879G-SM1-R Price, Reseller, Stock

1 : $228.867
5 : $228.867
10 : $198.058
25 : $168.836
50 : $168.836
100 : $163.476
250 : $158.446
500 : $153.716
1,000 : $149.261
2,500 : $147.129
10,000 : $147.129

85996687911

SOURIAU-SUNBANK

Connector 38999

1 : $74.36
5 : $69.319
10 : $61.967
25 : $61.042
50 : $61.042
100 : $60.144
250 : $58.426
500 : $56.803
1,000 : $56.025
2,500 : $56.025
10,000 : $56.025

87943-01

Honeywell Sensing and Control

Switches

1 : $304.133
5 : $304.133
10 : $263.192
25 : $224.361
50 : $224.361
100 : $217.238
250 : $210.554
500 : $204.269
1,000 : $198.348
2,500 : $195.514
10,000 : $195.514

87961-7

TE Connectivity

Connector
RoHS : Compliant

1 : $110.982
5 : $103.458
10 : $92.485
25 : $91.104
50 : $91.104
100 : $89.765
250 : $87.2
500 : $84.778
1,000 : $83.616
2,500 : $83.616
10,000 : $83.616

8879K4

Safran Electrical & Power UK

Switches

879-7-15 MA9

Winchester Interconnect

Connector

1 : $247.891
5 : $231.085
10 : $206.576
25 : $203.493
50 : $203.493
100 : $200.5
250 : $194.771
500 : $189.361
1,000 : $186.767
2,500 : $186.767
10,000 : $186.767

Maritex

TR18794G-2

ZUCH

Flat connector; male; 4.8mm; 0.8mm; brass; unisolated

10,000 : $0.026
1,000 : $0.031
100 : $0.036
1 : $0.038

7,963

TLE9879QXW40

Infineon Technologies AG

Microcontrollers (MCU); TLE9879QXW40; INFINEON TECHNOLOGIES; 6 kB; FLASH; 10; 40 MHz
RoHS : Compliant

1,000 : $5.704
500 : $6.256
100 : $7.026
30 : $7.458
10 : $9.785
1 : $11.256

2,166

1761987-9

TE Connectivity

Plug-in Connectors; 1761987-9; TE CONNECTIVITY; Yes; Straight; 26; Receptacle
RoHS : Compliant

800 : $2.545
400 : $2.693
100 : $3.018
30 : $3.563
10 : $4.123
1 : $5.2124

1,810

102387-9

TE Connectivity

Rectangular Connector Housings; 102387-9; TE CONNECTIVITY; 2; 40; 40; Yes
RoHS : Compliant

100 : $3.563
10 : $4.903
1 : $6.9695

1,698

KSZ8795CLXIC

Microchip Technology Inc

Ethernet PHY ICs; KSZ8795CLXIC; MICROCHIP TECHNOLOGY; 1 Gbps; 80
RoHS : Compliant

100 : $6.826
30 : $7.854
10 : $9.877
1 : $13.0

822

1587985-1

TE Connectivity

Rectangular Connector Housings; 1587985-1; TE CONNECTIVITY; 1; 2; Black
RoHS : Compliant

500 : $0.99
100 : $1.136
50 : $1.256
10 : $1.581
1 : $2.0947

500

MC33879BPEKR2

NXP Semiconductors

Power Management ICs (PMICs); MC33879BPEKR2; NXP SEMICONDUCTORS
RoHS : Compliant

500 : $5.412
250 : $5.721
100 : $6.095
25 : $7.064
10 : $7.737
1 : $10.353

323

5787962-2

TE Connectivity

D-Sub Connectors; 5787962-2; TE CONNECTIVITY; 42.7 mm; Yes; Surface Mount
RoHS : Compliant

100 : $56.134
30 : $62.257
10 : $68.04
1 : $79.1222

109

CA12879_MIRA-W

LEDIL

LEDIL MIRA-MKR-W-12879 Lens, Wide, 42°, for Cree™ XLamp® MHD-E/G/MK-R/XHP70, white holder with adhesive tape, RoHS

120 : $1.911
60 : $2.102
10 : $2.233
1 : $2.33

5788792-1

TE Connectivity

D-Sub Connectors; 5788792-1; TE CONNECTIVITY; D-Sub; Yes; Right Angle; 30.81 mm
RoHS : Compliant

30 : $2.9
10 : $3.616
1 : $4.6676

Pasternack Enterprises US

PE3C1879-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Male Right Angle Low Loss Cable 24 Inch Length Using LMR-240-UF Coax., Radio frequency assembly N male to N male right angle low loss cable 24 inch length using LMR-240-UF coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 24 inch length using LMR-240-UF coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our low loss N type to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3C1879-24 can also be known as a low loss type N plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C1879-24 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1879-24 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to N type right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 24 inch length using LMR-240-UF coax.

1 : $154.99
25 : $147.24
50 : $139.49
100 : $133.29

1,554

PE45879

Pasternack Enterprises

Key Specifications, Connector Series: BNC, Connector Gender: Plug, Impedance: 50 Ohm, Body Style: Straight, Attachment Method: Crimp/Solder, Mount Method: None, Minimum Frequency: DC, Maximum Frequency: 4 GHz, Interface Type 1: RG58, Interface Type 2: RG141. BNC Plug Non-Magnetic Connector Crimp/Solder Attachment for RG58, RG141. PE45879 BNC plug coaxial connector has an interface type of BNC plug RG58 and RG141 and a 50 Ohm impedance. This connector is part of our non-magnetic RF interconnects that are designed for carrying RF signals within a magnetic field. As such, they have a low level of magnetic susceptibility and no field distortion. Pasternack's BNC plug connector uses crimp/solder as an attachment method. Our plug BNC coaxial connector provides a maximum frequency of 4 GHz. This BNC coaxial connector is stocked to be readily available for same business day shipment. The Pasternack BNC plug coaxial connector has a maximum VSWR of 1.3:1. This non-magnetic connector is suitable for use in MRI and other medical imaging equipment, patient monitoring devices, medical technology, and other non-magnetic RF applications. Pasternack's BNC coaxial connector has a bronze body with copper-tin-zinc alloy plating. Our PE45879 BNC connector uses gold over copper-plated bronze contact. Additional RF connector specs and dimensions for this component can be found on its PDF specification datasheet and CAD drawings above. The radio frequency connector is made from bronze material and has a contact life of 500 cycles or more. The PE45879 BNC non-magnetic connector operates at a temperature range of -55 to 120 deg C. This threaded plug coaxial RF connector has a maximum insertion loss of 0.2 dB. The Pasternack non-magnetic BNC plug connector has a maximum operating voltage of 500 Vrms and a dielectric withstanding voltage of 1,500 Vrms. This Pasternack non-magnetic plug BNC connector will ship the same business day as purchased. Our BNC plug connector is part of RF, microwave and millimeter wave components in stock for worldwide shipment. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF connector as per your requirements.

1 : $314.99
25 : $302.39
50 : $292.94
100 : $286.64

PE3C2879/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. QMA Male to QMA Male Right Angle Cable Using RG142 Coax with HeatShrink. PE3C2879/HS is a QMA male to QMA male right angle cable using RG142 coax. This Pasternack QMA male to QMA male right angle cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm QMA for connector 2. QMA to QMA right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male QMA to male QMA right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2879/HS QMA male to QMA male right angle cable assembly is constructed with RG142 coax.

PE3C6879LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. N Male to TNC Male Cable Using LMR-200 Coax with HeatShrink, LF Solder. PE3C6879LF/HS is a N male to TNC male cable using LMR-200 coax. This Pasternack N male to TNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm TNC for connector 2. Our male N to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C6879LF/HS N male to TNC male cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W19879/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Bulkhead Cable Using LMR-240 Coax with HeatShrink. PE3W19879/HS is a SMA male to SMA female bulkhead cable using LMR-240 coax. This Pasternack SMA male to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19879/HS SMA male to SMA female bulkhead cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W19879LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to SMA Male Cable Using LMR-240 Coax with HeatShrink, LF Solder. PE3W19879LF/HS is a SMA female bulkhead to SMA male cable using LMR-240 coax. This Pasternack SMA female bulkhead to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our female SMA bulkhead to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19879LF/HS SMA female bulkhead to SMA male cable assembly is constructed with LMR-240 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3W20879/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Female to Reverse Polarity SMA Female Cable Using PE-C240 Coax with HeatShrink. PE3W20879/HS is a reverse polarity SMA female to reverse polarity SMA female cable using PE-C240 coax. This Pasternack reverse polarity SMA female to reverse polarity SMA female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse polarity female SMA to reverse polarity female SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W20879/HS SMA reverse polarity female to SMA reverse polarity female cable assembly is constructed with PE-C240 coax.

PE34879-48

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 48 inches. MMCX Plug to MMCX Plug Cable 48 Inch Length Using RG174 Coax., Radio frequency assembly MMCX plug to MMCX plug cable 48 inch length using RG174 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MMCX plug to MMCX plug cable 48 inch length using RG174 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMCX cable connection on one end and MMCX cable connection on the other. Our MMCX to MMCX cable assemblies have a plug gender on end 1 and plug on end 2. This MMCX to MMCX cable is a plug to plug coax assembly, PE34879-48, can also be known as a MMCX male to MMCX male cable assembly and will be shipped same-day as it is purchased. MMCX male to MMCX male cable assembly PE34879-48 is built with RG174 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MMCX plug to MMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MMCX male to MMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to MMCX cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug to MMCX plug cable 48 inch length using RG174 coax.

1 : $68.49
25 : $65.07
50 : $61.64
100 : $58.9

PE34879LF-48

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 48 inches. MMCX Plug to MMCX Plug Cable 48 Inch Length Using RG174 Coax, RoHS., Radio frequency assembly MMCX plug to MMCX plug cable 48 inch length using RG174 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. MMCX plug to MMCX plug cable 48 inch length using RG174 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with MMCX cable connection on one end and MMCX cable connection on the other. Our MMCX to MMCX cable assemblies have a plug gender on end 1 and plug on end 2. This MMCX to MMCX cable is a plug to plug coax assembly, PE34879LF-48, can also be known as a MMCX male to MMCX male cable assembly and will be shipped same-day as it is purchased. MMCX male to MMCX male cable assembly PE34879LF-48 is built with RG174 which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with MMCX to MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency MMCX plug to MMCX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MMCX male to MMCX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to MMCX cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug to MMCX plug cable 48 inch length using RG174 coax, RoHS.

1 : $92.09
25 : $87.49
50 : $82.88
100 : $79.2

PE35879/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: MCX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. TNC Female Bulkhead to MCX Plug Right Angle Cable Using RG316-DS Coax with HeatShrink. PE35879/HS is a TNC female bulkhead to MCX plug right angle cable using RG316-DS coax. This Pasternack TNC female bulkhead to MCX plug right angle cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm MCX for connector 2. TNC to MCX right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our female TNC bulkhead to plug MCX right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE35879/HS TNC female bulkhead to MCX plug right angle cable assembly is constructed with RG316-DS coax.

PE38797

Pasternack Enterprises

PE3W21879

Pasternack Enterprises

Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P086HF, RF Cable Type: PE-P086HF, RF Cable Impedance: 50 Ohm. Mini SMP Male to SMA Female Bulkhead Cable Using PE-P086HF Coax. PE3W21879 is a Mini SMP male to SMA female bulkhead cable using PE-P086HF coax. This Pasternack Mini SMP male to SMA female bulkhead cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMA for connector 2. Our male Mini SMP to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W21879 Mini SMP male to SMA female bulkhead cable assembly is constructed with PE-P086HF coax.

PE3C5879-48

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.1/9.5 Mini DIN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 48 inches. Plenum 4.1/9.5 Mini DIN Male to SMA Female Low PIM Cable 48 Inch Length Using SPP-250-LLPL Coax, LF Solder., Radio frequency assembly plenum 4.1/9.5 mini DIN male to SMA female low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.1/9.5 mini DIN male to SMA female low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.1/9.5 mini DIN to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.1/9.5 mini DIN cable connection on one end and SMA cable connection on the other. Our low PIM 4.1/9.5 mini DIN to SMA cable assemblies have a male gender on end 1 and female on end 2. This 4.1/9.5 mini DIN to SMA cable is a male to female coax assembly, PE3C5879-48, can also be known as a low PIM 4.1/9.5 mini DIN plug to SMA jack cable assembly and will be shipped same-day as it is purchased. 4.1/9.5 mini DIN plug to SMA jack cable assembly PE3C5879-48 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 4.1/9.5 Mini DIN cable assembly is manufactured with 4.1/9.5 mini DIN to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.1/9.5 mini DIN male to SMA female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5879-48 can also be used in the other direction and will be SMA female to 4.1/9.5 mini DIN male cable assembly if the opposite connectivity is required. Low PIM 4.1/9.5 mini DIN plug to SMA jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.1/9.5 mini DIN to SMA cable assembly for quick shipment worldwide. Variations of 4.1/9.5 mini DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.1/9.5 mini DIN male to SMA female low PIM cable 48 inch length using SPP-250-LLPL coax, LF solder.

1 : $175.99
25 : $167.19
50 : $158.39
100 : $151.35

PE3C6879-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Male to TNC Male Low Loss Cable 36 Inch Length Using LMR-200 Coax with Times Microwave Components., Radio frequency assembly N male to TNC male low loss cable 36 inch length using LMR-200 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 36 inch length using LMR-200 coax with Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C6879-36 can also be known as a low loss N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C6879-36 is built with LMR-200 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6879-36 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 36 inch length using LMR-200 coax with Times Microwave components.

1 : $101.99
25 : $96.89
50 : $91.79
100 : $87.71

PE3W18797

Pasternack Enterprises

Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. 2.4mm Female to SMA Male Cable Using PE-SR405FL Coax. PE3W18797 is a 2.4mm female to SMA male cable using PE-SR405FL coax. This Pasternack 2.4mm female to SMA male cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm SMA for connector 2. Our female 2.4mm to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W18797 2.4mm female to SMA male cable assembly is constructed with PE-SR405FL coax.

TE Connectivity

2-487937-0

TE Connectivity

020 HOUSING FFC 50CL DR LATCH FFC Connector Product Type: Housing Connector System: Wire-to-Board Number of Positions: 20 Centerline (Pitch): .05 in Centerline (Pitch): 1.27 mm Housing Wire-to-Board 20 .05" | Ampseal Header | .05" | TE Connectivity
RoHS : Compliant

1,000 : $2.22
50 : $2.77
10 : $3.0
1 : $3.32

20,416

141879-1

TE Connectivity

250 FASTON,TAB,BR PCB Terminal Type: Tab Mating Tab Width: .25 in Mating Tab Width: 6.35 mm PCB Hole Diameter: 4.1 mm PCB Hole Diameter: .16 – 16 in Tab .25" 6.35 mm 4.1 mm | .25" | TE Connectivity
RoHS : Compliant

1,000 : $0.21
100 : $0.27
25 : $0.41
10 : $0.46
1 : $0.52

18,447

2-487937-4

TE Connectivity

024 HOUSING FFC 50CL DR LATCH FFC Connector Product Type: Housing Connector System: Wire-to-Board Number of Positions: 24 Centerline (Pitch): .05 in Centerline (Pitch): 1.27 mm Housing Wire-to-Board 24 .05" | Ampseal Header | .05" | TE Connectivity
RoHS : Compliant

1,000 : $2.57
500 : $2.64
250 : $2.72
100 : $2.81
50 : $2.89
1 : $3.17

7,899

1718879-2

TE Connectivity

RETAINER, 5-6POS. HSG. Number of Positions: 6 Primary Product Color: Natural Connector & Contact Retention Accessory Type: Retainer Primary Product Material: PBT GF10 Operating Temperature Range: -40 – 105 °C 6 Natural | PBT GF10 | TE Connectivity
RoHS : Compliant

10,000 : $0.37
5,000 : $0.46
2,500 : $0.61
1,000 : $0.81
500 : $1.22
100 : $1.46

3,945

2108792-2

TE Connectivity

FPC Ant, MHF, 50mm, Wi-Fi 7 Antenna Type: Flexible PCB (FPC) Band Type: Triple Band Primary Application: Wi-Fi Communication Protocol: Bluetooth Wi-Fi Zigbee Mounting Location: Internal/Embedded Flexible PCB (FPC) Triple Band Wi-Fi Bluetooth | TE Connectivity
RoHS : Compliant

1,000 : $1.19
500 : $1.22
250 : $1.26
100 : $1.3
50 : $1.34
1 : $1.47

2,798

2108792-3

TE Connectivity

FPC Ant, MHF, 100mm, Wi-Fi 7 Antenna Type: Flexible PCB (FPC) Band Type: Triple Band Primary Application: Wi-Fi Communication Protocol: Wi-Fi Zigbee Bluetooth Mounting Location: Internal/Embedded Flexible PCB (FPC) Triple Band Wi-Fi | TE Connectivity
RoHS : Compliant

500 : $0.79
250 : $0.82
50 : $0.96
10 : $0.98
1 : $1.18

2,665

1-2287960-5

TE Connectivity

4POS, MCON 1.2 LL REC SEALED 2ROW Nominal Voltage Architecture: 48 V 24 V 12 V Number of Positions: 4 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Tab Width: 1.2 mm Ampseal Header | 48 V | 1.2 mm | TE Connectivity
RoHS : Compliant

20,000 : $1.7
10,000 : $2.12
5,000 : $2.83
2,000 : $3.77
1,000 : $5.66
100 : $6.79

977

163087-9

TE Connectivity

062 SOC.ASS. TYP3+ Contact Mating Area Plating Material: Tin (Sn) Contact Type: Socket Wire Contact Termination Area Plating Material: Tin Wire Size: 24 – 20 AWG Wire Size: .2 – .5 mm² Tin (Sn) Socket 24 – 20 AWG | TE Connectivity
RoHS : Compliant

10,000 : $1.4
5,000 : $1.43
2,500 : $1.46
1,000 : $1.5
500 : $1.53
250 : $1.56
100 : $1.59
50 : $1.62
25 : $1.65
10 : $1.68
1 : $1.71

957

1-87977-0

TE Connectivity

24 MODIV HSG DR MRKD .100 POL Number of Positions: 24 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Mating Retention Type: Detent Latching 24 Receptacle Housing With | TE Connectivity
RoHS : Compliant

5,000 : $2.97
2,500 : $3.04
1,000 : $3.11
500 : $3.19
250 : $3.26
100 : $3.33
50 : $3.4
25 : $3.48
10 : $3.55
1 : $3.62

547

185879-2

TE Connectivity

26W MQS COVER ASSY BLUE Number of Positions: 26 Primary Product Color: Blue Protection & Strain Relief Accessory Type: Cover Assembly Primary Product Material: PBT GF20 Cable Exit Angle: 90 ° 26 Blue Cover Assembly PBT GF20 | TE Connectivity
RoHS : Compliant

1,000 : $0.51
500 : $0.64
250 : $0.97
100 : $1.28
50 : $1.53

522

102387-9

TE Connectivity

40 MODIV HSG COMP DR .100 POL Number of Positions: 40 Connector & Housing Type: Receptacle Connector Product Type: Housing Mating Retention: With Termination Method to Wire & Cable: Crimp 40 Receptacle Housing With | TE Connectivity
RoHS : Compliant

1,000 : $6.64
500 : $6.84
250 : $7.04
100 : $7.25
50 : $7.45
25 : $7.65
10 : $7.85
1 : $8.05

318

174879-2

TE Connectivity

1 POS HSG MARK II+ Nominal Voltage Architecture: 12 V Number of Positions: 1 Connector & Housing Type: Housing for Male Terminals Connector System: Wire-to-Wire Mating Tab Width: 1.8 mm Ampseal Header | 12 V Housing for Male Terminals Wire-to-Wire | 1.8 mm | TE Connectivity
RoHS : Compliant

10,000 : $0.24
5,000 : $0.3
2,500 : $0.41
1,000 : $0.54
500 : $0.81
100 : $0.98

175

1-968879-1

TE Connectivity

MT2/JPT70P BUGH KPL Nominal Voltage Architecture: 12 V Number of Positions: 70 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Board Mating Tab Width: 2.8 mm 1.6 mm Ampseal Header | 12 V 70 Housing for Female Terminals Wire-to-Board | 2.8 mm | TE Connectivity
RoHS : Compliant

100 : $8.28
50 : $10.35
25 : $12.42
10 : $16.56
1 : $24.83

1-487937-0

TE Connectivity

010 HOUSING FFC 50CL DR LATCH FFC Connector Product Type: Housing Connector System: Wire-to-Board Number of Positions: 10 Centerline (Pitch): .05 in Centerline (Pitch): 1.27 mm Housing Wire-to-Board 10 .05" | Ampseal Header | .05" | TE Connectivity
RoHS : Compliant

1,000 : $7.41
500 : $7.64
250 : $7.87
100 : $8.12
50 : $8.37
1 : $9.17

5788793-1

TE Connectivity

09 HTMSFL PLUG RA 318 (SL,BL) Number of Positions: 9 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 1 Ampseal Header | 9 Plug Board-to-Board Board Mount | TE Connectivity
RoHS : Compliant

1,000 : $4.86
500 : $5.0
250 : $5.15
100 : $5.32
50 : $5.48
1 : $6.01