO Engineering Inc | ILLUMINATED, SEALED, MOMENTARY ACTION PUSHBUTTON SWITCH RoHS : Compliant |
| 0 | ||
| 5252WTR | Hubbell Incorporated | RCPT, DUP, HUBPRO 15/125, 5-15R, TR, WHI |
| 0 | ||
| NS752W | Hubbell Incorporated | Hubbell | 0 | |||
| HA2L-A1C52-W | IDEC Corporation | Pushbutton Switches 16mm Pushbutton Illuminated | 0 | |||
| 651652-WW-0N-XVL1 | Carling Technologies | Rocker Switches | 0 | |||
![]() Ameya Holding Limited | ADAU1452WBCPZ-R | Analog Devices Inc | 10,000 | |||
| BD52W05G-CTR | ROHM Semiconductor | Nano Energy™, 车载用,灵活设置延迟时间 Dual输出 窗口电压检测器(复位)IC RoHS : Compliant |
| 6,300 | ||
| BD52W01G-CTR | ROHM Semiconductor | Nano Energy™, 车载用,灵活设置延迟时间 Dual输出 窗口电压检测器(复位)IC RoHS : Compliant |
| 6,300 | ||
| LKMD1152W4R7MF | Ymin | 500 | ||||
| MIC29152WU | Microchip Technology Inc | MIC29152 Series 1.5 A 1.25 to 25 V ADJ Output LDO Voltage Regulator - TO-263-5 RoHS : Compliant | 122 | |||
| BD52W04G-CTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| BD52W02G-CTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| BD52W06G-CTR | ROHM Semiconductor | RoHS : Compliant |
| 55 | ||
| MIC29152WD | Microchip Technology Inc | RoHS : Compliant | 39 | |||
![]() ComSIT USA | MA152WATX | Panduit Corp | Rectifier Diode, 2 Element, 0.1A, Silicon RoHS : Not Compliant | 38,005 | ||
MIC29152WUTR![]() | Microchip Technology Inc | Adjustable Positive LDO Regulator, 1.25V Min, 25V Max, 0.6V Dropout, PSSO5 RoHS : Compliant | 1,492 | |||
| SAA7152WP | Philips Semiconductors | Electronic Component RoHS : Not Compliant | 75 | |||
| MIC29152WT | Micrel Inc | HIGH-CURRENT LOW-DROPOUT REGULATOR Adjustable Positive LDO Regulator, 1.25V Min, 25V Max, 0.6V Dropout, BIPolar RoHS : Compliant | 58 | |||
| MIC29152WU | Micrel Inc | HIGH-CURRENT LOW-DROPOUT REGULATOR Adjustable Positive LDO Regulator, 1.25V Min, 25V Max, 0.6V Dropout, PSSO5 RoHS : Not Compliant | 50 | |||
![]() Interstate Connecting Components | MS3452W20-8S | Conesys | Box Mt. Receptacle Cad Od Alum |
| 18 | |
| MS3452W14S-2SX | Conesys | Box Mt. Receptacle Cad Od Alum |
| 6 | ||
| D38999/52W17R | Glenair Inc | 38999 CAP RECP SZ 17 | 0 | |||
| MS3452W12-5A | Amphenol Aerospace | RECEPT 3452W125A | 0 | |||
| MS3452W12S-3B | Amphenol Aerospace | RECEPT 3452W12S3B | 0 | |||
| MS3452W14S-6S L/C | Amphenol Aerospace | RECEPT 3452W14S6SL | 0 | |||
| MS3452W16-10S L/C | Amphenol Aerospace | RECEPT 3452W1610SL | 0 | |||
| MS3452W16-10S L/C | Conesys | BOX MT. RECEPTACLE CAD OD ALUM LESS CNTCTS |
| 0 | ||
| MS3452W18-11B | Amphenol Aerospace | RECEPT 3452W1811B | 0 | |||
| MS3452W20-11S | Conesys | Box Mt. Receptacle Cad Od Alum |
| 0 | ||
| MS3452W20-18B | Amphenol Aerospace | RECEPT 3452W2018B | 0 | |||
| MS3452W20-33S L/C | Amphenol Aerospace | RECEPT 3452W2033SL | 0 | |||
| MS3452W20-4PY | Conesys | Box Mt. Receptacle Cad Od Alum |
| 0 | ||
| MS3452W20-8S | Amphenol Aerospace | RECEPT 3452W208S | 0 | |||
| MS3452W20-8S | Conesys | CONNECT BOX MT RCPT | 0 | |||
![]() NexGen Digital | SAA7152WP | Philips E C G Inc | 106 | |||
![]() PEI Genesis | MS3452W20-19P | Amphenol Aerospace |
| 95 | ||
| MS3452W20-19P-LC | Amphenol Aerospace |
| 95 | |||
| MS3452W20-19PW | Amphenol Aerospace |
| 95 | |||
| MS3452W20-19PW-LC | Amphenol Aerospace |
| 95 | |||
| MS3452W20-19PX | Amphenol Aerospace |
| 95 | |||
| MS3452W20-2S-LC | Aero-Electric Connector Inc |
| 12 | |||
| MS3452W20-2P-LC | Aero-Electric Connector Inc |
| 12 | |||
| MS3452W20-2P | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 12 | ||
| MS3452W20-14P | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 12 | ||
| MS3452W16-11S | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 3 | ||
| MS3452W16-11S-LC | Aero-Electric Connector Inc |
| 3 | |||
![]() Powell Electronics | MS3452W16S-1PZ | Conesys | BOX MT. REC. |
| 127 | |
| MS3452W16S-1PY | Conesys | BOX MT. REC. |
| 127 | ||
| MS3452W14S-2SX | Conesys | BOX MT. REC. |
| 49 | ||
| MS3452W14S-2SW | Conesys | BOX MT. REC. |
| 49 | ||
| MS3452W16-11PW | Conesys | BOX MT. REC. |
| 48 | ||
| 3452W184P | Amphenol Corporation | MIL- C 5015 RECEPT CONNECTOR |
| 18 | ||
| MS3452W20-4PY | Conesys | BOX MT. REC. |
| 8 | ||
| MS3452W20-4PX | Conesys | BOX MT. REC. |
| 8 | ||
| 3452W369A | Amphenol Corporation | MIL- C 5015 RECEPT CONNECTOR |
| 4 | ||
| 3452W1811B | Amphenol Corporation | MIL- C 5015 RECEPT CONNECTOR |
| 3 | ||
| MS3452W20-4PY | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 2 | ||
| MS3452W20-4PX | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 2 | ||
| MS3452W20-19PLC | Amphenol Corporation | CONNECTOR |
| 1 | ||
| MS3452W36-6PY | Amphenol Corporation | CONNECTOR |
| 1 | ||
| MS3452W20-21SWLC | Amphenol Corporation | CONNECTOR |
| 1 | ||
![]() Chip 1 Exchange | MSD20068K-5%-2W | INSTOCK | 11,000 | |||
| WAO2-22R-5%-2W | INSTOCK | 10,993 | ||||
| ADAU1452WBCPZ-RL | Analog Devices Inc | INSTOCK RoHS : Compliant | 10,000 | |||
| MSD20022K-5%-2W | INSTOCK | 7,995 | ||||
| RLF2SJ-0.10R5%2.W | INSTOCK | 2,000 | ||||
| 10R 5% 2W | INSTOCK | 1,845 | ||||
| MIC29152WT | INSTOCK | 207 | ||||
| MS3452W20-14PW | Amphenol Corporation | INSTOCK RoHS : Not Compliant | 1 | |||
![]() Avnet Abacus | LNJ852W83RA | Panasonic Electronic Components | LED UniColor Orange 630nm 2Pin Chip LED (Alt: LNJ852W83RA) RoHS : Compliant | 0 | ||
| NPI52W471MTRF | NIC Components Corp | - Tape and Reel (Alt: NPI52W471MTRF) RoHS : Compliant | 0 | |||
| 3252W-1-503LF | Bourns Inc | (Alt: 3252W-1-503LF) RoHS : Compliant | 0 | |||
| NPI52W220MTRF | NIC Components Corp | - Tape and Reel (Alt: NPI52W220MTRF) RoHS : Compliant | 0 | |||
| NPI52W151MTRF | NIC Components Corp | - Tape and Reel (Alt: NPI52W151MTRF) RoHS : Compliant | 0 | |||
| NPI52W1R5MTRF | NIC Components Corp | - Tape and Reel (Alt: NPI52W1R5MTRF) RoHS : Compliant | 0 | |||
| 3252W-1-202LF | Bourns Inc | (Alt: 3252W-1-202LF) RoHS : Not Compliant | 0 | |||
| 3252W-1-104LF | Bourns Inc | (Alt: 3252W-1-104LF) RoHS : Not Compliant | 0 | |||
| NPI52W3R3MTRF | NIC Components Corp | - Tape and Reel (Alt: NPI52W3R3MTRF) RoHS : Compliant | 0 | |||
| 3252W-1-100LF | Bourns Inc | (Alt: 3252W-1-100LF) RoHS : Compliant | 0 | |||
| 3352W-1-102LF | Bourns Inc | (Alt: 3352W-1-102LF) RoHS : Not Compliant | 0 | |||
| R752W42205000K | KEMET Corporation | Power Film Capacitor 22 uF 230 V 400 V 10 Metallized PP Radial Box 2 Pin Through Hole (Alt: R752W42205000K) RoHS : Compliant | 0 | |||
| ERZ1EM152W20OT | Aihua Technology Group Co Ltd | (Alt: ERZ1EM152W20OT) RoHS : Compliant | 0 | |||
| R752W4220AA00K | KEMET Corporation | Power Film Capacitor 22 uF 230 V 400 V 10 Metallized PP Radial Box 2 Pin Through Hole (Alt: R752W4220AA00K) RoHS : Compliant | 0 | |||
| AS07108PO-LW152-WR-R | PUI Audio | (Alt: AS07108PO-LW152-WR-R) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 568PD1-003H31152-W | Shenzhen Derun Electronics Co Ltd | (Alt: 568PD1-003H31152-W) RoHS : Compliant | 0 | ||
| AP2552W6-7 | Diodes Incorporated | (Alt: AP2552W6-7) RoHS : Compliant | 0 | |||
| AP22652W6-7 | Diodes Incorporated | Power Load Distribution Switch, High Side, Active Low, 1 Output, 2.665 A, 0.065 ohm, SOT-26-6 (Alt: AP22652W6-7) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | NSVM1MA152WKT1G | onsemi | 80 V Dual Common Cathode Switching Diode ONSSPCDDEYG8V5J (Alt: NSVM1MA152WKT1G) RoHS : Compliant | 24,000 | ||
| MIC29152WT | Microchip Technology Inc | LDO Regulator Pos 125V to 25V 15A 5Pin TO220 (Alt: MIC29152WT) RoHS : Compliant | 50 | |||
MMBD352WT1G![]() | onsemi | 70 V Schottky Diode dual series UHF ONSSPCDDEBO6N2V (Alt: MMBD352WT1G) RoHS : Compliant | 0 | |||
| BD52W05G-CTR | ROHM Semiconductor | (Alt: BD52W05G-CTR) RoHS : Compliant | 0 | |||
| MIC29752WWT | Microchip Technology Inc | LDO Regulator Pos 125V to 26V 75A 5Pin TO247 Tube (Alt: MIC29752WWT) RoHS : Compliant | 0 | |||
M1MA152WKT1G![]() | onsemi | 80 V Dual Common Cathode Switching Diode ONSSPCDDEYG8V5J (Alt: M1MA152WKT1G) RoHS : Compliant | 0 | |||
| MIC29152WU | Microchip Technology Inc | LDO Regulator Pos 125V to 25V 15A 5Pin TO263 Tube (Alt: MIC29152WU) RoHS : Compliant | 0 | |||
| MIC37252WR | Microchip Technology Inc | LDO Regulator Pos 124 to 55V 25A 5Pin SPAK Tube (Alt: MIC37252WR) RoHS : Compliant | 0 | |||
| MIC39152WU | Microchip Technology Inc | (Alt: MIC39152WU) RoHS : Compliant | 0 | |||
| MIC37152WR | Microchip Technology Inc | LDO Regulator Pos 124V to 55V 15A 5Pin SPAK Tube (Alt: MIC37152WR) RoHS : Compliant | 0 | |||
| MIC29152WU-TR | Microchip Technology Inc | LDO Regulator Pos 125V to 25V 15A 5Pin TO263 TR (Alt: MIC29152WU-TR) RoHS : Compliant | 0 | |||
| MIC37152WR-TR | Microchip Technology Inc | LDO Regulator Pos 124V to 55V 15A 5Pin SPAK TR (Alt: MIC37152WR-TR) RoHS : Compliant | 0 | |||
MIC37252WR-TR![]() | Microchip Technology Inc | LDO Regulator Pos 124V to 55V 25A 5Pin SPAK TR (Alt: MIC37252WR-TR) RoHS : Compliant | 0 | |||
| MIC39152WU-TR | Microchip Technology Inc | 15A ADJUSTABLE VOUTUCAP LDO (Alt: MIC39152WU-TR) RoHS : Compliant | 0 | |||
MIC39152WD-TR![]() | Microchip Technology Inc | LDO Regulator Pos 124 to 155V 15A 5Pin TO252 TR (Alt: MIC39152WD-TR) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | MIC29152WU-TR | Micrel Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 217 | |
| CRCP6252WX | RCA | IN STOCK SHIP TODAY |
| 39 | ||
| CRCP252WHX | RCA | IN STOCK SHIP TODAY |
| 32 | ||
| AM1S-B2AAA02JDA52W-15 | Eaton Electrical | IN STOCK SHIP TODAY |
| 20 | ||
| JB1S-V2AB00DA52W-15 | Eaton Electrical | IN STOCK SHIP TODAY | 15 | |||
| AM1S-B9AAA02JDA52W-65 | Eaton Electrical | IN STOCK SHIP TODAY | 10 | |||
| MS3452W36-10PW | Matrix Connector | IN STOCK SHIP TODAY |
| 10 | ||
| NPI52W221MTRF | Nichicon Corporation | IN STOCK SHIP TODAY | 10 | |||
| JB1S-V2AB00DA52W-20 | Eaton Electrical | IN STOCK SHIP TODAY | 7 | |||
| AM1S-B9AAA02JDA52W-20 | Eaton Electrical | IN STOCK SHIP TODAY |
| 4 | ||
| JB1S-V2AB01DA52W | Eaton Electrical | IN STOCK SHIP TODAY |
| 4 | ||
| AM1S-A2AAA02JDA52W-20 | Eaton Electrical | IN STOCK SHIP TODAY |
| 2 | ||
| AM1S-A2AAA02JD52W-20 | Eaton Electrical | IN STOCK SHIP TODAY |
| 2 | ||
| AM1S-B2-AAA02JD-DU-52W-15 | Eaton Electrical | IN STOCK SHIP TODAY | 2 | |||
| MIC29152WU | Micrel Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
![]() DB Roberts | CIT-250-15-2W | Essentra Components | 0 | |||
![]() EBV Elektronik | MIC37152WR | Microchip Technology Inc | LDO Regulator Pos 124V to 55V 15A 5Pin SPAK Tube (Alt: MIC37152WR) RoHS : Compliant | 48 | ||
MMBD352WT1G![]() | onsemi | 70 V Schottky Diode dual series UHF ONSSPCDDEBO6N2V (Alt: MMBD352WT1G) RoHS : Compliant | 0 | |||
| MIC29752WWT | Microchip Technology Inc | LDO Regulator Pos 125V to 26V 75A 5Pin TO247 Tube (Alt: MIC29752WWT) RoHS : Compliant | 0 | |||
M1MA152WKT1G![]() | onsemi | 80 V Dual Common Cathode Switching Diode ONSSPCDDEYG8V5J (Alt: M1MA152WKT1G) RoHS : Compliant | 0 | |||
| MIC29152WU | Microchip Technology Inc | LDO Regulator Pos 125V to 25V 15A 5Pin TO263 Tube (Alt: MIC29152WU) RoHS : Compliant | 0 | |||
M1MA152WAT1G![]() | onsemi | 80 V Dual Common Anode Switching Diode ONSSPCDDEYG8V5J (Alt: M1MA152WAT1G) RoHS : Compliant | 0 | |||
| MIC29152WT | Microchip Technology Inc | LDO Regulator Pos 125V to 25V 15A 5Pin TO220 (Alt: MIC29152WT) RoHS : Compliant | 0 | |||
| MIC29152WU-TR | Microchip Technology Inc | LDO Regulator Pos 125V to 25V 15A 5Pin TO263 TR (Alt: MIC29152WU-TR) RoHS : Compliant | 0 | |||
MIC37252WR-TR![]() | Microchip Technology Inc | LDO Regulator Pos 124V to 55V 25A 5Pin SPAK TR (Alt: MIC37252WR-TR) RoHS : Compliant | 0 | |||
MIC39152WD-TR![]() | Microchip Technology Inc | LDO Regulator Pos 124 to 155V 15A 5Pin TO252 TR (Alt: MIC39152WD-TR) RoHS : Compliant | 0 | |||
MIC29152WD-TR![]() | Microchip Technology Inc | LDO Regulator Pos 125V to 25V 15A 5Pin TO252 TR (Alt: MIC29152WD-TR) RoHS : Compliant | 0 | |||
| NSVMMBD352WT1G | onsemi | 70 V Schottky Diode dual series UHF ONSSPCDDEBO6N2V (Alt: NSVMMBD352WT1G) RoHS : Compliant | 0 | |||
![]() Flip Electronics | M1MA152WAT1G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 153,000 | |
M1MA152WKT1G![]() | onsemi | Stock, Ship Today RoHS : Compliant |
| 143,550 | ||
| NSVM1MA152WAT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 129,000 | ||
| NSVM1MA152WKT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 126,000 | ||
![]() Master Electronics | 3352W-1-100LF | Bourns Inc | Res Cermet Trimmer 10 Ohm 20% 0.5W(1/2W) 1(Elec)/1(Mech)Turn (8.89 X 5.33 X 9.53mm) Pin Thru-Hole Bag RoHS : Compliant |
| 0 | |
| 3352W-1-104 | Bourns Inc | Res Cermet Trimmer 100K Ohm 20% 0.5W(1/2W) 1(Elec)/1(Mech)Turn (8.89 X 5.33 X 9.53mm) Pin Thru-Hole Bag RoHS : Not Compliant |
| 0 | ||
7108J52WQE22![]() | C&K Switches | Rocker Switch - SP On-None-Mom - 5A@120VAC/2A@250VAC - Black Concave w/Frame - Snap-in - Illuminated - Wire Wrap - Epoxy Seal RoHS : Compliant |
| 0 | ||
| MS3452W-14S-SHELL | ITT Interconnect Solutions | MS3452W-14S SHELL / 248-2632-000 / Circular RoHS : Not Compliant |
| 0 | ||
| MS3452W-24-SHELL | ITT Interconnect Solutions | MS3452W-24 SHELL / 248-2639-000 / Circular RoHS : Not Compliant |
| 0 | ||
| E32D201LPN152WD92U | United Chemi-Con Inc | Cap Alum 1.5MF 200V Screw Chas M RoHS : Compliant |
| 0 | ||
| 121659-1252-W | ITT Interconnect Solutions | KPTC0E8-2SW-D-DN; MIL-DTL 26482 Series I & Mil Bat RoHS : Not Compliant |
| 0 | ||
| PS-375-2-WT | Brady Worldwide Inc | The PS-375-2-WT is a single-sided printable B-342 polyolefin wire marking sleeve for identifying wires with gauges from 12 to 4. RoHS : Compliant |
| 0 | ||
| MS3452W28 | ITT Interconnect Solutions | MS3452W28 / 248-2640-000 / Circular RoHS : Not Compliant |
| 0 | ||
| LW7GL-M1C52W | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| MS18235-2WT | Dialight | Lamp - Cartridge Style - Cylindrical - Translucent - White - 14V Volts (Nom) RoHS : Not Compliant |
| 0 | ||
| LW6GL-M1C52W | IDEC Corporation | PUSH BUTTON ILLUMINATED RoHS : Compliant |
| 0 | ||
| LW6ML-A1C52W | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| 3252W-1-253M | Bourns Inc | Res Cermet Trimmer 25K Ohm 10% 0.75W(3/4W) 25(Elec)Turn 2.03mm (20.32 X 7.62 X 14.99mm) Pin Panel Mount/Through Hole Tube RoHS : Not Compliant |
| 0 | ||
| 3252W-1-504 | Bourns Inc | Res Cermet Trimmer 500K Ohm 10% 0.75W(3/4W) 25(Elec)Turns 2.03mm (12.7 X 5.59 X 13.59mm) Pin Thru-Hole Tube RoHS : Not Compliant |
| 0 | ||
![]() Neutron USA | 3252W-1-504 | Bourns Inc | Trimmer Resistors - Through Hole 500Kohms 1/2" Square Sealed Wire Leads RoHS : Not Compliant |
| 50 | |
| 3252W-1-503 | Bourns Inc | Trimmer Resistors - Through Hole 50Kohms 1/2" Sq Sealed Wire Leads RoHS : Not Compliant |
| 50 | ||
| 3252W-1-104LF | Bourns Inc | Trimmer Resistors - Through Hole 100K 1/2" Square Sealed Wire Leads RoHS : Compliant |
| 50 | ||
| 3252W-1-502LF | Bourns Inc | Trimmer Resistors - Through Hole 5Kohms 1/2" Square Sealed Wire Leads RoHS : Compliant |
| 50 | ||
| 3252W-1-202LF | Bourns Inc | Trimmer Resistors - Through Hole 2Kohms 1/2" Square Sealed Wire Leads RoHS : Compliant |
| 49 | ||
| 3252W-1-503LF | Bourns Inc | Trimmer Resistors - Through Hole 50Kohms 1/2" Sq Sealed Wire Leads RoHS : Compliant |
| 33 | ||
| 3252W-1-502 | Bourns Inc | Trimmer Resistors - Through Hole 5Kohms 1/2" Square Sealed Wire Leads RoHS : Not Compliant |
| 22 | ||
| LP3-F3L352W | OTTO Engineering Inc | Pushbutton Switches Flush Dome SPDT 24V Green LED RoHS : Compliant |
| 10 | ||
| LP3-R2L352W | OTTO Engineering Inc | Pushbutton Switches Raised Dome SPST 24V Green LED RoHS : Compliant |
| 10 | ||
| LP3-F3G352W | OTTO Engineering Inc | Pushbutton Switches Flush Dome SPDT 12V Red LED RoHS : Compliant |
| 10 | ||
| LP3-E3H352W | OTTO Engineering Inc | Pushbutton Switches Exposed Dome SPDT 12V Green LED RoHS : Compliant |
| 4 | ||
| POC-W152-WF0E | Advantech Co Ltd | Wireless module (802.11a/b/g/n) for POC |
| 2 | ||
| K58352WW | Kensington Computer Products Group | MAGPRO 27IN MONITOR PRIVACY SCRN 16:9 |
| 0 | ||
| EE-SX952-W 1M | OMRON Corporation | Pre-Wired Photomicrosensor, F-shp Transm, Photo IC L/D ON NPN Collector Control Output 24V 50mA, Resp f: 3 kHz, Land D 2 outputs, LED 940nm, Apt 0.8mm, d 5mm |
| 0 | ||
| K87652WW | Kensington Computer Products Group | A1020 BOOM ARM |
| 0 | ||
![]() Pasternack Enterprises US | PE3C0052/WP | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable Using LMR-240 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0052/WP can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0052/WP RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0052/WP is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 680 | ||
| PE3C0052/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 60 Inch Length Using LMR-240 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 60 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0052/WP-60 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0052/WP-60 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0052/WP-60 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C0052/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 24 Inch Length Using LMR-240 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 24 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0052/WP-24 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0052/WP-24 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0052/WP-24 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C0052/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 48 Inch Length Using LMR-240 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 48 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0052/WP-48 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0052/WP-48 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0052/WP-48 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C0052/WP-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 36 Inch Length Using LMR-240 Coax., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 36 inch length using LMR-240 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0052/WP-36 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0052/WP-36 RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C0052/WP-36 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3C3952/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C3952/WP-48 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3952/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C3952/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C3952/WP-48 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C3952/WP-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 36 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable 36 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable 36 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C3952/WP-36 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3952/WP-36 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C3952/WP-36 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C3952/WP-36 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C3952/WP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 24 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable 24 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable 24 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C3952/WP-24 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3952/WP-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C3952/WP-24 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C3952/WP-24 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C3952/WP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 60 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C3952/WP-60 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3952/WP-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C3952/WP-60 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C3952/WP-60 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C3952/WP | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C3952/WP can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3952/WP RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C3952/WP is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C3952/WP can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
![]() Venkel Ltd. | CR1225-2W-2000FT | VENKEL LTD | Chip Resistor;1225;2W;200R;�1% RoHS : Compliant | 12,000 | ||
![]() Vyrian | SN74152W | Texas Instruments | Multiplexer, 1-Func, 8 Line Input, TTL, CDFP14 RoHS : Not Compliant | 9,659 | ||
| TL052-W | Texas Instruments | Operational Amplifier | 9,574 | |||
| SNC54H52W | Texas Instruments | AND-OR Gate, 1-Func, 9-Input, TTL, CDFP14 RoHS : Not Compliant | 9,418 | |||
| SNC54LS152W | Texas Instruments | Multiplexer, 1-Func, 8 Line Input, TTL, CDFP14 RoHS : Not Compliant | 8,064 | |||
| TP3052WM | Texas Instruments | Codec RoHS : Not Compliant | 7,607 | |||
| SNJ54ALS652W | Texas Instruments | Registered Bus Transceiver, ALS Series, 1-Func, 8-Bit, True Output, TTL, CDFP24 | 7,598 | |||
| SNJ54F352W | Texas Instruments | 6,843 | ||||
| SNJ54AS652W | Texas Instruments | Registered Bus Transceiver, AS Series, 1-Func, 8-Bit, True Output, TTL, CDFP24 RoHS : Not Compliant | 6,687 | |||
| SN98252W | Texas Instruments | 6,441 | ||||
| SNC54LS352W | Texas Instruments | Multiplexer, 2-Func, 4 Line Input, TTL, CDFP16 RoHS : Not Compliant | 6,188 | |||
| SNJ54152W | Texas Instruments | Multiplexer, 1-Func, 8 Line Input, TTL, CDFP14 RoHS : Not Compliant | 5,398 | |||
| SNJ54ALVTH16652WD | Texas Instruments | Registered Bus Transceiver, 2-Func, 8-Bit, True Output, BICMOS, CDFP56 RoHS : Not Compliant | 4,003 | |||
SNJ54BCT652W![]() | Texas Instruments | Registered Bus Transceiver, BCT/FBT Series, 1-Func, 8-Bit, True Output, BICMOS, CDFP24 RoHS : Not Compliant | 3,928 | |||
| SNJ54ABT16952WD | Texas Instruments | Registered Bus Transceiver, ABT Series, 2-Func, 8-Bit, True Output, BICMOS | 3,789 | |||
SNJ54ABT16652WD![]() | Texas Instruments | Registered Bus Transceiver, ABT Series, 2-Func, 8-Bit, True Output, BICMOS, CDFP56 RoHS : Not Compliant | 3,069 | |||
![]() Win Source Electronics | MIC29152WU-TR | Microchip Technology Inc | IC REG LDO ADJ 1.5A TO263-5 / LDO Regulator Pos 1.25V to 25V 1.5A Automotive 6-Pin(5+Tab) TO-263 T/R RoHS : Compliant |
| 102,730 | |
| AP22652W6-7 | Diodes Incorporated | LOAD SWITCH,SOT26,T&R,3K RoHS : Compliant |
| 96,000 | ||
| MIC29152WU | Microchip Technology Inc | IC REG LDO ADJ 1.5A TO263-5 RoHS : Compliant |
| 13,152 | ||
| ADAU1452WBCP | Analog Devices Inc | SigmaDSP 294.912 MHz, 24-Bit Audio Processor |
| 12,000 | ||
| MIC29152WD | Micrel Inc | High-Current Low-Dropout Regulators RoHS : Compliant |
| 11,259 | ||
MIC29152WD-TR![]() | Microchip Technology Inc | LDO Regulator Pos 1.27V to 25V 1.5A Automotive 6-Pin(5+Tab) TO-252 T/R / IC REG LDO ADJ 1.5A TO252-5 RoHS : Compliant |
| 10,480 | ||
| ADAU1452WBCPZ | Analog Devices Inc | DSP Fixed-Point 32bit 294.912MHz Automotive 72-Pin LFCSP EP Tray / IC AUDIO PROCESSOR 72LFCSP RoHS : Compliant |
| 10,000 | ||
| ADAU1452WBCPZ-RL | Analog Devices Inc | IC AUDIO PROCESSOR 72LFCSP RoHS : Compliant |
| 9,400 | ||
| MIC29152WT | Microchip Technology Inc | IC REG LDO ADJ 1.5A TO220-5 RoHS : Compliant |
| 6,300 | ||
| MIC29752WWT | Microchip Technology Inc | IC REG LDO ADJ 7.5A TO247-5 RoHS : Compliant |
| 2,381 | ||
| BCM88752WB0KFSBG | Broadcom Limited |
| 700 | |||
| ADAU1452WBCPZ150 | Analog Devices Inc | 150 MHZ 32BIT SIGMADSP AUDIO PRO / RoHS : Compliant |
| 10 | ||
| ADAU1452WBCPZ150RL | Analog Devices Inc | 150 MHZ 32BIT SIGMADSP AUDIO PRO RoHS : Compliant |
| 9 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |