| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
6220ACNUNNTZCWC Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() Bisco Industries | 0462-201-1631 | TE Connectivity | RoHS : Compliant | 14,504 | ||
| 4622-0-15-15-43-27-10-0 | Mill-Max Mfg Corp | 3,480 | ||||
| 0462-201-16141 | Amphenol Cable & Interconnect Technologies | 1,800 | ||||
| 146-220247-05 | WASHERS | 85 | ||||
| 1SNK506220R0000 | ABB Group | 50 | ||||
| 175-6-220P | Wakefield-Vette | 35 | ||||
| 0462-203-12141 | TE Connectivity | RoHS : Compliant | 20 | |||
| 0462-209-16141 | TE Connectivity | RoHS : Compliant | 19 | |||
| 0462-203-08141 | TE Connectivity | RoHS : Compliant | 8 | |||
| 050-007-3196220 | ITT Interconnect Solutions | RoHS : Compliant | 4 | |||
| 0462-201-16141 | TE Connectivity | RoHS : Compliant | 2 | |||
| 18043622-01 | MISC. INDUSTRIAL HRD | 1 | ||||
| 12273176-220 | Glenair Inc | 1 | ||||
| 16220-2 | Eaton Bussmann | RoHS : Unknown | 1 | |||
| 050-010-3196220 | ITT Interconnect Solutions | 1 | ||||
![]() Ameya Holding Limited | TPS562207SDRLR | Texas Instruments | RoHS : Compliant | 450,485 | ||
TPS562209DDCT![]() | Texas Instruments | IC REG BUCK ADJ 2A SYNC SOT-23-6 RoHS : Compliant | 319,521 | |||
| TPS562202DRLR | Texas Instruments | RoHS : Compliant | 16,000 | |||
TPS62202DBVR![]() | Texas Instruments | RoHS : Compliant | 8,000 | |||
BD6220F-E2![]() | ROHM Semiconductor | 18V Max. H-bridge Drivers RoHS : Compliant |
| 5,250 | ||
| 232276362201 | NXP Semiconductors | 3,679 | ||||
TPS62200DBVT![]() | Texas Instruments | RoHS : Compliant | 1,750 | |||
TLE6220GPAUMA2![]() | Infineon Technologies AG | TLE6220GP Series 5.5 V 3 A Smart Quad Low-Side Switch - PG-DSO-20 RoHS : Compliant | 308 | |||
TPS62203DBVT![]() | Texas Instruments | SOT 23/I° /3.3-V OUTPUT, 300-MA, 95% EFFICIENT STEP-DOWN CONVERTER IN SOT-2 RoHS : Compliant | 20 | |||
![]() ComSIT USA | TPS62202DBVR![]() | Texas Instruments | AVAILABLE EU RoHS : Compliant | 1,614 | ||
![]() NexGen Digital | CAT16-220J4LF | Bourns Inc | RoHS : Compliant | 4,218 | ||
TPS62200DBVT![]() | Texas Instruments | RoHS : Compliant | 250 | |||
| ON622034-1 | Intersil Corporation | 52 | ||||
| CK06 220NF | Kyocera AVX Components | 35 | ||||
| 3131810622-0G44 | METZ CONNECT USA | RoHS : Compliant | 20 | |||
| 1-1658622-0 | TE Connectivity | RoHS : Compliant | 10 | |||
![]() PEI Genesis | 586-2206-204F | Dialight | RoHS : Compliant |
| 0 | |
| S806-220SC4-34X | SOURIAU-SUNBANK |
| 0 | |||
| 10-107622-07P | Amphenol Corporation |
| 0 | |||
| DRK262-20P | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| 430-8622-006 | ITT Interconnect Solutions |
| 0 | |||
| M85049/62-20Z | Amphenol PCD |
| 0 | |||
| A62-2018P-12 | SOURIAU-SUNBANK |
| 0 | |||
| S1462-2012-2-12 | SOURIAU-SUNBANK |
| 0 | |||
| S2071N6220-2.0-4 | SOURIAU-SUNBANK |
| 0 | |||
| 60-042622-07P | Amphenol Corporation |
| 0 | |||
| 86-220 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| M85049/62-20W | Amphenol PCD |
| 0 | |||
| M85049/62-20W | SOURIAU-SUNBANK |
| 0 | |||
| M85049/62-20WD | SOURIAU-SUNBANK |
| 0 | |||
| M85049/62-20WD | Amphenol PCD |
| 0 | |||
![]() Powell Electronics | AT62-203-12141-10 | Amphenol Sine Systems | Size 12 Socket Contact 1012AWG |
| 6,600 | |
| 10123246-22000LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 575 | ||
| 317-1006-22-00-058 | TE Connectivity | DEUTSCH CONNECTOR 317-1006-22-00-058 |
| 145 | ||
| T2040162201-000 | TE Connectivity | Power Connectors RoHS : Compliant |
| 38 | ||
| T2059462201-000 | TE Connectivity | Power Connectors RoHS : Compliant |
| 30 | ||
| 75-068622-01P | Amphenol Corporation | CONNECTOR |
| 14 | ||
| 87-433622-01E | Amphenol Corporation | RECEPT |
| 8 | ||
| 15622010 | Hartmann Electronic | AERO RELAY/CONTACTOR 15622010 |
| 2 | ||
| 87-462202-98P | Amphenol Corporation | RECEPT |
| 1 | ||
| 87-462208-21S | Amphenol Corporation | RECEPT |
| 1 | ||
| 87-462202-99P | Amphenol Corporation | RECEPT |
| 1 | ||
| M85049/62-20W | Glenair Inc | SHRINK BOOT ADAPTERS RoHS : Not Compliant |
| 1 | ||
| 87-418622-01Z | Amphenol Corporation | CONNECTOR |
| 1 | ||
| 87-462208-35P | Amphenol Corporation | RECEPT |
| 1 | ||
| 88-462203-04P | Amphenol Corporation | RECEPT |
| 1 | ||
![]() Rutronik | CR16-2201-FY | ASJ Holdings Limited | RC0603 2,2K 1% 0,1W TK100 RoHS : Compliant |
| 1,520,000 | |
| CR16-2202-FY | ASJ Holdings Limited | RC0603 22K 1% 0,1W TK100 RoHS : Compliant |
| 680,000 | ||
| CR16-220-JY | ASJ Holdings Limited | RC0603 22R 5% 0,1W TK100 RoHS : Compliant |
| 440,000 | ||
| TNPW1206220KBEEA | Vishay Intertechnologies | TF1206 220K 0,1% 0,52W TK25 RoHS : Compliant |
| 90,000 | ||
| CR16-220-JL | ASJ Holdings Limited | RC0603 22R 5% 0,1W TK100 RoHS : Compliant |
| 15,100 | ||
| 6220.2300 | Schurter Electronic Components | 6220 G-Connector-Kombi 10A RoHS : Compliant |
| 250 | ||
![]() Avnet Asia | 10123246-22000LF | Amphenol Corporation | (Alt: 10123246-22000LF) RoHS : Compliant | 0 | ||
| M39006/22-0140 | Vishay Intertechnologies | (Alt: M39006/22-0140) RoHS : Compliant | 0 | |||
| 956-220-5015 | Amphenol Corporation | CONN PT-MPO INLINE KEYUO KEY UP IP67 (Alt: 956-220-5015) RoHS : Compliant | 0 | |||
| PHE450PD6220JD16R06L2 | KEMET Corporation | General Purpose Film Capacitor, Double Metallized PP, Radial Box - 2 Pin, 0.22 uF, ? 5%, 600 V, 1 kV (Alt: PHE450PD6220JD16R06L2) RoHS : Compliant | 0 | |||
| QPL6220QEVB | Qorvo | (Alt: QPL6220QEVB) RoHS : Compliant | 0 | |||
| 10106262-2001003LF | Amphenol Corporation | (Alt: 10106262-2001003LF) RoHS : Compliant | 0 | |||
| AT62-201-1631-22 | Amphenol Corporation | Size 16 female solid machined contact, 22-24AWG, gold-plated (Alt: AT62-201-1631-22) RoHS : Compliant | 0 | |||
| AP62201Z6-7 | Diodes Incorporated | (Alt: AP62201Z6-7) RoHS : Compliant | 0 | |||
| AT62-20-0144 | Amphenol Corporation | (Alt: AT62-20-0144) RoHS : Compliant | 0 | |||
| PHE450RD6220JR17L2 | KEMET Corporation | (Alt: PHE450RD6220JR17L2) RoHS : Compliant | 0 | |||
| QPL6220QSB | Qorvo | (Alt: QPL6220QSB) RoHS : Compliant | 0 | |||
| QPL6220QTR7 | Qorvo | DFN-8 / 0.1 6GHz Ultra Low-Noise LNA (Alt: QPL6220QTR7) RoHS : Compliant | 0 | |||
| 046809626220846+ | KYOCERA Corporation | (Alt: 046809626220846+) RoHS : Compliant | 0 | |||
| AT62-20-0122 | Amphenol Corporation | (Alt: AT62-20-0122) RoHS : Compliant | 0 | |||
| M39006/22-0660 | Vishay Intertechnologies | Tantalum Capacitor, 56 uF, 125 V, ? 10%, Axial Leaded, 1.8 A, 0.01 % Per 1000 Hours, 10.31 mm (Alt: M39006/22-0660) RoHS : Compliant | 0 | |||
![]() Avnet Silica | AP62200WU-7 | Diodes Incorporated | DCDC Switching Regulator Adjustable Synchronous Buck Step Down Single Output 800 mV to 7 V (Alt: AP62200WU-7) RoHS : Compliant | 573,000 | ||
| AP62201WU-7 | Diodes Incorporated | (Alt: AP62201WU-7) RoHS : Compliant | 30,000 | |||
| XC6220B331PR-G | Torex Semiconductor LTD | (Alt: XC6220B331PR-G) RoHS : Compliant | 3,000 | |||
| AP62201Z6-7 | Diodes Incorporated | (Alt: AP62201Z6-7) RoHS : Compliant | 0 | |||
LNBTVS6-220S![]() | STMicroelectronics | ESD Suppressor TVS 15KV 2Pin SMC TR (Alt: LNBTVS6-220S) RoHS : Compliant | 0 | |||
| AP62200WU-EVM | Diodes Incorporated | (Alt: AP62200WU-EVM) RoHS : Compliant | 0 | |||
| XC6220B361MR-G | Torex Semiconductor LTD | (Alt: XC6220B361MR-G) RoHS : Compliant | 0 | |||
| XC6220A331MR-G | Torex Semiconductor LTD | (Alt: XC6220A331MR-G) RoHS : Compliant | 0 | |||
| XC6220B181ER-G | Torex Semiconductor LTD | (Alt: XC6220B181ER-G) RoHS : Compliant | 0 | |||
| XC6220B12BER-G | Torex Semiconductor LTD | (Alt: XC6220B12BER-G) RoHS : Compliant | 0 | |||
| XC6220B181PR-G | Torex Semiconductor LTD | (Alt: XC6220B181PR-G) RoHS : Compliant | 0 | |||
| XC6220B28BPR-G | Torex Semiconductor LTD | (Alt: XC6220B28BPR-G) RoHS : Compliant | 0 | |||
PIC16C622-04I/SO![]() | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 35KB EPROM 33V5V 18Pin SOIC W Tube (Alt: PIC16C622-04I/SO) RoHS : Compliant | 0 | |||
| C16220_STRADELLA-16-T1-A | LEDIL | Rectangle Lens Array for LUXEON 3030 2DNFSx757G Series LEDS (Alt: C16220_STRADELLA-16-T1-A) RoHS : Compliant | 0 | |||
| SMJD-3622012F-X41500D95C057ALL | Seoul Semiconductor | DC MODULE 2X4 ZHAGA BOOK 15PACKAGE 5050LES COB22WLUMEN 3950CCT 5000K CRI705 STEP (Alt: SMJD-3622012F-X41500D95C057ALL) RoHS : Compliant | 0 | |||
![]() Chip-Germany GmbH | M39006/22-0505 | Vishay Intertechnologies | RoHS : Not Compliant | 5 | ||
![]() EBV Elektronik | S00016220057 | SIMCom | BAC BTB 6PIN PLUG RO (Alt: S00016220057) RoHS : Compliant | 0 | ||
| ASSR-V622-002E | Broadcom Limited | MOSFET Relay 375 kV 30 mA (Alt: ASSR-V622-002E) RoHS : Compliant | 0 | |||
| TB62209FG(O,EL) | Toshiba America Electronic Components | Stepper Motor Driver 5V 38Pin362Tab HSOP TR (Alt: TB62209FG(O,EL)) RoHS : Compliant | 0 | |||
| TB62206FG(O,EL) | Toshiba America Electronic Components | 2Phase Stepping Motor Driver 5V 22Pin202Tab HSOP TR (Alt: TB62206FG(O,EL)) RoHS : Compliant | 0 | |||
| TB62208FTG(O,C8,EL | Toshiba America Electronic Components | (Alt: TB62208FTG(O,C8,EL) RoHS : Compliant | 0 | |||
| C16220_STRADELLA-16-T1-A | LEDIL | Rectangle Lens Array for LUXEON 3030 2DNFSx757G Series LEDS (Alt: C16220_STRADELLA-16-T1-A) RoHS : Compliant | 0 | |||
![]() ECCO | 143-3622-000-MS | ITT Interconnect Solutions |
| 558 | ||
| 0110622000 | ITT Interconnect Solutions |
| 420 | |||
| 011-0622-000 | ITT Interconnect Solutions |
| 420 | |||
![]() FDH Electronics | 0462-209-16141 | TE Connectivity | Elec. Contact RoHS : Compliant |
| 2,471 | |
| 622-0810-020 | Corsair Electrical Connectors Inc | Connector Acc |
| 106 | ||
| 1662-202-2031 | TE Connectivity | Elec. Contact | 14 | |||
| M1006-058-6220 | Amphenol Aerospace | Connector 83723 | 6 | |||
| M83536/22-021M | Leach International Corporation | Relays & Cont | 0 | |||
| M83536/22-021M | DRI Relays Inc | Relays & Cont |
| 0 | ||
| M85049/62-20W | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M85049/62-20W | SPI Connects | Connector Acc | 0 | |||
| M85049/62-20WD | SPI Connects | Backshells & Ac | 0 | |||
| M85049/62-20WD | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M39016/22-014P | TE Connectivity | Relays RoHS : Not Compliant | 0 | |||
| 1205-476-2209 | Aero-Electric Connector Inc | Shell | 0 | |||
| 1205-036-2202 | Aero-Electric Connector Inc | Shell | 0 | |||
| M85049/62-20A | Amphenol PCD | Backshells & Ac |
| 0 | ||
| M85049/62-20A | SPI Connects | Backshells & Ac | 0 | |||
![]() Maritex | RCA06220RFLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA06220RFLF; HKR |
| 299,600 | |
| RCA06220KFLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA06220KFLF; HKR |
| 170,000 | ||
| RCA06220KJLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA06220KJLF; HKR |
| 144,700 | ||
| RCA06220RJLF | Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA06220RJLF; HKR |
| 135,000 | ||
| 0462-201-16141 | TE Connectivity | Multi-Purpose Contacts; 0462-201-16141; TE CONNECTIVITY; Nickel; Crimp; Nickel; Socket RoHS : Compliant |
| 25,843 | ||
| 0462-201-20141 | TE Connectivity | Multi-Purpose Contacts; 0462-201-20141; TE CONNECTIVITY; Nickel; Crimp; Copper; Socket RoHS : Compliant |
| 13,560 | ||
TPS562200DDCR![]() | Texas Instruments | DC DC Converters; TPS562200DDCR; TEXAS INSTRUMENTS; 6; Buck; 1.1 mm; 1 RoHS : Compliant |
| 7,532 | ||
| CRCW1206220RFKTABC | Vishay Intertechnologies | Chip Resistor; SMD; 1206; 220K; 1%; 1/4W RoHS : Compliant |
| 7,258 | ||
TPS562207DRLR![]() | Texas Instruments | DC DC Converters; TPS562207DRLR; TEXAS INSTRUMENTS; 6; Buck; 1; 1.2 mm RoHS : Compliant |
| 5,293 | ||
| AP62200TWU-7 | Diodes Incorporated | DC DC Converters; AP62200TWU-7; DIODES RoHS : Compliant |
| 2,999 | ||
| 0462-203-08141 | TE Connectivity | Multi-Purpose Contacts; 0462-203-08141; TE CONNECTIVITY; Nickel; Crimp; Nickel; Cable RoHS : Compliant |
| 1,344 | ||
| RNP18-PK0406-220K | RDA Microelectronics | Inductor: wire; THT; 22uH; Ipracy: 1A; 180mOhm; 10%; 5.5x7.5mm |
| 1,000 | ||
| IW3622-00 | Dialog Semiconductor GmbH | LED Driver; AC/DC converter; CH:1; 72kHz; 45W; external MOSFET transistor; off-line; high-power; -0.3-18V; -40+150 deg.C; SMD; SOT23-6 RoHS : Compliant |
| 335 | ||
| IW3622-01 | Dialog Semiconductor GmbH | LED Driver; AC/DC converter; CH:1; 72kHz; 45W; off-line; high-power; 90-277V; -40+150 deg.C; SMD; SOT23-6 RoHS : Compliant |
| 200 | ||
| AT62-20-0122 | Amphenol Tuchel | Socket Contact #20, Stamped & Formed, 20-22 AWG, Nickel |
| 50 | ||
![]() Pasternack Enterprises US | PE3C6362-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. Fire Rated N Male to NEX10 Male Low PIM Cable 200 cm Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated N male to NEX10 male low PIM cable 200 cm length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated N male to NEX10 male low PIM cable 200 cm length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-NM-LP type N to TC-250-NX10M-LP NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-NM-LP type N cable connection on one end and TC-250-NX10M-LP NEX10 cable connection on the other. Our low PIM TC-250-NM-LP N type to TC-250-NX10M-LP NEX10 cable assemblies have a male gender on end 1 and male on end 2. This TC-250-NM-LP type N to TC-250-NX10M-LP NEX10 cable is a male to male coax assembly, PE3C6362-200CM, can also be known as a low PIM TC-250-NM-LP type N plug to TC-250-NX10M-LP NEX10 plug cable assembly and will be shipped same-day as it is purchased. TC-250-NM-LP N type plug to TC-250-NX10M-LP NEX10 plug cable assembly PE3C6362-200CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-NM-LP N cable assembly is manufactured with TC-250-NM-LP N type to TC-250-NX10M-LP NEX10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-NM-LP type N male to TC-250-NX10M-LP NEX10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6362-200CM can also be used in the other direction and will be TC-250-NX10M-LP NEX10 male to TC-250-NM-LP type N male cable assembly if the opposite connectivity is required. Low PIM TC-250-NM-LP N type plug to TC-250-NX10M-LP NEX10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-NM-LP type N to TC-250-NX10M-LP NEX10 cable assembly for quick shipment worldwide. Variations of TC-250-NM-LP type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to NEX10 male low PIM cable 200 cm length using SPF-250 coax using Times Microwave parts. |
| 129 | |
| PE3M0062-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/128-RG400-27478, RF Cable Type: M17/128-RG400, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. MIL-DTL-17 BNC Male to SMA Male Right Angle Cable 200 cm Length Using M17/128-RG400 Coax., Radio frequency assembly MIL-DTL-17 BNC male to SMA male right angle cable 200 cm length using M17/128-RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 BNC male to SMA male right angle cable 200 cm length using M17/128-RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/16-0014 BNC to M39012/56-3109 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/16-0014 BNC cable connection on one end and right angle M39012/56-3109 SMA cable connection on the other. Our M39012/16-0014 BNC to right angle M39012/56-3109 SMA cable assemblies have a male gender on end 1 and male on end 2. This M39012/16-0014 BNC to M39012/56-3109 SMA cable is a male to male coax assembly, PE3M0062-200CM, can also be known as a MIL-DTL-17/MIL-C-17 M39012/16-0014 BNC plug to right angle M39012/56-3109 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/16-0014 BNC plug to M39012/56-3109 SMA plug cable assembly PE3M0062-200CM is built with M17/128-RG400 which is a flexible coax type. The Pasternack flexible M39012/16-0014 BNC cable assembly is manufactured with M39012/16-0014 BNC to right angle M39012/56-3109 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 4 GHz maximum frequency M39012/16-0014 BNC male to M39012/56-3109 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0062-200CM can also be used in the other direction and will be right angle M39012/56-3109 SMA male to M39012/16-0014 BNC male cable assembly if the opposite connectivity is required. M39012/16-0014 BNC plug to M39012/56-3109 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/16-0014 BNC to M39012/56-3109 SMA cable assembly for quick shipment worldwide. Variations of M39012/16-0014 BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 BNC male to SMA male right angle cable 200 cm length using M17/128-RG400 coax. |
| 86 | ||
| PE3C6220-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 12 inches. Plenum 4.3-10 Male to N Female Low PIM Cable 12 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to N female low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to N female low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-SPP250-NF-LP type N cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable is a male to female coax assembly, PE3C6220-12, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly PE3C6220-12 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-SPP250-NF-LP N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6220-12 can also be used in the other direction and will be TC-SPP250-NF-LP type N female to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to N female low PIM cable 12 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 84 | ||
| PE3C6220-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Plenum 4.3-10 Male to N Female Low PIM Cable 100 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to N female low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to N female low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-SPP250-NF-LP N type cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable is a male to female coax assembly, PE3C6220-100CM, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP N type jack cable assembly PE3C6220-100CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-SPP250-NF-LP type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6220-100CM can also be used in the other direction and will be TC-SPP250-NF-LP type N female to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to N female low PIM cable 100 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 84 | ||
| PE3C6220-36 | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 36 inches. Plenum 4.3-10 Male to N Female Low PIM Cable 36 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to N female low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to N female low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-SPP250-NF-LP type N cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable assemblies have a male gender on end 1 and female on end 2. This TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable is a male to female coax assembly, PE3C6220-36, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP N type jack cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly PE3C6220-36 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-SPP250-NF-LP type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6220-36 can also be used in the other direction and will be TC-SPP250-NF-LP N type female to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to N female low PIM cable 36 inch length using SPP-250-LLPL coax using Times Microwave parts. |
| 84 | ||
| PE3C6220-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 78.7402 inches. Plenum 4.3-10 Male to N Female Low PIM Cable 200 cm Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to N female low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to N female low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-SPP250-NF-LP N type cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assemblies have a male gender on end 1 and female on end 2. This TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable is a male to female coax assembly, PE3C6220-200CM, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP N type jack cable assembly PE3C6220-200CM is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-SPP250-NF-LP type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6220-200CM can also be used in the other direction and will be TC-SPP250-NF-LP type N female to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to N female low PIM cable 200 cm length using SPP-250-LLPL coax using Times Microwave parts. |
| 84 | ||
| PEWAN062-20ELNF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi gain, End Launch N Female connector. The PEWAN062-20ELNF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features a type N female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with a type N female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PEWAN062-20ELNF waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 7.5 inches, a width of 3.04 inches, and a weight of 0.46 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 24 | ||
| PEWAN062-20NF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi gain, N Female connector. The PEWAN062-20NF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features a type N female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with a type N female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PEWAN062-20NF waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 7.81 inches, a width of 3.04 inches, and a weight of 0.45 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 23 | ||
| PE3WAN062-20SF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi Gain, SMA Female Connector with Weather Resistant Radome Cover. The PE3WAN062-20SF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a weather-resistant radome cover and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features an SMA female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with an SMA female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE3WAN062-20SF waveguide horn antenna with a weather-resistant radome cover has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 7.5 inches, a width of 3.04 inches, and a weight of 0.4 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 2 | ||
| PEWAN062-20NM | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi gain, N Male connector. The PEWAN062-20NM standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features a type N male connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with a type N male input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PEWAN062-20NM waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 7.81 inches, a width of 3.04 inches, and a weight of 0.45 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N male interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 2 | ||
| PE3C7862-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. 2.2-5 Male Right Angle to 2.2-5 Female Bulkhead Low PIM Cable 200 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 200 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 200 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 2.2-5 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 2.2-5 cable connection on one end and 2.2-5 bulkhead cable connection on the other. Our low PIM right angle 2.2-5 to 2.2-5 cable assemblies have a male gender on end 1 and female on end 2. This 2.2-5 to 2.2-5 cable is a male to female coax assembly, PE3C7862-200CM, can also be known as a low PIM right angle 2.2-5 plug to 2.2-5 jack cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 2.2-5 jack cable assembly PE3C7862-200CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with right angle 2.2-5 to 2.2-5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 right angle male to 2.2-5 female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7862-200CM can also be used in the other direction and will be 2.2-5 female bulkhead to right angle 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 right angle plug to 2.2-5 jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 200 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C2162-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Male to N Female Bulkhead Low Loss Cable 200 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly SMA male to N female bulkhead low loss cable 200 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to N female bulkhead low loss cable 200 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N bulkhead cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to N type cable is a male to female coax assembly, PE3C2162-200CM, can also be known as a low loss SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE3C2162-200CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2162-200CM can also be used in the other direction and will be N type female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead low loss cable 200 cm length using PE-P142LL coax, RoHS. |
| 0 | ||
| PE1WAN062-20SF | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi gain, SMA Female connector, Integrated Cage-Style Mount. The PE1WAN062-20SF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features an SMA female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with an SMA female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE1WAN062-20SF waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 12.22 inches, a width of 7.76 inches, and a weight of 1.08 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE3C8262-200CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. 4.3-10 Male Right Angle to N Female Bulkhead Low PIM Cable 200 CM Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male right angle to N female bulkhead low PIM cable 200 cm length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male right angle to N female bulkhead low PIM cable 200 cm length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 4.3-10 cable connection on one end and N type bulkhead cable connection on the other. Our low PIM right angle 4.3-10 to type N cable assemblies have a male gender on end 1 and female on end 2. This 4.3-10 to N type cable is a male to female coax assembly, PE3C8262-200CM, can also be known as a low PIM right angle 4.3-10 plug to type N jack cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to type N jack cable assembly PE3C8262-200CM is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with right angle 4.3-10 to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 right angle male to N type female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8262-200CM can also be used in the other direction and will be type N female bulkhead to right angle 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 right angle plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to type N cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male right angle to N female bulkhead low PIM cable 200 cm length using TFT-402 coax using Times Microwave components. |
| 0 | ||
| PE1WAN062-20 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz, Beam Width V: 17.3, Beam Width H: 17.5. WR-62 Waveguide Antenna, 12.4 GHz to 18 GHz Frequency Range, 20 dBi Gain,, Integrated Cage-Style Mount. Pasternack’s PE1WAN062-20 WR-62 waveguide horn is also known as a waveguide horn antenna. This WR-62 waveguide antenna has a nominal gain of 20 dBi. Our waveguide horn can operate at frequencies ranging from 12.4 to 18 GHz. The antenna with linear polarization has a typical VSWR of 1.3:1 and is suitable for test and measurement industries. This 20 dBi waveguide horn from Pasternack has an overall length of 4.72 inches, a width of 4.72 inches, and a weight of 0.98 lbs. Our WR-62 waveguide horn antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. Our antenna comes with a None square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-62 antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
![]() TE Connectivity | ER16220RJT | TE Connectivity | ER16 220R 5% AMMO PACK Resistance Value: 220 Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 11 W Through-Hole Resistor | 220 Ω Wire Wound Power Resistor 5 % | Part Number: ER16220RJT | Internal Number: 2-1623748-8 | TE Connectivity RoHS : Compliant |
| 1,500 | |
| 1SNG622020R0000 | TE Connectivity | EP-SIG-SZ25-GR-A Cable Gland Product Type: Cable Gland Cable Gland & Accessory Style: Snap-In Primary Product Material: PA 6 Clamping Diameter Range: 8 – 17 mm Primary Product Color: Gray Cable Gland Snap-In PA 6 8 – 17 mm | Snap-In Type Plastic Cable Gland | Part Number: 1SNG622020R0000 | Internal Number: 1SNG622020R0000 | Gray | TE Connectivity RoHS : Compliant |
| 475 | ||
| SBCHE6220RJ | TE Connectivity | BCHE 7 W 220R 5% Resistance Value: 220 Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 7 W Wirewound Resistor: Vertical Mount | 220 Ω Wire Wound Power Resistor 5 % | Part Number: SBCHE6220RJ | Internal Number: 2-1623732-1 | Alias Number: SBCHE6220RJF | TE Connectivity RoHS : Compliant |
| 373 | ||
| T2120062201-001 | TE Connectivity | HK2/4-006-F Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 6 Wire Size: 6 – 8 AWG Wire Size: 10 – 16 mm² Socket Insert for Contacts 6 6 – 8 AWG | Rectangular Contact Insert | Part Number: T2120062201-001 | Internal Number: T2120062201-001 | TE Connectivity RoHS : Compliant |
| 134 | ||
| T2050962201-007 | TE Connectivity | HEEE-048-F 49-96 Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 48 Wire Size: 26 – 12 AWG Wire Size: .14 – 4 mm² Socket Insert for Contacts 48 26 – 12 AWG | Hdc Heee Insert Series & Rail Compliant | Part Number: T2050962201-007 | Internal Number: T2050962201-007 | TE Connectivity RoHS : Compliant |
| 60 | ||
| 1SNG622026R0000 | TE Connectivity | EP-SIG-SZ32-GR-A Cable Gland Product Type: Cable Gland Cable Gland & Accessory Style: Snap-In Primary Product Material: PA 6 Clamping Diameter Range: 11 – 21 mm Primary Product Color: Gray Cable Gland Snap-In PA 6 11 – 21 mm | Snap-In Type Plastic Cable Gland | Part Number: 1SNG622026R0000 | Internal Number: 1SNG622026R0000 | Gray | TE Connectivity RoHS : Compliant |
| 57 | ||
| FN9262-2-07 | TE Connectivity | FN9262-2-07 Current Rating (Max): 2 A Filtering Requirements: Filtered Leakage Current (Max) (250VAC, 50Hz): 180 µA Output Termination Type: Litz Wire Leakage Current (Max) (120VAC, 60Hz): 310 µA Fn9262 Power Entry Module With Emc Filter – High-Performance Fused Solution | 2 A Filtered 180 µA Litz Wire | Part Number: FN9262-2-07 | Internal Number: 822589-SF | TE Connectivity RoHS : Compliant |
| 54 | ||
| 1SNG622017R0000 | TE Connectivity | EP-SIG-SZ20-GR-D Cable Gland Product Type: Cable Gland Cable Gland & Accessory Style: Snap-In Primary Product Material: PA 6 Clamping Diameter Range: 7 – 13 mm Primary Product Color: Gray Cable Gland Snap-In PA 6 7 – 13 mm | Snap-In Type Plastic Cable Gland | Part Number: 1SNG622017R0000 | Internal Number: 1SNG622017R0000 | Gray | TE Connectivity RoHS : Compliant |
| 52 | ||
| T2010162201-000 | TE Connectivity | HA-016-F Contact Type: Socket Rectangular Connector Insert Type: Contact Insert Pole Configuration: 16+PE Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Socket Contact Insert 16+PE 14 – 20 AWG | Rectangular Contact Insert | Part Number: T2010162201-000 | Internal Number: T2010162201-000 | TE Connectivity RoHS : Compliant |
| 36 | ||
| T2040062201-000 | TE Connectivity | HE-006-F Contact Type: Socket Rectangular Connector Insert Type: Contact Insert Pole Configuration: 6+PE Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Socket Contact Insert 6+PE 14 – 20 AWG | Rectangular Contact Insert | Part Number: T2040062201-000 | Internal Number: T2040062201-000 | TE Connectivity RoHS : Compliant |
| 27 | ||
| FN9262-2-06 | TE Connectivity | FN9262-2-06 Current Rating (Max): 2 A Filtering Requirements: Filtered Leakage Current (Max) (250VAC, 50Hz): 180 µA Output Termination Type: FASTON Ground Choke Option: No Fn9262 Power Entry Module With Emc Filter – High-Performance Fused Solution | 2 A Filtered 180 µA FASTON | Part Number: FN9262-2-06 | Internal Number: 819941-SF | TE Connectivity RoHS : Compliant |
| 14 | ||
| T2100062201-000 | TE Connectivity | HK4/2-006-F Contact Type: Socket Rectangular Connector Insert Type: Contact Insert Pole Configuration: 6 Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Socket Contact Insert 6 14 – 20 AWG | Rectangular Contact Insert | Part Number: T2100062201-000 | Internal Number: T2100062201-000 | TE Connectivity RoHS : Compliant |
| 9 | ||
| T2050462201-007 | TE Connectivity | HEE-046-F Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 46 Wire Size: 26 – 12 AWG Wire Size: .14 – 4 mm² Socket Insert for Contacts 46 26 – 12 AWG | Hdc Hee Insert Series & Rail Compliant | Part Number: T2050462201-007 | Internal Number: T2050462201-007 | TE Connectivity RoHS : Compliant |
| 6 | ||
| T2040162201-000 | TE Connectivity | HE-016-F Contact Type: Socket Rectangular Connector Insert Type: Contact Insert Pole Configuration: 16+PE Wire Size: 14 – 20 AWG Wire Size: .5 – 2.5 mm² Socket Contact Insert 16+PE 14 – 20 AWG | Rectangular Contact Insert | Part Number: T2040162201-000 | Internal Number: T2040162201-000 | TE Connectivity RoHS : Compliant |
| 5 | ||
| T2060062201-000 | TE Connectivity | HSB-006-F Contact Type: Socket Rectangular Connector Insert Type: Contact Insert Pole Configuration: 6+PE Wire Size: 15 – 10 AWG Contact Current Rating (Max): 35 A Socket Contact Insert 6+PE 15 – 10 AWG | Rectangular Contact Insert | Part Number: T2060062201-000 | Internal Number: T2060062201-000 | TE Connectivity RoHS : Compliant |
| 5 | ||
![]() Teledyne HiRel | 5962-8762201EA | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE RoHS : Not Compliant | 0 | ||
| 5962-87622012A | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE RoHS : Not Compliant | 0 | |||
| 5962-8762201FA | Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE RoHS : Not Compliant | 0 | |||
![]() Waytek, Inc. | AT62-201-16141 | Amphenol Sine Systems | AT/AHD-9 Female Nickel Socket CONTACT 16-20GA SIZE 16 Solid 0462-201-16141 Alt# 38194 |
| 209,214 | |
| AT62-209-16141 | Amphenol Sine Systems | AT/AHD-9 Female Nickel Socket Contact 14GA SIZE 16 Solid 0462-209-16141 |
| 120,189 | ||
| AT62-203-12141 | Amphenol Sine Systems | ATP/AHD-6 Female Nickel Socket Contact 14-12GA Size 12 Solid 0462-203-12141 |
| 44,842 | ||
| AT62-201-20141 | Amphenol Sine Systems | ATM Female Nickel Socket Contact 22-20GA Size 20 Solid 634 0462-201-20141 Size Change |
| 35,328 | ||
| AT62-201-1631 | Amphenol Sine Systems | AT/AHD-9 Female Gold Socket Contact 20-16GA Size 16 Solid 0462-201-1631 |
| 21,563 | ||
| AT62-20-0122 | Amphenol Sine Systems | ATM Female Loose Socket CONTACT SIZE 20 S&F 22-16GA TOOL 636 1062-20-0122 NICKEL |
| 12,846 | ||
| AT62-203-08141 | Amphenol Sine Systems | Amphenol Sine Systems AT62-203-08141 ATHD female socket terminal is a size 8 connector socket for 10-8 Ga. wire. Built from copper alloy with nickel plating, it supports ATHD Series heavy-duty power connector assemblies. |
| 2,278 | ||
| AT62-203-04141 | Amphenol Sine Systems | Amphenol Sine Systems AT62-203-04141 ATHD female socket terminal is a size 4 connector socket for 6 gauge wire. Built from copper alloy with nickel plating, it supports ATHD Series heavy-duty power connector assemblies. |
| 1,239 | ||
| AT62-20-0122 | Amphenol Sine Systems | ATM Female Reel Socket Contact 22-16GA Size 20 S&F 4000/Reel 1062-20-0122 |
| 0 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |