 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
7612L-S08-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
 Avnet Americas | ECS-.327-6-12-TR | ECS International Inc | Crystal, 32.768 kHz, SMD, 2mm x 1.2mm, 6 pF, 20 ppm, ECX-12 Series - Tape and Reel (Alt: ECS-.327-6-12-TR) RoHS : Compliant |
| 39,000 | |
| ECS-.327-6-1210B-N-TR | ECS International Inc | Crystal, Tuning Fork, 32.768 kHz, SMD, 1.2mm x 1mm x 0.35mm, 6 pF, 20 ppm, ECX-1210B - Tape and Reel (Alt: ECS-.327-6-1210B-N-TR) RoHS : Compliant |
| 15,000 | ||
| 501876-1240 | Molex | Pin Header, 12 Contacts, 2 Rows, 2mm, Matte Tin, 2A, Right Angle, Shrouded, Brass, Wire-to-Board - Trays (Alt: 5018761240) RoHS : Compliant |
| 4,540 | ||
| 00761200 | Toradex Inc | 00761200VERDINAM62QGBWBIT - Trays (Alt: 00761200) RoHS : Compliant |
| 10 | ||
| 214761-2111 | Molex | Cable, UL 10002, Receptacle, Micro-Fit 3.0 to Micro-Fit 3.0, 20 AWG, 75mm L, Tin, Red, Crimp - Bulk (Alt: 77AH5575) RoHS : Not Compliant |
| 0 | ||
| FW-12-05-L-D-376-125-P-TR | Samtec Inc | Board Stackers & Spacers, Pin Header, 9.55 mm, 24 Contacts, Solder, 2 Rows, 1.27 mm, FW Series - Tape and Reel (Alt: FW-12-05-L-D-376-125-P-TR) RoHS : Compliant |
| 0 | ||
| 1SNA167612R2400 | TE Connectivity | - Bag (Alt: 1SNA167612R2400) RoHS : Not Compliant |
| 0 | ||
| 1761259-1 | TE Connectivity | - Bag (Alt: 1761259-1) RoHS : Compliant |
| 0 | ||
| 10-107612-01P | Amphenol Corporation | - Bulk (Alt: 10-107612-01P) RoHS : Not Compliant |
| 0 | ||
| 1-794761-2 | TE Connectivity | - Bulk (Alt: 1-794761-2) RoHS : Compliant |
| 0 | ||
| 501876-1244 | Molex | Pin Header, 12 Contacts, 2 Rows, 2 mm, Tin, Brass, PCB Header, Right Angle, iGrid 501876 Series, 2 A - Bulk (Alt: 5018761244) RoHS : Compliant |
| 0 | ||
| LM2576-12WU | Microchip Technology Inc | 3A STEP-DOWN SMPS REGULATOR - Rail/Tube (Alt: LM2576-12WU) RoHS : Compliant |
| 0 | ||
| BFC237176124 | Vishay Intertechnologies | MKT 120nF ?5% 250Vdc P7,5mm e3 - Tape and Reel (Alt: BFC237176124) RoHS : Compliant |
| 0 | ||
| AW-06-03-G-D-176-125 | Samtec Inc | - Rail/Tube (Alt: AW-06-03-G-D-176-125) RoHS : Compliant |
| 0 | ||
| MAL209076123E3 | Vishay Intertechnologies | - Boxed Product (Development Kits) (Alt: MAL209076123E3) RoHS : Compliant |
| 0 | ||
 Newark | 744761227A | Wurth Elektronik | Wirewound Inductor, 270Nh, 0.17A, 0603; |Würth Elektronik 744761227A RoHS : Compliant |
| 1,550 | |
| 744761227A | Wurth Elektronik | Wirewound Inductor, 270Nh, 0.17A, 0603; |Würth Elektronik 744761227A RoHS : Compliant |
| 1,550 | ||
| MAL215097612E3 | Vishay Intertechnologies | Cap Alu Elec Smd, Radial, 220Uf, 25V; |Vishay MAL215097612E3 RoHS : Compliant |
| 1,460 | ||
| MAL215097612E3 | Vishay Intertechnologies | Cap Alu Elec Smd, Radial, 220Uf, 25V; |Vishay MAL215097612E3 RoHS : Compliant |
| 1,460 | ||
| FMCA2776-12 | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 12", 305Mm, Rg223; |Fairview Microwave FMCA2776-12 RoHS : Compliant |
| 313 | ||
| 214761-2121 | Molex | Cable Assy, Crimp Skt-Free End, 3"; |Molex 214761-2121 RoHS : Compliant |
| 105 | ||
| 76123100 | Lapp Group | Socket, Free, Screw, 5+E Way; |Lapp 76123100 RoHS : Compliant |
| 16 | ||
| 744761220A | Wurth Elektronik | Wirewound Inductor, 200Nh, 0.24A, 0603; |Würth Elektronik 744761220A RoHS : Compliant |
| 14 | ||
| 744761220A | Wurth Elektronik | Wirewound Inductor, 200Nh, 0.24A, 0603; |Würth Elektronik 744761220A RoHS : Compliant |
| 14 | ||
| 214761-2202 | Molex | Cable Assy, Crimp Skt-Free End, 5.9"; |Molex 214761-2202 RoHS : Compliant |
| 12 | ||
| CT3761-2 | Cal Test Electronics | Med. Alligator Clip With 4Mm B-Plug Jack, Red Rohs Compliant: Yes |Cal Test Electronics CT3761-2 RoHS : Compliant |
| 6 | ||
| FMAT7612-30 | Fairview Microwave Inc | Rf Attenuator, N Male-N Female, 30Db; |Fairview Microwave FMAT7612-30 RoHS : Not Compliant |
| 3 | ||
| FMAT7612-8 | Fairview Microwave Inc | Rf Attenuator, N Male-N Female, 8Db; |Fairview Microwave FMAT7612-8 RoHS : Not Compliant |
| 1 | ||
| FMAT7612-10 | Fairview Microwave Inc | Rf Attenuator, N Male-N Female, 10Db; |Fairview Microwave FMAT7612-10 RoHS : Not Compliant |
| 1 | ||
| 7612 | Starrett Company | Gauge Mux 4 Port- Usb- Rs232- Keyboard Output |Starrett 7612 RoHS : Not Compliant |
| 0 | ||
 RS | 20817-612 | nVent Schroff | NVENT SCHROFF INSERTER EXTRACTOR HANDLE TYPE IEL RoHS : Compliant |
| 60 | |
| 1761285 | RS Pro | STRAIGHT MALE - BSPP 6-1/2 |
| 20 | ||
| 1761284 | RS Pro | STRAIGHT MALE - BSPP 6-3/8 |
| 20 | ||
| 1761288 | RS Pro | STRAIGHT FEMALE 6-1/8 |
| 20 | ||
| 1761287 | RS Pro | STRAIGHT FEMALE 4-1/8 |
| 20 | ||
| 1761294 | RS Pro | STRAIGHT FEMALE 4-1/4 |
| 18 | ||
| 37612.150 (SC | LF2Z-M | MSKL 3-12) | icotek Corporation | EMC SHIELD CLAMPS FOR 30 MM DIN RAIL SHAPE C, SC/LF2Z-M/MSKL 3-12 |
| 10 | ||
| 1761290 | RS Pro | STRAIGHT FEMALE 6-1/4 |
| 9 | ||
| 37612.100 (SC | LFZ-M | MSKL 3-12) | icotek Corporation | EMC SHIELD CLAMPS FOR 30 MM DIN RAIL SHAPE C, SC/LFZ-M/MSKL 3-12 |
| 8 | ||
| 1947612 | RS Pro | DIE CAST ALUMINUM GENERAL PURPOSE ENCLOSURE 3.6 X 1.5 X 1.2IN (92 X 38 X 31MM) |
| 5 | ||
| SC7612 | Fairview Microwave Inc | SMA FEMALE (JACK) CONNECTOR NONE TERMINAL 4 HOLE FLANGE (PANEL) DUMMY PANEL MOU RoHS : Compliant |
| 2 | ||
| 1761277 | RS Pro | PNEUMATIC THREADED-TO-TUBE STRAIGHT MALE FITTING G 1/8 TO PUSH IN 6MM 2MPA |
| 1 | ||
| MPDB67612 | Mersen Electrical Power | POWER DISTRIBUTION BLOCK, OPEN STYLE, ALUMINUM, BOX-BOX,2P,1000VAC/DC,350A |
| 1 | ||
| 761204 (761204 CX 100) | Lapp Group | MULTICONDUCTOR CABLE, 4 COND, 12AWG, FOILED BRAIDED, THERMOPLASTIC, VFD SERIES |
| 1 | ||
| 0230-02761 (215 20/1 A WR 56C 1.188) | Hub City | RIGHT ANGLE GEARBOX, 20:1 RATIO, HOLLOW BORE OUT, 56C FRAME, 0.625 IN INPUT |
| 1 | ||
 Microchip Technology Inc | LE87612MQCT | Microchip Technology Inc | 2CH PLC (MIMO) low power AB HPAV2 Driver, T&R, VQFN, Projected EOL: 2046-04-25 RoHS : Compliant |
| 15,000 | |
| LE87612MQC | Microchip Technology Inc | 2CH PLC (MIMO) low power AB HPAV2 Driver, VQFN, Projected EOL: 2046-04-25 RoHS : Compliant |
| 0 | ||
| LM2576-12WU | Microchip Technology Inc | 3A Step-Down SMPS Regulator, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 0 | ||
| LM2576-12WT | Microchip Technology Inc | 3A Step-Down SMPS Regulator, TO-220, Projected EOL: 2035-12-17 RoHS : Compliant |
| 0 | ||
| LM2576-12WU-TR | Microchip Technology Inc | 3A Step-Down SMPS Regulator, DDPAK, Projected EOL: 2041-08-28 RoHS : Compliant |
| 0 | ||
 Bisco Industries | MS51576-12 | Richard Manno & Co | 2,007 | |||
| D8-376-121-191 | Southco | 1,041 | ||||
| 842176124278 | SOCKET SCREWS | 415 | ||||
| 47-61-221-20 | Southco | 198 | ||||
| 47-61-221-65 | Southco | 159 | ||||
| 76120 | Holo-Krome | 142 | ||||
| 47-61-281-64 | Southco | 20 | ||||
| 47-61-201-21 | Southco | 19 | ||||
| 7612A22 | MISCELLANEOUS | 10 | ||||
| 543-7612-02 | Concord Electronics Inc | 10 | ||||
| MS90376-12R | MS Miscellaneous | 6 | ||||
| 14010HSS276-12 | Accurate Screw Machine | 5 | ||||
| 1-1437612 | TE Connectivity | 2 | ||||
| MS51576-12 | MS SOCKET CAP SCREWS | 2 | ||||
| MS27612-7 | B&E Manufacturing | 1 | ||||
 Rochester Electronics | ACS37612LLUATR-010B5 | Allegro MicroSystems LLC | Current Sensor ICs Hall Effect AC/DC Ratiometric, Voltage 8-SOP T/R RoHS : Compliant |
| 3,252 | |
| DAC7612UG4 | Burr-Brown Corp | IC DAC 2 CONV 12Bits R-2R 3-Wire Serial 8-SOIC Tube RoHS : Compliant |
| 5 | ||
HUF76121D3ST | Fairchild Semiconductor Corporation | MOSFET N-Channel 30V 20A (Tc) TO-252-3 T/R RoHS : Not Compliant |
| 76,888 | ||
| HUF76129D3ST | Fairchild Semiconductor Corporation | MOSFET N-Channel 30V 20A (Tc) TO-252-3 T/R RoHS : Not Compliant |
| 9,716 | ||
HUF76129S3S | Fairchild Semiconductor Corporation | MOSFET N-Channel 30V 56A (Tc) TO-263-3 RoHS : Not Compliant |
| 1,850 | ||
| HUF76129D3ST | Harris Semiconductor | MOSFET N-Channel 30V 20A (Tc) TO-252-3 T/R RoHS : Not Compliant |
| 42,200 | ||
| ICL7612BCPA1BI | Harris Semiconductor | Op Amp Standard 1.4MHz 8-DIP RoHS : Not Compliant |
| 3 | ||
ICL7612DCPA | Intersil Corporation | Op Amp Standard 1.4MHz 8-DIP RoHS : Not Compliant |
| 98 | ||
| ISL5761/21A | Intersil Corporation | D/A Converter, Parallel, Word Input Loading RoHS : Not Compliant |
| 146 | ||
ISL5761/2IAZ | Intersil Corporation | IC DAC 1 CONV 10Bits Current Source Parallel 28-SOP Tube RoHS : Compliant |
| 103 | ||
ISL5761/2IBZ | Intersil Corporation | IC DAC 1 CONV 10Bits Current Source Parallel 28-SOIC RoHS : Compliant |
| 130 | ||
ICL7612BCSA-T | Maxim Integrated Products | Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant |
| 10,000 | ||
ICL7612BCTV | Maxim Integrated Products | Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, MBCY8 RoHS : Not Compliant |
| 87 | ||
| LM2576-12WU | Micrel Inc | IC VOLT REG Fixed Step-Down Buck 1 OUT 12V 3A TO-263-6 Tube RoHS : Compliant |
| 5 | ||
HD6417612RFV | Renesas Electronics Corporation | RISC Microcontroller, 32-Bit, 60MHz, CMOS, PQFP176 RoHS : Compliant |
| 307 | ||
 Sager | 2147612122 | Molex | Specialized Cables MICROFIT 3.0 F-S 150MM 18 RoHS : Compliant |
| 0 | |
| 2147612203 | Molex | Specialized Cables MICROFIT 3.0 F-S 225MM 22 RoHS : Compliant |
| 0 | ||
| 0386307612 | Molex | Barrier Terminal Blocks SR BTS PC 50 12 ASY | 0 | |||
| P7-612121 | OTTO Engineering Inc | SUBMINIATURE MOMENTARY ACTION PUSHBUTTON SWITCH |
| 0 | ||
| CA1-X0-10-176-12X-KG | Carling Technologies | Circuit Breakers | 0 | |||
| FW-12-05-L-D-376-125-P-TR | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Micro Board Stacking Header, 0.050 Pitch RoHS : Compliant |
| 0 | ||
| 1SNA167612R2400 | TE Connectivity | DIN Rail Terminal Blocks VIS C S M2.5X19.2 |
| 0 | ||
| 2147612223 | Molex | Specialized Cables MICROFIT 3.0 F-S 225MM 18 RoHS : Compliant |
| 0 | ||
| 2-2151761-2 | TE Connectivity | Crimpers / Crimping Tools OC-PA-S-FA-248F 335F-105-1423 | 0 | |||
| 2147612224 | Molex | Specialized Cables MICROFIT 3.0 F-S 300MM 18 RoHS : Compliant |
| 0 | ||
| 1761259-1 | TE Connectivity | Power to the Board ALIGNMENT PLUG SNAP-ON VR372 |
| 0 | ||
| 1397612-3 | TE Connectivity | Bench Top Tools ADAPTER 1.75 HIGH PRESSBMEP | 0 | |||
| 1-794761-2 | TE Connectivity | Pin & Socket Connectors 09P UMNL CAP HSG,P/MT,V0,RED RoHS : Compliant |
| 0 | ||
| 2147612112 | Molex | Specialized Cables MICROFIT 3.0 F-S 150MM 20 RoHS : Compliant |
| 0 | ||
| 1776121-3 | TE Connectivity | Fixed Terminal Blocks 3P TERMI-BLOK 5.08MM,HIGH TMP RoHS : Compliant | 0 | |||
 TME | 1267612 | Bossard Group | Washer; round; h=0.3mm; M2; D=5mm; steel; zinc; DIN 125A; BN 715 |
| 4,600 | |
| 1676123-6 | TE Connectivity | Resistor: metal oxide; 1.3Ω; THT; 500mW; ±5%; Ø2.5x7.2mm; -55÷155°C RoHS : Compliant |
| 2,770 | ||
| 5-1676123-5 | TE Connectivity | Resistor: metal oxide; 150Ω; THT; 500mW; ±5%; Ø2.5x7.2mm; -55÷155°C RoHS : Compliant |
| 2,250 | ||
| 1676123-8 | TE Connectivity | Resistor: metal oxide; 1.6Ω; THT; 500mW; ±5%; Ø2.5x7.2mm; -55÷155°C RoHS : Compliant |
| 1,560 | ||
| 214761-2103 | Molex | Connector: wire-wire; socket; female; data; Inom: 8.5A; PIN: 1; 22AWG |
| 1,005 | ||
| 1776120000 | Weidmüller Interface GmbH & Co. KG | Comb bridge; yellow RoHS : Compliant |
| 264 | ||
| 07-01-7612 | Plastic Capacitors Inc | Rubber bands; Width: 1.5mm; Thick: 1.5mm; rubber; white; Ø: 60mm; 1kg |
| 23 | ||
| SYS1576-12012-M3 | Sunny Electronics Corp | Power supply: switching; 12VDC; 10A; Out: 5,5/2,1; 120W; 90÷264VAC |
| 18 | ||
| XCSLF3737612 | Telemechanique Sensors | Safety switch: bolting; XCSLF; NC x2 + NO; IP66; metal; red; 24VDC |
| 1 | ||
| 2176125-1 | TE Connectivity | Resistor: metal oxide; 1.5Ω; THT; 20W; ±5%; 60x14x13.5mm; axial RoHS : Compliant |
| 0 | ||
| 2176125-2 | TE Connectivity | Resistor: wire-wound; 10Ω; THT; 20W; ±5%; 60x14x13.5mm; axial RoHS : Compliant |
| 0 | ||
| TPS76125SF5 | HTC Korea | IC: voltage regulator; LDO,linear,fixed; 2.5V; 0.15A; SOT23-5; SMD |
| 0 | ||
| 7-1676123-2 | TE Connectivity | Resistor: metal oxide; 750Ω; THT; 500mW; ±5%; Ø2.5x7.2mm; -55÷155°C RoHS : Compliant |
| 0 | ||
| 76125-74G | KING TONY | Centre punch; with holder |
| 0 | ||
| 7789761200 | Weidmüller Interface GmbH & Co. KG | 7789761200 |
| 0 | ||
 Ameya Holding Limited | TMUX7612PWR | Texas Instruments | RoHS : Compliant | 21,678 | ||
DAC7612U | Texas Instruments | IC: D/A converter; 12bit; Channels: 2; 4.75÷5.25V; SO8 RoHS : Compliant | 64 | |||
 ComSIT USA | HUF76129D3ST | Fairchild Semiconductor Corporation | 20A, 30V, 0.016 OHM, N-CHANNEL, LOGIC LEVEL ULTRAFET POWER MOSFET Power Field-Effect Transistor, 20A I(D), 30V, 0.023ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA RoHS : Not Compliant | 7,500 | ||
| MAL215097612E3 | Vishay Intertechnologies | ALUMINUM ELECTROLYTIC CAPACITOR Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 220uF, Surface Mount, 3131 RoHS : Compliant | 2,000 | |||
| ISL76123AHZ | Intersil Corporation | AUTOMOTIVE SINGLE SUPPLY, SPDT ANALOG SWITCH SPDT, 1 Func, PDSO6 RoHS : Compliant | 1,755 | |||
| LM257612WT | Micrel Inc | 52 kHz Simple 3A Buck Regulator Switching Regulator, 7.5A, 63kHz Switching Freq-Max RoHS : Not Compliant | 300 | |||
| ICL7612DCSA+T | Maxim Integrated Products | Op Amp Single Low Power Amplifier R-R O/P �8V/16V 8-Pin SOIC N T/R RoHS : Compliant | 280 | |||
AD7612BCPZ | Analog Devices Inc | 16-BIT, 750 KSPS, UNIPOLAR/BIPOLAR PROGRAMMABLE INPUT PULSAR ADC ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Parallel, 8 Bits, Parallel, Word Access, CMOS RoHS : Compliant | 237 | |||
| ICL7612DCPA | Intersil Corporation | 1.4MHZ, LOW POWER CMOS OPERATIONAL AMPLIFIER Operational Amplifier, 1 Func, 2000uV Offset-Max, CMOS, PDIP8 RoHS : Not Compliant | 75 | |||
ICL7612DCBAZ | Intersil Corporation | 1.4MHz, Low Power CMOS Operational Amplifier Operational Amplifier, 1 Func, 20000uV Offset-Max, CMOS, PDSO8 RoHS : Compliant | 65 | |||
| ICL7612DESAT | Maxim Integrated Products | SINGLE OPERATIONAL AMPLIFIER Operational Amplifier, 1 Func, 20000uV Offset-Max, CMOS, PDSO8 RoHS : Not Compliant | 64 | |||
| 9681537612 | HARTING Technology Group | D-SUB STD 9P FEM ANGLED BOARD LOCKS D Subminiature Connector, 9 Contact(s), Female, 0.108 inch Pitch, Solder Terminal, #4-40, Plug RoHS : Compliant | 50 | |||
| MP7612BN | MSi | D/A Converter, 1 Func, Serial Input Loading, 30us Settling Time, PDIP28 RoHS : Not Compliant | 48 | |||
| ICL7612BMTV | Maxim Integrated Products | OPERATIONAL AMPLIFIER Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, MBCY8 RoHS : Not Compliant | 13 | |||
 Interstate Connecting Components | M28876/12C11S1 | Glenair Inc | 28876 J/N RECP 8C SKT W/ STR B/S |
| 1 | |
| 10-761276-125 | Amphenol Industrial Operations | 5.7 SL+ REC BK M4 SCREW TYPE | 0 | |||
| 121537-6125 | ITT Interconnect Solutions | VG96929B116FNJ | 0 | |||
| 3-1676123-1 | TE Connectivity | 1/2W SM M/OX 5% 15R RoHS : Compliant |
| 0 | ||
| M28876/12B12P4 | Amphenol Fiber Systems International | FIBER JN RCPT 4 CHNL MIL WITH STRT BKSHL |
| 0 | ||
| M28876/12B12P4 | Glenair Inc | 28876 J/N RECP 4C PIN w/ STR B/S |
| 0 | ||
| M28876/12C11S1 | Amphenol Fiber Systems International | FIBER JN RCPT 8 CHNL MIL WITH STRT BKSHL |
| 0 | ||
| M28876/12C21P3 | Glenair Inc | 28876 J/N RECP 6C PIN w/ STR B/S |
| 0 | ||
| 1SNA167612R2400 | TE Connectivity | VIS C S M2.5X19.2 | 0 | |||
| 2-1676123-2 | TE Connectivity | 1/2W SM M/OX 5% 6R2 RoHS : Compliant |
| 0 | ||
| 2-1676123-3 | TE Connectivity | 1/2W SM M/OX 5% 6R8 RoHS : Compliant |
| 0 | ||
| 1761259-1 | TE Connectivity | ALIGNMENT PLUG SNAP-ON VR372 |
| 0 | ||
| 10-107612-01P | Amphenol Aerospace | PLUG 10-107612-01P | 0 | |||
| M28876/12B13P6 | Glenair Inc | 28876 J/N RECP 4C PIN w/ STR B/S |
| 0 | ||
| M28876/12C12S3 | Glenair Inc | 28876 J/N RECP 8C SKT w/ STR B/S |
| 0 | ||
 PEI Genesis | C10-670176-12D | Amphenol Corporation |
| 65 | ||
| J1176-12 | SOURIAU-SUNBANK |
| 0 | |||
| 10-729876-12H | Amphenol Corporation |
| 0 | |||
| J176-126-2A | SOURIAU-SUNBANK |
| 0 | |||
| J176-1210-3A | SOURIAU-SUNBANK |
| 0 | |||
| M85049/76-12W02 | Amphenol PCD |
| 0 | |||
| M85049/76-12W02 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/76-12Z02 | Amphenol PCD |
| 0 | |||
| M28876/12B11P1 | Amphenol Corporation |
| 0 | |||
| M85049/76-12Z04 | Amphenol PCD |
| 0 | |||
| 514-7612-0111-302 | Dialight |
| 0 | |||
| M85049/76-12N02 | Amphenol PCD |
| 0 | |||
| M85049/76-12N02 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/76-12W03 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/76-12W03 | Amphenol PCD |
| 0 | |||
 Powell Electronics | 5-1676123-9 | TE Connectivity | Resistors RoHS : Compliant |
| 19,800 | |
| 1-1676123-9 | TE Connectivity | Resistors RoHS : Compliant |
| 19,800 | ||
| 9-1676123-9 | TE Connectivity | Resistors RoHS : Compliant |
| 16,500 | ||
| 1-794761-2 | TE Connectivity | 09P UMNL CAP HSG,P/MT,V0,RED RoHS : Compliant |
| 7,524 | ||
| 031-70576-12G | Amphenol RF | RF Connector BNC Straight PCB Jack Throu |
| 479 | ||
| 476126-000 | TE Connectivity | Labels and Industrial Warning Signs RoHS : Compliant |
| 396 | ||
| CA761/2 | Altech Corporation | Internal Jumper, Screw, 12mm spacing, 2 |
| 230 | ||
| ZW-04-08-T-S-276-127 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 216 | ||
| ZW-05-19-T-S-1076-127 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 178 | ||
| 205761-2 | TE Connectivity | Connectors |
| 154 | ||
| 19C150PV4K/SZ76121 | Honeywell Sensing and Control | Switch |
| 110 | ||
| C10-670176-12D | Amphenol Corporation | CONTACT SOCKET SZ 12 |
| 43 | ||
| M85049/76-12Z02 | Glenair Inc | ACCESSORIES - RFI/EMI ENVIRON ADAPTER |
| 22 | ||
| M85049/76-12Z04 | Glenair Inc | ACCESSORIES - RFI/EMI ENVIRON ADAPTER |
| 18 | ||
| M85049/76-12W02 | Amphenol PCD | Envrn-EMI/RFI |
| 12 | ||
 PUI | 12.97612 | 12,700 | ||||
 Richardson RFPD | R141A676121 | Radiall | Conn BNC RCP 0Hz to 1GHz 50Ohm Solder RA Thru-Hole RoHS : Compliant | 0 | ||
ADV7612BSWZ-P | Analog Devices Inc | HDMI Receiver 2RX 100-Pin LQFP EP Tray RoHS : Compliant | 0 | |||
| 031-70576-12G | Amphenol Corporation | Conn BNC 0Hz to 12GHz 75Ohm Solder ST Thru-Hole RC RoHS : Compliant |
| 0 | ||
| EVAL-ADV7612-7511 | Analog Devices Inc | ADV7612 Transceiver Evaluation Board RoHS : Compliant | 0 | |||
| 20017612-31 | TE Connectivity | Liquid Level Sensor RoHS : Not Compliant | 0 | |||
| R124176123 | Radiall | Conn SMA PL 0Hz to 12.4GHz 50Ohm Crimp RA Cable Mo RoHS : Compliant |
| 0 | ||
| R125076121 | Radiall | Conn SMA 0Hz to 12.4GHz 50Ohm Crimp ST Cable Mount RoHS : Compliant | 0 | |||
| ATS-EXL76-1220-R0 | Advanced Thermal Solutions Inc | Heat Sinks Extrusion Profile, AL6063 RoHS : Compliant | 0 | |||
| AD7612BCPZ-RL | Analog Devices Inc | 1-Channel Single ADC SAR 750ksps 16-bit Parallel/S RoHS : Compliant |
| 0 | ||
AD7612BSTZ-RL | Analog Devices Inc | 1-Channel Single ADC SAR 750ksps 16-bit Parallel/S RoHS : Compliant |
| 0 | ||
| 07276121 | SEMIKRON | SCR Module 2200V 700A(RMS) 15000A 5-Pin Case A-60a RoHS : Compliant | 0 | |||
| R125076120 | Radiall | Conn SMA 0Hz to 12.4GHz 50Ohm Crimp ST Cable Mount RoHS : Compliant |
| 0 | ||
| 9076-1213-000 | Radiall | Conn SMA RCP 50Ohm ST Panel Mount Gold RoHS : Not Compliant | 0 | |||
| SI87612AB-IM3 | Skyworks Solutions Inc | SI87612AB-IM3 RoHS : Compliant |
| 0 | ||
| SI87612AB-IM3R | Skyworks Solutions Inc | SI87612AB-IM3R RoHS : Compliant |
| 0 | ||
 Avnet Abacus | ECS-.327-6-12R-TR | ECS International Inc | Crystal 32768 kHz SMD 2mm x 12mm 6 pF 20 ppm ECX12R Series - Tape and Reel (Alt: ECS-.327-6-12R-TR) RoHS : Compliant | 51,000 | ||
| 10157376-12101LF | Amphenol Corporation | - Tape and Reel (Alt: 10157376-12101LF) RoHS : Compliant | 12,000 | |||
| ECS-.327-6-12-TR | ECS International Inc | Crystal 32768 kHz SMD 2mm x 12mm 6 pF 20 ppm ECX12 Series - Tape and Reel (Alt: ECS-.327-6-12-TR) RoHS : Compliant | 9,000 | |||
| 1776126 | Phoenix Contact | MSTB 25 6STZ508 MSTB256STZ508 (Alt: 1776126) RoHS : Compliant | 150 | |||
| 1761259-1 | TE Connectivity | (Alt: 1761259-1) RoHS : Compliant | 0 | |||
| 1776120-8 | TE Connectivity | 8P TERMIBLOK50MMHIGH TEMP (Alt: 1776120-8) RoHS : Compliant | 0 | |||
| 2147612224 | Molex | (Alt: 2147612224) RoHS : Compliant | 0 | |||
| 2147612224 | Molex | (Alt: 2147612224) RoHS : Compliant | 0 | |||
| 2147612112 | Molex | PreCrimped Lead MicroFit 30 FemaletoPigtail (Alt: 2147612112) RoHS : Compliant | 0 | |||
| 2147612112 | Molex | (Alt: 2147612112) RoHS : Compliant | 0 | |||
| M20-9761242 | Harwin | 254mm 01 Pitch DIL Vertical PC Tail Pin Header 58mm mating pin height selective gold tin (Alt: M20-9761242) RoHS : Compliant | 0 | |||
| BFC234761273 | Vishay Intertechnologies | Film Capacitor 0027 uF 200 V 10 630 V PET Radial Box 2 Pin (Alt: BFC234761273) RoHS : Compliant | 0 | |||
| MAL215776121E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor 120 uF 400 V 20 SnapIn (Alt: MAL215776121E3) RoHS : Compliant | 0 | |||
| M85049/76-12W02 | Amphenol Corporation | (Alt: M85049/76-12W02) RoHS : Not Compliant | 0 | |||
| ECS-.327-6-1210B-P-TR | ECS International Inc | Crystal 32768kHz 6pF 4Pin SMD TR - Tape and Reel (Alt: ECS-.327-6-1210B-P-TR) RoHS : Compliant | 0 | |||
Avnet Asia | QPF7612QSR | Qorvo | MHB RF FUSION MODULE (Alt: QPF7612QSR) RoHS : Compliant | 0 | ||
| C10-761296-Z2S | Amphenol Corporation | CIRCULAR CONNECTOR (Alt: C10-761296-Z2S) RoHS : Compliant | 0 | |||
| MAL215097612E3 | Vishay Intertechnologies | SMD Aluminium Electrolytic Capacitor, Radial Can - SMD, 220 uF, 25 V, 2500 hours @ 105?C, Polar (Alt: MAL215097612E3) RoHS : Compliant | 0 | |||
| 5018761240 | Molex | Pin Header, 12 Contacts, 2 Rows, 2mm, Matte Tin, 2A, Right Angle, Shrouded, Brass, Wire-to-Board (Alt: 5018761240) RoHS : Compliant | 0 | |||
| QPF7612QTR13 | Qorvo | LB PAMID LTE PA MODULE (Alt: QPF7612QTR13) RoHS : Compliant | 0 | |||
| ECS-.327-6-1210B-N-TR | ECS International Inc | Crystal, Tuning Fork, 32.768 kHz, SMD, 1.2mm x 1mm x 0.35mm, 6 pF, 20 ppm, ECX-1210B (Alt: ECS-.327-6-1210B-N-TR) RoHS : Compliant | 0 | |||
| 10170761-201A001LF | Amphenol Corporation | FCI10170761-201A001LF PWRMAX RAH 2LP+6S+ (Alt: 10170761-201A001LF) RoHS : Compliant | 0 | |||
| 22337612 | Qnity Laird | COOLZORB ULTRA (Alt: 22337612) RoHS : Compliant | 0 | |||
| ECS-.327-6-12-TR | ECS International Inc | Crystal, 32.768 kHz, SMD, 2mm x 1.2mm, 6 pF, 20 ppm, ECX-12 Series (Alt: ECS-.327-6-12-TR) RoHS : Compliant |
| 0 | ||
| NCV76124MW0R2G | onsemi | (Alt: NCV76124MW0R2G) RoHS : Compliant | 0 | |||
 Avnet Silica | ICL7612DCBAZ | Renesas Electronics Corporation | OP Amp Single GP 8V16V 8Pin SOIC N (Alt: ICL7612DCBAZ) RoHS : Compliant | 1,960 | ||
| LM2576-12WU | Microchip Technology Inc | 3A STEPDOWN SMPS REGULATOR (Alt: LM2576-12WU) RoHS : Compliant | 0 | |||
| LE87612MQCT | Microchip Technology Inc | IC Line Driver 100mA 28Pin QFN TR (Alt: LE87612MQCT) RoHS : Compliant | 0 | |||
| LM2576-12WT | Microchip Technology Inc | 3A STEPDOWN SMPS REGULATOR (Alt: LM2576-12WT) RoHS : Compliant | 0 | |||
| ICL7612DCPAZ | Renesas Electronics Corporation | (Alt: ICL7612DCPAZ) RoHS : Compliant | 0 | |||
| LM2576-12WU-TR | Microchip Technology Inc | (Alt: LM2576-12WU-TR) RoHS : Compliant | 0 | |||
| 5962-8761201DA | Teledyne HiRel | NOR Gate Quad 2 Input 14 Pins CFP (Alt: 5962-8761201DA) RoHS : Not Compliant | 0 | |||
| ICL7612DCBAZ-T | Renesas Electronics Corporation | (Alt: ICL7612DCBAZ-T) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | 78207-612 | Amphenol FCi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 400 | |
| 67612-9703 | Molex | IN STOCK SHIP TODAY | 198 | |||
| HUF76129D3ST | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant | 52 | |||
| ICL7612BCPA | Maxim Integrated Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 48 | ||
 DB Roberts | 47-61-201-64 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | ||
| 47-61-210-55 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-61-232-15 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-61-292-55 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 76120322300 | Essentra Components | LATCH, CAM QTR TURN EASY INSTA | 0 | |||
| 47-61-221-25 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-61-232-50 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-61-281-65 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| D3-376-122-191 | Southco | D3-376-122-191 | 0 | |||
| 07612-02001 | Avdel | 0 | ||||
| 47-61-281-24 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 47-61-290-15 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 4976-12 | HeliCoil | 0 | ||||
| 47-61-241-25 | Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | 0 | |||
| 76120032300 | Essentra Components | LATCH, CAM QTR TURN EASY INSTA | 0 | |||
 EBV Elektronik | LM2576-12WU | Microchip Technology Inc | 3A STEPDOWN SMPS REGULATOR (Alt: LM2576-12WU) RoHS : Compliant | 0 | ||
| LE87612MQCT | Microchip Technology Inc | IC Line Driver 100mA 28Pin QFN TR (Alt: LE87612MQCT) RoHS : Compliant | 0 | |||
| LM2576-12WT | Microchip Technology Inc | 3A STEPDOWN SMPS REGULATOR (Alt: LM2576-12WT) RoHS : Compliant | 0 | |||
| LM2576-12WU-TR | Microchip Technology Inc | (Alt: LM2576-12WU-TR) RoHS : Compliant | 0 | |||
| NCV76124MW0R2G | onsemi | Rain and Light Sensor Interface with SPI Rain and light sensor interface with SPI (Alt: NCV76124MW0R2G) RoHS : Compliant | 0 | |||
 Flip Electronics | XR76121ELTR-F | MaxLinear Inc | Stock, Ship Today RoHS : Compliant |
| 95,000 | |
| XR76121EL-F | MaxLinear Inc | Stock RoHS : Compliant | 95,000 | |||
 Maritex | 5018761240 | Molex | Male Pin Headers; 5018761240; MOLEX; 2; Right Angle; Tin; 12 RoHS : Compliant |
| 484 | |
 Master Electronics | 121537-6125 | ITT Interconnect Solutions | Circular Connector - Receptacle - Spring Contact (Socket) - Shell Size 16 - Contact Size 25mm² - 180° - Bayonet Coupling - IPX8 - Wall (Flange) Mount. RoHS : Compliant |
| 0 | |
| 3-1676123-1 | TE Connectivity | 1/2W SM M/OX 5% 15R RoHS : Compliant |
| 0 | ||
| FW-02-03-G-D-176-127 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-LM-D-176-123 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-02-03-S-D-276-122 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FW-12-05-L-D-376-125-P-TR | Samtec Inc | .050 Flex Stack Flexible Micro Board Stacker Surface Mount RoHS : Compliant |
| 0 | ||
| 2-1676123-2 | TE Connectivity | 1/2W SM M/OX 5% 6R2 RoHS : Compliant |
| 0 | ||
| 2176123-7 | TE Connectivity | CPF 0805 3K3 1% 15PPM 5K RL RoHS : Compliant |
| 0 | ||
| 2-1676123-3 | TE Connectivity | 1/2W SM M/OX 5% 6R8 RoHS : Compliant |
| 0 | ||
| 214761-2111 | Molex | Micro-Fit 3.0 Female-to-Pigtail - Tin (Sn) Plated - 75.00mm Length - 20 AWG - Red RoHS : Compliant |
| 0 | ||
| 2176123-8 | TE Connectivity | CPF 0805 3K9 1% 15PPM 5K RL RoHS : Compliant |
| 0 | ||
| 1761259-1 | TE Connectivity | ALIGNMENT PLUG SNAP-ON VR372 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1397612-3 | TE Connectivity | ADAPTER 1.75 HIGH PRESS RoHS : Compliant |
| 0 | ||
| ZPF000000000007612 | TE Connectivity | 983-0SE 16-24 S6 L MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1-1676123-0 | TE Connectivity | 1/2W SM M/OX 5% 2R0 RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C3076-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to TNC Male Low Loss Cable 12 Inch Length Using LMR-240-UF Coax with Times Microwave Components., Radio frequency assembly SMA male to TNC male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our low loss SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C3076-12 can also be known as a low loss SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C3076-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3076-12 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male low loss cable 12 inch length using LMR-240-UF coax with Times Microwave components. |
| 3,554 | |
| PE3W16476-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG303/U, RF Cable Type: RG303, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity TNC Male Right Angle to N Female Bulkhead Cable 12 Inch Length Using RG303 Coax., Radio frequency assembly reverse polarity TNC male right angle to N female bulkhead cable 12 inch length using RG303 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The reverse polarity TNC male right angle to N female bulkhead cable 12 inch length using RG303 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle reverse polarity TNC cable connection on one end and a type N bulkhead cable connection on the other. Our right angle reverse polarity TNC to type N cable assembly has a male gender on end 1 and a female on end 2. PE3W16476-12 can also be known as a right angle reverse polarity TNC plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W16476-12 RF cable has a FEP jacket of 0.170-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Reverse polarity TNC plug to type N jack cable assembly PE3W16476-12 is built with RG303 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with right angle TNC to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W16476-12 can also be used in the other direction and will be a type N female bulkhead to right angle reverse polarity TNC male cable assembly if the opposite connectivity is required. TNC reverse polarity right angle plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to type N RF cable assembly as per your requirements. |
| 324 | ||
| PE3C4876-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: BMA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: 2 Hole Flange, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length: 12 inches. Slide-On BMA Jack Right Angle 2 Hole Flange to Slide-On BMA Jack Right Angle 2 Hole Flange Cable 12 Inch Length Using RG405 Coax., Radio frequency assembly slide-on BMA jack right angle 2 hole flange to slide-on BMA jack right angle 2 hole flange cable 12 inch length using RG405 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Slide-on BMA jack right angle 2 hole flange to slide-on BMA jack right angle 2 hole flange cable 12 inch length using RG405 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BMA to BMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle BMA 2 hole flange cable connection on one end and right angle BMA 2 hole flange cable connection on the other. Our right angle BMA to right angle BMA cable assemblies have a jack gender on end 1 and jack on end 2. This BMA to BMA cable is a jack to jack coax assembly, PE3C4876-12, can also be known as a right angle BMA female to right angle BMA female cable assembly and will be shipped same-day as it is purchased. BMA female to BMA female cable assembly PE3C4876-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid BMA cable assembly is manufactured with right angle BMA to right angle BMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency BMA right angle jack 2 hole flange to BMA right angle jack 2 hole flange cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BMA right angle female 2 hole flange to BMA right angle female 2 hole flange cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BMA to BMA cable assembly for quick shipment worldwide. Variations of BMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this slide-on BMA jack right angle 2 hole flange to slide-on BMA jack right angle 2 hole flange cable 12 inch length using RG405 coax. |
| 152 | ||
| PE3C6376-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-500, RF Cable Type: SPF-500, RF Cable Impedance: 50 Ohm, Length: 12 inches. Fire Rated N Male Right Angle to N Male Right Angle Low PIM Cable 12 Inch Length Using SPF-500 Coax Using Times Microwave Parts., Radio frequency assembly fire rated N male right angle to N male right angle low PIM cable 12 inch length using SPF-500 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated N male right angle to N male right angle low PIM cable 12 inch length using SPF-500 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPO500-NM-RA-LP type N to TC-SPO500-NM-RA-LP N type cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle TC-SPO500-NM-RA-LP type N cable connection on one end and right angle TC-SPO500-NM-RA-LP type N cable connection on the other. Our low PIM right angle TC-SPO500-NM-RA-LP type N to right angle TC-SPO500-NM-RA-LP N type cable assemblies have a male gender on end 1 and male on end 2. This TC-SPO500-NM-RA-LP type N to TC-SPO500-NM-RA-LP type N cable is a male to male coax assembly, PE3C6376-12, can also be known as a low PIM right angle TC-SPO500-NM-RA-LP N type plug to right angle TC-SPO500-NM-RA-LP type N plug cable assembly and will be shipped same-day as it is purchased. TC-SPO500-NM-RA-LP type N plug to TC-SPO500-NM-RA-LP N type plug cable assembly PE3C6376-12 is built with SPF-500 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPO500-NM-RA-LP N cable assembly is manufactured with right angle TC-SPO500-NM-RA-LP type N to right angle TC-SPO500-NM-RA-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM TC-SPO500-NM-RA-LP N type right angle male to TC-SPO500-NM-RA-LP type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM TC-SPO500-NM-RA-LP type N right angle plug to TC-SPO500-NM-RA-LP type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPO500-NM-RA-LP N type to TC-SPO500-NM-RA-LP type N cable assembly for quick shipment worldwide. Variations of TC-SPO500-NM-RA-LP N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male right angle to N male right angle low PIM cable 12 inch length using SPF-500 coax using Times Microwave parts. |
| 137 | ||
| PE7612-4 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 4 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Passivated Stainless Steel, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 4 dB Fixed Attenuator N-Type Male to N-Type Female Passivated Stainless Steel Body Rated 2 Watt DC to 18GHz. PE7612-4 is a 4 dB fixed attenuator from Pasternack. This 4 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 0.8 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with passivated stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 4 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 4 dB. The Pasternack PE7612-4 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentaion, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7612-4 will ship the same business day as purchased from Pasternack’s production facility. This 4 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 8 | ||
| PE7612-1 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 1 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Passivated Stainless Steel, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 1 dB Fixed Attenuator N-Type Male to N-Type Female Passivated Stainless Steel Body Rated 2 Watt DC to 18GHz. PE7612-1 is a 1 dB fixed attenuator from Pasternack. This 1 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 0.8 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with passivated stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 1 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 1 dB. The Pasternack PE7612-1 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentaion, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7612-1 will ship the same business day as purchased from Pasternack’s production facility. This 1 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 7 | ||
| PE3W06076-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male Right Angle to BNC Male Right Angle Low Loss Cable 12 Inch Length Using LMR-240-UF Coax., Radio frequency assembly BNC male right angle to BNC male right angle low loss cable 12 inch length using LMR-240-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male right angle to BNC male right angle low loss cable 12 inch length using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle BNC cable connection on one end and right angle BNC cable connection on the other. Our low loss right angle BNC to right angle BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W06076-12 can also be known as a low loss right angle BNC plug to right angle BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W06076-12 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to right angle BNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC right angle male to BNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC right angle plug to BNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male right angle to BNC male right angle low loss cable 12 inch length using LMR-240-UF coax. |
| 0 | ||
| PE3576-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to BNC Female Cable Using RG58 Coax, RoHS in 12 Inch., Radio frequency assembly SMA male to BNC female cable using RG58 coax, RoHS in 12 inch from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to BNC female cable using RG58 coax, RoHS in 12 inch, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and female on end 2. This SMA to BNC cable is a male to female coax assembly, PE3576-12, can also be known as a SMA plug to BNC jack cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC jack cable assembly PE3576-12 is built with RG58 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3576-12 can also be used in the other direction and will be BNC female to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC female cable using RG58 coax, RoHS in 12 inch. |
| 0 | ||
| PE3176-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to TNC Male Cable 12 Inch Length Using RG214 Coax., Radio frequency assembly SMA male to TNC male cable 12 inch length using RG214 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to TNC male cable 12 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and TNC cable connection on the other. Our SMA to TNC cable assemblies have a male gender on end 1 and male on end 2. This SMA to TNC cable is a male to male coax assembly, PE3176-12, can also be known as a SMA plug to TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3176-12 is built with RG214 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3176-12 can also be used in the other direction and will be TNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male cable 12 inch length using RG214 coax. |
| 0 | ||
| PE3W20676-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Jack, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity BNC Jack to BNC Male Cable 12 Inch Length Using RG223 Coax., Pasternack’s PE3W20676-12 BNC jack to BNC male RF cable assembly using RG223 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC jack to BNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a reverse polarity BNC cable connection on one end and a BNC cable connection on the other. Our reverse polarity BNC to BNC cable assembly has a jack gender on end 1 and a male on end 2. PE3W20676-12 can also be known as a reverse polarity BNC female to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W20676-12 RF cable has a pvc jacket of 0.209-inch diameter. The flexible RF cable has an in-series connection. This PE3W20676-12 reverse polarity BNC female to BNC plug cable assembly is built with RG223, which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3W20676-12 can also be used in the other direction and will be a BNC male to reverse polarity BNC jack cable assembly if the opposite connectivity is required. This BNC reverse polarity female to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC RF cable assembly as per your requirements. |
| 0 | ||
| PE37576-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Reverse Polarity SMA Plug Right Angle to MMCX Plug Right Angle Cable 12 Inch Length Using RG174 Coax., Radio frequency assembly reverse polarity SMA plug right angle to MMCX plug right angle cable 12 inch length using RG174 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Reverse polarity SMA plug right angle to MMCX plug right angle cable 12 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMCX cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle reverse polarity SMA cable connection on one end and right angle MMCX cable connection on the other. Our right angle reverse polarity SMA to right angle MMCX cable assembly has plug gender on end 1 and plug on end 2. PE37576-12 can also be known as a right angle reverse polarity SMA male to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PE (LD) dielectric type. Reverse polarity SMA male to MMCX male cable assembly PE37576-12 is built with RG174 which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with right angle SMA to right angle MMCX cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE37576-12 RF cable are available on our downloadable PDF datasheet.PE37576-12 can also be used in the other direction and will be right angle MMCX plug to right angle reverse polarity SMA plug cable assembly if the opposite connectivity is required. SMA reverse polarity right angle male to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W08176-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMP, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Limited Detent SMP Male Bulkhead to SMP Female Right Angle Cable 12 Inch Length Using RG405 Coax., Radio frequency assembly limited detent SMP male bulkhead to SMP female right angle cable 12 inch length using RG405 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Limited detent SMP male bulkhead to SMP female right angle cable 12 inch length using RG405 coax, SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMP bulkhead cable connection on one end and right angle SMP cable connection on the other. Our SMP to right angle SMP cable assemblies have a male gender on end 1 and female on end 2. PE3W08176-12 can also be known as a SMP plug to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP plug to SMP jack cable assembly PE3W08176-12 is built with RG405 which is a semi-rigid coax type. The Pasternack semi-rigid SMP cable assembly is manufactured with SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMP male bulkhead to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08176-12 can also be used in the other direction and will be right angle SMP female to SMP male bulkhead cable assembly if the opposite connectivity is required. SMP plug bulkhead to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this limited detent SMP male bulkhead to SMP female right angle cable 12 inch length using RG405 coax. |
| 0 | ||
| PE3C3876-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. BNC Male Right Angle to N Female Bulkhead Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly BNC male right angle to N female bulkhead cable 12 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male right angle to N female bulkhead cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle BNC cable connection on one end and a type N bulkhead cable connection on the other. Our right angle BNC to type N cable assembly has a male gender on end 1 and a female on end 2. PE3C3876-12 can also be known as a right angle BNC plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3C3876-12 RF cable has a FEP jacket of 0.098-inch diameter. The flexible RF cable has a between series connection. Our right angle BNC male to bulkhead type N female cable has a maximum VSWR of 1.5:1. BNC plug to type N jack cable assembly PE3C3876-12 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with right angle BNC to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C3876-12 can also be used in the other direction and will be a type N female bulkhead to right angle BNC male cable assembly if the opposite connectivity is required. BNC right angle plug to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to type N cable assembly for quick shipment worldwide. Variations of BNC and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to type N RF cable assembly as per your requirements. |
| 0 | ||
| PE3C10076-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 3.5mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 3.5mm Male to TNC Male Cable 12 Inch Length Using PE-SR402FL Coax., Radio frequency assembly 3.5mm male to TNC male cable 12 inch length using PE-SR402FL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 3.5mm male to TNC male cable 12 inch length using PE-SR402FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 3.5mm to TNC cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a 3.5mm cable connection on one end and a TNC cable connection on the other. Our a 3.5mm to a TNC cable assembly has male gender on end 1 and male on end 2. PE3C10076-12 can also be known as a 3.5mm plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.625-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 110 dB. 3.5mm plug to TNC plug cable assembly PE3C10076-12 is built with PE-SR402FL which is a formable coax type. The Pasternack formable 3.5mm cable assembly is manufactured with 3.5mm to TNC cable connectors and has a 50 Ohm impedance. One connector features the clamp/solder attachment method and a passivated stainless steel body with plating, while the other has the solder/solder attachment method and brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C10076-12 can also be used in the other direction and will be TNC male to 3.5mm male cable assembly if the opposite connectivity is required. 3.5mm plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 3.5mm to TNC cable assembly for quick shipment worldwide. Variations of 3.5mm and TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 3.5mm to TNC RF cable assembly as per your requirements. |
| 0 | ||
| PE3W04376-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MCX Plug to Water Blue FAKRA Jack Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly MCX plug to water blue FAKRA jack cable 12 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug to water blue FAKRA jack cable 12 inch length using RG316 coax, MCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MCX cable connection on one end and FAKRA cable connection on the other. Our MCX to FAKRA cable assemblies have a plug gender on end 1 and jack on end 2. PE3W04376-12 can also be known as a MCX male to FAKRA female cable assembly and will be shipped same-day as it is purchased. MCX male to FAKRA female cable assembly PE3W04376-12 is built with RG316 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with MCX to FAKRA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency MCX plug to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04376-12 can also be used in the other direction and will be FAKRA jack to MCX plug cable assembly if the opposite connectivity is required. MCX male to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to FAKRA cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MCX plug to water blue FAKRA jack cable 12 inch length using RG316 coax. |
| 0 | ||
 Teledyne HiRel | 5962-8761201DA | Teledyne HiRel | NOR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | ||
| 5962-87612012A | Teledyne HiRel | NOR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
| 5962-8761201CA | Teledyne HiRel | NOR GATE, QUAD 2-INPUT RoHS : Not Compliant | 0 | |||
 Vyrian | MAL215876123E3 | Vishay Intertechnologies | Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 20% +Tol, 20% -Tol, 12000uF, Through Hole Mount RoHS : Compliant | 15,728 | ||
| 2917612 | Phoenix Contact | Off-Delay Relay, SPDT, Momentary, 30VDC (Coil), 0.1s Adj Min, 10s Adj Max, DIN-Rail Mount RoHS : Compliant | 13,257 | |||
| MAX17612BATB-T | Analog Devices (Maxim Integrated) | 11,203 | ||||
| ADV7612BSWZ-P | Analog Devices Inc | Line Receiver, 1 Func, 1 Rcvr, CMOS, PQFP100 RoHS : Compliant | 10,002 | |||
| MAX17612BEVKIT | Analog Devices (Maxim Integrated) | 9,332 | ||||
| ICL7612DCSA+T | Analog Devices Inc | Operational Amplifier, 1 Func, 20000uV Offset-Max, CMOS, PDSO8 RoHS : Compliant | 7,689 | |||
| EVAL-ADV7612-7511 | Analog Devices Inc | Development kits/Accessories RoHS : Compliant | 7,510 | |||
5962F8761201VXA | STMicroelectronics | RoHS : Compliant | 7,186 | |||
| ACMD-7612-TR1 | Broadcom Limited | Duplexer RoHS : Compliant | 6,270 | |||
5962-87612022X | Texas Instruments | NOR Gate, AC Series, 4-Func, 2-Input, CMOS, CQCC20 | 5,871 | |||
| KTM0076/128 | Kingston Technology Company | 4,776 | ||||
| ACMD-7612-BLK | Broadcom Limited | RoHS : Compliant | 4,597 | |||
| 5962-8761202EX | Texas Instruments | NOR Gate, AC Series, 4-Func, 2-Input, CMOS, CDIP16 | 4,563 | |||
| 5962-8761202FA | Texas Instruments | 4,093 | ||||
| VB027(6)-12-E | STMicroelectronics | 3,398 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Mexican ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
British
New Zealand