| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
817-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() TME | MFC2817-R01FT1 | TT Electronics plc | Resistor: thick film; 10mΩ; 2817; -55÷155°C; 30ppm/°C |
| 21,000 | |
| MFC2817-R02FT1 | TT Electronics plc | Resistor: wire-wound; 20mΩ; -55÷155°C; 30ppm/°C |
| 14,578 | ||
1N5817RLG![]() | onsemi | Diode: Schottky rectifying; THT; 20V; 1A; CASE59; Ufmax: 0.875V RoHS : Compliant |
| 4,837 | ||
| R-817 RG58 | Xinya Electronics Co Ltd | Connector: UHF (SO-239); plug; male; coaxial; straight; RG58; PS |
| 1,874 | ||
BC817RAZ![]() | Nexperia | Transistor: NPN x2; bipolar; 45V; 0.5A; DFN1412-6,SOT1268-1 RoHS : Compliant |
| 0 | ||
| GWD4817R | Gewiss SpA | Automatic restart module; Poles: 2; 230VAC; Inom: 25A; IP40 |
| 0 | ||
| WTL-AA1SXF1817RAHSS02 | WTL | Filter: SAW; f: 1817MHz; 3x3mm; -30÷85°C; Band: 25MHz |
| 0 | ||
STM1817RWX7F![]() | STMicroelectronics | IC: supervisor circuit; power on reset monitor (PoR); push-pull RoHS : Compliant |
| 0 | ||
| WTL-AA1SXF1817RANSS02 | WTL | Filter: SAW; f: 1817.5MHz; 3x3mm; -30÷85°C; Band: 25MHz |
| 0 | ||
| WTL-AA1SXF1817RBNSS02 | WTL | Filter: SAW; f: 1817MHz; 3x3mm; -40÷85°C; Band: 25MHz |
| 0 | ||
| XC6221B1817R-G | Torex Semiconductor LTD | IC: voltage regulator; LDO,linear,fixed; 1.8V; 250mA; USPN4; SMD RoHS : Compliant |
| 0 | ||
| XC6501A1817R-G | Torex Semiconductor LTD | IC: voltage regulator; LDO,linear,fixed; 1.8V; 200mA; USPN4; SMD RoHS : Compliant |
| 0 | ||
| XC6501D1817R-G | Torex Semiconductor LTD | IC: voltage regulator; LDO,linear,fixed; 1.8V; 200mA; USPN4; SMD RoHS : Compliant |
| 0 | ||
XC6504A1817R-G![]() | Torex Semiconductor LTD | IC: voltage regulator; LDO,linear,fixed; 1.8V; 150mA; USPN4; SMD RoHS : Compliant |
| 0 | ||
XC6504A2817R-G![]() | Torex Semiconductor LTD | IC: voltage regulator; LDO,linear,fixed; 2.8V; 150mA; USPN4; SMD RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | 1N5817RLG![]() | onsemi | - Tape and Reel (Alt: 1N5817RLG) RoHS : Compliant |
| 10,000 | |
| RCMA0817R80FHS03 | Vishay Intertechnologies | - Bag (Alt: RCMA0817R80FHS03) RoHS : Not Compliant |
| 0 | ||
XC6504A1817R-G![]() | Torex Semiconductor LTD | LDO Voltage Regulator, Fixed, 1.4 V to 6 V, 1 Output, 1.8V, Positive Output, 150mA, 990mV - Tape and Reel (Alt: XC6504A1817R-G) RoHS : Compliant |
| 0 | ||
| RCL121817R8FKEK | Vishay Intertechnologies | Res Thick Film 1218 17.8Ohm 1% 1W ?100ppm/K Molded T/R - Tape and Reel (Alt: RCL121817R8FKEK) RoHS : Compliant |
| 0 | ||
| SGM817-RQN5G/TR | SG Micro Corp | - Tape and Reel (Alt: SGM817-RQN5G/TR) RoHS : Not Compliant |
| 0 | ||
| 1N2817RB | Microchip Technology Inc | Diode Zener Single 19V 5% 50W 2-Pin TO-3 Tray - Bulk (Alt: 1N2817RB) RoHS : Not Compliant |
| 0 | ||
| CRCW121817R4FKTK | Vishay Intertechnologies | - Tape and Reel (Alt: CRCW121817R4FKTK) RoHS : Not Compliant |
| 0 | ||
| H817R8DYA | TE Connectivity | - Boxed Product (Development Kits) (Alt: 1-1879636-3) RoHS : Compliant |
| 0 | ||
| 1SNA176817R1300 | TE Connectivity | CPV3 - Bag (Alt: 1SNA176817R1300) RoHS : Not Compliant |
| 0 | ||
| XC6501A2817R-G | Torex Semiconductor LTD | LDO Voltage Regulator, Fixed, 1.4 V to 6 V, 1 Output, 2.8V, Positive Output, 200mA, 150mV - Tape and Reel (Alt: XC6501A2817R-G) RoHS : Compliant |
| 0 | ||
| RCMA0817R80FHS09 | Vishay Intertechnologies | - Bag (Alt: RCMA0817R80FHS09) RoHS : Not Compliant |
| 0 | ||
| 1SNA235817R0000 | TE Connectivity | Marking Strip Pre-Printed Self Adhesive PVC White - Bag (Alt: 1SNA235817R0000) RoHS : Not Compliant |
| 0 | ||
| H817R8BCA | TE Connectivity | - Boxed Product (Development Kits) (Alt: 2-1879682-5) RoHS : Compliant |
| 0 | ||
| H817R4BCA | TE Connectivity | - Boxed Product (Development Kits) (Alt: 2-1879682-4) RoHS : Compliant |
| 0 | ||
| XC6501C3817R-G | Torex Semiconductor LTD | LDO Voltage Regulator, Fixed, 1.4 V to 6 V, 1 Output, 3.8V, Positive Output, 200mA, 130mV - Tape and Reel (Alt: XC6501C3817R-G) RoHS : Compliant |
| 0 | ||
![]() Mouser Electronics | RY-3WZ-K | FCL Components Limited | Low Signal Relays - PCB SIGNAL RoHS : Compliant |
| 461 | |
| RY-5WF-K | FCL Components Limited | Low Signal Relays - PCB SIGNAL RoHS : Compliant |
| 356 | ||
| RY-9W-K | FCL Components Limited | Low Signal Relays - PCB SIGNAL RoHS : Compliant |
| 350 | ||
| RY-5W-K | FCL Components Limited | Low Signal Relays - PCB SIGNAL RoHS : Compliant |
| 316 | ||
| RY-18W-K | FCL Components Limited | Low Signal Relays - PCB SIGNAL RoHS : Compliant |
| 251 | ||
| RY-9WZ-K | FCL Components Limited | Low Signal Relays - PCB SIGNAL RoHS : Compliant |
| 237 | ||
| RY-12WZ-K | FCL Components Limited | Low Signal Relays - PCB SIGNAL RoHS : Compliant |
| 163 | ||
| RY-24WZ-K | FCL Components Limited | Low Signal Relays - PCB SIGNAL RoHS : Compliant |
| 158 | ||
| RY-4.5W-K | FCL Components Limited | Low Signal Relays - PCB SIGNAL RoHS : Compliant |
| 157 | ||
| RY-6WZ-K | FCL Components Limited | Low Signal Relays - PCB SIGNAL RoHS : Compliant |
| 109 | ||
| RY-24W-K | FCL Components Limited | Low Signal Relays - PCB Mini Signal 24VDC RoHS : Compliant |
| 76 | ||
| RY-12WFZ-K | FCL Components Limited | Low Signal Relays - PCB Mini Signal 12VDC RoHS : Compliant |
| 69 | ||
| RY-12W-K | FCL Components Limited | Low Signal Relays - PCB Mini Signal 12VDC RoHS : Compliant |
| 0 | ||
| RY-6W-K | FCL Components Limited | Low Signal Relays - PCB SIGNAL RoHS : Compliant |
| 0 | ||
| 817R 48X250 | SCS | Anti-Static Control Products Film, Static Shield, 81705 Series 48'' X 250 Lf Roll RoHS : Compliant |
| 0 | ||
![]() Newark | STM1817RWX7F![]() | STMicroelectronics | Voltage Detector, 5.5V, Sot-23-3; |Stmicroelectronics STM1817RWX7F RoHS : Compliant |
| 2,744 | |
XC6504A1817R-G![]() | Torex Semiconductor LTD | Ldo, Fixed, 1.8V, 0.15A, -40 To 85Deg C; |Torex XC6504A1817R-G RoHS : Compliant |
| 2,292 | ||
XC6504A1817R-G![]() | Torex Semiconductor LTD | Ldo, Fixed, 1.8V, 0.15A, -40 To 85Deg C; |Torex XC6504A1817R-G RoHS : Compliant |
| 2,292 | ||
| 1817R 0101000 | Belden Inc | Multipair Cable, Shielded, 8 Pair, 22Awg; |Belden 1817R 0101000 RoHS : Compliant |
| 1,000 | ||
XC6504A2817R-G![]() | Torex Semiconductor LTD | Ldo, Fixed, 2.8V, 0.15A, -40 To 85Deg C; |Torex XC6504A2817R-G RoHS : Compliant |
| 700 | ||
XC6504A2817R-G![]() | Torex Semiconductor LTD | Ldo, Fixed, 2.8V, 0.15A, -40 To 85Deg C; |Torex XC6504A2817R-G RoHS : Compliant |
| 700 | ||
BC817RAPNZ![]() | Nexperia | Transistor Array, Aec-Q101, 45V, Dfn1412; |Nexperia BC817RAPNZ RoHS : Compliant |
| 2 | ||
| 539-817R | Mitutoyo Corporation | At715-1000; |Mitutoyo 539-817R RoHS : Not Compliant |
| 0 | ||
| 1N2817RB | Microchip Technology Inc | Voltage Regulator To-3; |Microchip Technology 1N2817RB RoHS : Compliant |
| 0 | ||
| H817R8DYA | TE Connectivity | H8 17R8 0.5% 15Ppm; |Te Connectivity Holsworthy H817R8DYA RoHS : Not Compliant |
| 0 | ||
| 817R 48X250 | SCS | Static Shielding Film, 48" X 250M; Bag Type:Static Shielding (Metal-In); Width - Imperial:48"; Length - Imperial:250Ft; Length - Metric:76.2M; Film Thickness:71.12Μm; Bag Color:-; Seal Type:-; Product Range:81705 Series Rohs Compliant: Yes RoHS : Compliant |
| 0 | ||
| XM1817RCY BK199 | Alpha Wire | Awis Series Xm /Bulk Ft /Ft |Alpha Wire XM1817RCY BK199 RoHS : Not Compliant |
| 0 | ||
| RCMA0817R80FHS03 | Vishay Intertechnologies | Rcma 08 17U8 1% K3 Ba10 E3 /Bag; |Vishay RCMA0817R80FHS03 RoHS : Not Compliant |
| 0 | ||
| CRCW121817R4FKTK | Vishay Intertechnologies | Crcw1218 17.4 1% 100 Rt9; |Vishay CRCW121817R4FKTK RoHS : Not Compliant |
| 0 | ||
| RCMA0817R80FHS09 | Vishay Intertechnologies | Rcma 08 17U8 1% K3 Ba50 E3 /Bag; |Vishay RCMA0817R80FHS09 RoHS : Not Compliant |
| 0 | ||
![]() Analog Devices Inc | DS1817R-10+T&R | Analog Devices Inc | Active High 3.3V EconoReset RoHS : Compliant |
| 30,948 | |
| DS1817R-20+T&R | Analog Devices Inc | Active High 3.3V EconoReset RoHS : Compliant |
| 24,580 | ||
![]() RS | 1SFN074817R1001 | ABB Low Voltage Products and Systems | TERMINAL LUG KIT SET OF THREE, AWG4-300MCM |
| 3 | |
| OHB45J6E311 (1SCA022817R2130) | ABB Low Voltage Products and Systems | PISTOL HANDLE NEMA 1,3R,12 / IP65 BLACK COLOR HANDLE 1.8 "(45MM) |
| 2 | ||
| 1SNA176817R1300 (017681713) | TE Connectivity | CPV3, ENTRELEC |
| 1 | ||
1N5817RLG![]() | onsemi | ON SEMI 1N5817RLG, SCHOTTKY DIODE, 20V 1A, 2-PIN DO-41 RoHS : Compliant |
| 0 | ||
| 817R 48X50 | SCS | FILM, STATIC SHIELD, 81705 SERIES, 48'' X 50' ROLL |
| 0 | ||
| 817R 36X50 | SCS | FILM, STATIC SHIELD, 81705 SERIES, 36'' X 50' ROLL |
| 0 | ||
| 817R 48X250 | SCS | FILM, STATIC SHIELD, 81705 81705 SERIES, 48'' X 250' ROLL |
| 0 | ||
| 817R 36X250 | SCS | FILM, STATIC SHIELD, 81705 81705 SERIES, 36'' X 250' ROLL |
| 0 | ||
| 817R 60X6000 | SCS | FILM, STATIC SHIELD, 81705 SERIES 60'' X 6000 FT ROLL |
| 0 | ||
| 1817R 0101000 | Belden Inc | MULTICONDUCTOR CABLE, 8PR, 22AWG, 7X30, TC, PO INS, FOIL, BLACK PVC JKT, CMR |
| 0 | ||
| 1SNA235817R0000 | TE Connectivity | RIB1-RD RoHS : Compliant |
| 0 | ||
| NCYB06-27-AC817-R | SMC Corporation of America | ASSY, SLIDE, NCY2 SERIES |
| 0 | ||
| 8.5000.817R.0100 | Fritz Kuebler Gmbh | ENCODER, INCREMENTAL, CLAMP FLANGE, 6MM SHAFT, PUSH-PULL/10-30V, M12, 100 PPR |
| 0 | ||
| 1SNA173817R1000 (017381710) | TE Connectivity | JUMPER BAR 4 HOLES, ENTRELEC |
| 0 | ||
| XT2LU3015AFF000XXX (1SDA074817R1) | ABB Low Voltage Products and Systems | XT2 125A FRAME 3P THERMAL/MAGNETIC FIXED 100K -480V W/O LUGS 15 AMP |
| 0 | ||
![]() Microchip Technology Inc | 1N2817RB | Microchip Technology Inc | Voltage Regulator _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | |
![]() Onlinecomponents.com | 817R-36X250 | SCS | RoHS : Compliant |
| 0 | |
| 817R-60X6000 | SCS | RoHS : Compliant |
| 0 | ||
| 817R-36X600 | SCS | RoHS : Compliant |
| 0 | ||
| 817R-48X250 | SCS | RoHS : Compliant |
| 0 | ||
| 817R60X3000 | SCS | FILM, STATIC SHIELD, 81705 RoHS : Compliant |
| 0 | ||
| 817R-48X50 | SCS | RoHS : Compliant |
| 0 | ||
| 817R36X600 | SCS | FILM, STATIC SHIELD, 81705 RoHS : Compliant |
| 0 | ||
| 817R60X6000 | SCS | FILM, STATIC SHIELD, 81705 RoHS : Compliant |
| 0 | ||
| 817R-36X50 | SCS | RoHS : Compliant |
| 0 | ||
| 817R-60X3000 | SCS | RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | BC817RAZ![]() | Nexperia | Trans BJTs Array 45V 500mA 6-SON T/R RoHS : Compliant |
| 147,000 | |
ADM1817-R23AKSZ-R7![]() | Analog Devices Inc | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.31V, PDSO3 RoHS : Compliant |
| 26,960 | ||
ADM1817-R22ART-RL7![]() | Analog Devices Inc | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.18V, CMOS, PDSO3 RoHS : Not Compliant |
| 3,000 | ||
ADM1817-R23AKS-RL![]() | Analog Devices Inc | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.31V, PDSO3 RoHS : Not Compliant |
| 20,000 | ||
ADM1817-R22ART-RL![]() | Analog Devices Inc | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.18V, PDSO3 RoHS : Not Compliant |
| 20,000 | ||
ADM1817-R23ART-RL![]() | Analog Devices Inc | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.31V, PDSO3 RoHS : Not Compliant |
| 10,000 | ||
DS1817R-10-U![]() | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.88V, CMOS, PDSO3 RoHS : Not Compliant |
| 4,513 | ||
DS1817R-10-U+![]() | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.88V, CMOS, PDSO3 RoHS : Compliant |
| 403 | ||
DS1817R-20+T&R![]() | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.55V, CMOS, PDSO3 RoHS : Compliant |
| 2,606 | ||
DS1817R-20-U![]() | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.55V, CMOS, PDSO3 RoHS : Not Compliant |
| 1,403 | ||
DS1817R-20-U+![]() | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.55V, CMOS, PDSO3 RoHS : Compliant |
| 1,795 | ||
DS1817R-20/T&R![]() | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +2.55V, CMOS, PDSO3 RoHS : Not Compliant |
| 63,000 | ||
DS1817R-5-U![]() | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +3.06V, CMOS, PDSO3 RoHS : Not Compliant |
| 2,545 | ||
DS1817R-5-U+![]() | Maxim Integrated Products | Voltage Supervisor/Reset IC, Fixed, 1 Channel, +3.06V, CMOS, PDSO3 RoHS : Compliant |
| 2,995 | ||
| RAA229817R20GNP#HA0 | Renesas Electronics Corporation | RAA229817 - 16-Phase PWM Controller RoHS : Compliant |
| 8,000 | ||
![]() Sager | 1SNA176817R1300 | TE Connectivity | DIN Rail Terminal Blocks RoHS : Compliant |
| 0 | |
| 1SNA235817R0000 | TE Connectivity | DIN Rail Terminal Blocks TAP1527 RoHS : Compliant |
| 0 | ||
| LEL12-1REC5-40608-17R5-G1-V | Sensata Circuit Breakers | Circuit Breakers Cir Brkr Hyd Mag |
| 0 | ||
| 1SNA400817R0000 | TE Connectivity | TE Connectivity MA2.5/5-2CPE RoHS : Compliant |
| 0 | ||
| 1SNA173817R1000 | TE Connectivity | DIN Rail Terminal Blocks RoHS : Compliant | 0 | |||
![]() ComSIT USA | DS1817R5+ | Maxim Integrated Products | Supervisory Circuit 3.06V SOT-23-3 T/R RoHS : Compliant | 6,650 | ||
| PC817RP1J00F | Sharp Microelectronics of the Americas | HIGH DENSITY MOUNTING TYPE PHOTOCOUPLER Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Compliant | 3,395 | |||
![]() Interstate Connecting Components | 418356817R | Amphenol PCD | RHINO | 0 | ||
| 1SNA176817R1300 | TE Connectivity | CPV3 RoHS : Compliant | 0 | |||
| 2CMA167817R1000 | Amphenol Sine Systems | 416MHS4W INDUSTRIAL SWITCHED I | 0 | |||
| 1SNA400817R0000 | TE Connectivity | MA2.5/5-2CPE RoHS : Compliant | 0 | |||
![]() PEI Genesis | 11457817 REV B | ITT Interconnect Solutions |
| 0 | ||
| S2362-2817R-34 | SOURIAU-SUNBANK |
| 0 | |||
![]() Chip 1 Exchange | 1N5817RL | Motorola Semiconductor Products | INSTOCK RoHS : Not Compliant | 13,000 | ||
| CXD2817R-T4 | INSTOCK | 1,460 | ||||
![]() Avnet Abacus | H817R8DYA | TE Connectivity | Resistor 178 Ohm 05 250 mW Axial Leaded Metal Film Precision (Alt: 1-1879636-3) RoHS : Compliant | 0 | ||
| H817R8BCA | TE Connectivity | Resistor 178 Ohm 01 250 mW Axial Leaded Metal Film Precision (Alt: 2-1879682-5) RoHS : Compliant | 0 | |||
| H817R4BCA | TE Connectivity | Resistor 174 Ohm 01 250 mW Axial Leaded Metal Film Precision (Alt: 2-1879682-4) RoHS : Compliant | 0 | |||
| H817R8BZA | TE Connectivity | Resistor 178 Ohm 01 250 mW Axial Leaded Metal Film Precision (Alt: 2-1879692-5) RoHS : Compliant | 0 | |||
| H817R8DCA | TE Connectivity | Resistor 178 Ohm 05 250 mW Axial Leaded Metal Film Precision (Alt: 1-1879645-3) RoHS : Compliant | 0 | |||
| H817R8BYA | TE Connectivity | Resistor 178 Ohm 01 250 mW Axial Leaded Metal Film Precision (Alt: 2-1879662-5) RoHS : Compliant | 0 | |||
| H817R8BDA | TE Connectivity | Resistor 178 Ohm 01 250 mW Axial Leaded Metal Film Precision (Alt: 2-1879672-5) RoHS : Compliant | 0 | |||
| H817R4BYA | TE Connectivity | Resistor 174 Ohm 01 250 mW Axial Leaded Metal Film Precision (Alt: 2-1879662-4) RoHS : Compliant | 0 | |||
| H817R4BDA | TE Connectivity | Resistor 174 Ohm 01 250 mW Axial Leaded Metal Film Precision (Alt: 2-1879672-4) RoHS : Compliant | 0 | |||
| H817R4BZA | TE Connectivity | Resistor 174 Ohm 01 250 mW Axial Leaded Metal Film Precision (Alt: 2-1879692-4) RoHS : Compliant | 0 | |||
| H817R8DZA | TE Connectivity | Resistor 178 Ohm 05 250 mW Axial Leaded Metal Film Precision (Alt: 1-1879654-3) RoHS : Compliant | 0 | |||
| 1SNA176817R1300 | TE Connectivity | CPV3 (Alt: 1SNA176817R1300) RoHS : Compliant | 0 | |||
| 1SNA235817R0000 | TE Connectivity | Marking Strip PrePrinted Self Adhesive PVC White (Alt: 1SNA235817R0000) RoHS : Compliant | 0 | |||
| 1SNA400817R0000 | TE Connectivity | MA2552CPE (Alt: 1SNA400817R0000) RoHS : Compliant | 0 | |||
![]() Avnet Asia | BC817RAZ![]() | Nexperia | (Alt: BC817RAZ) RoHS : Compliant | 0 | ||
1N5817RLG![]() | onsemi | (Alt: 1N5817RLG) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | STM1817RWX7F![]() | STMicroelectronics | Voltage Detector ActiveHigh PushPull 1V to 55V Supply 255 V Threshold 150 ms SOT233 (Alt: STM1817RWX7F) RoHS : Compliant | 12,000 | ||
BC817RAZ![]() | Nexperia | Transistor GP BJT NPN 45V 500mA 3Pin SOT23 TR (Alt: BC817RAZ) RoHS : Compliant | 0 | |||
1N5817RLG![]() | onsemi | 10 A 20 V Schottky Rectifier (Alt: 1N5817RLG) RoHS : Compliant | 0 | |||
BC817RAPNZ![]() | Nexperia | (Alt: BC817RAPNZ) RoHS : Compliant | 0 | |||
XC6504A1817R-G![]() | Torex Semiconductor LTD | (Alt: XC6504A1817R-G) RoHS : Compliant | 0 | |||
| XC6221B1817R-G | Torex Semiconductor LTD | (Alt: XC6221B1817R-G) RoHS : Compliant | 0 | |||
| XC6221A1817R-G | Torex Semiconductor LTD | LDO Regulator with CE (Alt: XC6221A1817R-G) RoHS : Compliant | 0 | |||
XC6504A2817R-G![]() | Torex Semiconductor LTD | (Alt: XC6504A2817R-G) RoHS : Compliant | 0 | |||
| XC6501D1817R-G | Torex Semiconductor LTD | (Alt: XC6501D1817R-G) RoHS : Compliant | 0 | |||
| XC6221D1817R-G | Torex Semiconductor LTD | (Alt: XC6221D1817R-G) RoHS : Compliant | 0 | |||
| XC6501A1817R-G | Torex Semiconductor LTD | (Alt: XC6501A1817R-G) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | DS1817R-10+T/R | Maxim Integrated Products | IN STOCK SHIP TODAY |
| 1,200 | |
![]() EBV Elektronik | 1N5817RLG![]() | onsemi | 10 A 20 V Schottky Rectifier (Alt: 1N5817RLG) RoHS : Compliant | 0 | ||
STM1817RWX7F![]() | STMicroelectronics | Voltage Detector ActiveHigh PushPull 1V to 55V Supply 255 V Threshold 150 ms SOT233 (Alt: STM1817RWX7F) RoHS : Compliant | 0 | |||
![]() Master Electronics | LEL121REC54060817R5G1V | Sensata Circuit Breakers | CIR BRKR HYD MAG RoHS : Compliant |
| 0 | |
| MFC2817-R039FT1 | TT Electronics Welwyn Components | RoHS : Compliant |
| 0 | ||
| 1N2817RB | Microchip Technology Inc | Voltage Regulator RoHS : Compliant |
| 0 | ||
| H817R8DYA | TE Connectivity | H8 17R8 0.5% 15PPM Thin Film Leaded Precision resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
| 1SNA176817R1300 | TE Connectivity | ABB-CONNECTION - SNA SERIES ACCESSORIES MOQ Reduction RoHS : Compliant |
| 0 | ||
| 1SNA235817R0000 | TE Connectivity | TAP1527 RoHS : Compliant |
| 0 | ||
| H817R8BCA | TE Connectivity | H8 17R8 0.1% 50PPM Thin Film Leaded Precision resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
| MFC2817-R02FT1 | TT Electronics Welwyn Components | Metal Foil Resistors - SMD 3W 0.02 ohm +/-1% Ceramic Resistor RoHS : Compliant |
| 0 | ||
| H817R4BCA | TE Connectivity | H8 17R4 0.1% 50PPM Thin Film Leaded Precision resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
| H817R8BZA | TE Connectivity | H8 17R8 0.1% 100PPM Thin Film Leaded Precision resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
| H817R8DCA | TE Connectivity | H8 17R8 0.5% 50PPM Thin Film Leaded Precision resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
| H817R8BYA | TE Connectivity | H8 17R8 0.1% 15PPM Thin Film Leaded Precision resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
| H817R8BDA | TE Connectivity | H8 17R8 0.1% 25PPM Thin Film Leaded Precision resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
| H817R4BYA | TE Connectivity | H8 17R4 0.1% 15PPM Thin Film Leaded Precision resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
| H817R4BDA | TE Connectivity | H8 17R4 0.1% 25PPM Thin Film Leaded Precision resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C8817/RD-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8817/RD-72, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8817/RD-72 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8817/RD-72 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-RD coax. |
| 0 | |
| PE3C8817/RD-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8817/RD-12, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8817/RD-12 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8817/RD-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1694A-RD coax. |
| 0 | ||
| PE3C8817/RD-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8817/RD-36, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8817/RD-36 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8817/RD-36 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1694A-RD coax. |
| 0 | ||
| PE3C8817/RD | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8817/RD, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8817/RD is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8817/RD can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1694A-RD coax. | 0 | |||
| PE3C8817/RD-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8817/RD-300, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8817/RD-300 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8817/RD-300 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1694A-RD coax. |
| 0 | ||
| PE3C8817/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8817/RD-120, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8817/RD-120 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8817/RD-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax. |
| 0 | ||
![]() Vyrian | DS1817R-10/T&R/C01 | Analog Devices Inc | Power Supply Support Circuit | 12,049 | ||
ADM1817-R22AKS-REEL7![]() | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.18V, PDSO3 RoHS : Not Compliant | 11,874 | |||
| DS1817R-10+T&R | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.88V, CMOS, PDSO3 RoHS : Compliant | 11,520 | |||
ADM1817-R22AKSZ-R7![]() | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.18VV, PDSO3 RoHS : Compliant | 11,469 | |||
ADM1817-R23AKS-RL7![]() | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.31VV, PDSO3 RoHS : Not Compliant | 10,636 | |||
ADM1817-R23ARTZ-RL![]() | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.31V, PDSO3 RoHS : Compliant | 10,235 | |||
ADM1817-R22ARTZ-RL7![]() | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.18V, PDSO3 RoHS : Compliant | 9,129 | |||
| DS1817R-10-T-R | Analog Devices (Maxim Integrated) | 8,981 | ||||
STM1817RWX7F![]() | STMicroelectronics | RoHS : Compliant | 8,300 | |||
| DS1817R-10+TR | Analog Devices (Maxim Integrated) | 7,413 | ||||
ADM1817-R23AKSZ-RL![]() | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.31V, PDSO3 RoHS : Compliant | 6,955 | |||
ADM1817-R22ART-REEL7![]() | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.18V, PDSO3 RoHS : Not Compliant | 5,740 | |||
ADM1817-R22ART-RL7![]() | Analog Devices Inc | Power Supply Support Circuit, Fixed, 1 Channel, +2.18VV, CMOS, PDSO3 RoHS : Not Compliant | 5,463 | |||
| DS1817R-20-T-R | Analog Devices (Maxim Integrated) | 5,193 | ||||
| PADS9817RSHT | Texas Instruments | ADC, Successive Approximation, 18-Bit, 1 Func, 8 Channel, Serial Access, PQCC56 RoHS : Not Compliant | 4,759 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |