| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
613-AZ-RV Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() Avnet Americas | CRCW120613K0FKEA | Vishay Intertechnologies | SMD Chip Resistor, 13 kohm, ? 1%, 250 mW, 1206 [3216 Metric], Thick Film, General Purpose - Tape and Reel (Alt: CRCW120613K0FKEA) RoHS : Compliant |
| 105,000 | |
74HC595S16-13![]() | Diodes Incorporated | Shift Register, 74HC595, Serial to Parallel, Serial to Serial, 1 Element, 8 bit, SOIC, 16 Pins - Tape and Reel (Alt: 74HC595S16-13) RoHS : Compliant |
| 75,000 | ||
| CRCW120613K3FKEA | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW120613K3FKEA) RoHS : Compliant |
| 55,000 | ||
| 66361-3 | TE Connectivity | Circular Connector Contact, Multimate, Type III+, Pin, Crimp, 14 AWG, 18 AWG - Bulk (Alt: 66361-3) RoHS : Compliant |
| 22,165 | ||
| 52746-1371 | Molex | - Tape and Reel (Alt: 0527461371) RoHS : Compliant |
| 6,000 | ||
| 10025613-101LF | Amphenol Corporation | Conn Daughter Card HDR 150 POS 2mm Press Fit RA Thru-Hole - Rail/Tube (Alt: 10025613-101LF) RoHS : Compliant |
| 3,000 | ||
| PKM4613NHPILA1 | Flex Ltd | Module DC-DC 36V to 75V Input 50A 600W - Trays (Alt: PKM4613NHPILA1) RoHS : Compliant |
| 2,258 | ||
| RNC50H2613FSRE6 | Vishay Intertechnologies | - Tape and Reel (Alt: RNC50H2613FSRE6) RoHS : Not Compliant |
| 1,000 | ||
| 206613-1 | TE Connectivity | Circular Connector, Circular Industrial, CPC Series 4, Panel Mount Receptacle, 22 Contacts - Bulk (Alt: 206613-1) RoHS : Compliant |
| 138 | ||
| DA209613 | ITT Interconnect Solutions | - Bulk (Alt: DA209613) RoHS : Not Compliant |
| 100 | ||
| ATS-61350D-C1-R0 | Advanced Thermal Solutions Inc | FANSINK AEMBLY W/ MAXIGRIP ATTACHMEN - Bulk (Alt: ATS-61350D-C1-R0) RoHS : Compliant |
| 100 | ||
| ATS-61310W-C2-R0 | Advanced Thermal Solutions Inc | FANSINK AEMBLY W/ MAXIGRIP ATTACHMEN - Bulk (Alt: ATS-61310W-C2-R0) RoHS : Compliant |
| 40 | ||
| 5747461-3 | TE Connectivity | - Bag (Alt: 5747461-3) RoHS : Compliant |
| 6 | ||
| XRP7613EVB | MaxLinear Inc | 1.2A 36V Step Down High Brightness LED Driver Evaluation Board - Boxed Product (Development Kits) (Alt: XRP7613EVB) RoHS : Not Compliant |
| 3 | ||
| 1484613-2 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 1484613-2) RoHS : Not Compliant |
| 1 | ||
![]() Newark | 56134-9001 | Molex | Contact, Socket, 24-22Awg, Crimp; |Molex 56134-9001 RoHS : Compliant |
| 16,987 | |
| 2-320561-3 | TE Connectivity | Terminal, Ring Tongue, #6, Crimp, Blue; Stud Size - Metric:M3.5; Stud Size - Imperial:#6; Wire Size Awg Max:16Awg; Conductor Area Csa:1.4Mm²; Product Range:Pidg Series; Insulator Colour:Blue; Insulator Material:Nylon (Polyamide) Rohs Compliant: Yes RoHS : Compliant |
| 344 | ||
| 1613 10 | Lumberg Connect GmbH | Socket, Low Voltage, 1.05Mm; |Lumberg 1613 10 RoHS : Compliant |
| 147 | ||
| ZW-26-13-T-D-613-260 | Samtec Inc | Conn Stack Brd, 2.54Mm, 52Pos, Hdr; |Samtec, Inc. ZW-26-13-T-D-613-260 RoHS : Compliant |
| 55 | ||
| 09564527613 | HARTING Technology Group | High Density D-Sub 62Pin Angled Female With Board Locks, Pl3, 4-40Unc Screw Lock Rohs Compliant: Yes |Harting 09564527613 RoHS : Compliant |
| 38 | ||
| 09300161301 | HARTING Technology Group | Bulkhead Housing, Han 16B Insert; Heavy Duty Connector Type:Base, Bulkhead Mount; Connector Body Material:Aluminum Body; Locking Type:2 Lever; Rectangular Shell Size:16B; For Use With:Han 16B Hoods & Inserts Rohs Compliant: Yes |Harting 09300161301 RoHS : Compliant |
| 12 | ||
| 09 20 016 261300 | HARTING Technology Group | Plug, Han, 16A, (17-32); |Harting 09 20 016 261300 RoHS : Compliant |
| 7 | ||
| 09300161301 | HARTING Technology Group | Heavy Duty Housing, 16B, 2Lever/Bulkhead; |Harting 09300161301 RoHS : Compliant |
| 1 | ||
| 613 | ELK Products Inc | Battery; |Elk Products 613 RoHS : Not Compliant |
| 0 | ||
| 613 | Adafruit Industries | Weatherproof Ttl Serial Jpeg Camera With Ntsc Video And Ir Leds |Adafruit 613 RoHS : Not Compliant |
| 0 | ||
| 613 | Platt Electric | Storage Case, 17D" X 3.25W" X 7H", Blk; Carrying Case Material:Pe (Polyethylene); Case Color:Black; External Height - Imperial:3.25"; External Height - Metric:82.55Mm; External Width - Imperial:7"; External Width - Metric:177.8Mm Rohs Compliant: Na RoHS : Not Compliant |
| 0 | ||
| 613 | Greenlee Textron Inc | Vacuum, Conduit Piston; |Greenlee 613 RoHS : Not Compliant |
| 0 | ||
| 613 | American Beauty Tools | Soldering Iron Tip, Turned Down Screwdriver Style(3/16" X 2-1/4") |American Beauty Tools 613 RoHS : Not Compliant |
| 0 | ||
| 613 | Keystone Electronics Corp | Mounting Bracket, Univ, Brass; |Keystone 613 RoHS : Compliant |
| 0 | ||
| 613 | Thomas & Betts | 2 Inch To 1 Inch Threaded Reducer |Abb Thomas & Betts 613 RoHS : Not Compliant |
| 0 | ||
![]() RS | 613437N002 (6134370001) | TE Connectivity | WIRE MARKING SHRINK SLEEVES, 3:1 RATIO, POLYOLEFIN, 0.13" X 1.97", RPS SERIES |
| 5,280 | |
| 02-06-6135 (02-06-6135-C) | Molex | CRIMP TERMINAL, 24-30 AWG, BRASS, GOLD PLATED, 5A, SERIES STANDARD .062 IN |
| 4,824 | ||
| 613 | Keystone Electronics Corp | BRACKET, MOUNTING, BRASS, NICKEL, 0.032 IN., 0.39 IN., 0.453 IN., 0.375 IN. RoHS : Compliant |
| 82 | ||
| 6135.0041.0210 (6135.CBDWF150C0.0210) | Schurter Electronic Components | POWER ENTRY MODULES, AC, 6.CBDWF150C0-C6135 |
| 80 | ||
| EE-SPX613 (EESPX613) | OMRON Industrial Automation | LIQUID LEVEL SENSOR, SLOT, THROUGH BEAM, NPN, PRE-WIRED, EE-SPX SERIES |
| 39 | ||
| 6136.0137.0210 (6136.CFTBF150C0.0210) | Schurter Electronic Components | INLET WITH CIRCUIT BREAKER IEC APPLIANCE INLET C20 1 POLE SNAP IN 15A |
| 27 | ||
| 97F9613 (97F9613S) | capcom | CAPACITOR, POLYPRO METALLIZED, 35 UF, TOL 6%, 370 AC, QC, MOTOR RUN, RND |
| 25 | ||
| 1SNA179613R0100 (017961301) | TE Connectivity | BJM 16 2 POLES, ENTRELEC |
| 6 | ||
| GA2-B1-22-613-11-DE (GA2B12261311DE|GA2-B1-22-613-11-DE|GA2B12261311DE) | Carling Technologies | CIRCUIT BREAKER HYDRAULIC/MAGNETIC 2 POLE SPDT DIN RAIL MOUNT 13A DUAL LEGEND |
| 5 | ||
| D4N-6131 (D4N6131) | OMRON Industrial Automation | D4N-6131 |
| 1 | ||
| 613 | Greenlee Textron Inc | PISTON,2" CONDUIT |
| 0 | ||
| 613 | Lincoln Industrial Corporation | DRAIN, WASTE OIL |
| 0 | ||
| 613 | Adafruit Industries | WEATHERPROOF TTL SERIAL JPEG CAMERA WITH NTSC VIDEO AND IR LEDS |
| 0 | ||
| 613 | T&B Fittings | REDUCER, 2" TO 1", MALLEABLE IRON FOR USE WITH RIGID/IMC CONDUIT |
| 0 | ||
| 613 | American Beauty Tools | SOLDERING IRON TIP, TURNED DOWN SCREWDRIVER STYLE(3/16IN X 2-1/4IN) |
| 0 | ||
![]() STMicroelectronics | MPXHZ6130A6U | STMicroelectronics | 15 to 130 kPa, absolute, integrated pressure sensor RoHS : Compliant |
| 2,542 | |
L9613B013TR![]() | STMicroelectronics | Medium Speed Data interface RoHS : Compliant |
| 129 | ||
L9613B![]() | STMicroelectronics | Medium Speed Data interface RoHS : Compliant |
| 13 | ||
| TDA75613LV | STMicroelectronics | 4 x 45 W power amplifier with full I2C diagnostics, high efficiency, SSR and low voltage operation RoHS : Compliant |
| 0 | ||
![]() Microchip Technology Inc | MIC61300YML-TR | Microchip Technology Inc | Low VIN, Single Supply, 3A LDO, VDFN, Projected EOL: 2035-11-12 RoHS : Compliant |
| 7,890 | |
PIC16F1613-I/ST![]() | Microchip Technology Inc | 14-pin, 3.5KB Flash, 256 RAM, 32MHz Int. Osc, ZCD, WWDT, CRC, TSSOP, Projected EOL: 2041-01-17 RoHS : Compliant |
| 7,672 | ||
PIC16F1613-I/P![]() | Microchip Technology Inc | 14-pin, 3.5KB Flash, 256 RAM, 32MHz Int. Osc, ZCD, WWDT, CRC, PDIP, Projected EOL: 2041-01-17 RoHS : Compliant |
| 7,640 | ||
PIC16LF1613-I/ST![]() | Microchip Technology Inc | 14-pin, 3.5KB Flash, 256 RAM, Low Voltage, 32MHz Int. Osc, ZCD, WWDT, CRC, TSSOP, Projected EOL: 2041-02-28 RoHS : Compliant |
| 6,144 | ||
PIC16LF1613-I/ML![]() | Microchip Technology Inc | 14-pin, 3.5KB Flash, 256 RAM, Low Voltage, 32MHz Int. Osc, ZCD, WWDT, CRC, VQFN, Projected EOL: 2041-02-28 RoHS : Compliant |
| 6,073 | ||
PIC16LF1613-I/SL![]() | Microchip Technology Inc | 14-pin, 3.5KB Flash, 256 RAM, Low Voltage, 32MHz Int. Osc, ZCD, WWDT, CRC, SOIC, Projected EOL: 2041-02-28 RoHS : Compliant |
| 5,244 | ||
| MIC61300-10YMME-TR | Microchip Technology Inc | Low VIN, Single Supply, 3A LDO, MSOP, Projected EOL: 2041-10-19 RoHS : Compliant |
| 5,000 | ||
PIC16F1613-I/SL![]() | Microchip Technology Inc | 14-pin, 3.5KB Flash, 256 RAM, 32MHz Int. Osc, ZCD, WWDT, CRC, SOIC, Projected EOL: 2039-02-05 RoHS : Compliant |
| 3,447 | ||
| MIC61300-10YMME | Microchip Technology Inc | Low VIN, Single Supply, 3A LDO, MSOP, Projected EOL: 2035-11-08 RoHS : Compliant |
| 3,400 | ||
PIC16F1613-E/ST![]() | Microchip Technology Inc | 14-pin, 3.5KB Flash, 256 RAM, 32MHz Int. Osc, ZCD, WWDT, CRC, TSSOP, Projected EOL: 2041-01-17 RoHS : Compliant |
| 3,233 | ||
| MIC61300YMME | Microchip Technology Inc | Low VIN, Single Supply, 3A LDO, MSOP, Projected EOL: 2035-11-08 RoHS : Compliant |
| 2,500 | ||
PIC16LF1613-I/P![]() | Microchip Technology Inc | 14-pin, 3.5KB Flash, 256 RAM, Low Voltage, 32MHz Int. Osc, ZCD, WWDT, CRC, PDIP, Projected EOL: 2041-02-28 RoHS : Compliant |
| 690 | ||
| 1N3613 | Microchip Technology Inc | Std Rectifier _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 543 | ||
| DSC613RI3A-010U | Microchip Technology Inc | 3-output MEMS clock generator, 2.5x2.0mm, 6-pin, 20ppm, -40 to 85C, VFLGA, Projected EOL: 2046-09-18 RoHS : Compliant |
| 110 | ||
| ATA6613-EK | Microchip Technology Inc | ATA6613-EK, Projected EOL: |
| 18 | ||
![]() Sager | 613 | ABB Group | Conduit Fittings & Accessories |
| 0 | |
| 613 | Keystone Electronics Corp | Mounting Hardware UNI BKT BRS N PL RoHS : Compliant |
| 0 | ||
| Y6131-326-13149P00 | TE Connectivity | RECEP SHELL, JAM NUT SIZE 13, PIN, B |
| 0 | ||
| 9861316134 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| Y6131-316-13149P00 | TE Connectivity | RECEP SHELL, WALL MOUNT SIZE 13, PIN, D |
| 0 | ||
| 9861316138 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761316132 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761316136 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| ZW-16-13-G-D-846-133 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| 9761306134 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761316131 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761306138 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9861316132 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 9761306132 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| 6131-206-13149P | TE Connectivity | Circular MIL Spec Connector SHL RECP RoHS : Not Compliant |
| 0 | ||
![]() Avnet Asia | AP61300Z6-7 | Diodes Incorporated | (Alt: AP61300Z6-7) RoHS : Compliant |
| 15,000 | |
| HL7613WL01 | Halo Microelectronics | 2.5MHZ HIGH EFFICIENCY BOOST CONVERTER (Alt: HL7613WL01) RoHS : Compliant |
| 15,000 | ||
AYF336135![]() | Panasonic Electronic Components | (Alt: AYF336135) RoHS : Compliant | 5,350 | |||
| 2106135-4 | TE Connectivity | (Alt: 2106135-4) RoHS : Compliant |
| 3,000 | ||
| MFP1A100613-R180 | Eaton Corporation | (Alt: MFP1A100613-R180) RoHS : Compliant |
| 1,750 | ||
| 10167520-060613TLF | Amphenol Corporation | FCI10167520-060613TLF MTK3.0 OCP 6P VT T (Alt: 10167520-060613TLF) RoHS : Compliant |
| 1,040 | ||
| 57102-G06-13LF | Amphenol Corporation | (Alt: 57102-G06-13LF) RoHS : Compliant | 0 | |||
| 2488261-3 | TE Connectivity | LGA9324 SKT DX BACKPLATE ASSY 3 (PCB 121 (Alt: 2488261-3) RoHS : Compliant | 0 | |||
| ME1005613402101 | Amphenol Corporation | (Alt: ME1005613402101) RoHS : Compliant | 0 | |||
| X1G006131080111 | Epson Electronics America Inc | (Alt: X1G006131080111) RoHS : Compliant | 0 | |||
| LY A67F-U2CA-36-1-30-R33 | ams OSRAM Group | (Alt: LY A67F-U2CA-36-1-30-R33) RoHS : Compliant | 0 | |||
| CRCW120613R3FKEA | Vishay Intertechnologies | D25/CRCW1206 100 13R3 1% ET1 e3 (Alt: CRCW120613R3FKEA) RoHS : Compliant | 0 | |||
| B39751B2613P810 | Qualcomm RFFE Filter Products | CSSP3 CU (Alt: B39751B2613P810) RoHS : Compliant | 0 | |||
| R7F702613FABB-C#YJA | Renesas Electronics Corporation | (Alt: R7F702613FABB-C#YJA) RoHS : Compliant | 0 | |||
| RJMG021K36130ER | Amphenol Corporation | (Alt: RJMG021K36130ER) RoHS : Compliant | 0 | |||
![]() ECCO | 0580613000 | ITT Interconnect Solutions |
| 326 | ||
| 10-730186-130 | Amphenol Industrial Operations |
| 238 | |||
| 97-3101A-16-13P | Amphenol Industrial Operations |
| 163 | |||
| C10-613447-001 | Amphenol Industrial Operations |
| 100 | |||
| 0110613000 | ITT Interconnect Solutions |
| 90 | |||
| MS3100A16-13S | Amphenol Industrial Operations |
| 2 | |||
| MS3100A16-13P | Amphenol Industrial Operations |
| 2 | |||
| 97-3100A-16-13S | Amphenol Industrial Operations |
| 2 | |||
| 97-3100A-16-13P | Amphenol Industrial Operations |
| 2 | |||
![]() Pasternack Enterprises US | PE3W12561-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Male to SMA Male Right Angle Low Loss Cable 36 Inch Length Using LMR-240-UF Coax., Radio frequency assembly BNC male to SMA male right angle low loss cable 36 inch length using LMR-240-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male right angle low loss cable 36 inch length using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a right angle SMA cable connection on the other. Our low loss BNC to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W12561-36 can also be known as a low loss BNC plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12561-36 RF cable has a TPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our BNC male to right angle SMA male cable has a maximum VSWR of 1.4:1. BNC plug to SMA plug cable assembly PE3W12561-36 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has the crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12561-36 can also be used in the other direction and will be a right angle SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 2,153 | |
| PE36132 | Pasternack Enterprises | Key Specifications, Connector Series 1: F, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75, Connector Series 2: F, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75, RF Cable Part Number: RG6-CATV, RF Cable Type: RG6-CATV, RF Cable Impedance: 75. 75 Ohm F Male to 75 Ohm F Male Cable Using 75 Ohm RG6-CATV Coax. PE36132 is a F type male to F type male cable using RG6-CATV coax. This Pasternack type F male to type F male cable assembly uses a 75 Ohm type F for connector 1 and a 75 Ohm F type for connector 2. Our male type F to male type F cable assembly uses a flexible cable type that is 75 Ohm. Pasternack PE36132 type F male to type F male cable assembly is constructed with RG6-CATV coax. | 1,970 | |||
| PE36133-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 75 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm, Length, Max: 24 inches. 75 Ohm MCX Plug to 75 Ohm MCX Plug Cable 24 Inch Length Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm MCX plug to 75 Ohm MCX plug cable 24 inch length using 75 Ohm RG179 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm MCX plug to 75 Ohm MCX plug cable 24 inch length using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to MCX cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and MCX cable connection on the other. Our MCX to MCX cable assembly has plug gender on end 1 and plug on end 2. PE36133-24 can also be known as a MCX male to MCX male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. MCX male to MCX male cable assembly PE36133-24 is built with RG179 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to MCX cable connectors, has a 75 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this PE36133-24 RF cable are available on our downloadable PDF datasheet. MCX male to MCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to MCX cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX RF cable assembly as per your requirements. |
| 838 | ||
| PE3961-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 36 inches. SMA Male to SMA Female Bulkhead Cable 36 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMA male to SMA female bulkhead cable 36 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead cable 36 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3961-36, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3961-36 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3961-36 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead cable 36 inch length using PE-SR405FL coax. |
| 410 | ||
| PE3MSA00661-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TRB 3-Lug, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 78 Ohm, Connector 2 Series: Blunt Cut, Connector 2 Gender: Genderless, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: TWC-124-2, RF Cable Type: TWC-124-2, RF Cable Impedance: 124 Ohm, Length, Max: 36 inches. TRB 3-Lug Jack to Blunt Cut Genderless 1553 Cable 36 Inch Length Using 124 Ohm TWC-124-2 Coax., Radio frequency assembly TRB 3-Lug jack to blunt cut genderless 1553 cable 36 inch length using 124 Ohm TWC-124-2 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-STD-1553 coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TRB 3-Lug jack to blunt cut genderless 1553 cable 36 inch length using 124 Ohm TWC-124-2 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TRB 3-Lug to blunt cut cable assembly orders will ship same day as well. Pasternack RF twinax 1553 cable assembly is built with TRB 3-Lug cable connection on one end and blunt cut cable connection on the other. Our 1553 TRB 3-Lug to blunt cut cable assemblies have a jack gender on end 1 and genderless on end 2. PE3MSA00661-36 can also be known as a MIL-STD-1553 1553 TRB 3-Lug female to blunt cut genderless cable assembly and will be shipped same-day as it is purchased. TRB 3-Lug female to blunt cut genderless cable assembly PE3MSA00661-36 is built with TWC-124-2 which is a flexible twinax type. The Pasternack flexible TRB 3-Lug cable assembly is manufactured with TRB 3-Lug to blunt cut cable connectors, has a 78 Ohm impedance. RF specs on this MIL-STD-1553 500 MHz maximum frequency TRB 3-Lug jack to blunt cut genderless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3MSA00661-36 can also be used in the other direction and will be blunt cut genderless to TRB 3-Lug jack cable assembly if the opposite connectivity is required. 1553 TRB 3-Lug female to blunt cut genderless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TRB 3-Lug to blunt cut cable assembly for quick shipment worldwide. Variations of TRB 3-Lug cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TRB 3-Lug jack to blunt cut genderless 1553 cable 36 inch length using 124 Ohm TWC-124-2 coax. |
| 17 | ||
| PE3W06133 | Pasternack Enterprises | Key Specifications, Connector Series 1: SHV, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. SHV Plug to N Female Cable Using RG393 Coax. PE3W06133 is a SHV plug to N female cable using RG393 coax. This Pasternack SHV plug to N female cable assembly uses a 50 Ohm SHV for connector 1 and a 50 Ohm N for connector 2. Our plug SHV to female N cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06133 SHV plug to N female cable assembly is constructed with RG393 coax. | 0 | |||
| PE3W12613 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. SMA Male to 2.4mm Female Cable Using PE-SR405FLJ Coax. PE3W12613 is a SMA male to 2.4mm female cable using PE-SR405FLJ coax. This Pasternack SMA male to 2.4mm female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm 2.4mm for connector 2. Our male SMA to female 2.4mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W12613 SMA male to 2.4mm female cable assembly is constructed with PE-SR405FLJ coax. | 0 | |||
| PE36130-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: MC-Card, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MC-Card, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 12 inches. MC-Card Plug Right Angle to MC-Card Plug Right Angle Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly MC-Card plug right angle to MC-Card plug right angle cable 12 inch length using RG316 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MC-Card plug right angle to MC-Card plug right angle cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MC-Card to MC-Card cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MC-Card cable connection on one end and right angle MC-Card cable connection on the other. Our right angle MC-Card to right angle MC-Card cable assemblies have a plug gender on end 1 and plug on end 2. This MC-Card to MC-Card cable is a plug to plug coax assembly, PE36130-12, can also be known as a right angle MC-Card male to right angle MC-Card male cable assembly and will be shipped same-day as it is purchased. MC-Card male to MC-Card male cable assembly PE36130-12 is built with RG316 which is a flexible coax type. The Pasternack flexible MC-Card cable assembly is manufactured with right angle MC-Card to right angle MC-Card cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this MC-Card right angle plug to MC-Card right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MC-Card right angle male to MC-Card right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MC-Card to MC-Card cable assembly for quick shipment worldwide. Variations of MC-Card cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MC-Card plug right angle to MC-Card plug right angle cable 12 inch length using RG316 coax. |
| 0 | ||
| PE36132/HS | Pasternack Enterprises | 0 | ||||
| PE36134-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: 7/16 DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG217/U, RF Cable Type: RG217, RF Cable Impedance: 50 Ohm, Length: 72 inches. 7/16 DIN Male to 7/16 DIN Male Cable 72 Inch Length Using RG217 Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male cable 72 inch length using RG217 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 7/16 DIN male to 7/16 DIN male cable 72 inch length using RG217 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 7/16 DIN cable connection on one end and 7/16 DIN cable connection on the other. Our 7/16 DIN to 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. This 7/16 DIN to 7/16 DIN cable is a male to male coax assembly, PE36134-72, can also be known as a 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE36134-72 is built with RG217 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 7/16 DIN male to 7/16 DIN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to 7/16 DIN male cable 72 inch length using RG217 coax. |
| 0 | ||
| PE34161-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length: 36 inches. N Male to N Female Bulkhead Cable 36 Inch Length Using PE-SR405AL Coax., Radio frequency assembly N male to N female bulkhead cable 36 inch length using PE-SR405AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N female bulkhead cable 36 inch length using PE-SR405AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N bulkhead cable connection on the other. Our N type to type N cable assemblies have a male gender on end 1 and female on end 2. This N type to type N cable is a male to female coax assembly, PE34161-36, can also be known as a type N plug to type N jack cable assembly and will be shipped same-day as it is purchased. Type N plug to N type jack cable assembly PE34161-36 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this N type male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34161-36 can also be used in the other direction and will be type N female bulkhead to N type male cable assembly if the opposite connectivity is required. N type plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N female bulkhead cable 36 inch length using PE-SR405AL coax. |
| 0 | ||
| PE34613/HS/PH270 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to TNC Male Right Angle Cable Using RG400 Coax with HeatShrink and 270 Deg. Clock. PE34613/HS/PH270 is a SMA male right angle to TNC male right angle cable using RG400 coax. This Pasternack SMA male right angle to TNC male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA right angle to TNC right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male TNC right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE34613/HS/PH270 SMA male right angle to TNC male right angle cable assembly is constructed with RG400 coax. | 0 | |||
| PE3C5613 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: Trimmed Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: PE-SR402TN, RF Cable Type: RG402 Tinned, RF Cable Impedance: 50 Ohm. SMA Female 4 Hole Flange to Trimmed Lead Cable Using Tinned RG402 Coax., Radio frequency assembly SMA female 4 hole flange to trimmed lead cable using tinned RG402 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female 4 hole flange to trimmed lead cable using tinned RG402 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to trimmed lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and trimmed lead cable connection on the other. Our SMA to trimmed lead cable assemblies have a female gender on end 1 and sexless on end 2. This SMA to trimmed lead cable is a female to sexless coax assembly, PE3C5613, can also be known as a SMA jack to trimmed lead sexless cable assembly and will be shipped same-day as it is purchased. SMA jack to trimmed lead sexless cable assembly PE3C5613 is built with RG402 tinned which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to trimmed lead cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA female 4 hole flange to trimmed lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5613 can also be used in the other direction and will be trimmed lead sexless to SMA female 4 hole flange cable assembly if the opposite connectivity is required. SMA jack 4 hole flange to trimmed lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to trimmed lead cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to trimmed lead cable using tinned RG402 coax. | 0 | |||
| PE3C6135 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. N Female to N Female Cable Using PE-P086 Coax., Radio frequency assembly N female to N female cable using PE-P086 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female to N female cable using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our type N to N type cable assemblies have a female gender on end 1 and female on end 2. This type N to N type cable is a female to female coax assembly, PE3C6135, can also be known as a type N jack to N type jack cable assembly and will be shipped same-day as it is purchased. Type N jack to type N jack cable assembly PE3C6135 is built with PE-P086 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 11 GHz maximum frequency N type female to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N jack to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to N female cable using PE-P086 coax. | 0 | |||
| PE3W03613LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm. MMCX Plug Right Angle to MMCX Plug Cable Using RG178 Coax with HeatShrink, LF Solder. PE3W03613LF/HS is a MMCX plug right angle to MMCX plug cable using RG178 coax. This Pasternack MMCX plug right angle to MMCX plug cable assembly uses a 50 Ohm MMCX for connector 1 and a 50 Ohm MMCX for connector 2. MMCX right angle to MMCX coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug MMCX right angle to plug MMCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03613LF/HS MMCX plug right angle to MMCX plug cable assembly is constructed with RG178 coax. | 0 | |||
![]() Teledyne HiRel | 5962-8761301CA | Teledyne HiRel | NAND GATE, DUAL 4-INPUT RoHS : Not Compliant | 0 | ||
| 5962-87613012A | Teledyne HiRel | NAND GATE, DUAL 4-INPUT RoHS : Not Compliant | 0 | |||
| 5962-8761301DA | Teledyne HiRel | NAND GATE, DUAL 4-INPUT RoHS : Not Compliant | 0 | |||
![]() Venkel Ltd. | UPTF0603-16W-N-2613CT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;261K ;�0.25% RoHS : Compliant | 0 | ||
| PWCR0603-UK-2613FT | VENKEL LTD | Pulse Withstanding CR;0603;1/3W;�100PPM;261K;�1% RoHS : Compliant | 0 | |||
| PWCR1210-XK-2613DT | VENKEL LTD | Pulse Withstanding CR;1210;1W;�100PPM;261K;�0.5% RoHS : Compliant | 0 | |||
| CR0805-10W-2613DT | VENKEL LTD | Chip Resistor;0805;1/10W;261K ;�0.5% RoHS : Compliant | 0 | |||
| CRS0201-20W-2613FT | VENKEL LTD | Anti-Sulfuration CR;0201;1/20W;261K ;�1% RoHS : Compliant | 0 | |||
| HPCR0402-R-2613FT | VENKEL LTD | High Power CR;0402;1/8W;261K ;�1% RoHS : Compliant | 0 | |||
| HPTF0603-SE-2613DT | VENKEL LTD | High Power Thin Film CR;0603;1/6W;�25PPM;261K ;�0.5% RoHS : Compliant | 0 | |||
| MELFC0102-YE-2613FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�25PPM;261K;�1% RoHS : Compliant | 0 | |||
| UPTF0805-10W-N-2613AT | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�10PPM;261K ;�0.05% RoHS : Compliant | 0 | |||
| TFCR0603-16W-K-2613FT | VENKEL LTD | Thin Film CR;0603;1/16W;�100PPM;261K ;�1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-3613BT | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;361K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-K-2613CT | VENKEL LTD | Thin Film CR;0805;1/8W;�100PPM;261K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-8W-C-2613BT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�50PPM;261K ;�0.1% RoHS : Compliant | 0 | |||
| TFCR1206-8W-K-2613FT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�100PPM;261K ;�1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-K-3613FT-1K | VENKEL LTD | Thin Film CR;1210;1/4W;�100PPM;361K ;�1% RoHS : Compliant | 0 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |