7201280ACNLNNTZCWC Price, Reseller, Stock

Southcos 96 hinges allow doors to be removed quickly easily and safely without the use of tools. A non lift-off configuration allows for permanent installation and the hinges are available in multiple styles to satisfy a variety of applications. Stainle

1 : $3.909
100 : $1.3563
500 : $1.0767

1,058

AESS37-200

PennEngineering (PEM)

Designed for high load applications. Available with rib key or full hex features for high torque applications.Both UNC and UNF threads available in No. 10 and larger thread sizes. Check for availability of other grip ranges and designs.

1 : $20.7024
100 : $14.5476
500 : $11.4523
1,000 : $9.4432

1,000

720

Keystone Electronics Corp

BUMPER
RoHS : Compliant

1 : $0.1445
80 : $0.1445

37-20-071-20

Southco

These industrial style handles are a very forgiving solution for imperfectly aligned panels in co-planar applications. Their flexible stretch-and-latch design and substantial handgrip area make them easy to engage in field conditions even with gloved han

1 : $10.88
4 : $10.88

957200048

Haeger

1 : $566.3462

720

Avdel

P-0208-03.0

B7-20-501-10

Southco

B7-20-501-10

H3-EM-67-200

Southco

Southcos H3-EM Electronic Locking Swinghandle features an efficient microprocessor-controlled gear motor design that ensures minimal power consumption and provides intelligent locking and monitoring capabilities. The H3-EM can be used as a standalone syst

FHS-167-20

PennEngineering (PEM)

PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly

D2-513-720-190

Southco

This versatile design offers a comprehensive range of low-cost grip-tolerant solutions for high volume production applications. It provides a detent and positive stop for consistent positioning and vibration-resistant performance. Quick-access/quick-rele

A00272-00

PennEngineering (PEM)

D7-290-720-191

Southco

These two styles of quick access fasteners provide convenient installation and operation with grip tolerance and a wide range of tolerance for support panel and mounting panel thicknesses. They are available in metallic and thermoplastic constructions to

495720

Essentra Components

21 HEAT SHRINK TUBINGPOLYOLEFI

13RS018720

Essentra Components

07200-02601

Avdel

14 SWAGING ANVIL

ECCO

97-20-7P

Amphenol Industrial Operations

5 : $9.82

1,137

136072-000

TE Connectivity

5 : $5.59

929

97-20-15S

Amphenol Industrial Operations

5 : $21.25

202

97-20-15S

Amphenol Industrial Operations

5 : $21.25

200

97-20-7S(431)

Amphenol Industrial Operations

5 : $12.79

128

97-20-16S(431)

Amphenol Industrial Operations

5 : $15.98

121

97-20-16S(431)

Amphenol Industrial Operations

5 : $15.98

121

97-20-19S

Amphenol Industrial Operations

1 : $24.76

104

97-20-19S

Amphenol Industrial Operations

1 : $23.57

104

97-20-16P

Amphenol Industrial Operations

5 : $10.52

100

97-20-16P

Amphenol Industrial Operations

5 : $10.52

100

MS27720-23-1D

OTTO Engineering Inc

RoHS : Compliant

1 : $76.97

97-3057-20(621)

Amphenol Industrial Operations

5 : $13.71

97-3057-20(621)

Amphenol Industrial Operations

5 : $13.71

MS27720-22-1D

OTTO Engineering Inc

RoHS : Compliant

1 : $87.39

Flip Electronics

NCV8720BMT170TBG

onsemi

Stock, Ship Today
RoHS : Compliant

58,450

NCP720BMT125TBG

onsemi

Stock, Ship Today
RoHS : Compliant

54,000

SI7201-B-87-IVR

Silicon Laboratories Inc

Stock, Ship Today
RoHS : Compliant

22,605

NCV8720BMT120TBG

onsemi

Stock, Ship Today
RoHS : Compliant

6,153

NCV8720BMT115TBG

onsemi

Stock, Ship Today
RoHS : Compliant

2,965

NCP720BMT170TBG

onsemi

Stock, Ship Today
RoHS : Compliant

2,900

NCV57201DR2G

onsemi

Stock, Ship Today
RoHS : Compliant

2,277

LX2160SN72029B

NXP Semiconductors

Stock
RoHS : Compliant

872

STK672-070-E

onsemi

Stock, Ship Today
RoHS : Compliant

775

DSPB56720CAG

NXP Semiconductors

Stock, Ship Today
RoHS : Compliant

647

SI7201-B-84-IV

Silicon Laboratories Inc

Stock, Ship Today
RoHS : Compliant

300

LX2080SN72029B

NXP Semiconductors

Stock
RoHS : Compliant

LX2160SC72029B

NXP Semiconductors

Stock
RoHS : Compliant

LX2080SC72029B

NXP Semiconductors

Stock
RoHS : Compliant

CY7C027-20AXC

Infineon Technologies AG

Stock, Ship Today

Pasternack Enterprises US

PE337-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. N Male to SMA Male with Reduced Diameter SMA Body Low Loss Test Cable 200 CM Length Using PE-P300LL Coax, RoHS., Radio frequency assembly N male to SMA male with reduced diameter SMA body low loss test cable 200 cm length using PE-P300LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to SMA male with reduced diameter SMA body low loss test cable 200 cm length using PE-P300LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with N type cable connection on one end and SMA cable connection on the other. Our low loss test type N to SMA cable assemblies have a male gender on end 1 and male on end 2. This type N to SMA cable is a male to male coax assembly, PE337-200CM, can also be known as a low loss test type N plug to SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE337-200CM is built with PE-P300LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to SMA cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency type N male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE337-200CM can also be used in the other direction and will be SMA male to type N male cable assembly if the opposite connectivity is required. Low loss test type N plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to SMA cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SMA male with reduced diameter SMA body low loss test cable 200 cm length using PE-P300LL coax, RoHS.

1 : $550.0
25 : $522.5
50 : $495.0

189

PE3C7720-100CM

Pasternack Enterprises

Key Specifications, Connector Series 1: 10-32, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 10-32 Male Right Angle to Push-On SMP Female Flexible Cable 100 CM Length Using RG178 Coax., Radio frequency assembly 10-32 male right angle to push-on SMP female flexible cable 100 cm length using RG178 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 10-32 male right angle to push-on SMP female flexible cable 100 cm length using RG178 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10-32 to SMP cable assembly orders will ship same day as well. Pasternack RF coax flexible cable assembly is built with right angle 10-32 cable connection on one end and SMP cable connection on the other. Our flexible right angle 10-32 to SMP cable assemblies have a male gender on end 1 and female on end 2. This 10-32 to SMP cable is a male to female coax assembly, PE3C7720-100CM, can also be known as a flexible right angle 10-32 plug to SMP jack cable assembly and will be shipped same-day as it is purchased. 10-32 plug to SMP jack cable assembly PE3C7720-100CM is built with RG178 which is a flexible coax type. The Pasternack flexible 10-32 cable assembly is manufactured with right angle 10-32 to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency 10-32 right angle male to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7720-100CM can also be used in the other direction and will be SMP female to right angle 10-32 male cable assembly if the opposite connectivity is required. Flexible 10-32 right angle plug to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10-32 to SMP cable assembly for quick shipment worldwide. Variations of 10-32 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10-32 male right angle to push-on SMP female flexible cable 100 cm length using RG178 coax.

1 : $84.99
25 : $80.74
50 : $76.49
100 : $73.09

PE7207-10

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.45:1, Attenuation: 10 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Series 2: N, Connector Gender 2: Male, Body Material: Black Anodized Aluminum Heatsink. 10 dB Fixed Attenuator, 7/16 DIN Female To N Male Directional Black Anodized Aluminum Heatsink Body Rated To 100 Watts Up To 6 GHz. PE7207-10 is a fixed 10 dB attenuator from Pasternack. This 10dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a female gender on side 1 and a type N male connector on side 2. The Pasternack PE7207-10 10 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7207-10 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 10dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $1,040.0
5 : $998.4
10 : $956.8

PE7207-20

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.45:1, Attenuation: 20 dB, Connector Series 1: 7/16 DIN, Connector Gender 1: Female, Connector Series 2: N, Connector Gender 2: Male, Body Material: Black Anodized Aluminum Heatsink. 20 dB Fixed Attenuator, 7/16 DIN Female To N Male Directional Black Anodized Aluminum Heatsink Body Rated To 100 Watts Up To 6 GHz. PE7207-20 is a fixed 20 dB attenuator from Pasternack. This 20dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This 7/16 DIN attenuator has a female gender on side 1 and a type N male connector on side 2. The Pasternack PE7207-20 20 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7207-20 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 20dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $1,040.0
5 : $998.4
10 : $956.8

PE7017-20

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Power Maximum: 25 Watt, VSWR Maximum: 1.4:1, Attenuation: 20 dB, Connector Series 1: N, Connector Gender 1: Male, Connector Series 2: N, Connector Gender 2: Female, Body Material: Black Anodized Aluminum Heatsink. 20 dB Fixed Attenuator, N Male to N Female Black Anodized Aluminum Heatsink Body Rated to 25 Watts Up to 18 GHz. PE7017-20 is a fixed 20 dB attenuator from Pasternack. This 20dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a male gender on side 1 and a type N female connector on side 2. The Pasternack PE7017-20 20 dB attenuator is rated for up to 18 GHz. Our microwave attenuator is rated to 25 Watts at the stated attenuation value. Our fixed RF attenuator PE7017-20 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 20dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $885.0
5 : $849.6
10 : $814.2

PE7202-60

Pasternack Enterprises

Key Specifications, Design: Fixed, Maximum Frequency: 6 GHz, Impedance: 50 Ohm, Power Maximum: 100 Watt, VSWR Maximum: 1.45:1, Attenuation: 60 dB, Connector Series 1: N, Connector Gender 1: Female, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Body Material: Black Anodized Aluminum Heatsink. 60 dB Fixed Attenuator, N Female To 7/16 DIN Male Directional Black Anodized Aluminum Heatsink Body Rated To 100 Watts Up To 6 GHz. PE7202-60 is a fixed 60 dB attenuator from Pasternack. This 60dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This type N attenuator has a female gender on side 1 and a 7/16 DIN male connector on side 2. The Pasternack PE7202-60 60 dB attenuator is rated for up to 6 GHz. Our microwave attenuator is rated to 100 Watts at the stated attenuation value. Our fixed RF attenuator PE7202-60 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 60dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $1,200.0
5 : $1,152.0
10 : $1,104.0

PE33720-24

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male to N Male Cable 24 Inch Length Using RG8X Coax., Radio frequency assembly N male to N male cable 24 inch length using RG8X coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to N male cable 24 inch length using RG8X coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and N type cable connection on the other. Our type N to type N cable assemblies have a male gender on end 1 and male on end 2. This type N to type N cable is a male to male coax assembly, PE33720-24, can also be known as a N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE33720-24 is built with RG8X which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Type N plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male cable 24 inch length using RG8X coax.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE38720

Pasternack Enterprises

PE3C3720LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to BNC Male Cable Using RG174 Coax, LF Solder, RoHS., Radio frequency assembly SMA male right angle to BNC male cable using RG174 coax, LF solder, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to BNC male cable using RG174 coax, LF solder, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and BNC cable connection on the other. Our right angle SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to BNC cable is a male to male coax assembly, PE3C3720LF, can also be known as a right angle SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C3720LF is built with RG174 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency SMA right angle male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3720LF can also be used in the other direction and will be BNC male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to BNC male cable using RG174 coax, LF solder, RoHS.

PE3C5767-200CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Male to SMA Female Bulkhead Low Loss Cable 200 CM Length Using LMR-195 Coax., Radio frequency assembly SMA male to SMA female bulkhead low loss cable 200 cm length using LMR-195 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to SMA female bulkhead low loss cable 200 cm length using LMR-195 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our low loss SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3C5767-200CM, can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3C5767-200CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5767-200CM can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead low loss cable 200 cm length using LMR-195 coax.

1 : $76.99
25 : $73.14
50 : $69.29
100 : $66.21

PE3C6720-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Male to UHF Male Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly BNC male to UHF male low loss cable 60 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to UHF male low loss cable 60 inch length using LMR-400 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to UHF cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a UHF cable connection on the other. Our low loss a BNC to a UHF cable assembly has male gender on end 1 and male on end 2. PE3C6720-60 can also be known as a low loss BNC plug to UHF plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6720-60 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. BNC plug to UHF plug cable assembly PE3C6720-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to UHF cable connectors and has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the crimp/non-solder contact attachment method and brass body with tin/nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C6720-60 can also be used in the other direction and will be UHF male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to UHF plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to UHF cable assembly for quick shipment worldwide. Variations of BNC and UHF cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to UHF low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $93.99
25 : $89.29
50 : $84.59
100 : $80.83

PE3W09720/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195-FR, RF Cable Type: LMR-195-FR, RF Cable Impedance: 50 Ohm. BNC Male to N Female Bulkhead Cable Using LMR-195-FR Coax with HeatShrink. PE3W09720/HS is a BNC male to N female bulkhead cable using LMR-195-FR coax. This Pasternack BNC male to N female bulkhead cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm N for connector 2. Our male BNC to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W09720/HS BNC male to N female bulkhead cable assembly is constructed with LMR-195-FR coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W10720/HS

Pasternack Enterprises

PE3W14720

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Female to Reverse Polarity TNC Female Cable Using RG58 Coax. PE3W14720 is a N female to reverse polarity TNC female cable using RG58 coax. This Pasternack N female to reverse polarity TNC female cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our female N to reverse polarity female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W14720 N female to TNC reverse polarity female cable assembly is constructed with RG58 coax.

PE3C0720/HS-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. Reverse Polarity SMA Plug Right Angle to SMA Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly reverse polarity SMA plug right angle to SMA male low loss cable 60 inch length using LMR-195 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity SMA plug right angle to SMA male low loss cable 60 inch length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle reverse polarity SMA cable connection on one end and a SMA cable connection on the other. Our low loss right angle reverse polarity SMA to SMA cable assembly has a plug gender on end 1 and a male on end 2. PE3C0720/HS-60 can also be known as a low loss right angle reverse polarity SMA male to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0720/HS-60 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Reverse polarity SMA male to SMA plug cable assembly PE3C0720/HS-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C0720/HS-60 can also be used in the other direction and will be a SMA male to right angle reverse polarity SMA plug cable assembly if the opposite connectivity is required. Low loss SMA reverse polarity right angle male to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $117.99
25 : $112.09
50 : $106.19
100 : $101.47

TE Connectivity

170720-1

TE Connectivity

SOLIS RING UL.JIS.CSA(22-18) Ring Terminal Product Type: Closed Ring Tongue Terminal Wire Size: 22 – 18 AWG Wire Size: .3 – 1.42 mm² Wire Size: 509 – 3260 CMA Stud Size: M3 Closed Ring Tongue Terminal 22 – 18 AWG .3 – 1.42 mm² 509 – 3260 CMA | Ring Terminal | Part Number: 170720-1 | Internal Number: 170720-1 | TE Connectivity
RoHS : Compliant

25,000 : $0.39
10,000 : $0.39
5,000 : $0.4
2,500 : $0.41
1,000 : $0.42
500 : $0.43
250 : $0.43
100 : $0.44
50 : $0.45
25 : $0.46
10 : $0.46
1 : $0.47

26,948

1-604772-0

TE Connectivity

CABLE TIE, 8 L, BLACK, 100PK Cable Tie Style: Standard Packaging Method: Bag Tensile Strength: 50 lbf Tensile Strength: 222.411 Newton Product Length: 8 in Standard Bag 50 lbf 222.411 Newton | Cable Ties | Part Number: 1-604772-0 | Internal Number: 1-604772-0 | TE Connectivity
RoHS : Compliant

1,000 : $0.34
500 : $0.35
250 : $0.36
100 : $0.37
50 : $0.38
25 : $0.39
10 : $0.4
1 : $0.41

4,755

1-794772-0

TE Connectivity

10P MINI UMNL SEAL,DIE CUT Connector Seal & Plug Type: Interface Seal Operating Temperature Range: -40 – 90 °C Operating Temperature Range: -40 – 194 °F Primary Product Material: Urethane Foam Shore A Hardness Range: 50 Interface Seal Max Temp: -40 – 90 °C | Connector Seal & Cavity Plug | Part Number: 1-794772-0 | Internal Number: 1-794772-0 | Urethane Foam | TE Connectivity
RoHS : Compliant

1,000 : $0.61
100 : $0.82
10 : $1.01
1 : $1.27

3,736

172063-1

TE Connectivity

08P DRAWER MALE HSG Number of Positions: 8 Connector & Housing Type: Plug Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Standard Rectangular Connector | 8 Plug Housing With | Part Number: 172063-1 | Internal Number: 172063-1 | TE Connectivity
RoHS : Compliant

1,000 : $6.58
500 : $6.77
250 : $6.98
100 : $7.21
50 : $7.42
1 : $8.14

3,567

1670720-2

TE Connectivity

SLIDE,TAB HSG GROUP C Primary Product Color: Red Primary Product Material: PBT GF Automotive Connector Accessory Type: Mounting Clip Operating Temperature Range: -40 – 140 °C Operating Temperature Range: -40 – 284 °F Red PBT GF | Heavy Duty Sealed Connector Series Fixing Slide | Part Number: 1670720-2 | Internal Number: 1670720-2 | TE Connectivity
RoHS : Compliant

1 : $0.55

1,295

1-1926720-6

TE Connectivity

AssyMinipakHDL6p15s6PRAPlugbrdlock PCB Header & Receptacle | Part Number: 1-1926720-6 | Internal Number: 1-1926720-6 | TE Connectivity
RoHS : Compliant

1,000 : $12.56
500 : $12.91
250 : $13.31
100 : $13.76
50 : $14.16
1 : $15.54

684

1986720-4

TE Connectivity

STR PLUG SPRING TYPE RH 4P, 3.81mm Number of Positions: 4 Terminal Block Connector Type: Plug Connector System: Wire-to-Board Centerline (Pitch): .15 in Centerline (Pitch): 3.81 mm PCB Terminal Block | 4 Plug Wire-to-Board .15" | Part Number: 1986720-4 | Internal Number: 1986720-4 | .15" | TE Connectivity
RoHS : Compliant

2,500 : $6.03
1,000 : $6.19
500 : $6.35
250 : $6.52
100 : $6.68
50 : $6.84
25 : $7.0
10 : $7.17
1 : $7.33

561

2-2172068-2

TE Connectivity

M8 FEMALE R/A PNL.3P.PCB (AU) Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Receptacle Number of Positions: 3 Circular Connector Shell Size: 12 Sealable: Yes Wire-to-Panel Circular Connector Receptacle 3 12 | Standard Circular Connector | Part Number: 2-2172068-2 | Internal Number: 2-2172068-2 | TE Connectivity
RoHS : Compliant

100 : $55.25
50 : $57.89
25 : $60.52
10 : $63.14
1 : $65.77

306

3-2172068-2

TE Connectivity

M8 FEMALE R/A PNL.4P.PCB (AU) Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Receptacle Number of Positions: 4 Circular Connector Shell Size: 12 Sealable: Yes Wire-to-Panel Circular Connector Receptacle 4 12 | Standard Circular Connector | Part Number: 3-2172068-2 | Internal Number: 3-2172068-2 | TE Connectivity
RoHS : Compliant

100 : $67.18
50 : $70.39
25 : $73.59
10 : $76.79
1 : $79.99

280

2-2172067-2

TE Connectivity

M8 MALE R/A PNL.3P.PCB (AU) Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Plug Number of Positions: 3 Circular Connector Shell Size: 12 Sealable: Yes Wire-to-Panel Circular Connector Plug 3 12 | Standard Circular Connector | Part Number: 2-2172067-2 | Internal Number: 2-2172067-2 | TE Connectivity
RoHS : Compliant

100 : $55.25
50 : $57.89
25 : $60.52
10 : $63.14
1 : $65.77

213

172061-1

TE Connectivity

12P DRAWER MALE HSG Number of Positions: 12 Connector & Housing Type: Plug Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Standard Rectangular Connector | 12 Plug Housing With | Part Number: 172061-1 | Internal Number: 172061-1 | TE Connectivity
RoHS : Compliant

1,000 : $9.8
500 : $10.08
250 : $10.4
100 : $10.74
50 : $11.06
1 : $12.13

196

T4072014041-001

TE Connectivity

M8.MLE.PNLFRONT.4POS.STR WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Plug Number of Positions: 4 Circular Connector Shell Size: 12.6 Sealable: Yes Wire-to-Panel Circular Connector Plug 4 12.6 | M8 Panel Mount Wire | Part Number: T4072014041-001 | Internal Number: T4072014041-001 | TE Connectivity
RoHS : Compliant

250 : $26.44
100 : $27.5
50 : $28.56
25 : $29.62
10 : $30.67
1 : $31.73

154

T2111027201-007

TE Connectivity

HMN-Q1-F Contact Type: Socket Rectangular Connector Insert Type: Insert for Contacts Pole Configuration: 1 Wire Size: 26 – 12 AWG Wire Size: .14 – 4 mm² Socket Insert for Contacts 1 26 – 12 AWG | Hdc Hmn Modular System & Rail Compliant | Part Number: T2111027201-007 | Internal Number: T2111027201-007 | TE Connectivity
RoHS : Compliant

50 : $14.76
25 : $15.63
10 : $16.49
1 : $17.36

CTJ720K01B-7067

TE Connectivity

MODULE ASSY Terminal Junction System Component Type: Grounding Module Environmental Screw Assembly Compatible With Contact Size: 20 Operating Temperature Range: -67 – 392 °C Grounding Module Environmental Screw Assembly 20 | Terminal Junction Module | Part Number: CTJ720K01B-7067 | Internal Number: CTJ720K01B-7067 | TE Connectivity
RoHS : Compliant

1 : $53.71

720725-1

TE Connectivity

DAHT 250 FASTIN-ON TAB REC 18-14 ASSY Tool Grade: Premium Crimp Tooling Ratchet Configuration: Not Releasable, Not Adjustable Die Sets Type: Fixed In Tool Specification Type: TE Product Specification (114-) TE Certification: Yes – Certificate Included Premium Crimp Tooling Not Releasable, Not Adjustable Fixed" Tool | Hand Crimping Tool | Part Number: 720725-1 | Internal Number: 720725-1 | TE Connectivity
RoHS : Compliant

1 : $1,442.0

Teledyne HiRel

5962-8607201EA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN
RoHS : Not Compliant

5962-8757202DA

Teledyne HiRel

VOLT. COMPARATOR, DIFFERENTIAL, HIGH-SPEED
RoHS : Not Compliant

5962-8757203CA

Teledyne HiRel

VOLT. COMPARATOR, DIFFERENTIAL, HIGH-SPEED
RoHS : Not Compliant

5962-86872012A

Teledyne HiRel

BUFFER/DRIVER, NAND, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

5962-8607201FA

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN
RoHS : Not Compliant

5962-8687201DA

Teledyne HiRel

BUFFER/DRIVER, NAND, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

5962-8757203BA

Teledyne HiRel

VOLT. COMPARATOR, DIFFERENTIAL, HIGH-SPEED
RoHS : Not Compliant

5962-8757202CA

Teledyne HiRel

VOLT. COMPARATOR, DIFFERENTIAL, HIGH-SPEED
RoHS : Not Compliant

5962-8757203IA

Teledyne HiRel

VOLT. COMPARATOR, DIFFERENTIAL, HIGH-SPEED
RoHS : Not Compliant

5962-86072012A

Teledyne HiRel

BINARY COUNTER, 4-BIT SYNCHRONOUS UP/DOWN
RoHS : Not Compliant

5962-8687201CA

Teledyne HiRel

BUFFER/DRIVER, NAND, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS
RoHS : Not Compliant

Venkel Ltd.

SSPI474720-120NU

VENKEL LTD

Square Shielded Power Inductor;474720;12uH;�30%
RoHS : Not Compliant

SSPI474720-1R8NU

VENKEL LTD

Square Shielded Power Inductor;474720;1.8uH;�30%
RoHS : Not Compliant

SSPI575720-4R1NU

VENKEL LTD

Square Shielded Power Inductor;575720;4.1uH;�30%
RoHS : Not Compliant

SSPI474720-680NU

VENKEL LTD

Square Shielded Power Inductor;474720;68uH;�30%
RoHS : Not Compliant

SSPI575720-3R3NU

VENKEL LTD

Square Shielded Power Inductor;575720;3.3uH;�30%
RoHS : Not Compliant

UPTF1206-8W-N-1720DT-1K

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;10PPM;172R;�0.5%
RoHS : Compliant

TFCR0402-16W-E-1720DT

VENKEL LTD

Thin Film CR;0402;1/16W;�25PPM;172R;�0.5%
RoHS : Compliant

TFCR0603-16W-E-1720BT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�25PPM;172R;�0.1%
RoHS : Compliant

TFCR0805-8W-C-1720CT-1K

VENKEL LTD

Thin Film CR;0805;1/8W;�50PPM;172R;�0.25%
RoHS : Compliant

TFCR0805-8W-E-1720BT

VENKEL LTD

Thin Film CR;0805;1/8W;�25PPM;172R;�0.1%
RoHS : Compliant

SSPI474720-3R9NU

VENKEL LTD

Square Shielded Power Inductor;474720;3.9uH;�30%
RoHS : Not Compliant

SSPI575720-6R2NU

VENKEL LTD

Square Shielded Power Inductor;575720;6.2uH;�30%
RoHS : Not Compliant

UPTF0805-10W-N-1720BT

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�10PPM;172R;�0.1%
RoHS : Compliant

UPTF0805-10W-P-1720AT-1K

VENKEL LTD

Ultra Precision Thin Film CR;0805;1/10W;�5PPM;172R;�0.05%
RoHS : Compliant

UPTF1206-8W-N-1720UT

VENKEL LTD

Ultra Precision Thin Film CR;1206;1/8W;10PPM;172R;�0.01%
RoHS : Compliant

Win Source Electronics

P0720SCLRP

Littelfuse Inc

Thyristor Surge Protection Devices 65V 35A 2-Pin DO-214AA T/R / SIDACTOR BI 65V 400A DO-214AA
RoHS : Compliant

1,600 : $0.1877
1,195 : $0.2094
925 : $0.2166
675 : $0.2238
435 : $0.231
180 : $0.2816

140,000

BAT720

Yangzhou Yangjie Electronics Co Ltd

DIODE SCHOTTKY 40V 500MA SOT23 / Diode 40 V 500mA Surface Mount SOT-23

25,865 : $0.0116
19,380 : $0.0129
14,930 : $0.0134
10,870 : $0.0138
6,995 : $0.0143
2,875 : $0.0174

60,000

RC0603FR-07200KL

YAGEO Corporation

RES SMD 200K OHM 1% 1/10W 0603
RoHS : Compliant

55,560 : $0.0054
41,670 : $0.006
32,260 : $0.0062
23,440 : $0.0064
15,155 : $0.0066
6,250 : $0.008

50,000

SZESD7205DT5G

onsemi

TVS DIODE 5VWM 12.5VC SOT723 / 12.5V (Typ) Clamp Ipp Tvs Diode Surface Mount SOT-723
RoHS : Compliant

1,020 : $0.2955
760 : $0.3296
590 : $0.341
430 : $0.3523
275 : $0.3637
115 : $0.4432

48,000

TPS7A7200RGTR

Texas Instruments

IC REG LDO FIX/ADJ 2A 16QFN
RoHS : Compliant

505 : $0.5961
380 : $0.6649
295 : $0.6878
215 : $0.7108
140 : $0.7337
60 : $0.8942

47,320

TPS7A7200RGTT

Texas Instruments

IC REG LDO FIX/ADJ 2A 16QFN
RoHS : Compliant

460 : $0.6566
345 : $0.7324
265 : $0.7576
195 : $0.7829
125 : $0.8081
55 : $0.9849

45,940

PIC16F720-I/SS

Microchip Technology Inc

IC MCU 8BIT 3.5KB FLASH 20SSOP
RoHS : Compliant

172 : $1.9559
129 : $2.1815
100 : $2.2568
73 : $2.332
47 : $2.4072
20 : $2.9337

23,300

BYV27-200-TAP

Vishay Huntington

DIODE AVALANCHE 200V 2A SOD57

1,025 : $0.2932
765 : $0.327
595 : $0.3383
430 : $0.3495
280 : $0.3608
115 : $0.4397

22,610

MAX1720EUTG

onsemi

Charge Pump INV -1.15V to -5.5V 100mA 6-Pin TSOP T/R / IC REG SWTCHD CAP INV 50MA 6TSOP
RoHS : Compliant

90 : $3.3485
67 : $3.7349
52 : $3.8637
38 : $3.9925
25 : $4.1213
10 : $5.0228

12,159

UCC27200DDA

Texas Instruments

120-V Boot, 3-A Peak, High Frequency, High-Side/Low-Side Driver
RoHS : Compliant

155 : $2.1755
116 : $2.4265
90 : $2.5103
65 : $2.5939
42 : $2.6776
18 : $3.2632

7,500

MAX17201G+T

Maxim Integrated Products

IC BATTERY MONITOR 14TDFN
RoHS : Compliant

85 : $3.5455
64 : $3.9546
49 : $4.091
36 : $4.2273
23 : $4.3637
10 : $5.3182

5,000

BQ27200DRKR

Texas Instruments

IC GAS GAUGE LI-ION/LIPOL 10-SON / Fuel Gauge Li-Ion/Li-Pol 10-Pin VSON EP T/R
RoHS : Compliant

48 : $6.3026
36 : $7.0298
28 : $7.2722
20 : $7.5146
13 : $7.757
6 : $9.4539

3,000

ADRF5720BCCZN

Analog Devices Inc

0.5DB LSB,6-BIT,SILICON DIGITAL
RoHS : Compliant

3 : $113.9369
2 : $118.5685
1 : $123.2

727

TPS7201QDRG4

Texas Instruments

IC REG LDO ADJ 0.25A 8SOIC
RoHS : Compliant

51 : $5.9367
38 : $6.6216
30 : $6.85
22 : $7.0783
14 : $7.3066
6 : $8.905

120

HCPL-0720-000E

Broadcom Limited

OPTOISO 3.75KV PUSH PULL 8SO
RoHS : Compliant

52 : $5.879
39 : $6.5573
30 : $6.7834
22 : $7.0095
14 : $7.2356
6 : $8.8184

Wuhan P&S

NCV57200DR2G

onsemi

Half Bridge Gate Driver (Isolated High Side & Non-Isolated Low Side)
RoHS : Compliant

1 : $1.92
100 : $1.23
500 : $1.01
1,000 : $0.93

30,000

7201280ACNLNNTZCWC Reseller

Enlace URL