| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
602-37QCL-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() Pasternack Enterprises US | PE3W07602 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: F, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG187A/U, RF Cable Type: RG187, RF Cable Impedance: 75 Ohm. 75 Ohm Mini SMB Plug Right Angle to 75 Ohm F Female Bulkhead Cable Using 75 Ohm RG187 Coax. PE3W07602 is a Mini SMB plug right angle to F female bulkhead cable using RG187 coax. This Pasternack Mini SMB plug right angle to F female bulkhead cable assembly uses a 75 Ohm Mini SMB for connector 1 and a 75 Ohm F for connector 2. Mini SMB right angle to F coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug Mini SMB right angle to female F bulkhead cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE3W07602 Mini SMB plug right angle to F female bulkhead cable assembly is constructed with RG187 coax. | 372 | ||
| PE3W07360-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female Bulkhead to N Male Cable 24 Inch Length Using RG142 Coax., Radio frequency assembly N female bulkhead to N male cable 24 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to N male cable 24 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a type N cable connection on the other. Our type N to type N cable assembly has a female gender on end 1 and a male on end 2. PE3W07360-24 can also be known as a type N jack to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W07360-24 RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our bulkhead type N female to type N male cable has a maximum VSWR of 1.5:1. Type N jack to type N plug cable assembly PE3W07360-24 is built with RG142 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the clamp/solder attachment method and a brass body with nickel plating, while the other has the crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W07360-24 can also be used in the other direction and will be a type N male to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N RF cable assembly as per your requirements. |
| 233 | ||
| PE3C9602-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, RF Cable Part Number: SPP-375-LLPL, RF Cable Type: SPP-375-LLPL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Plenum N Male to N Female Low PIM Cable 60 Inch Length Using SPP-375-LLPL Coax., Radio frequency assembly plenum N male to N female low PIM cable 60 inch length using SPP-375-LLPL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The plenum N male to N female low PIM cable 60 inch length using SPP-375-LLPL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low PIM type N to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C9602-60 can also be known as a low PIM type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This corrugated RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and Microporous PTFE dielectric type. The minimum bend radius for this cable is 1.25 inches, allowing for a single bend without damaging the cable. Our PE3C9602-60 RF cable has a FEP jacket of 0.402-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The corrugated RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 100 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C9602-60 is built with SPP-375-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder/solder attachment method. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C9602-60 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low PIM type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low PIM RF cable assembly as per your requirements. |
| 74 | ||
| PE3FCA360-25M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 5.6 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 8-Fiber SC UPC to SC UPC, OM3 Multimode Distribution Cable, 5.6mm LSZH, 2.0mm breakout, Aqua-25M. Pasternack’s PE3FCA360-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 8-fiber cable assembly is equipped with SC/UPC to SC/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM3 fiber which is optimized for VCSEL laser sources, making it ideal for 10Gb Ethernet up to 300 meters and 40G/100G Ethernet up to 100 meters, and offers a bandwidth of 2000 MHz·km, ensuring high-speed data transmission with minimal signal loss. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA360-25M fiber optic cable with a 5.6 mm cable diameter and 42 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Whether for enterprise networks, storage area networks (SANs), or high-speed backbones, this OM3 fiber assembly guarantees outstanding network performance. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements. |
| 69 | ||
| PE3M0360-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Size: 12, Connector 1 Gender: Socket, Connector 1 Specification: MIL-DTL-38999, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Specification: MIL-STD-348, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405FL, RF Cable Type: Coax, RF Cable Specification: PE-SR405FL datasheet, RF Cable Impedance : 50 Ohm. SMPM Size 12 D38999 Contact Socket to SMA Female Cable 24 Inch Length Using PE-SR405FL Coax with HeatShrink, LF Solder. The PE3M0360-24 from Pasternack is a D38999 contact cable assembly that is built with a size 12 mini SMP socket contact connection on one end and a SMA female connector on the other. Pasternack MIL-DTL-38999 (also known as D38999 or 38999) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense/military, production environments, general use, etc. This mini SMP to SMA cable assembly is a part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. This high frequency D38999 cable assembly operates at a maximum frequency of 18 GHz. This radio frequency cable assembly can withstand temperatures ranging from -65 to 125 degrees C. Our mini SMP socket to SMA female cable has a maximum VSWR of 1.4:1. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. The PE3M0360-24 between-series RF cable has 0.78 inches of repeated minimum bend radius. Mini SMP socket to SMA female cable assembly is built with PE-SR405FL, which is a formable coax type. The Pasternack PE3M0360-24 formable cable assembly has a 50 Ohm impedance and is single shielded. Additional dimensions, specifications, and CAD drawings for this mini SMP to SMA RF cable are available on our downloadable PDF datasheet. Mini SMP socket to SMA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy high quality custom RF cable assembly products for rugged and MIL-STD designed military/defense, aerospace, outdoor and harsh environment, microwave and millimeter wave radio transmitter receiver, component inter-connection and more for RF test & measurement labs, telecom, phase stable, phase and delay matching, and other radio frequency applications can be manufactured. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements. |
| 15 | ||
| PE7602-20 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 20 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20dB RF fixed attenuator 2W, DC to 6GHz, SMA male to female, Stainless Steel. The PE7602-20 is a fixed 20 dB attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 20 dB. The Pasternack PE7602-20 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7602-20 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 20 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 12 | ||
| PE7602-5 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 5 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 5dB RF fixed attenuator 2W, DC to 6GHz, SMA male to female, Stainless Steel. The PE7602-5 is a fixed 5 dB attenuator from Pasternack. This 5 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 5 dB. The Pasternack PE7602-5 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7602-5 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 5 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE3W04602LF | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C200, RF Cable Type: PE-C200, RF Cable Impedance: 50 Ohm. N Male to N Male Cable Using PE-C200 Coax, LF Solder. PE3W04602LF is a N male to N male cable using PE-C200 coax. This Pasternack N male to N male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our male N to male N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04602LF N male to N male cable assembly is constructed with PE-C200 coax. | 0 | |||
| PE3W26026 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. Black FAKRA Jack to FAKRA Plug Cable Using LMR-100A-UF Coax. PE3W26026 is a FAKRA jack to FAKRA plug cable using LMR-100A-UF coax. This Pasternack FAKRA jack to FAKRA plug cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm FAKRA for connector 2. Our jack FAKRA to plug FAKRA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W26026 FAKRA jack to FAKRA plug cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE6029-75 | Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Connector Series: TNC, Connector Gender: Female, Minimum Frequency: DC, Maximum Frequency: 1 GHz, Impedance: 75 Ohm, Maximum Power: 0.5 Watt. 0.5 Watt RF Load Up to 1,000 MHz with 75 Ohm TNC Female Nickel Plated Brass. PE6029-75 0.5 Watts RF load (also known as termination or dummy load) has a TNC connector that is female. This Pasternack 0.5 watt TNC female load / termination is rated for a maximum frequency of 1 GHz. Our TNC female termination load is a rf load termination with a 75 Ohm impedance. This TNC load / coax terminator is manufactured with no chain. PE6029-75 0.5 watt TNC female load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our TNC female 0.5 watt termination load will ship worldwide the same day as purchased. |
| 0 | ||
| PE3C10602 | Pasternack Enterprises | 0 | ||||
| PE3C6027 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. BNC Male to N Male Right Angle Cable Using RG223 Coax., Radio frequency assembly BNC male to N male right angle cable using RG223 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male to N male right angle cable using RG223 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and right angle N type cable connection on the other. Our BNC to right angle type N cable assemblies have a male gender on end 1 and male on end 2. This BNC to type N cable is a male to male coax assembly, PE3C6027, can also be known as a BNC plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. BNC plug to type N plug cable assembly PE3C6027 is built with RG223 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 1 GHz maximum frequency BNC male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6027 can also be used in the other direction and will be right angle N type male to BNC male cable assembly if the opposite connectivity is required. BNC plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to N male right angle cable using RG223 coax. | 0 | |||
| PE3C6028-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female Bulkhead to SMB Plug Cable 36 Inch Length Using RG316 Coax., Radio frequency assembly SMA female bulkhead to SMB plug cable 36 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to SMB plug cable 36 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMB cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA bulkhead cable connection on one end and a SMB cable connection on the other. Our SMA to SMB cable assembly has a female gender on end 1 and a plug on end 2. PE3C6028-36 can also be known as a SMA jack to SMB male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3C6028-36 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our bulkhead SMA female to SMB plug cable has a maximum VSWR of 1.4:1. SMA jack to SMB male cable assembly PE3C6028-36 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C6028-36 can also be used in the other direction and will be a SMB plug to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMB male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA and SMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMB RF cable assembly as per your requirements. |
| 0 | ||
| PE3W19602 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm. Black FAKRA Jack Right Angle to SMA Male Cable Using LMR-100A-UF Coax. PE3W19602 is a FAKRA jack right angle to SMA male cable using LMR-100A-UF coax. This Pasternack FAKRA jack right angle to SMA male cable assembly uses a 50 Ohm FAKRA for connector 1 and a 50 Ohm SMA for connector 2. FAKRA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our jack FAKRA right angle to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19602 FAKRA jack right angle to SMA male cable assembly is constructed with LMR-100A-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W26024/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402AL, RF Cable Type: PE-SR402AL, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to SMA Female Cable Using PE-SR402AL Coax with HeatShrink. PE3W26024/HS is a BMA plug bulkhead to SMA female cable using PE-SR402AL coax. This Pasternack BMA plug bulkhead to SMA female cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm SMA for connector 2. Our plug BMA bulkhead to female SMA cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W26024/HS BMA plug bulkhead to SMA female cable assembly is constructed with PE-SR402AL coax. | 0 | |||
![]() Venkel Ltd. | C0603X7R160-223JNP![]() | VENKEL LTD | Chip Capacitor;0603;X7R;16V;0.022uF;�5% RoHS : Compliant | 0 | ||
| TFCR0402-16W-C-1602FT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;16K;�1% RoHS : Compliant | 0 | |||
| TFCR0402-16W-C-5602DT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�50PPM;56K ;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-3602FT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;36K ;�1% RoHS : Compliant | 0 | |||
| SMPI606020-5R6MU | VENKEL LTD | Square Miniature Power Inductor;606020;5.6uH;�20% RoHS : Compliant | 0 | |||
| CRG0201-N-5602FT | VENKEL LTD | RoHS 10/10 Green CR;0201;1/20W;56K;�1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-1602DT | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;16K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0603-16W-E-3602FT | VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;36K ;�1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-C-3602BT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�50PPM;36K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-1602DT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;16K;�0.5% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-3602CT | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;36K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-5602BT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;56K;�0.1% RoHS : Compliant | 0 | |||
| UPTF0805-10W-E-1602AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�25PPM;16K;�0.05% RoHS : Compliant | 0 | |||
| UPTF1206-8W-E-1602AT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;25PPM;16K;�0.05% RoHS : Compliant | 0 | |||
| C0201X5R160-224KNP | VENKEL LTD | Chip Capacitor;0201;X5R;16V;0.22uF;�10% RoHS : Compliant | 0 | |||
![]() Vyrian | 602EN602-6 | Honeywell Sensing And Control | Snap Acting/Limit Switch, SPDT, Momentary, 7A, 28VDC, 6.73mm, Wire Terminal, Steel Plunger Actuator, Panel Mount-threaded | 5,458 | ||
SA602AD,602![]() | NXP Semiconductors | Telecom Circuit, 1-Func, PDSO8 RoHS : Not Compliant | 4,802 | |||
| XCVM2602-1HSIVFVC1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 4,108 | |||
| XCVM2602-1LLEVFVA1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 3,511 | |||
| XCVM2602-1LLIVFVC1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 3,468 | |||
| XCVM2602-1HLEVFVC1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 3,332 | |||
| XCVM2602-1HLEVFVA1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 3,299 | |||
| XCVM2602-1HSIVFVA1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 3,118 | |||
| XCVM2602-1HSEVFVC1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 2,611 | |||
| XCVM2602-1HSEVFVA1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 2,503 | |||
| XCVM2602-1LLIVFVA1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 2,369 | |||
| XCVM2602-1LLEVFVC1760 | AMD Xilinx | Microprocessor Circuit | 2,330 | |||
| XCVM2602-1LSEVFVA1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 2,056 | |||
| XCVM2602-1HLIVFVC1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 2,005 | |||
| XCVM2602-1HLIVFVA1760 | AMD Xilinx | Microprocessor Circuit RoHS : Compliant | 1,759 | |||
![]() Win Source Electronics | AO6602 | Alpha & Omega Semiconductor | COMPLEMENTARY RoHS : Compliant |
| 90,000 | |
| B88069X1630T602 | TDK Electronics | Gas Discharge Tubes 90VDC 20kADC 20AAC 1.5pF Solder Pad SMD / GDT 90V 20% 20KA SURFACE MOUNT RoHS : Compliant |
| 49,200 | ||
AD8602DR![]() | Analog Devices Inc | Precision CMOS Single Supply Rail-to-Rail Input/Output Wideband Operational Amplifiers | IC OPAMP GP 2 CIRCUIT 8SOIC RoHS : Not Compliant |
| 30,800 | ||
| AD8602DRMZ-REEL7 | Analog Devices Inc |
| 29,550 | |||
| 0460-202-20141 | TE Connectivity | CONN PIN 20AWG NICKEL CRIMP / Pin Contact Nickel Crimp 20 AWG Power, Machined RoHS : Compliant |
| 22,356 | ||
| 0456020.ER | Littelfuse Inc | Fuse Chip 20A 125V SMD Solder Pad 10.1 X 3.12mm Ceramic T/R CSA/PSE/TUV/cULus / FUSE BOARD MNT 20A 125VAC 100VDC RoHS : Compliant |
| 20,000 | ||
| 440360-2 | TE Connectivity | CONN SKT SODIMM 124POS R/A SMD RoHS : Compliant |
| 13,200 | ||
| 74437346022 | Wurth Elektronik | FIXED IND 2.2UH 6.5A 20 MOHM SMD RoHS : Compliant |
| 6,000 | ||
| DECASMDC050F/60-2 | Littelfuse Inc | PTC Resettable Fuse 0.55A(hold) 1.1A(trip) 60VDC 10A 1W 0.1s 0.2Ohm SMD Solder Pad 2018 T/R Automotive / POLYSWITCH PTC OVP 0.55A HLD 60V RoHS : Compliant |
| 6,000 | ||
| AUIPS6021RTRL | Infineon Technologies AG | IC SW IPS 1CH HIGH SIDE DPAK-5 RoHS : Compliant |
| 6,000 | ||
| FAN6602RM6 | onsemi | PWM Controller for Flyback Converters SOT-23-6 |
| 5,000 | ||
| BUF602IDBV | Texas Instruments | High Speed Buffer Amplifier SOT-23-5 |
| 4,655 | ||
| ADL5602ARKZ-R7 | Analog Devices Inc | IC AMP HBT INGAP 4GHZ SOT89 RoHS : Compliant |
| 4,350 | ||
LMZ30602RKGR![]() | Texas Instruments | 2A SIMPLE SWITCHER Power Module with 2.95V-6V Input in QFN Package RoHS : Compliant |
| 3,000 | ||
| SA602AD,602 | Nexperia | IC MIXER 500MHZ UP CONVRT 8SO / RF Mixer IC Cellular, HF, UHF, VHF Up Converter 500MHz 8-SO |
| 2,360 | ||
![]() Wuhan P&S | FAN602FMX | onsemi | Offline Quasi-Resonant PWM Controller RoHS : Compliant |
| 15,000 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |