 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
7..710.. Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
 Onlinecomponents.com | 771-0065-0-00 | Hirose Electric Co Ltd | Compact Connectors for Coaxial Cable RoHS : Compliant |
| 0 | |
| 771-0102-0-00 | Hirose Electric Co Ltd | Compact Connectors for Coaxial Cable RoHS : Compliant |
| 0 | ||
| 771-0038-8-00 | Hirose Electric Co Ltd | Compact Connectors for Coaxial Cable RoHS : Compliant |
| 0 | ||
| 771-0037-5-00 | Hirose Electric Co Ltd | Compact Connectors for Coaxial Cable RoHS : Compliant |
| 0 | ||
| 771-0099-0-00 | Hirose Electric Co Ltd | Compact Connectors for Coaxial Cable RoHS : Compliant |
| 0 | ||
| 77101-SL005 | Alpha Wire | Slate - 30.48m (100ft)/Spool RoHS : Compliant |
| 0 | ||
| 771-0040-0-00 | Hirose Electric Co Ltd | Compact Connectors for Coaxial Cable RoHS : Compliant |
| 0 | ||
| 77105-SLATE-1000 | Alpha Wire | Multi-Conductor Cable - 5 Conductors - 24 AWG - 7/32 Conductor Strand - 600V - Slate Jacket - 304.8m (1000ft)/Spool. RoHS : Compliant |
| 0 | ||
| 771-0058-5-00 | Hirose Electric Co Ltd | Compact Connectors for Coaxial Cable RoHS : Compliant |
| 0 | ||
| 771-0020-2-00 | Hirose Electric Co Ltd | Connector RF Coaxial Receptacle 0Hz to 2.5GHz 50Ohm Solder Right Angle Through Hole Gold RoHS : Compliant |
| 0 | ||
| 771-0060-7-00 | Hirose Electric Co Ltd | Compact Connectors for Coaxial Cable RoHS : Compliant |
| 0 | ||
| 77101-SL001 | Alpha Wire | Multi-Conductor Cable - 12 Conductors - 24 AWG - 7/32 Conductor Strand - 600V - Slate Jacket - 304.8m (1000ft)/Spool. RoHS : Compliant |
| 0 | ||
| 771-0091-0-00 | Hirose Electric Co Ltd | Compact Connectors for Coaxial Cable RoHS : Compliant |
| 0 | ||
| 771-0014-0-55 | Hirose Electric Co Ltd | Compact Connectors for Coaxial Cable RoHS : Compliant |
| 0 | ||
| 771-0046-6-00 | Hirose Electric Co Ltd | Compact Connectors for Coaxial Cable RoHS : Compliant |
| 0 | ||
 Verical | 7710110001 | TE Connectivity | Cable Markers Printable Heat Shrink Cross-Linked Polyolefin Yellow RoHS : Compliant |
| 9,750 | |
| 771043-000 | TE Connectivity | High Performance Cable 10AWG 3.37mm Tinned Copper White 600VAC RoHS : Compliant |
| 6,842 | ||
| 7710110001 | TE Connectivity | Cable Markers Printable Heat Shrink Cross-Linked Polyolefin Yellow RoHS : Compliant |
| 2,250 | ||
| 7710.NEX.2018.195 | IMS Connector Systems Gmbh | F Flange Mount Jack |
| 250 | ||
| 7710.3517.0 | Molex | Hood Frame 180° 10 Shell Size Die Cast Zinc GWconnect® RoHS : Exempt |
| 140 | ||
| 7710.3518.0 | Molex | Connector Accessories Frame Straight Zinc Die Cast GWconnect® Bag RoHS : Exempt |
| 96 | ||
| 7710 | Keystone Electronics Corp | Standoff Round F/F 6-32-THD Ceramic RoHS : Compliant |
| 48 | ||
| 77104 SL005 | Alpha Wire | Shielded Multi-Conductor Cable Tape Modified Polyphenylene Ether 4Conductors 24AWG 4.82mm 600VAC Slate Modified Polyphenylene Ether 30.48m Spool RoHS : Compliant |
| 3 | ||
| 77103 SL005 | Alpha Wire | Shielded Multi-Conductor Cable Tape Modified Polyphenylene Ether 3Conductors 24AWG 4.49mm 600VAC Slate Modified Polyphenylene Ether 30.48m Spool RoHS : Compliant |
| 1 | ||
| 77109 SL005 | Alpha Wire | Multi Conductor Cable 22AWG Tinned Copper RoHS : Compliant |
| 1 | ||
 Avnet Americas | 577102B00000G | Boyd Corporation | - Bulk (Alt: 002504) RoHS : Compliant |
| 4,861 | |
| BFC241771005 | Vishay Intertechnologies | General Purpose Film Capacitor, Metallized PP, Radial Box - 2 Pin, 1 uF, ? 2%, 63 V, 160 V - Bulk (Alt: BFC241771005) RoHS : Compliant |
| 2,873 | ||
| ASP-217771-01 | Samtec Inc | - Tape and Reel (Alt: ASP-217771-01) RoHS : Compliant | 850 | |||
| 1527710000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 1527710000) RoHS : Compliant |
| 11 | ||
| 177-710-2-25P6J1-72MNG | Glenair Inc | - Bulk (Alt: 177-710-2-25P6J1-72MNG) RoHS : Not Compliant | 4 | |||
| 177-710-2-51P4J1-84MNG | Glenair Inc | - Bulk (Alt: 177-710-2-51P4J1-84MNG) RoHS : Not Compliant | 3 | |||
| 177-710-2-25P4J1-72LNN-429C | Glenair Inc | - Bulk (Alt: 177-710-2-25P4J1-72LNN-429C) RoHS : Not Compliant | 1 | |||
| 177-710-2-9P4J1-72LNN-429C | Glenair Inc | - Bulk (Alt: 177-710-2-9P4J1-72LNN-429C) RoHS : Not Compliant | 1 | |||
| 177-710-2-15P4J1-72LNN-429C | Glenair Inc | - Bulk (Alt: 177-710-2-15P4J1-72LNN-429C) RoHS : Not Compliant | 1 | |||
| 177-710-2-15S4J1-84MNN-429F | Glenair Inc | - Bulk (Alt: 177-710-2-15S4J1-84MNN-429F) RoHS : Not Compliant | 1 | |||
| 177-710-2-25S4J1-72LNN-429C | Glenair Inc | - Bulk (Alt: 177-710-2-25S4J1-72LNN-429C) RoHS : Not Compliant | 1 | |||
| 177-710-1-15S6K5-18MNN | Glenair Inc | - Bulk (Alt: 177-710-1-15S6K5-18MNN) RoHS : Not Compliant | 1 | |||
| 77106-14-7S6 | TE Connectivity | - Bag (Alt: 77106-14-7S6) RoHS : Compliant |
| 0 | ||
| OQ0771000000G | Amphenol Corporation | - Bulk (Alt: OQ0771000000G) RoHS : Compliant |
| 0 | ||
| 75577-1001 | Molex | - Tape and Reel (Alt: 0755771001) RoHS : Compliant | 0 | |||
 Arrow Electronics | 7710.NEX.2018.195 | IMS Connector Systems Gmbh | F Flange Mount Jack |
| 250 | |
 Newark | 2427710-3 | TE Connectivity | Conn, Pcb Hdr, 6Pos, 2Row, 1.5Mm, Smt; |Te Connectivity 2427710-3 RoHS : Compliant |
| 3,540 | |
| 1530AP 8771000 | Belden Inc | Coaxial Cable, Catv Plenum, Rg6, Steel; |Belden 1530AP 8771000 RoHS : Compliant |
| 2,000 | ||
| 6500FE 8771000 | Belden Inc | Multiconductor Cable, Shielded; |Belden 6500FE 8771000 RoHS : Compliant |
| 2,000 | ||
| 6301FE 8771000 | Belden Inc | Shielded Multiconductor Cable, 3 Conduct; |Belden 6301FE 8771000 RoHS : Compliant |
| 1,000 | ||
| 8771 060250 | Belden Inc | Shielded Multiconductor Cable, 3 Conduct; |Belden 8771 060250 RoHS : Compliant |
| 504 | ||
| 1037710000 | Weidmüller Interface GmbH & Co. KG | Terminal Block, Din Rail, 2Pos, 12Awg; No. Of Positions:2Positions; Wire Size Awg Min:26Awg; Wire Size Awg Max:12Awg; Conductor Area Csa:2.5Mm²; Wire Connection Method:Screw; Rated Current:24A; Rated Voltage:800V; No. Of Levels:1 Rohs Compliant: Yes RoHS : Compliant |
| 400 | ||
| F77-10-M | Panduit Corp | Terminal, Wire Ferrule, 18Awg, Uninsul; Wire Ferrule Type:Single Wire; Wire Size Awg Max:18Awg; Conductor Area Csa:1Mm²; Pin Length:-; Insulator Colour:-; Product Range:F Series; Overall Length:10Mm; Insulator Material:Uninsulated Rohs Compliant: Yes RoHS : Compliant |
| 328 | ||
| FMC00277-100CM | Fairview Microwave Inc | Rf - Coaxial Cable Assemblies; |Fairview Microwave FMC00277-100CM RoHS : Not Compliant |
| 136 | ||
| FMCA2677-100CM | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 3.3 Ft, 1M, Rg223; |Fairview Microwave FMCA2677-100CM RoHS : Not Compliant |
| 66 | ||
| FMCA2777-100CM | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 3.3 Ft, 1M, Rg223; |Fairview Microwave FMCA2777-100CM RoHS : Not Compliant |
| 45 | ||
| 934077102 | Hirschmann Electronics GmbH & Co Kg | Test Lead, Blue, 2M, 1Kv, 32A; |Hirschmann Test And Measurement 934077102 RoHS : Compliant |
| 11 | ||
| 934077104 | Hirschmann Electronics GmbH & Co Kg | Test Lead, Grn, 2M, 1Kv, 32A; |Hirschmann Test And Measurement 934077104 RoHS : Compliant |
| 11 | ||
| 777101-01 | NI | Tb, Cb-50Lp; |Ni/emerson 777101-01 RoHS : Compliant |
| 4 | ||
| MP771087 | SPC Multicomp | Stack 4Mm Banana Plug-Plug, Black, 59Mm; |Multicomp Pro MP771087 RoHS : Compliant |
| 2 | ||
| 65771055 | WERMA SIGNALTECHNIK GMBH + CO KG | Signal Tower, Multicolour, 15Tier, 24Vdc; |Werma 65771055 RoHS : Compliant |
| 1 | ||
 Analog Devices Inc | AD7710ANZ | Analog Devices Inc | 24-BIT SIGMA DELTA IC RoHS : Compliant |
| 3,498 | |
5962-8777101MCA | Analog Devices Inc | QUAD LOW-OFFSET/POWER IC RoHS : Not Compliant |
| 755 | ||
AD7710ARZ-REEL7 | Analog Devices Inc | 24 BIT SIGMA DELTA ADC IC RoHS : Compliant |
| 140 | ||
| ADMV7710-SX | Analog Devices Inc | Low Band PA Die Sample Pack RoHS : Compliant | 26 | |||
| AD7710ARZ | Analog Devices Inc | 24 BIT SIGMA DELTA ADC IC RoHS : Compliant |
| 20 | ||
| AD7710ARZ-REEL | Analog Devices Inc | 4 BIT SIGMA DELTA ADC IC RoHS : Compliant |
| 0 | ||
| ADMV7710CHIPS | Analog Devices Inc | Low Band PA Die RoHS : Compliant |
| 0 | ||
5962-8777101M3A | Analog Devices Inc | QUAD LOW-OFFSET/POWER IC RoHS : Not Compliant |
| 0 | ||
 RS | 79077100 | Lapp Group | EPIC H-B 10 TS M25 |
| 50 | |
| 744771002 | Wurth Elektronik | INDUCTORS, FIXED, WE-PD 1260 2.2UH 10A .008OHM RoHS : Compliant |
| 48 | ||
| 8771066 | RS Pro | M12 TO UNTERMINATED SENSOR ACTUATOR CABLE, STRAIGHT, FEMALE, 4 WAY, 5M |
| 37 | ||
| 8771022 | RS Pro | SINGLE ENDED CORDSET RIGHT ANGLE FEMALE M12 TO NO CONNECTOR 4 WIRE 6.6FT BLACK |
| 27 | ||
| 8771078 | RS Pro | SINGLE ENDED CORDSET STRAIGHT FEMALE M12 TO NO CONNECTOR 5 WIRE 6.6FT BLACK |
| 14 | ||
| 8771056 | RS Pro | M12 CONNECTOR FEMALE STRAIGHT 4W 2M |
| 14 | ||
| 21349292477100 | HARTING Technology Group | M12 D-CODE DOUBLE ENDED CABLE ASSEMBLY, 4PIN, STR MALE TO STR MALE, PUR GRN, 10M RoHS : Compliant |
| 12 | ||
| 8771044 | RS Pro | M12 FEMALE RIGHT ANGLE TO PIGTAIL CORDSET 5 WIRE 5M BLACK PVC JACKET IP67 |
| 11 | ||
| 10027710 | Lapp Group | EPIC H-B 24 DIN RAIL MOUNTING SYSTEM - UPPER PART ONLY |
| 7 | ||
| 8771038 | RS Pro | M12 CONNECTOR FEMALE ANGLED 4W 2M |
| 4 | ||
| 744771008 | Wurth Elektronik | POWER INDUCTOR, SMT, 1260, 8.2 UH, 6.25 A, .02 OHM, FIXED, WE-PD SERIES RoHS : Compliant |
| 3 | ||
| 1547710 | RS Pro | RIGHT ANGLE FEMALE 3 WAY M8 TO UNTERMINATED SENSOR ACTUATOR CABLE, 5M |
| 2 | ||
| 77105 SL005 | Alpha Wire | MULTICONDUCTOR CABLE, 77105, 24AWG, 5C, FOIL SHIELD, MP, 600V, ECOCABLE SERIES |
| 2 | ||
| 09457710051 | HARTING Technology Group | NETWORK CABLE, WT 722.50 G, CABLE LNG 10.00 M, RJ45 SERIES RoHS : Compliant |
| 1 | ||
| EKI-7710E-2C-AE | Advantech Co Ltd | 8-PORT 10/100M + 2 GBE COMBO FULL L2 MANAGED ETHERNET SWITCH, -10~60C |
| 1 | ||
 Microchip Technology Inc | PIC16C77-10/L | Microchip Technology Inc | MCU CMOS 44 LD 10MHZ 8K OTP, PLCC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 2,425 | |
PIC16F877-10E/PQ | Microchip Technology Inc | MCU CMOS 44 LD 10MHZ 8K FLASH, MQFP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 546 | ||
| PIC16F877-10E/PT | Microchip Technology Inc | MCU CMOS 44 LD 10MHZ 8K FLASH, TQFP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 115 | ||
| UZ7710 | Microchip Technology Inc | Voltage Regulator _ Mini-Stud, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UZ7710V | Microchip Technology Inc | Voltage Regulator _ Mini-Stud, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 2277100-R | Microchip Technology Inc | (OBS) ASR-8885Q SINGLE, Projected EOL: 2027-03-05 - Contact for Pricing | 0 | |||
| LX7710MDWC-V | Microchip Technology Inc | LX7710MDWC-V, Projected EOL: 2051-02-04 - Contact for Pricing RoHS : Compliant | 0 | |||
| LX7710MDWC-Q | Microchip Technology Inc | LX7710MDWC-Q, Projected EOL: 2051-02-04 - Contact for Pricing RoHS : Compliant | 0 | |||
| LX7710MDWC-ES | Microchip Technology Inc | LX7710MDWC-ES, Projected EOL: 2051-02-04 - Contact for Pricing RoHS : Compliant | 0 | |||
PIC16C77-10I/P | Microchip Technology Inc | MCU CMOS 40 LD 10MHZ 8K OTP, PDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
| PIC16C77-10I/L | Microchip Technology Inc | MCU CMOS 44 LD 10MHZ 8K OTP, PLCC, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
| PIC16F877-10E/P | Microchip Technology Inc | MCU CMOS 40 LD 10MHZ 8K FLASH, PDIP, Projected EOL: 2036-01-01 RoHS : Compliant |
| 0 | ||
| DSC6003CI2A-027.7100 | Microchip Technology Inc | MEMS OSC, LVCMOS, 27.71MHz, 25PPM, 1.8-3.3V, -40 to 85C, 3.2 x 2.5mm, VDFN, Projected EOL: 2028-10-15 - Contact for Pricing RoHS : Compliant | 0 | |||
| OX-2050-DEE-2077-100M000000 | Microchip Technology Inc | OX-2050-DEE-2077-100M000000, Projected EOL: 2051-01-21 - Contact for Pricing | 0 | |||
 Bisco Industries | 53-77-10G | BOYD Laconia | RoHS : Compliant | 3,018 | ||
| 77-10-104-13 | Southco | 855 | ||||
| 4677-1032-AL-24 | RAF Electronic Hardware | 127 | ||||
| 4577-1032-AL-6 | RAF Electronic Hardware | 112 | ||||
| 5610-477-10 | Seastrom Mfg | 100 | ||||
| MS51977-10 | Cam-Tech Industries Incorporated | 74 | ||||
| 97-77-103-11 | Southco | 48 | ||||
| NAS77-7-100 | NAS Bearings/Bushings | 29 | ||||
| 2177-1032-AL | RAF Electronic Hardware | 23 | ||||
| HL77-10 | Hi-Shear Technology Corporation | 18 | ||||
| 577102B00000G | BOYD Laconia | RoHS : Compliant | 11 | |||
| 577102B03900 | BOYD Laconia | 10 | ||||
| 4577-1032-S-1 | RAF Electronic Hardware | 6 | ||||
| 97-77-104-11 | Southco | 2 | ||||
| 90077-1052 | Molex | 1 | ||||
 Rochester Electronics | SCV7710DQR2G | onsemi | Half Bridge Based Peripheral Driver, PDSO36 RoHS : Compliant |
| 32,708 | |
BTM7710GPAUMA1 | Infineon Technologies AG | Integrated Full-Bridge Driver RoHS : Compliant |
| 79,625 | ||
| 457777-1030 | Infineon Technologies AG | Semper RoHS : Compliant |
| 1,479 | ||
| AD7710AN | Analog Devices Inc | ADC, Delta-Sigma, 24-Bit, 1 Func, 2 Channel, Serial Access, CMOS, PDIP24 RoHS : Not Compliant |
| 4 | ||
| MAX77100EWL+ | Analog Devices Inc | PWM Step-Down Converter in 1.6mm x 1.6mm | 2,400 | |||
ISO7710FQDWQ1 | Texas Instruments | Interface Circuit, CMOS, PDSO16 RoHS : Compliant |
| 120 | ||
TPS77101DGK | Texas Instruments | IC VOLT REG Adjustable 1 REG 1.5V 150mA 8-SOP Tube RoHS : Compliant |
| 7,048 | ||
5962-87710012A | Texas Instruments | Op Amp Standard 700kHz 20-LCC Tube RoHS : Not Compliant |
| 146 | ||
| ISO7710QDWQ1 | Texas Instruments | Interface Circuit, CMOS, PDSO16 RoHS : Compliant |
| 1,400 | ||
| M37710E4BFP | Renesas Electronics Corporation | Microcontroller, 16-Bit, UVPROM, MELPS7700 CPU RoHS : Not Compliant |
| 14,938 | ||
| M37710E4BFS | Renesas Electronics Corporation | Microcontroller, 16-Bit, UVPROM, MELPS7700 CPU RoHS : Not Compliant |
| 4 | ||
| M37710E8BFP | Renesas Electronics Corporation | Microcontroller, 16-Bit, UVPROM, MELPS7700 CPU RoHS : Not Compliant |
| 5 | ||
| M37710E8BFS | Renesas Electronics Corporation | Microcontroller, 16-Bit, UVPROM, MELPS7700 CPU RoHS : Not Compliant |
| 181 | ||
| M37710EFBFP#U0 | Renesas Electronics Corporation | Microcontroller, 16-Bit, UVPROM, MELPS7700 CPU RoHS : Compliant |
| 645 | ||
| LM7710/BCA | Rochester Electronics LLC | LM7710 - VOLT. COMPARATOR, DIFFERENTIAL - Dual marked (M38510/10301BCA) RoHS : Not Compliant |
| 241 | ||
 Sager | TW-18-02-G-D-177-100 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 106 | |
| 2771010 | Phoenix Contact | DIN Rail Terminal Blocks UKKB 3 RoHS : Compliant |
| 1 | ||
| 88660177100 | Qnity Laird | EMI Gaskets, Sheets, Absorbers & Shielding | 0 | |||
| V112AH0B-A9C77-100 | Carling Technologies | Littelfuse V112AH0BA9C77100 |
| 0 | ||
| D12771-000 | TE Connectivity | Rectangular MIL Spec Connectors MTCPQKT1P2PGDA RoHS : Compliant |
| 0 | ||
| 70177-1042 | OMRON Electronic Components | DIP Switches / SIP Switches SGE-1510-0-1070A 04600C-04600C | 0 | |||
| 70177-1079 | OMRON Electronic Components | DIP Switches / SIP Switches ID20,WVGA,SD,50mm,HS,X | 0 | |||
| 0417710905 | Molex | Headers & Wire Housings KK 156 Hdr Assy 15 SGold 08 Ckt RoHS : Compliant | 0 | |||
| VVE9C77-100 | Carling Technologies | Switch Hardware VVE9C77100 |
| 0 | ||
| VVF8C77-100 | Carling Technologies | Switch Hardware VVF8C77100 |
| 0 | ||
| 0389771003 | Molex | Barrier Terminal Blocks |
| 0 | ||
0423771001 | Molex | Headers & Wire Housings KK 100 Hdr Assy RA Bkwy 06 Ckt Tin RoHS : Compliant | 0 | |||
| 0417710899 | Molex | Headers & Wire Housings KK 156 Hdr Assy 15 SGold 02 Ckt |
| 0 | ||
| AD-1377-105 | TE Connectivity | Crimpers / Crimping Tools AD-1377-105 | 0 | |||
| 6-2176771-0 | TE Connectivity | RT 2B 0.33W 51K1 0.1% 25PPM 5K RL RoHS : Unknown |
| 0 | ||
 TME | 2097710 | Bossard Group | Screw; 3.5x9.5; Head: cheese head; Pozidriv; PZ2; steel; zinc |
| 7,800 | |
| 1497710000 | Weidmüller Interface GmbH & Co. KG | Tip: ring; M10; crimped; for cable; non-insulated; 10.5mm RoHS : Compliant |
| 525 | ||
| 3277.1003 | Mentor Graphics | Holder; aluminium; black; H: 39mm; L: 108mm; W: 12mm; handle |
| 94 | ||
| 017710000 | Beta Electric | Knife; 18mm; pulled out, breakable blade |
| 20 | ||
| 1771 077 10 | Technokabel SA | Wire; JZ; YSLCY-JZ; 10G1.5mm2; shielded,tinned copper braid; PVC |
| 14 | ||
| 771000-6231 | ACV | TFT display; 640x480; black; 12VDC,24VDC; 4.3"; 259.8x87.8x22.2mm |
| 1 | ||
| 1771 079 10 | Technokabel SA | Wire; JZ; YSLCY-JZ; 14G1.5mm2; shielded,tinned copper braid; PVC |
| 0 | ||
| 1771075 | Phoenix Contact | Connector: PCB terminal block; 6A; 160V; PIN: 7; spring clamp RoHS : Compliant |
| 0 | ||
| 2437710000 | Weidmüller Interface GmbH & Co. KG | Heat shrink markers; 25.4mm; white; for marking wire and cable RoHS : Compliant |
| 0 | ||
| 55507710 | Lapp Group | Straight terminal connector |
| 0 | ||
| 771000-2012-0 | ACV | Multimedia adapter; VW |
| 0 | ||
| 771000-6024 | ACV | Rear view camera; 145°; black,red; 12VDC; camera; screw,push-in |
| 0 | ||
| 771000-6065 | ACV | Rear view camera; 115°; black,red; 12VDC; camera; Ford; screw; IP67 |
| 0 | ||
| 771000-6718 | ACV | Rear view camera; 185°; white; 12VDC; 84.2x42x46.9mm; universal |
| 0 | ||
| 771094-9004 | ACV | Rear view camera; 1024x600; 150°; white; 12VDC,24VDC; 7"; NTSC |
| 0 | ||
 Ameya Holding Limited | ISO7710QDRQ1 | Texas Instruments | RoHS : Compliant | 3,004 | ||
| 5962-8771001PA | Texas Instruments | RoHS : Not Compliant | 201 | |||
| HCPL-7710 | Broadcom Limited | OPTOCOUPLER CMOS 12MBD 8-DIP RoHS : Not Compliant | 110 | |||
 ComSIT USA | PAK0077101B | STEPHEN GOULD CORPERATION | AVAILABLE EU | 17 | ||
| PKG0077102 | NEFAB PACKAGING | AVAILABLE EU | 207 | |||
| S77100A02I8T1U4 | ABLIC Inc. | AVAILABLE EU | 2,625 | |||
| XR77103ELBTR | MaxLinear Inc | AVAILABLE EU RoHS : Compliant | 3,368 | |||
ComSIT USA | HCPL7710500 | Avago Technologies | 40 NS PROPAGATION DELAY, CMOS OPTOCOUPLER Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation RoHS : Compliant | 3,000 | ||
FAN7710N | Fairchild Semiconductor Corporation | BALLAST CONTROL IC FOR COMPACT FLUORESCENT LAMP Fluorescent Light Controller, 0.8A, 57.3kHz Switching Freq-Max, PDIP8 RoHS : Not Compliant | 2,350 | |||
BTS7710G | Infineon Technologies AG | Brush DC Motor Controller, 15A, NMOS, PDSO28 RoHS : Not Compliant | 1,075 | |||
| P0S400JT7710RAA | Vitrohm Portuguesa LDA | Electronic Component RoHS : Compliant | 1,000 | |||
| 744877100 | Adolf Wuerth Gmbh & Co Kg | General Purpose Inductor, 10uH, 20%, 2 Element, SMD, 2929 RoHS : Compliant | 910 | |||
| HM7710001LFTR | bi technologies | General Purpose Inductor, 1.1uH, 20%, 1 Element, Iron-Core, SMD, 3434 RoHS : Compliant | 500 | |||
| 744771004 | Wurth Elektronik | WE-PD SMT SHIELDED POWER INDUCTOR General Purpose Inductor, 4.7uH, 20%, 1 Element, Ferrite-Core, SMD, 4747 RoHS : Compliant | 492 | |||
IDT77105L25TF | Integrated Device Technology Inc | PHY (TC-PMD) FOR 25.6 MEGA BITS PER SECOND ATM NETWORKS ATM/SONET/SDH Network Interface, 1-Func, CMOS, PQFP64 RoHS : Not Compliant | 392 | |||
| HCPL7710 | Avago Technologies | 40 NS PROPAGATION DELAY, CMOS OPTOCOUPLER Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation, 12MBps RoHS : Compliant | 200 | |||
| HCPL7710060E | Avago Technologies | 40 NS PROPAGATION DELAY, CMOS OPTOCOUPLER Logic IC Output Optocoupler, 1-Channel, 1-Element, 3750V Isolation, 12MBps RoHS : Not Compliant | 150 | |||
| 1777109V0 | Phoenix Contact | HEADER Strip Terminal Block, 12A, 1 Row(s), 1 Deck(s) RoHS : Compliant | 50 | |||
| MC7710 | Sierra Semiconductor | Electronic Component RoHS : Not Compliant | 39 | |||
| IDT77105L25TFI | Integrated Device Technology Inc | PHY (TC-PMD) FOR 25.6 MEGA BITS PER SECOND ATM NETWORKS ATM/SONET/SDH Network Interface, 1-Func, CMOS, PQFP64 RoHS : Not Compliant | 20 | |||
ISO7710FD | Texas Instruments | Interface Circuit, CMOS, PDSO8 RoHS : Compliant | 14 | |||
| 59628777101M3A | Analog Devices Inc | QUAD LOW OFFSET, LOW POWER OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 220uV Offset-Max, BIPolar, CQCC28 RoHS : Not Compliant | 13 | |||
 Interstate Connecting Components | 3117710257-1G32 | METZ CONNECT USA |
| 250 | ||
| 6500FE 8771000 | Belden Inc | 2 #22 FLRST FS FLRST NEW GEN |
| 250 | ||
| 77106-14-7S6 | TE Connectivity | HERM RECP | 0 | |||
| OQ0771000000G | Amphenol Anytek | OQ-5.0- 7P BLACK CONTACT WITH | 0 | |||
| 74977-101011LF | Amphenol FCi | 74977-101011LF-M2000 SIG HDR5R METRAL HIGH SPEED RoHS : Compliant |
| 0 | ||
| T3277100U | Amphenol Sine Systems | FEMALE RECEPTACLE METAL REAR M | 0 | |||
| 6-2176771-0 | TE Connectivity | RT 2B 0.33W 51K1 0.1% 25PPM 5K RoHS : Unknown | 0 | |||
| 23-0771-09 | Glenair Inc | Glenair | 0 | |||
| OQ1771000000G | Amphenol Anytek | OQ-5.0- 17P BLACK CONTACT WIT | 0 | |||
| 177-710-2-100P4J772MWN | Glenair Inc | HERMETIC MICRO D | 0 | |||
| 177-710-2-130S4J1-48LNN | Glenair Inc | SHIELDED MICRO-D UNTWISTED WIRE | 0 | |||
| 177-710-2-21S4J5-12LNN | Glenair Inc | 0 | ||||
| 177-710-2-21S6J5-24SNN | Glenair Inc | RoHS : Compliant | 0 | |||
| 177-710-2-25P4K5-48BNG | Glenair Inc | HERMETIC MICRO D | 0 | |||
| 177-710-2-37P6J7-18LNN | Glenair Inc | Shielded Cable Assembly Untwisted Wire RoHS : Compliant | 0 | |||
 NexGen Digital | MK2771-03S | 198 | ||||
 PEI Genesis | J1577-104-34-1 | SOURIAU-SUNBANK |
| 0 | ||
| S2905R7710AIS034-000 | SOURIAU-SUNBANK |
| 0 | |||
| S3323-77-10 | SOURIAU-SUNBANK |
| 0 | |||
| SE1FMR7710A-1.5-34 | SOURIAU-SUNBANK |
| 0 | |||
| SE30FMR7710ARS2.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| SE56FMR7710EA-34 | SOURIAU-SUNBANK |
| 0 | |||
| S3715FM-B7710A34 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FM7710E1.5RS34 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/77-10N01 | Amphenol PCD |
| 0 | |||
| M85049/77-10N01 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/77-10W02 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/77-10W02 | Amphenol PCD |
| 0 | |||
| S2306-7710-12-8 | SOURIAU-SUNBANK |
| 0 | |||
| SE16FM7710A1.5ES12 | SOURIAU-SUNBANK |
| 0 | |||
| SE9FM7710A3.0-34R | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | 1977104-3 | TE Connectivity | Switches RoHS : Compliant |
| 17,175 | |
| 65771-001LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 4,620 | ||
| 10138277-102HLF | Amphenol FCi | Cable Assembly |
| 727 | ||
| E85771-000 | TE Connectivity | Labels and Industrial Warning Signs RoHS : Compliant |
| 660 | ||
| T3277100U | Amphenol Corporation | Connector |
| 73 | ||
| TW-18-02-G-D-177-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 70 | ||
| M85049/77-10Z03 | Glenair Inc | ACCESSORIES - RFI/EMI ENVIRON ADAPTER RoHS : Compliant |
| 20 | ||
| M20-8771042 | Harwin | Headers & Wire Housings RoHS : Compliant |
| 17 | ||
| M85049/77-10W02 | Glenair Inc | ACCESSORIES - RFI/EMI ENVIRON ADAPTER RoHS : Not Compliant |
| 16 | ||
| M85049/77-10N01 | Glenair Inc | ACCESSORIES - RFI/EMI ENVIRON ADAPTER RoHS : Not Compliant |
| 15 | ||
| 934077102 | Altech Corporation | Test Lead MLS GG 200/2.5 BLUE |
| 13 | ||
| 177-710-2-15P4J5-24MNN | Glenair Inc | SHIELDED CABLE ASSEMBLY RoHS : Compliant |
| 3 | ||
| 177-710-2-31S4J7-48BNN | Glenair Inc | WIRE001 |
| 2 | ||
| 19771020 | Hartmann Electronic | AERO RELAY/CONTACTOR 19771020 |
| 2 | ||
| 177-710-1-9S6K7-24MNN | Glenair Inc | SHIELDED CABLE ASSEMBLY RoHS : Not Compliant |
| 2 | ||
 PUI | 12.87710 | 10,954 | ||||
| 4771-03TSB | 1,457 | |||||
| 4771-06TSB | 1,033 | |||||
| 4771-04HB | 1,000 | |||||
| 4771-04TSB | 995 | |||||
| 4771-06TRB | 990 | |||||
| 4771-08TRB | 700 | |||||
| 4771-07TRB | 500 | |||||
| 4771-05HB | 500 | |||||
| 4771-03HB | 469 | |||||
| 4771-02TSB | 180 | |||||
 Richardson RFPD | R192771000 | Radiall | BETWEEN SERIES ADAPT RoHS : Compliant | 0 | ||
| 1977104-3 | TE Connectivity | Switch DIP OFF ON SPST 6 Recessed Slide 0.01A 5VDC RoHS : Compliant |
| 0 | ||
| R125771000W | Radiall | In Series Adapter RoHS : Compliant | 0 | |||
| SI5335B-B07710-GMR | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 200MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| R327771000 | Radiall | RF Coaxial Connector RoHS : Not Compliant |
| 0 | ||
| AD7710ARZ-REEL | Analog Devices Inc | 2-Channel Single ADC Delta-Sigma 1.028ksps 24-bit RoHS : Compliant |
| 0 | ||
| RP327-7-100-S | Astrodyne TDI Power Supplies & EMI Filters | Bookshelf, 3-Phase Delta Dual Stage Power Line Fil RoHS : Compliant | 0 | |||
| R417710128 | Radiall | Attenuator 2GHz RoHS : Not Compliant | 0 | |||
| 677-10ABPE | Wakefield-Vette | BoardLevel Heat Sink RoHS : Compliant | 0 | |||
| 105-0771-001 | Cinch Connectivity Solutions | Conn Tip Plug PL 1 POS Solder ST Cable Mount 1 Por RoHS : Compliant | 0 | |||
| R417710118 | Radiall | Attenuator 2GHz RoHS : Not Compliant | 0 | |||
| 80337710 | HUBER+SUHNER | Cable Assembly-Coaxial 50-Ohm RoHS : Not Compliant |
| 0 | ||
| AD7710ARZ | Analog Devices Inc | 2-Channel Single ADC Delta-Sigma 1.028ksps 24-bit RoHS : Compliant |
| 0 | ||
| AD7710ARZ-REEL7 | Analog Devices Inc | 2-Channel Single ADC Delta-Sigma 1.028ksps 24-bit RoHS : Compliant |
| 0 | ||
| F727710800 | Radiall | LC SIMPLEX PC MULTIMODE ADAPTOR METALLIC ALIGNMENT RoHS : Compliant | 0 | |||
 Rutronik | Q65113A7710 | ams OSRAM Group | DISPLIX P3333 R/G/B PLCC-6 RoHS : Compliant |
| 16,000 | |
 Chip 1 Exchange | 1977104-3 | TE Connectivity | INSTOCK RoHS : Compliant | 34,056 | ||
| 7710110001- | TE Connectivity | INSTOCK | 15,600 | |||
| 65771-001LF | Amphenol Corporation | INSTOCK | 9,100 | |||
| SCI77105V | INSTOCK | 2,000 | ||||
| 744771004- | Wurth Elektronik | INSTOCK | 1,049 | |||
| 4-1437710-0 | INSTOCK | 1,035 | ||||
| 206-01771-000 | INSTOCK | 1,000 | ||||
| M67710H-E25 | Mitsubishi Electric | INSTOCK | 540 | |||
| 461-3771-01-03-16 | Cambion Electronics Ltd | INSTOCK | 416 | |||
| 74477710- | Wurth Elektronik | INSTOCK | 285 | |||
| IDT77105L25TF | INSTOCK | 82 | ||||
| XR77103ELBTR-G1R2 | MXL | INSTOCK | 50 | |||
| 691317710004- | Wurth Elektronik | INSTOCK | 19 | |||
| M67710H-E23-A | MIT | INSTOCK | 15 | |||
| AD7710 | INSTOCK | 1 | ||||
 Avnet Abacus | 989771081 | Molex | NSCC OBD2 RCPT CONN 15 WCAP BLK 16CKT (Alt: 989771081) RoHS : Compliant | 19,500 | ||
| 89947-710LF | Amphenol Corporation | Conn IDC Connector RCP 10 POS 2mm IDT RA Cable Mount Tube (Alt: 89947-710LF) RoHS : Compliant | 10,080 | |||
| 10108777-10002ALF | Amphenol Corporation | (Alt: 10108777-10002ALF) RoHS : Not Compliant | 1,020 | |||
| 1771091 | Phoenix Contact | (Alt: 1771091) RoHS : Compliant | 800 | |||
| 1771088 | Phoenix Contact | (Alt: 1771088) RoHS : Compliant | 770 | |||
| 15977102 | Molex | Conn Wire to Board HDR 10 POS 42mm Solder ST ThruHole Tray (Alt: 15977102) RoHS : Compliant | 250 | |||
| 1037710000 | Weidmüller Interface GmbH & Co. KG | (Alt: 1037710000) RoHS : Compliant | 100 | |||
| 2427710-3 | TE Connectivity | SGI 15 HEADER ASSY 6P KEY A NATURAL (Alt: 2427710-3) RoHS : Compliant | 0 | |||
| 389771006 | Molex | (Alt: 389771006) RoHS : Compliant | 0 | |||
| D12771-000 | TE Connectivity | Conn Power PL 20 POS 254mm Crimp ST 20 Terminal 1 Port (Alt: D12771-000) RoHS : Compliant | 0 | |||
| 771023-000 | TE Connectivity | (Alt: 771023-000) RoHS : Compliant | 0 | |||
| OQ0771000000G | Amphenol Corporation | (Alt: OQ0771000000G) RoHS : Compliant | 0 | |||
| OQ1771000000G | Amphenol Corporation | (Alt: OQ1771000000G) RoHS : Compliant | 0 | |||
| 10108777-10002MLF | Amphenol Corporation | Conn PCI Express Card SKT 98 POS 2mm Solder ST ThruHole (Alt: 10108777-10002MLF) RoHS : Compliant | 0 | |||
| 10108777-10142CLF | Amphenol Corporation | (Alt: 10108777-10142CLF) RoHS : Compliant | 0 | |||
Avnet Asia | 10172771-002C-TRLF | Amphenol Corporation | (Alt: 10172771-002C-TRLF) RoHS : Compliant | 2,400 | ||
| 10108777-10003CLF | Amphenol Corporation | Connector PCI Express Card Receptacle 164 Positon 1.47mm Card Thickness 1mm Solder Straight Through (Alt: 10108777-10003CLF) RoHS : Compliant | 1,800 | |||
| 0367710016 | Molex | 0W10052WIRE ASSY BRN FOR AP8866 (Alt: 0367710016) RoHS : Compliant | 750 | |||
| 0367710091 | Molex | 0W49346 CB CT DATA CABLE CT1, CT2 (Alt: 0367710091) RoHS : Compliant | 100 | |||
| 0367710006 | Molex | 0W04520 WIRE #12 STR YEL 42.50 #10 RNG (Alt: 0367710006) RoHS : Compliant | 0 | |||
| XR77103ELBTR-G1R2 | MaxLinear Inc | (Alt: XR77103ELBTR-G1R2) RoHS : Compliant | 0 | |||
| 046866771000846+ | KYOCERA Corporation | (Alt: 046866771000846+) RoHS : Compliant | 0 | |||
| ME1016843477101 | Amphenol Corporation | SSIO,MINI COOL EDGE DA 4C+ CONN GEN6 (Alt: ME1016843477101) RoHS : Compliant | 0 | |||
| 0367710036 | Molex | 0W4725A CABLE RIBBON ASSY 14 PIN EE (Alt: 0367710036) RoHS : Compliant | 0 | |||
| 10108777-10113TLF | Amphenol Corporation | (Alt: 10108777-10113TLF) RoHS : Compliant | 0 | |||
| 2527710-1 | TE Connectivity | (Alt: 2527710-1) RoHS : Compliant | 0 | |||
| 0367710035 | Molex | 0W05846WIRE #12SLD BR L1 TO BANK3 AP8863 (Alt: 0367710035) RoHS : Compliant | 0 | |||
| 10138277-103SLF | Amphenol Corporation | (Alt: 10138277-103SLF) RoHS : Compliant | 0 | |||
| 0367710002 | Molex | 0W04511 WIRE #12 STR YEL 41.50 #10 RNG (Alt: 0367710002) RoHS : Compliant | 0 | |||
| 91-77107-800E | ADLINK Technology Inc | (Alt: 91-77107-800E) RoHS : Compliant | 0 | |||
 Avnet Silica | B577104T11 | Antenova M2M | Picea antenna (Alt: B577104T11) RoHS : Compliant | 0 | ||
| LX7710MDWCB | Microchip Technology Inc | 125V Octal Series Diode Pairs Array with redundancy (Alt: LX7710MDWCB) RoHS : Not Compliant | 0 | |||
| LX7710MDWC-V | Microchip Technology Inc | (Alt: LX7710MDWC-V) RoHS : Compliant | 0 | |||
| LX7710MDWCEV | Microchip Technology Inc | (Alt: LX7710MDWCEV) RoHS : Not Compliant | 0 | |||
| LX7710MDWC-Q | Microchip Technology Inc | (Alt: LX7710MDWC-Q) RoHS : Compliant | 0 | |||
| LX7710MDWC-ES | Microchip Technology Inc | (Alt: LX7710MDWC-ES) RoHS : Not Compliant | 0 | |||
| PIC16C77-10/L | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 14KB EPROM 5V 44Pin PLCC Tube (Alt: PIC16C77-10/L) RoHS : Compliant | 0 | |||
| PIC16C77-10I/P | Microchip Technology Inc | MCCPIC16C7710IP (Alt: PIC16C77-10I/P) RoHS : Compliant | 0 | |||
| PIC16C77-10I/L | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 14KB EPROM 5V 44Pin PLCC Tube (Alt: PIC16C77-10I/L) RoHS : Compliant | 0 | |||
| PIC16F877-10E/PQ | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 14KB Flash 5V 44Pin MQFP Tray (Alt: PIC16F877-10E/PQ) RoHS : Compliant | 0 | |||
| XR77103ELBTR-G1R2 | MaxLinear Inc | DCDC Switching Regulator Fixed Buck Step Down 3 Output 11V 15V 33V 2 A 114 MHz 32 Pins TQFNEP (Alt: XR77103ELBTR-G1R2) RoHS : Compliant | 0 | |||
| XR77103ELBTR-A1R0 | MaxLinear Inc | DCDC Switching Regulator Adjustable Buck Step Down 3 Output 800 mV to 6 V 2 A 1 MHz 32 Pins TQFNEP (Alt: XR77103ELBTR-A1R0) RoHS : Compliant | 0 | |||
| M2-JODY-W377-10C | u-blox AG | M2 card with JODYW377 single packaging WiFi 6 and Bluetooth 53 PCIe UART 1 cardcarton box (Alt: M2-JODY-W377-10C) RoHS : Compliant | 0 | |||
| XR77103EVB-DEMO-1 | MaxLinear Inc | Universal PMIC 3Output Programmable Buck Regulator Evaluation Board (Alt: XR77103EVB-DEMO-1) RoHS : Compliant | 0 | |||
| 00000000927710001701 | Lumileds | LR5B 21322 12V 3W Gen3 (Alt: 00000000927710001701) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | ME910C1NA04T077100 | Telit | NRND - newer FW ME910C1NA05T087100M0B.100004, 30.00.117 (AT&T), 30.00.127 (Verizon) |
| 1 | |
| SRF3W077-100-MHF4 | Antenova M2M | Lotti WiFi 6E antenna+100mm cable100mm + Ipex or MHF4 |
| 0 | ||
| M2-JODY-W377-10C | u-blox AG | M.2 card with JODY-W377 single packaging Wi-Fi 5 and Bluetooth 5.2, SDIO, UART 1 card/carton box |
| 0 | ||
| SRF3W077-100 | Antenova M2M | Antennas Flexible PCB antenna for Wi-Fi6E applications 100mm cable + Ipex |
| 0 | ||
 Component Electronics, Inc | TD77-1006G1 | Halo Electronics Inc | IN STOCK SHIP TODAY | 2,380 | ||
| 90077-1075 | Molex | IN STOCK SHIP TODAY | 2,000 | |||
| 82777-877-1000 | Belden Inc | IN STOCK SHIP TODAY |
| 803 | ||
| 6402UE-877-1000 | Belden Inc | IN STOCK SHIP TODAY |
| 801 | ||
| 771016-HK200 | Lear Corporation | IN STOCK SHIP TODAY |
| 800 | ||
| 82761-877-1000 | Belden Inc | IN STOCK SHIP TODAY |
| 707 | ||
| MK2771-08STR | Black Lion Audio | IN STOCK SHIP TODAY | 656 | |||
| 71-94-5177-7107 | Sumitomo Wiring Systems LTD | IN STOCK SHIP TODAY | 150 | |||
| 1607710000 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY RoHS : Compliant |
| 50 | ||
| HCPL-7710-300E | Avago Technologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 37 | ||
| APC77101 | Bel Fuse | IN STOCK SHIP TODAY | 7 | |||
| 050377105 | TE Connectivity | IN STOCK SHIP TODAY | 4 | |||
| 9116P-877-1000 | Belden Inc | IN STOCK SHIP TODAY |
| 3 | ||
| 8533771001 | Weidmüller Interface GmbH & Co. KG | IN STOCK SHIP TODAY |
| 1 | ||
| SK7710 | RCA | IN STOCK SHIP TODAY | 1 | |||
 DB Roberts | 1177-10-AL | RAF Electronic Hardware |
| 207 | ||
| 4677-1032-A-24 | RAF Electronic Hardware | 0 | ||||
| 02771-00817/1 | Avdel | MONOBOLT ASSY PEAKY BREAKS | 0 | |||
| 4771000-6P | SHEREX FASTENING SO | 0 | ||||
| 497710 | Essentra Components | 0 | ||||
| 4677-1032-S | RAF Electronic Hardware | 0 | ||||
| 4177-1032-SS | RAF Electronic Hardware | 0 | ||||
| 77-10-104-13 | Southco | 0 | ||||
| 4677-1032-B-0 | RAF Electronic Hardware | 0 | ||||
| 8377-1032-A-34 | RAF Electronic Hardware | 0 | ||||
| D2-517-710-190 | Southco | This versatile design offers a comprehensive range of low-cost grip-tolerant solutions for high volume production applications. It provides a detent and positive stop for consistent positioning and vibration-resistant performance. Quick-access/quick-rele | 0 | |||
| 97-77-104-11 | Southco | 0 | ||||
| 2277-1032-AL | RAF Electronic Hardware | 0 | ||||
| E3-77-101-24 | Southco | 0 | ||||
| 97-77-103-11 | Southco | 0 | ||||
 EBV Elektronik | HCPL-7710-000E | Broadcom Limited | Optocoupler Gate Drive Output 1 Channel DIP 8 Pins 375 kV (Alt: HCPL-7710-000E) RoHS : Compliant | 10,550 | ||
| HCPL-7710-500E | Broadcom Limited | Optocoupler Gate Drive Output 1 Channel Surface Mount DIP 8 Pins 375 kV (Alt: HCPL-7710-500E) RoHS : Compliant | 2,000 | |||
| HCPL-7710-300E | Broadcom Limited | Optocoupler LogicOut PushPull Logic BufferIN 1CH 8Pin PDIP SMD Tube (Alt: HCPL-7710-300E) RoHS : Compliant | 1,250 | |||
| HCPL-7710 | Broadcom Limited | (Alt: HCPL-7710) RoHS : Not Compliant | 0 | |||
| NCV7710BGEVB | onsemi | NCV7710B DRIVER IC EVB (Alt: NCV7710BGEVB) RoHS : Compliant | 0 | |||
| HCPL-7710#300 | Broadcom Limited | Optocoupler LogicOut PushPull Logic BufferIN 1CH 8Pin PDIP SMD Tube (Alt: HCPL-7710#300) RoHS : Not Compliant | 0 | |||
| HCPL-7710#060 | Broadcom Limited | Optocoupler LogicOut PushPull Logic BufferIN 1CH 8Pin PDIP Tube (Alt: HCPL-7710#060) RoHS : Not Compliant | 0 | |||
| PIC16C77-10I/P | Microchip Technology Inc | MCCPIC16C7710IP (Alt: PIC16C77-10I/P) RoHS : Compliant | 0 | |||
| PIC16C77-10I/L | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 14KB EPROM 5V 44Pin PLCC Tube (Alt: PIC16C77-10I/L) RoHS : Compliant | 0 | |||
| HCPL-7710-060E | Broadcom Limited | Optocoupler LogicOut PushPull Logic BufferIN 1CH 8Pin PDIP Tube (Alt: HCPL-7710-060E) RoHS : Compliant | 0 | |||
| HCPL-7710-360E | Broadcom Limited | Optocoupler LogicOut PushPull Logic BufferIN 1CH 8Pin PDIP SMD Tube (Alt: HCPL-7710-360E) RoHS : Compliant | 0 | |||
| HCPL-7710-320E | Broadcom Limited | Optocoupler LogicOut PushPull Logic BufferIN 1CH 8Pin PDIP SMD Tube (Alt: HCPL-7710-320E) RoHS : Compliant | 0 | |||
| HCPL-7710-560E | Broadcom Limited | Optocoupler LogicOut PushPull Logic BufferIN 1CH 8Pin PDIP SMD TR (Alt: HCPL-7710-560E) RoHS : Compliant | 0 | |||
| PIC16F877-10E/PQ | Microchip Technology Inc | MCU 8bit PIC16 PIC RISC 14KB Flash 5V 44Pin MQFP Tray (Alt: PIC16F877-10E/PQ) RoHS : Compliant | 0 | |||
| PK8077105930800S RPFV | Intel Corporation | INTEL XEON 6740E SIERRA FOREST CPU (Alt: 99CJXX) RoHS : Compliant | 0 | |||
 ECCO | 10-821771-000 | Amphenol Industrial Operations |
| 452 | ||
 Flip Electronics | HCPL-7710 | Broadcom Limited | Stock, Ship Today RoHS : Not Compliant |
| 300 | |
 Master Electronics | 2771010 | Phoenix Contact | Double-level terminal block - connection method: Screw connection - cross section: 0.2 mm² - 4 mm² - AWG: 24 - 12 - width: 5.2 mm - color: gray - mounting type: NS 35/7 5 - NS 35/15 - NS 32 RoHS : Compliant |
| 292 | |
| 77106-14-7S6 | TE Connectivity | HERM RECP MOQ Reduction RoHS : Compliant |
| 0 | ||
| 77106-SL005 | Alpha Wire | Multi-Conductor Cable - 7 Conductors - 24 AWG - 7/32 Conductor Strand - 600V - Slate Jacket - 30.48m (100ft)/Spool. RoHS : Compliant |
| 0 | ||
| MW-07-03-G-D-177-101 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FFSD-05-S-07.71-01-N-RN1 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-06-03-G-D-377-106-010 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-18-02-G-D-177-100 | Samtec Inc | FLEXIBLE SURFACE MOUNT BO RoHS : Compliant |
| 0 | ||
| V112AH0B-A9C77-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-277-104 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-L-D-277-107 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-277-102 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 751771029 | OMRON Industrial Automation | RoHS : Compliant |
| 0 | ||
| D12771-000 | TE Connectivity | MTCPQKT1P2PGDA MOQ Reduction RoHS : Compliant |
| 0 | ||
| VVE9C77-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
| VVF8C77-100 | Carling Technologies | V-SERIES ROCKER SWITCH RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3W17710/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm. N Male to 4.3-10 Male Low Loss Cable Using LMR-LW600 Coax with HeatShrink., Radio frequency assembly N male to 4.3-10 male low loss cable using LMR-LW600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 4.3-10 male low loss cable using LMR-LW600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a 4.3-10 cable connection on the other. Our low loss type N to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W17710/HS can also be known as a low loss type N plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17710/HS RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to 4.3-10 male cable has a maximum VSWR of 1.4:1. Type N plug to 4.3-10 plug cable assembly PE3W17710/HS is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17710/HS can also be used in the other direction and will be a 4.3-10 male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 4.3-10 cable assembly for quick shipment worldwide. Variations of type N and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 4.3-10 low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 160 | ||
| PE3FCA077-10M | Pasternack Enterprises | Key Specifications, Mode: Single Mode, Multimode Class: OS2, Fiber Diameter: 9/125, Cable Assembly Color: Yellow, Return Loss Min: 50 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: LC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 300, Max Crush Resistance, Long Term (N/100mm): 100, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Duplex LC UPC to LC UPC, SM OS2, 2.0mm LSZH, Yellow - 10 meter. Pasternack’s PE3FCA077-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long patch cable assembly is equipped with duplex LC/UPC to LC/UPC connectors. Our yellow fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This patch cable assembly comes with a single mode OS2 fiber that offers stable, high-speed transmission over long distances. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA077-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of LC/UPC to LC/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OS2 single mode fiber optic cable that meets your requirements. |
| 94 | ||
| PE3M0077-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: M17/128-RG400-27478, RF Cable Type: M17/128-RG400, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. MIL-DTL-17 N Female Bulkhead to SMA Male Right Angle Cable 100 cm Length Using M17/128-RG400 Coax., Radio frequency assembly MIL-DTL-17 N female bulkhead to SMA male right angle cable 100 cm length using M17/128-RG400 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack MIL-DTL-17 (also referenced as MIL-C-17) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MIL-DTL-17 N female bulkhead to SMA male right angle cable 100 cm length using M17/128-RG400 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom M39012/03-0503 N type to M39012/56-3109 SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with M39012/03-0503 type N bulkhead cable connection on one end and right angle M39012/56-3109 SMA cable connection on the other. Our M39012/03-0503 type N to right angle M39012/56-3109 SMA cable assemblies have a female gender on end 1 and male on end 2. This M39012/03-0503 N type to M39012/56-3109 SMA cable is a female to male coax assembly, PE3M0077-100CM, can also be known as a MIL-DTL-17/MIL-C-17 M39012/03-0503 type N jack to right angle M39012/56-3109 SMA plug cable assembly and will be shipped same-day as it is purchased. M39012/03-0503 type N jack to M39012/56-3109 SMA plug cable assembly PE3M0077-100CM is built with M17/128-RG400 which is a flexible coax type. The Pasternack flexible M39012/03-0503 N cable assembly is manufactured with M39012/03-0503 N type to right angle M39012/56-3109 SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this MIL-C-17 11 GHz maximum frequency M39012/03-0503 type N female bulkhead to M39012/56-3109 SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3M0077-100CM can also be used in the other direction and will be right angle M39012/56-3109 SMA male to M39012/03-0503 type N female bulkhead cable assembly if the opposite connectivity is required. M39012/03-0503 type N jack bulkhead to M39012/56-3109 SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality M39012/03-0503 type N to M39012/56-3109 SMA cable assembly for quick shipment worldwide. Variations of M39012/03-0503 N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MIL-DTL-17 N female bulkhead to SMA male right angle cable 100 cm length using M17/128-RG400 coax. |
| 86 | ||
| PE3FCA377-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM5, Fiber Diameter: 50/125, Cable Assembly Color: Lime Green, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNR, Cable Diameter: 5.6 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 8-Fiber SC UPC to SC UPC, OM5 Multimode Distribution Cable, 5.6mm Riser, 2.0mm breakout, Lime Green-10M. Pasternack’s PE3FCA377-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 8-fiber cable assembly is equipped with SC/UPC to SC/UPC connectors. Our lime green fiber optic cable has a riser (OFNR) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM5 fiber that offers cutting-edge Wideband Multimode Fiber (WBMMF) technology, supporting at least four WDM channels at 28 Gbps per channel over the 850-953nm wavelength range and a bandwidth of 28000 MHz·km. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 8-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA377-10M fiber optic cable with a 5.6 mm cable diameter and 42 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of SC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for indoor high-speed deployments, guarantees reliability and superior signal integrity. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM5 multimode fiber optic cable that meets your requirements. |
| 69 | ||
| PE3FCA477-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: ST, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex ST UPC to ST UPC, MM OM4, 2.0mm LSZH, Aqua-10M. Pasternack’s PE3FCA477-10M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long simplex cable assembly is equipped with ST/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. As an OM4 fiber optic jumper, Pasternack’s PE3FCA477-10M is designed for ultra-high-speed, high-bandwidth data transmission, supporting greater distances and faster speeds than OM1 and OM3 fiber.The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA477-10M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. This PE3FCA477-10M fiber optic cable with a 2 mm cable diameter and 15 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of simplex ST/UPC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 48 | ||
| PE3FCA277-10M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM4, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: OFNP, Cable Diameter: 5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 60 deg C, Min Operating Temperature: 0 deg C, Ingress Protection (IP) Rating: Non-Rated. 6-Fiber LC UPC to ST UPC, OM4 Multimode Distribution Cable, 5.0mm Plenum, 2.0mm breakout, Aqua-10M. Pasternack’s PE3FCA277-10M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 10-meter long 6-fiber cable assembly is equipped with LC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has a plenum (OFNP) rated PVC jacket that ensures compliance with fire and safety standards. With an operating temperature range of 0 to 60 degrees C and a storage temperature range of -20 to 60 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM4 fiber that supports 10Gb Ethernet up to 550 meters and 40G/100G Ethernet up to 150 meters and a bandwidth of 4700 MHz.km that delivers low attenuation and high-speed performance for mission-critical applications. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 6-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA277-10M fiber optic cable with a 5 mm cable diameter and 37 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to ST/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is designed for hyperscale data centers and telecom backbones and ensures seamless network connectivity with minimal signal loss. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM4 multimode fiber optic cable that meets your requirements. |
| 47 | ||
| PE3W17710/HS-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to 4.3-10 Male Low Loss Cable 24 Inch Length Using LMR-LW600 Coax with HeatShrink., Radio frequency assembly N male to 4.3-10 male low loss cable 24 inch length using LMR-LW600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 4.3-10 male low loss cable 24 inch length using LMR-LW600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a 4.3-10 cable connection on the other. Our low loss type N to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W17710/HS-24 can also be known as a low loss type N plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17710/HS-24 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to 4.3-10 male cable has a maximum VSWR of 1.4:1. Type N plug to 4.3-10 plug cable assembly PE3W17710/HS-24 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17710/HS-24 can also be used in the other direction and will be a 4.3-10 male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 4.3-10 cable assembly for quick shipment worldwide. Variations of type N and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 4.3-10 low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 32 | ||
| PE3W17710/HS-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to 4.3-10 Male Low Loss Cable 36 Inch Length Using LMR-LW600 Coax with HeatShrink., Radio frequency assembly N male to 4.3-10 male low loss cable 36 inch length using LMR-LW600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 4.3-10 male low loss cable 36 inch length using LMR-LW600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a 4.3-10 cable connection on the other. Our low loss type N to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W17710/HS-36 can also be known as a low loss type N plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17710/HS-36 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to 4.3-10 male cable has a maximum VSWR of 1.4:1. Type N plug to 4.3-10 plug cable assembly PE3W17710/HS-36 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17710/HS-36 can also be used in the other direction and will be a 4.3-10 male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 4.3-10 cable assembly for quick shipment worldwide. Variations of type N and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 4.3-10 low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 32 | ||
| PE3W17710/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to 4.3-10 Male Low Loss Cable 180 Inch Length Using LMR-LW600 Coax with HeatShrink., Radio frequency assembly N male to 4.3-10 male low loss cable 180 inch length using LMR-LW600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 4.3-10 male low loss cable 180 inch length using LMR-LW600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a 4.3-10 cable connection on the other. Our low loss type N to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W17710/HS-180 can also be known as a low loss type N plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17710/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to 4.3-10 male cable has a maximum VSWR of 1.4:1. Type N plug to 4.3-10 plug cable assembly PE3W17710/HS-180 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17710/HS-180 can also be used in the other direction and will be a 4.3-10 male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 4.3-10 cable assembly for quick shipment worldwide. Variations of type N and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 4.3-10 low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 32 | ||
| PE3W17710/HS-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm, Length, Max: 120 inches. N Male to 4.3-10 Male Low Loss Cable 120 Inch Length Using LMR-LW600 Coax with HeatShrink., Radio frequency assembly N male to 4.3-10 male low loss cable 120 inch length using LMR-LW600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 4.3-10 male low loss cable 120 inch length using LMR-LW600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a 4.3-10 cable connection on the other. Our low loss type N to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W17710/HS-120 can also be known as a low loss type N plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17710/HS-120 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to 4.3-10 male cable has a maximum VSWR of 1.4:1. Type N plug to 4.3-10 plug cable assembly PE3W17710/HS-120 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17710/HS-120 can also be used in the other direction and will be a 4.3-10 male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 4.3-10 cable assembly for quick shipment worldwide. Variations of type N and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 4.3-10 low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 32 | ||
| PE3W03777-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. SMP Female Right Angle to Push-On SMP Female Cable 100 cm Length Using PE-SR405FL Coax., Radio frequency assembly SMP female right angle to push-on SMP female cable 100 cm length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMP female right angle to push-on SMP female cable 100 cm length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and SMP cable connection on the other. Our right angle SMP to SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE3W03777-100CM, can also be known as a right angle SMP jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3W03777-100CM is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMP cable assembly is manufactured with right angle SMP to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 8 GHz maximum frequency SMP right angle female to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03777-100CM can also be used in the other direction and will be SMP female to right angle SMP female cable assembly if the opposite connectivity is required. SMP right angle jack to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMP female right angle to push-on SMP female cable 100 cm length using PE-SR405FL coax. |
| 31 | ||
| PE3M0177-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL-27478, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 39.3701 inches. Temperature Conditioned N Female Bulkhead to N Female Bulkhead Low Loss Cable 100 cm Length Using PE-P142LL Coax., Pasternack temperature conditioned N female bulkhead to N female bulkhead low loss cable 100 cm length using PE-P142LL coax is a high reliability RF assembly that is available for same day shipping. PE3M0177-100CM is part of one of the largest selections of same day shipping highly reliable coaxial cables for RF, microwave and mmWave interconnect applications. Pasternack hi-rel temperature conditioned coaxial cable assembly products are great choices for industries such as military / defense, telecom, industrial / commercial, utilities, etc. High reliability temperature conditioned coax cables from Pasternack are designed for applications requiring high quality and temperature consistent wire properties. These highly reliable RF assemblies are preferred for uses such as laboratory RF test and measurement, severe / harsh weather, rugged use, designed for defense / military applications, telecom antenna tower component jumper connections, commercial / industrial production environments, low loss, etc. This temperature conditioned RF cable, like our other Pasternack coaxial assemblies, will ship the same-day and any custom high reliability type N to type N cable assembly orders will as well. Our temperature conditioned highly reliable low loss coax cable assembly is built with N type connection on one end and N type connection on the other. Our low loss type N to type N cable assemblies have a female gender on end 1 and female on end 2. This type N to N type cable is a female to female coax assembly. PE3M0177-100CM can also be known as a temperature conditioned low loss type N jack to type N jack cable assembly and will be shipped the same day after it is purchased. type N jack to N type jack cable assembly PE3M0177-100CM is built with PE-P142LL which is a flexible coax. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this temperature conditioned 18 GHz maximum frequency N type female to N type female cable are located on the datasheet specifications PDF along with CAD drawing and dimensions, Pasternack high reliability low loss N type jack to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for same-day shipment worldwide. Variations of PE44813 N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this temperature conditioned N female bulkhead to N female bulkhead low loss cable 100 cm length using PE-P142LL coax. |
| 0 | ||
| PE3W07710 | Pasternack Enterprises | Key Specifications, Connector Series 1: Double Banana, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm. Double Banana Plug to SMB Jack Bulkhead Cable Using LMR-195 Coax. PE3W07710 is a Double Banana plug to SMB jack bulkhead cable using LMR-195 coax. This Pasternack Double Banana plug to SMB jack bulkhead cable assembly uses a 50 Ohm Double Banana for connector 1 and a 50 Ohm SMB for connector 2. Our plug Double Banana to jack SMB bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07710 Double Banana plug to SMB jack bulkhead cable assembly is constructed with LMR-195 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C7710 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.92mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3277-100CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: SHV, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 39.37 inches. SHV Plug to BNC Male Cable Using RG58 Coax In 100 CM Length., Radio frequency assembly SHV plug to BNC male cable using RG58 coax in 100 cm length from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SHV plug to BNC male cable using RG58 coax in 100 cm length, SHV cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SHV to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SHV cable connection on one end and BNC cable connection on the other. Our SHV to BNC cable assemblies have a plug gender on end 1 and male on end 2. This SHV to BNC cable is a plug to male coax assembly, PE3277-100CM, can also be known as a SHV male to BNC plug cable assembly and will be shipped same-day as it is purchased. SHV male to BNC plug cable assembly PE3277-100CM is built with RG58 which is a flexible coax type. The Pasternack flexible SHV cable assembly is manufactured with SHV to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 300 MHz maximum frequency SHV plug to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3277-100CM can also be used in the other direction and will be BNC male to SHV plug cable assembly if the opposite connectivity is required. SHV male to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SHV to BNC cable assembly for quick shipment worldwide. Variations of SHV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SHV plug to BNC male cable using RG58 coax in 100 cm length. |
| 0 | ||
 Teledyne HiRel | 5962-8877101RA | Teledyne HiRel | SHIFT STORAGE REGISTER, 8-BIT UNIVERSAL, WITH COMMON PARALLEL I/O PINS, TTL-COMP RoHS : Not Compliant | 0 | ||
| 5962-8877101SA | Teledyne HiRel | SHIFT STORAGE REGISTER, 8-BIT UNIVERSAL, WITH COMMON PARALLEL I/O PINS, TTL-COMP RoHS : Not Compliant | 0 | |||
| 5962-88771012A | Teledyne HiRel | SHIFT STORAGE REGISTER, 8-BIT UNIVERSAL, WITH COMMON PARALLEL I/O PINS, TTL-COMP RoHS : Not Compliant | 0 | |||
 Vyrian | M80-7710845 | Harwin PLC | Board Connector, 8 Contact(s), 2 Row(s), Male, Right Angle, 0.079 inch Pitch, Solder Terminal, Locking, Black Insulator, Receptacle | 16,902 | ||
| MAX77100EWL-T | Analog Devices (Maxim Integrated) | 11,862 | ||||
| MAX77100EVKIT | Analog Devices (Maxim Integrated) | 11,804 | ||||
| MAXM17710AMB+ | Analog Devices Inc | Switching Regulator RoHS : Compliant | 11,499 | |||
| MAX17710G+T | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, PDSO12 RoHS : Compliant | 11,403 | |||
| MAXM17710AMB+T | Analog Devices Inc | Switching Regulator RoHS : Compliant | 11,318 | |||
| MAX17710BD-W | Analog Devices (Maxim Integrated) | 10,691 | ||||
| MAX77100EWL-CGC | Analog Devices (Maxim Integrated) | 9,662 | ||||
| MAX17710BXUTEVKIT | Analog Devices (Maxim Integrated) | 8,974 | ||||
| MAX77100PEWL-T | Analog Devices (Maxim Integrated) | 8,895 | ||||
| MAX77100EWL-TCGC | Analog Devices (Maxim Integrated) | 7,513 | ||||
| MAX77100EWL | Analog Devices (Maxim Integrated) | 7,495 | ||||
| MAX77100PEWL | Analog Devices (Maxim Integrated) | 6,801 | ||||
| MAX17710EVKIT | Analog Devices (Maxim Integrated) | 5,924 | ||||
| M57710-A | Mitsubishi Electric | Narrow Band High Power Amplifier, 156MHz Min, 160MHz Max, Hybrid | 428 | |||
 Waytek, Inc. | 7282-5577-10 | Yazaki Corp | 6 Posistion Yazaki 2.8 Sealed Male Connector |
| 258 | |
| 77103 | Grote Industries Inc | Mighty Mini Strobe Light .25 AMPS 12 VDC W 5 1/8" H 3 5/8" |
| 8 | ||
 Win Source Electronics | 74477710 | Wurth Elektronik | FIXED IND 10UH 2A 49 MOHM SMD RoHS : Compliant |
| 65,653 | |
UCC27710D | Texas Instruments | IC GATE DRVR HALF-BRIDGE 8SOIC / Half-Bridge Gate Driver IC 8-SOIC RoHS : Compliant |
| 19,400 | ||
| UCC27710DR | Texas Instruments | IC GATE DRVR HALF-BRIDGE 8SOIC RoHS : Compliant |
| 17,720 | ||
| ISO7710DWR | Texas Instruments | DGTL ISO 5000VRMS 1CH GP 16SOIC RoHS : Compliant |
| 13,350 | ||
| ISO7710DW | Texas Instruments | DGTL ISO 5000VRMS 1CH GP 16SOIC RoHS : Compliant |
| 12,000 | ||
| BTM7710G | Infineon Technologies AG | INTEGRATED FULL-BRIDGE DRIVER RoHS : Compliant |
| 10,000 | ||
| BTM7710GPAUMA1 | Infineon Technologies AG | IC BRIDGE DRIVER PAR TO263-15 RoHS : Compliant |
| 9,440 | ||
| HCPL-7710-000E | Broadcom Limited | OPTOISO 3.75KV PUSH PULL 8DIP RoHS : Compliant |
| 9,321 | ||
| BTM7710GXUMA1 | Infineon Technologies AG | IC BRIDGE DRIVER PAR 28DSO RoHS : Compliant |
| 9,300 | ||
| BTM7710GP | Infineon Technologies AG | TrilithIC RoHS : Compliant |
| 9,050 | ||
| 744771008 | Wurth Elektronik | POWER-CHOKE WE-PD | FIXED IND 8.2UH 6.25A 20 MOHM RoHS : Compliant |
| 6,000 | ||
| AD7710AR | Analog Devices Inc | Signal Conditioning ADC | IC ADC 24BIT SIGMA-DELTA 24SOIC RoHS : Not Compliant |
| 1,200 | ||
| AD7710ARZ | Analog Devices Inc | IC ADC 24BIT DIFF INP 24-SOIC RoHS : Compliant |
| 400 | ||
| AD7710ARZ-REEL | Analog Devices Inc | Signal Conditioning ADC | IC ADC 24BIT SIGMA-DELTA 24SOIC RoHS : Compliant |
| 360 | ||
| AD7710ARZ-REEL7 | Analog Devices Inc | IC ADC 24BIT DIFF INP 24-SOIC RoHS : Compliant |
| 360 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Mexican ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
British
New Zealand