 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
6401G-AE3-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
 Pasternack Enterprises US | PE3W06405-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. N Female Bulkhead to SMA Male Right Angle Cable 100 cm Length Using PE-P195 Coax., Radio frequency assembly N female bulkhead to SMA male right angle cable 100 cm length using PE-P195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N female bulkhead to SMA male right angle cable 100 cm length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N bulkhead cable connection on one end and right angle SMA cable connection on the other. Our type N to right angle SMA cable assemblies have a female gender on end 1 and male on end 2. This type N to SMA cable is a female to male coax assembly, PE3W06405-100CM, can also be known as a type N jack to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. N type jack to SMA plug cable assembly PE3W06405-100CM is built with PE-P195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 4 GHz maximum frequency type N female bulkhead to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06405-100CM can also be used in the other direction and will be right angle SMA male to type N female bulkhead cable assembly if the opposite connectivity is required. N type jack bulkhead to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to SMA male right angle cable 100 cm length using PE-P195 coax. |
| 1,867 | |
| PE3W06403 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. Mini UHF Male to N Male Right Angle Cable Using RG142 Coax., Radio frequency assembly mini UHF male to N male right angle cable using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini UHF male to N male right angle cable using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini UHF to type N cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with mini UHF cable connection on one end and right angle N type cable connection on the other. Our mini UHF to right angle type N cable assembly has male gender on end 1 and male on end 2. PE3W06403 can also be known as a mini UHF plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. Mini UHF plug to type N plug cable assembly PE3W06403 is built with RG142 which is a flexible coax type. The Pasternack flexible Mini UHF cable assembly is manufactured with mini UHF to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W06403 RF cable are available on our downloadable PDF datasheet.PE3W06403 can also be used in the other direction and will be right angle N type male to mini UHF male cable assembly if the opposite connectivity is required. Mini UHF plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini UHF to type N cable assembly for quick shipment worldwide. Variations of mini UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini UHF RF cable assembly as per your requirements. | 1,680 | |||
| PE37640/HS-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Male Right Angle to BNC Male Right Angle Low Loss Cable 60 Inch Length Using PE-P195 Coax with HeatShrink., Radio frequency assembly BNC male right angle to BNC male right angle low loss cable 60 inch length using PE-P195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male right angle to BNC male right angle low loss cable 60 inch length using PE-P195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle BNC cable connection on one end and a right angle BNC cable connection on the other. Our low loss right angle BNC to right angle BNC cable assembly has a male gender on end 1 and a male on end 2. PE37640/HS-60 can also be known as a low loss right angle BNC plug to right angle BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE37640/HS-60 RF cable has a FEP jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our right angle BNC male to right angle BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE37640/HS-60 is built with PE-P195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle BNC cable connectors, has a 50 Ohm impedance, and is triple shielded. Both the connectors have a crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC right angle plug to BNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. |
| 415 | ||
| PE3W06403-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini UHF, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. Mini UHF Male to N Male Right Angle Cable 36 Inch Length Using RG142 Coax., Radio frequency assembly mini UHF male to N male right angle cable 36 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini UHF male to N male right angle cable 36 inch length using RG142 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini UHF to N type cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with mini UHF cable connection on one end and right angle type N cable connection on the other. Our mini UHF to right angle type N cable assembly has male gender on end 1 and male on end 2. PE3W06403-36 can also be known as a mini UHF plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.000 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. Mini UHF plug to type N plug cable assembly PE3W06403-36 is built with RG142 which is a flexible coax type. The Pasternack flexible Mini UHF cable assembly is manufactured with mini UHF to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE3W06403-36 RF cable are available on our downloadable PDF datasheet.PE3W06403-36 can also be used in the other direction and will be right angle type N male to mini UHF male cable assembly if the opposite connectivity is required. Mini UHF plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini UHF to type N cable assembly for quick shipment worldwide. Variations of mini UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal Mini UHF RF cable assembly as per your requirements. |
| 336 | ||
| PE3W16640-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm, Length, Max: 36 inches. TNC Male Right Angle to N Male Cable 36 Inch Length Using 53 Ohm RG55 Coax., Radio frequency assembly TNC male right angle to N male cable 36 inch length using 53 Ohm RG55 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male right angle to N male cable 36 inch length using 53 Ohm RG55 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle TNC cable connection on one end and a type N cable connection on the other. Our right angle TNC to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W16640-36 can also be known as a right angle TNC plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. Our PE3W16640-36 RF cable has a PE jacket of 0.202-inch diameter. The flexible RF cable has a between series connection. Our right angle TNC male to type N male cable has a maximum VSWR of 1.4:1. TNC plug to type N plug cable assembly PE3W16640-36 is built with RG55 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16640-36 can also be used in the other direction and will be a type N male to right angle TNC male cable assembly if the opposite connectivity is required. TNC right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to type N RF cable assembly as per your requirements. |
| 245 | ||
| PE9640 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Impedance 2: 50 Ohm, Frequency, Min: DC, Frequency, Max: 50 GHz, Adapter Body Style: Straight, Connector Mount Method 1: Bulkhead, Connector Mount Method 2: None. Bulkhead Mount 2.4mm Female to 2.4mm Female Adapter. 2.4mm adapter PE9640 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our 2.4mm to 2.4mm adapter is a in-series coaxial adapter design. This 50 Ohm 2.4mm adapter is precision manufactured to RF components industry specifications and has a maximum frequency of 50 GHz. 2.4mm female to 2.4mm female adapter is one of the many RF components that ship same day as they are ordered. PE9640 female 2.4mm to female 2.4mm adapter has a straight body. This Pasternack straight 2.4mm coax adapter is a in-line RF adapter. Our female 2.4mm to female 2.4mm adapter PE9640 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This 2.4mm to 2.4mm radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 243 | ||
| PE37640-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length: 48 inches. BNC Male Right Angle to BNC Male Right Angle Cable 48 Inch Length Using PE-P195 Coax., Radio frequency assembly BNC male right angle to BNC male right angle cable 48 inch length using PE-P195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC male right angle to BNC male right angle cable 48 inch length using PE-P195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BNC cable connection on one end and right angle BNC cable connection on the other. Our right angle BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE37640-48, can also be known as a right angle BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE37640-48 is built with PE-P195 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle BNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 3 GHz maximum frequency BNC right angle male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to BNC male right angle cable 48 inch length using PE-P195 coax. |
| 124 | ||
| PE3C6640/SP-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P103, RF Cable Type: PE-P103, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 2.4mm Male to 2.4mm Male Cable 24 Inch Length Using PE-P103 Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable 24 inch length using PE-P103 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 24 inch length using PE-P103 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C6640/SP-24 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C6640/SP-24 is built with PE-P103 which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 50 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 24 inch length using PE-P103 coax. |
| 50 | ||
| PE7AP006-40 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.25:1, Attenuation: 40 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 40 dB Fixed Attenuator, N Male to N Female Black Anodized Aluminum Heatsink Body Rated to 5 Watts Up to 6 GHz. PE7AP006-40 is a fixed 40 dB attenuator from Pasternack. This 40dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7AP006-40 40 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 5 Watts at the stated attenuation value. Our fixed RF attenuator PE7AP006-40 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 40dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 23 | ||
| PE3C5640LF-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 2.4mm Male to 2.4mm Male Cable 12 Inch Length Using PE-SR405AL Coax, LF Solder., Radio frequency assembly 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405AL coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405AL coax, LF solder, 2.4mm cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C5640LF-12 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C5640LF-12 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 40 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 12 inch length using PE-SR405AL coax, LF solder. |
| 20 | ||
| PE7366-40 | Pasternack Enterprises | Key Specifications, Design: Fixed, Maximum Frequency: 7.5 GHz, Impedance: 50 Ohm, Power Maximum: 25 Watt, VSWR Maximum: 1.45:1, Attenuation: 40 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 40 dB Fixed Attenuator, N Male to 7/16 DIN Female Black Anodized Aluminum Heatsink Body Rated to 25 Watts Up to 7.5 GHz. PE7366-40 is a fixed 40 dB attenuator from Pasternack. This 40dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a 7/16 DIN female connector on side 2. The Pasternack PE7366-40 40 dB attenuator is rated for up to 7.5 GHz. Our microwave attenuator is rated to 25 Watts at the stated attenuation value. Our fixed RF attenuator PE7366-40 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 40dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. |
| 7 | ||
| PE3C6409 | Pasternack Enterprises | Key Specifications, Connector Series 1: 1.6/5.6, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: Straight Cut Lead, Connector Gender 2: Hermaphroditic, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, RF Cable Part Number: RG179B/U, RF Cable Type: RG179, RF Cable Impedance: 75 Ohm. 75 Ohm 1.6/5.6 Plug to Straight Cut Lead Cable Using 75 Ohm RG179 Coax., Radio frequency assembly 75 Ohm 1.6/5.6 plug to straight cut lead cable using 75 Ohm RG179 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm 1.6/5.6 plug to straight cut lead cable using 75 Ohm RG179 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.6/5.6 to straight cut lead cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 1.6/5.6 cable connection on one end and straight cut lead cable connection on the other. Our 1.6/5.6 to straight cut lead cable assemblies have a plug gender on end 1 and sexless on end 2. This 1.6/5.6 to straight cut lead cable is a plug to sexless coax assembly, PE3C6409, can also be known as a 1.6/5.6 male to straight cut lead sexless cable assembly and will be shipped same-day as it is purchased. 1.6/5.6 male to straight cut lead sexless cable assembly PE3C6409 is built with RG179 which is a flexible coax type. The Pasternack flexible 1.6/5.6 cable assembly is manufactured with 1.6/5.6 to straight cut lead cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1.6/5.6 plug to straight cut lead sexless cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6409 can also be used in the other direction and will be straight cut lead sexless to 1.6/5.6 plug cable assembly if the opposite connectivity is required. 1.6/5.6 male to straight cut lead sexless cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.6/5.6 to straight cut lead cable assembly for quick shipment worldwide. Variations of 1.6/5.6 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.6/5.6 plug to straight cut lead cable using 75 Ohm RG179 coax. | 0 | |||
| PE3W13970-640CM | Pasternack Enterprises |
| 0 | |||
| PE3W01640/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. N Female to BNC Male Cable Using PE-P195 Coax with HeatShrink. PE3W01640/HS is a N female to BNC male cable using PE-P195 coax. This Pasternack N female to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our female N to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W01640/HS N female to BNC male cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3W23640 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG55B/U, RF Cable Type: RG55, RF Cable Impedance: 53 Ohm. N Male to SC Male Cable Using 53 Ohm RG55 Coax. PE3W23640 is a N male to SC male cable using RG55 coax. This Pasternack N male to SC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm SC for connector 2. Our male N to male SC cable assembly uses a flexible cable type that is 53 Ohm. Pasternack PE3W23640 N male to SC male cable assembly is constructed with RG55 coax. | 0 | |||
 Teledyne HiRel | 5962-9056401MA | Teledyne HiRel | CONTROLLER, 8-BIT, HIGH-PERFORMANCE, WITH 16K BYTES EPROM PROGRAM MEMORY RoHS : Not Compliant | 0 | ||
| 5962-8766401RA | Teledyne HiRel | LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
5962-8506403MXA | Teledyne HiRel | MICROCONTROLLER, 8-BIT (3.5 TO 16 MHZ) RoHS : Not Compliant | 0 | |||
| 5962-8506403MMA | Teledyne HiRel | MICROCONTROLLER, 8-BIT (3.5 TO 16 MHZ) RoHS : Not Compliant | 0 | |||
| 5962-9056402MA | Teledyne HiRel | CONTROLLER, 8-BIT, HIGH=PERFORMANCE, WITH 16K BYTES EPROM PROGRAM MEMORY RoHS : Not Compliant | 0 | |||
5962-8864002EA | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS PRESETTABLE, TTL-COMPATIBLE RoHS : Not Compliant | 0 | |||
| 5962-87664012A | Teledyne HiRel | LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS, TTL-COMPATIBLE INPUTS RoHS : Not Compliant | 0 | |||
5962-88640022A | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS PRESETTABLE, TTL-COMPATIBLE RoHS : Not Compliant | 0 | |||
| 5962-8864003EA | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS PRESETTABLE, TTL-COMPATIBLE RoHS : Not Compliant | 0 | |||
5962-8506403MQA | Teledyne HiRel | MICROCONTROLLER, 8-BIT (3.5 TO 16 MHZ) RoHS : Not Compliant | 0 | |||
| 5962-9056401XA | Teledyne HiRel | CONTROLLER, 8-BIT, HIGH-PERFORMANCE, WITH 16K BYTES EPROM PROGRAM MEMORY RoHS : Not Compliant | 0 | |||
| 5962-8506401MMA | Teledyne HiRel | MICROCONTROLLER, 8-BIT (3.5 TO 12 MHZ) RoHS : Not Compliant | 0 | |||
| 5962-9056402XA | Teledyne HiRel | CONTROLLER, 8-BIT, HIGH=PERFORMANCE, WITH 16K BYTES EPROM PROGRAM MEMORY RoHS : Not Compliant | 0 | |||
| 5962-8506401MQA | Teledyne HiRel | MICROCONTROLLER, 8-BIT (3.5 TO 12 MHZ) RoHS : Not Compliant | 0 | |||
5962-8864002FA | Teledyne HiRel | BINARY COUNTER, 4-BIT SYNCHRONOUS PRESETTABLE, TTL-COMPATIBLE RoHS : Not Compliant | 0 | |||
 Venkel Ltd. | MELFC0102-YZ-4640BT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�15PPM;464R;�0.1% RoHS : Compliant | 0 | ||
| MELFM0207-XE-4640DT | VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�25PPM;464R;�0.5% RoHS : Not Compliant | 0 | |||
| UPTF0402-16W-P-4640AT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;464R;�0.05% RoHS : Compliant | 0 | |||
| UPTF0603-16W-N-2640AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�10PPM;264R;�0.05% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-2640UT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;264R;�0.01% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-4640AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;464R;�0.05% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-4640BT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;464R;�0.1% RoHS : Compliant | 0 | |||
| UPTF1206-8W-P-2640CT | VENKEL LTD | Ultra Precision Thin Film CR;1206;1/8W;5PPM;264R;�0.25% RoHS : Compliant | 0 | |||
| UPTF2010-2W-N-4640AT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�10PPM;464R;�0.05% RoHS : Compliant | 0 | |||
| HPTF0805-RN-4640DT | VENKEL LTD | High Power Thin Film CR;0805;1/8W;�10PPM;464R;�0.5% RoHS : Compliant | 0 | |||
| HPTF1206-UC-4640BT | VENKEL LTD | High Power Thin Film CR;1206;1/3W;�50PPM;464R;�0.1% RoHS : Compliant | 0 | |||
| HPTF2512-WN-4640DT | VENKEL LTD | High Power Thin Film CR;2512;3/4W;�10PPM;464R;�0.5% RoHS : Compliant | 0 | |||
| MELFC0102-UE-4640FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�25PPM;464R;�1% RoHS : Compliant | 0 | |||
| MELFC0204-TC-4640DT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�50PPM;464R;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-ZC-4640BT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�50PPM;464R;�0.1% RoHS : Compliant | 0 | |||
 Win Source Electronics | FXL6408UMX | onsemi | IC GPIO EXPANDER I2C 8B 16-UMLP / I/O Expander 8 I²C 400 kHz 16-UMLP (1.8x2.6) RoHS : Compliant |
| 320,000 | |
| IRLML6402TRPBF | Infineon Technologies AG | MOSFET P-CH 20V 3.7A SOT-23 RoHS : Compliant |
| 155,100 | ||
LMR64010XMFX/NOPB | Texas Instruments | IC REG BOOST ADJ 1A SOT23-5 RoHS : Compliant |
| 99,999 | ||
TCA6408APWR | Texas Instruments | IC I/O EXPANDER I2C 8B 16TSSOP RoHS : Compliant |
| 66,057 | ||
IRF640NSTRL | International Rectifier | RoHS : Not Compliant |
| 50,000 | ||
CC2640F128RGZT | Texas Instruments | IC RF TXRX+MCU BLUETOOTH 48VFQFN RoHS : Compliant |
| 26,860 | ||
LMP8640HVMK-H/NOPB | Texas Instruments | IC CURR SENSE 1 CIRCUIT TSOT23-6 RoHS : Compliant |
| 15,965 | ||
| SI8640BD-B-ISR | Silicon Laboratories Inc | DGTL ISO 5KV 4CH GEN PURP 16SOIC RoHS : Compliant |
| 12,030 | ||
| IRF640STRR | Vishay Huntington | MOSFET N-CH 200V 18A D2PAK |
| 5,090 | ||
| LT1790ACS6-4.096#TRM | Analog Devices Inc | Voltage References LT1790 - Micropower SOT-23 Low Dropout Reference Family RoHS : Not Compliant |
| 4,770 | ||
LT1790ACS6-4.096#TRMPBF | Linear Technology | IC VREF SERIES 4.096V SOT23-6 RoHS : Compliant |
| 4,730 | ||
| LTC6406CMS8E#PBF | Analog Devices Inc | IC ADC DRIVER 8MSOP / ADC Driver IC Data Acquisition 8-MSOP-EP RoHS : Compliant |
| 2,560 | ||
| IS43DR16640B-3DBLI-TR | Integrated Silicon Solution Inc | IC DRAM 1GBIT PARALLEL 84TWBGA RoHS : Compliant |
| 1,890 | ||
| LT8640IUDC#TRPBF | Linear Technology | IC REG BUCK ADJUSTABLE 5A 20QFN RoHS : Compliant |
| 1,760 | ||
| LTC6404IUD-1#PBF | Analog Devices Inc | IC ADC DRIVER 16QFN / ADC Driver IC Data Acquisition 16-QFN (3x3) RoHS : Compliant |
| 560 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Mexican ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
British
New Zealand