7784-R1 Price, Reseller, Stock

1 : $131.489
5 : $131.489
10 : $113.788
25 : $97.0
50 : $97.0
100 : $93.921
250 : $91.031
500 : $88.313
1,000 : $85.754
2,500 : $84.529
10,000 : $84.529

126

MS27784-27

Honeywell Sensing and Control

Switches

MS27784-21

Honeywell Sensing and Control

Switches

1 : $102.689
5 : $102.689
10 : $88.865
25 : $75.754
50 : $75.754
100 : $73.349
250 : $71.092
500 : $68.97
1,000 : $66.971
2,500 : $66.014
10,000 : $66.014

747784-3

TE Connectivity

Rectangular Con
RoHS : Compliant

1 : $1.885
5 : $1.885
10 : $1.664
25 : $1.571
50 : $1.571
100 : $1.515
250 : $1.463
500 : $1.463
1,000 : $1.414
2,500 : $1.414
10,000 : $1.368

747784-8

TE Connectivity

Rectangular Con
RoHS : Compliant

1 : $5.133
5 : $5.133
10 : $4.529
25 : $4.278
50 : $4.278
100 : $4.125
250 : $3.983
500 : $3.983
1,000 : $3.85
2,500 : $3.85
10,000 : $3.726

MS27784-21

Safran Electrical & Power UK

Switches

MS27784-29

Safran Electrical & Power UK

Switches

MS27784-29

Honeywell Sensing and Control

Switches

MS27784-33

Safran Electrical & Power UK

Switches

MS27784-27

Safran Electrical & Power UK

Switches

MS27784-31

Safran Electrical & Power UK

Switches

1 : $173.0
5 : $173.0
10 : $149.712
25 : $127.623
50 : $127.623
100 : $123.571
250 : $119.769
500 : $116.194
1,000 : $112.826
2,500 : $111.214
10,000 : $111.214

MS27784-31

Honeywell Sensing and Control

Switches

MS27784-26

Honeywell Sensing and Control

Switches

MS27784-32

Safran Electrical & Power UK

Switches

Maritex

747784-8

TE Connectivity

D-Sub Connectors; 747784-8; TE CONNECTIVITY; Male; 48.76 mm; Straight
RoHS : Compliant

1 : $5.5467

1777846

Phoenix Contact

Plug & Socket Connectors; 1777846; PHOENIX CONTACT; 1; 3; Green; 35.3 mm
RoHS : Compliant

1,000 : $3.733
500 : $4.04
150 : $4.466
50 : $5.08
10 : $6.362
1 : $8.4026

Master Electronics

7784

Littelfuse Commercial Vehicle Products

SW DIMMER
RoHS : Compliant

300 : $28.49
100 : $29.58
50 : $29.66
25 : $31.38
10 : $33.22
5 : $33.31
1 : $37.33

MS27784-21

Honeywell Sensing and Control

Switch Toggle ON OFF ON SPDT Round Lever IWTS 7.5A 230VAC 250VDC Panel Mount with Threads
RoHS : Compliant

100 : $64.05
75 : $65.17
50 : $65.34
25 : $65.99
10 : $66.65
5 : $67.98
1 : $68.77

MSAA277844

Eaton Cutler-Hammer

Contactor - Three-pole - 50A - 24 to 27 Vdc Coil Voltage - Frame D - 55mm Frame Size - Screw Terminals - DIN Rail / Panel Mount.
RoHS : Compliant

5 : $438.97
3 : $440.07
1 : $444.4

1-1877848-5

TE Connectivity

10 POSITION CABLE COLLET STRAIGHT PLUG ASSEMBLY 0 AND 80 DEGREE KEYING MOQ Reduction
RoHS : Compliant

200 : $14.52
150 : $14.82
100 : $18.72
50 : $30.42

4-1617784-1

TE Connectivity

FCA-210-1025L=M83536/10-025L MOQ Reduction
RoHS : Not Compliant

10 : $219.06
8 : $223.53
5 : $301.17
3 : $407.84

6-1877848-8

TE Connectivity

10 POSITION CABLE COLLET STRAIGHT PLUG ASSEMBLY 0 AND 80 DEGREE KEYING MOQ Reduction
RoHS : Compliant

200 : $14.52
150 : $14.82
100 : $18.72
50 : $30.42

8-1617784-4

TE Connectivity

FCB-205-0113M=M83536/1-013M MOQ Reduction
RoHS : Not Compliant

13 : $219.34
10 : $223.82
7 : $269.26
4 : $382.85

3-1617784-2

TE Connectivity

FCA-210-1016L=M83536/10-016L MOQ Reduction
RoHS : Not Compliant

10 : $223.43
8 : $227.98
5 : $307.19
3 : $415.98

5-1877848-7

TE Connectivity

10 POSITION CABLE COLLET STRAIGHT PLUG ASSEMBLY 0 AND 80 DEGREE KEYING MOQ Reduction
RoHS : Compliant

200 : $14.52
150 : $14.82
100 : $18.72
50 : $30.42

5677844002

TE Connectivity

RNF-3000-3/1-9-SP MOQ Reduction
RoHS : Compliant

6,000 : $1.18
4,500 : $1.2
3,000 : $1.75
1,500 : $3.3

5-1617784-1

TE Connectivity

FCA-210-1033L=M83536/10-033L MOQ Reduction
RoHS : Compliant

10 : $223.43
8 : $227.98
5 : $307.19
3 : $415.98

5-1617784-0

TE Connectivity

FCA-210-1032M=M83536/10-032M MOQ Reduction
RoHS : Compliant

10 : $223.43
8 : $227.98
5 : $307.19
3 : $415.98

277849-000

TE Connectivity

S03-05-R-9035 MOQ Reduction
RoHS : Compliant

5,000 : $3.94
3,750 : $4.02
2,500 : $5.91
1,250 : $11.57

5-1877848-2

TE Connectivity

10 POSITION CABLE COLLET STRAIGHT PLUG ASSEMBLY 0 AND 80 DEGREE KEYING MOQ Reduction
RoHS : Compliant

200 : $14.52
150 : $14.82
100 : $18.72
50 : $30.42

4-1617784-6

TE Connectivity

FCA-210-1030M=M83536/10-030M MOQ Reduction
RoHS : Compliant

10 : $223.43
8 : $227.98
5 : $307.19
3 : $415.98

Pasternack Enterprises US

PE3C7784

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm. SMA Male to SMB Jack Bulkhead Cable Using RG400 Coax., Radio frequency assembly SMA male to SMB jack bulkhead cable using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMB jack bulkhead cable using RG400 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB bulkhead cable connection on the other. Our SMA to SMB cable assemblies have a male gender on end 1 and jack on end 2. PE3C7784 can also be known as a SMA plug to SMB female cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB female cable assembly PE3C7784 is built with RG400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7784 can also be used in the other direction and will be SMB jack bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMB jack bulkhead cable using RG400 coax.

590

PE3778-48

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMA Male to SMA Male Cable 48 Inch Length Using RG188-DS Coax., Radio frequency assembly SMA male to SMA male cable 48 inch length using RG188-DS coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male cable 48 inch length using RG188-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3778-48, can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3778-48 is built with RG188-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 48 inch length using RG188-DS coax.

1 : $61.99
25 : $58.89
50 : $55.79
100 : $53.31

377

PE3C7784-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to SMB Jack Bulkhead Cable 12 Inch Length Using RG400 Coax., Radio frequency assembly SMA male to SMB jack bulkhead cable 12 inch length using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMB jack bulkhead cable 12 inch length using RG400 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB bulkhead cable connection on the other. Our SMA to SMB cable assemblies have a male gender on end 1 and jack on end 2. PE3C7784-12 can also be known as a SMA plug to SMB female cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB female cable assembly PE3C7784-12 is built with RG400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7784-12 can also be used in the other direction and will be SMB jack bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMB jack bulkhead cable 12 inch length using RG400 coax.

1 : $131.99
25 : $125.39
50 : $118.79
100 : $113.51

118

PE3C7784-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMB Jack Bulkhead Cable 24 Inch Length Using RG400 Coax., Radio frequency assembly SMA male to SMB jack bulkhead cable 24 inch length using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMB jack bulkhead cable 24 inch length using RG400 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB bulkhead cable connection on the other. Our SMA to SMB cable assemblies have a male gender on end 1 and jack on end 2. PE3C7784-24 can also be known as a SMA plug to SMB female cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB female cable assembly PE3C7784-24 is built with RG400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7784-24 can also be used in the other direction and will be SMB jack bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMB jack bulkhead cable 24 inch length using RG400 coax.

1 : $149.99
25 : $142.49
50 : $134.99
100 : $128.99

118

PE3C7784-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Male to SMB Jack Bulkhead Cable 36 Inch Length Using RG400 Coax., Radio frequency assembly SMA male to SMB jack bulkhead cable 36 inch length using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMB jack bulkhead cable 36 inch length using RG400 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB bulkhead cable connection on the other. Our SMA to SMB cable assemblies have a male gender on end 1 and jack on end 2. PE3C7784-36 can also be known as a SMA plug to SMB female cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB female cable assembly PE3C7784-36 is built with RG400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7784-36 can also be used in the other direction and will be SMB jack bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMB jack bulkhead cable 36 inch length using RG400 coax.

1 : $165.99
25 : $157.69
50 : $149.39
100 : $142.75

118

PE3C7784-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. SMA Male to SMB Jack Bulkhead Cable 6 Inch Length Using RG400 Coax., Radio frequency assembly SMA male to SMB jack bulkhead cable 6 inch length using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMB jack bulkhead cable 6 inch length using RG400 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB bulkhead cable connection on the other. Our SMA to SMB cable assemblies have a male gender on end 1 and jack on end 2. PE3C7784-6 can also be known as a SMA plug to SMB female cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB female cable assembly PE3C7784-6 is built with RG400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7784-6 can also be used in the other direction and will be SMB jack bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMB jack bulkhead cable 6 inch length using RG400 coax.

1 : $125.99
25 : $119.69
50 : $113.39
100 : $108.35

118

PE3C7784-72

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG400/U, RF Cable Type: RG400, RF Cable Impedance: 50 Ohm, Length, Max: 72 inches. SMA Male to SMB Jack Bulkhead Cable 72 Inch Length Using RG400 Coax., Radio frequency assembly SMA male to SMB jack bulkhead cable 72 inch length using RG400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMB jack bulkhead cable 72 inch length using RG400 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB bulkhead cable connection on the other. Our SMA to SMB cable assemblies have a male gender on end 1 and jack on end 2. PE3C7784-72 can also be known as a SMA plug to SMB female cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB female cable assembly PE3C7784-72 is built with RG400 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA male to SMB jack bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7784-72 can also be used in the other direction and will be SMB jack bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB female bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMB jack bulkhead cable 72 inch length using RG400 coax.

1 : $217.99
25 : $207.09
50 : $196.19
100 : $187.47

118

PE3C9778-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: 10KV, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MHV, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tinned Copper, RF Cable Part Number: RG303HV, RF Cable Type: RG303HV, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 10KV Female Bulkhead to MHV Male Right Angle Cable 48 Inch Length Using RG303HV Coax., Radio frequency assembly 10KV female bulkhead to MHV male right angle cable 48 inch length using RG303HV coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 10KV female bulkhead to MHV male right angle cable 48 inch length using RG303HV coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10KV to MHV cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 10KV bulkhead cable connection on one end and right angle MHV cable connection on the other. Our 10KV to right angle MHV cable assembly has female gender on end 1 and male on end 2. PE3C9778-48 can also be known as a 10KV jack to right angle MHV plug cable assembly and will be shipped same-day as it is purchased. 10KV jack to MHV plug cable assembly PE3C9778-48 is built with RG303HV which is a coax type. The Pasternack 10KV cable assembly is manufactured with 10KV to right angle MHV cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 10KV female bulkhead to MHV right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9778-48 can also be used in the other direction and will be right angle MHV male to 10KV female bulkhead cable assembly if the opposite connectivity is required. 10KV jack bulkhead to MHV right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10KV to MHV cable assembly for quick shipment worldwide. Variations of 10KV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10KV female bulkhead to MHV male right angle cable 48 inch length using RG303HV coax.

1 : $231.99
25 : $220.39
50 : $208.79
100 : $199.51

PE3W16778-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 7/16 DIN Male to 7/16 DIN Male Low Loss Cable 48 Inch Length Using LMR-LW600 Coax., Radio frequency assembly 7/16 DIN male to 7/16 DIN male low loss cable 48 inch length using LMR-LW600 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male to 7/16 DIN male low loss cable 48 inch length using LMR-LW600 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 7/16 DIN cable connection on one end and a 7/16 DIN cable connection on the other. Our low loss 7/16 DIN to 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W16778-48 can also be known as a low loss 7/16 DIN plug to 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16778-48 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our 7/16 DIN male to 7/16 DIN male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3W16778-48 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss 7/16 DIN plug to 7/16 DIN plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems.

1 : $129.99
25 : $123.49
50 : $116.99
100 : $111.79

PE3W17784

Pasternack Enterprises

Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Slide-On BMA Jack 2 Hole Flange to MCX Jack Cable Using LMR-100 Coax. PE3W17784 is a BMA jack 2 hole flange to MCX jack cable using LMR-100A coax. This Pasternack BMA jack 2 hole flange to MCX jack cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm MCX for connector 2. Our jack BMA 2 hole flange to jack MCX cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W17784 BMA jack 2 hole flange to MCX jack cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems.

PE33778-48

Pasternack Enterprises

Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm, Length: 48 inches. HN Male to HN Male Cable 48 Inch Length Using RG225 Coax., Radio frequency assembly HN male to HN male cable 48 inch length using RG225 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. HN male to HN male cable 48 inch length using RG225 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HN to HN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with HN cable connection on one end and HN cable connection on the other. Our HN to HN cable assemblies have a male gender on end 1 and male on end 2. This HN to HN cable is a male to male coax assembly, PE33778-48, can also be known as a HN plug to HN plug cable assembly and will be shipped same-day as it is purchased. HN plug to HN plug cable assembly PE33778-48 is built with RG225 which is a flexible coax type. The Pasternack flexible HN cable assembly is manufactured with HN to HN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 400 MHz maximum frequency HN male to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. HN plug to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HN to HN cable assembly for quick shipment worldwide. Variations of HN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this HN male to HN male cable 48 inch length using RG225 coax.

1 : $235.99
25 : $224.19
50 : $212.39

PE37784

Pasternack Enterprises

PE3W07784

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: C, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm. N Male to C Male Right Angle Cable Using RG214 Coax. PE3W07784 is a N male to C male right angle cable using RG214 coax. This Pasternack N male to C male right angle cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm C for connector 2. N to C right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male N to male C right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07784 N male to C male right angle cable assembly is constructed with RG214 coax.

TE Connectivity

175778-4

TE Connectivity

CT. CRIMP REC HSG 4P Number of Positions: 4 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp Standard Rectangular Connector | 4 Receptacle Housing With | Part Number: 175778-4 | Internal Number: 175778-4 | TE Connectivity
RoHS : Compliant

1,000 : $0.22
500 : $0.22
250 : $0.23
100 : $0.24
50 : $0.24
1 : $0.27

16,598

747784-8

TE Connectivity

JACKSCREW KIT,4-40, BULK Connector Hardware Accessory Type: Male Jackscrew Primary Product Material: Stainless Steel Hardware Accessory Function: Latching, Locking & Retention Male Jackscrew Stainless Steel Latching, Locking & Retention | Connector Hardware | Part Number: 747784-8 | Internal Number: 747784-8 | TE Connectivity
RoHS : Compliant

100 : $5.43
50 : $5.54
10 : $6.3
1 : $7.47

3,809

1971778-4

TE Connectivity

PTL TPA HIGH TEMP 2 x 4 BLACK Connector Hardware Accessory Type: TPA (Terminal Position Assurance) Primary Product Color: Black Primary Product Material: PA 66 Number of Positions: 8 Operating Temperature (Max): 302 °F TPA (Terminal Position Assurance) Black PA 66 8 | Locking Plate & Power Triple Lock & Tpa | Part Number: 1971778-4 | Internal Number: 1971778-4 | TE Connectivity
RoHS : Compliant

1,000 : $0.19
100 : $0.26
10 : $0.32
1 : $0.41

3,062

747784-3

TE Connectivity

AMPLI JACKSCREW 4-40 KIT Connector Hardware Accessory Type: Jackscrew Primary Product Material: Stainless Steel Hardware Accessory Function: Latching, Locking & Retention Jackscrew Stainless Steel Latching, Locking & Retention | Connector Hardware | Part Number: 747784-3 | Internal Number: 747784-3 | Alias Number: AMP-0-0747784-3 | TE Connectivity
RoHS : Compliant

1,000 : $4.12
500 : $4.33
250 : $4.55
100 : $4.77
50 : $5.0
25 : $5.35
10 : $5.6
1 : $6.53

2,339