C2658-R Price, Reseller, Stock

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to UHF Male Low Loss Cable 24 Inch Length Using LMR-400 Coax, LF Solder., Radio frequency assembly N male to UHF male low loss cable 24 inch length using LMR-400 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to UHF male low loss cable 24 inch length using LMR-400 coax, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and UHF cable connection on the other. Our low loss N type to UHF cable assemblies have a male gender on end 1 and male on end 2. PE3C2650LF-24 can also be known as a low loss type N plug to UHF plug cable assembly and will be shipped same-day as it is purchased. N type plug to UHF plug cable assembly PE3C2650LF-24 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2650LF-24 can also be used in the other direction and will be UHF male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to UHF cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to UHF male low loss cable 24 inch length using LMR-400 coax, LF solder.

1 : $95.99
25 : $91.19
50 : $86.39
100 : $82.55

PE3C2651/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male to BNC Male Cable Using LMR-400 Coax with HeatShrink. PE3C2651/HS is a N male to BNC male cable using LMR-400 coax. This Pasternack N male to BNC male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm BNC for connector 2. Our male N to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2651/HS N male to BNC male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C2657

Pasternack Enterprises

PE3C2653

Pasternack Enterprises

PE3C2657/HS

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Cable Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA male cable using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male cable using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2657/HS can also be known as a right angle SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C2657/HS is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2657/HS can also be used in the other direction and will be SMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male cable using PE-SR402FL coax with heatshrink.

PE3C2650LF-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to UHF Male Low Loss Cable 12 Inch Length Using LMR-400 Coax, LF Solder., Radio frequency assembly N male to UHF male low loss cable 12 inch length using LMR-400 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to UHF male low loss cable 12 inch length using LMR-400 coax, LF solder, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and UHF cable connection on the other. Our low loss type N to UHF cable assemblies have a male gender on end 1 and male on end 2. PE3C2650LF-12 can also be known as a low loss type N plug to UHF plug cable assembly and will be shipped same-day as it is purchased. N type plug to UHF plug cable assembly PE3C2650LF-12 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this N type male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2650LF-12 can also be used in the other direction and will be UHF male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to UHF cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to UHF male low loss cable 12 inch length using LMR-400 coax, LF solder.

1 : $93.99
25 : $89.29
50 : $84.59
100 : $80.83

PE3C2657/HS-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to SMA Male Cable 24 Inch Length Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA male cable 24 inch length using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male cable 24 inch length using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2657/HS-24 can also be known as a right angle SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C2657/HS-24 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2657/HS-24 can also be used in the other direction and will be SMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male cable 24 inch length using PE-SR402FL coax with heatshrink.

1 : $119.99
25 : $113.99
50 : $107.99
100 : $103.19

PE3C2651

Pasternack Enterprises

PE3C2653LF

Pasternack Enterprises

Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm.

PE3C2650

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UHF, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm. N Male to UHF Male Cable Using LMR-400 Coax. PE3C2650 is a N male to UHF male cable using LMR-400 coax. This Pasternack N male to UHF male cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm UHF for connector 2. Our male N to male UHF cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2650 N male to UHF male cable assembly is constructed with LMR-400 coax, * LMR™ is a trademark of Times Microwave Systems.

PE3C2656

Pasternack Enterprises

PE3C2653LF/HS

Pasternack Enterprises

PE3C2657LF

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Male Cable Using PE-SR402FL Coax, LF Solder. PE3C2657LF is a SMA male right angle to SMA male cable using PE-SR402FL coax. This Pasternack SMA male right angle to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to male SMA cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C2657LF SMA male right angle to SMA male cable assembly is constructed with PE-SR402FL coax.

PE3C2654/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG8X, RF Cable Type: RG8X, RF Cable Impedance: 50 Ohm. BNC Male Right Angle to BNC Female Cable Using RG8X Coax with HeatShrink. PE3C2654/HS is a BNC male right angle to BNC female cable using RG8X coax. This Pasternack BNC male right angle to BNC female cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm BNC for connector 2. BNC right angle to BNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our male BNC right angle to female BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C2654/HS BNC male right angle to BNC female cable assembly is constructed with RG8X coax.

PE3C2657/HS-18

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FL, RF Cable Type: PE-SR402FL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Male Right Angle to SMA Male Cable 18 Inch Length Using PE-SR402FL Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA male cable 18 inch length using PE-SR402FL coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male cable 18 inch length using PE-SR402FL coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2657/HS-18 can also be known as a right angle SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C2657/HS-18 is built with PE-SR402FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2657/HS-18 can also be used in the other direction and will be SMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male cable 18 inch length using PE-SR402FL coax with heatshrink.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

TE Connectivity

DRC26-50BT

TE Connectivity

BOOT, 50P, 20SZ, PLG/REC, ST, BLK Number of Positions: 50 Primary Product Color: Black Protection & Strain Relief Accessory Type: Boot Primary Product Material: PVC Cable Exit Angle: 180 ° Automotive Connector Cap & Cover | 50 Black Boot PVC | Part Number: DRC26-50BT | Internal Number: DRC26-50BT | TE Connectivity
RoHS : Compliant

1 : $4.9

568

DRC26-50S04

TE Connectivity

PLG, 50P, BLK, N, 04 Nominal Voltage Architecture: 24 V 12 V 48 V Number of Positions: 50 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm Deutsch Drc Housing | 24 V 50 | Part Number: DRC26-50S04 | Internal Number: DRC26-50S04 | Alias Number: ZPF000000000131366 | 1.02 mm | TE Connectivity
RoHS : Compliant

1 : $31.13

255

DRC26-50S05

TE Connectivity

PLG, 50P, BLK, N, 05 Nominal Voltage Architecture: 48 V 24 V 12 V Number of Positions: 50 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm Deutsch Drc Housing | 48 V 50 | Part Number: DRC26-50S05 | Internal Number: DRC26-50S05 | Alias Number: ZPF000000000131367 | 1.02 mm | TE Connectivity
RoHS : Compliant

1 : $30.73

235

DRC26-50S03

TE Connectivity

PLG, 50P, BLK, N, 03 Nominal Voltage Architecture: 48 V 12 V 24 V Number of Positions: 50 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm Deutsch Drc Housing | 48 V 50 | Part Number: DRC26-50S03 | Internal Number: DRC26-50S03 | Alias Number: ZPF000000000131365 | 1.02 mm | TE Connectivity
RoHS : Compliant

1 : $31.13

101

DRC26-50S02

TE Connectivity

PLG, 50P, BLK, N, 02 Nominal Voltage Architecture: 48 V 12 V 24 V Number of Positions: 50 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm Deutsch Drc Housing | 48 V 50 | Part Number: DRC26-50S02 | Internal Number: DRC26-50S02 | Alias Number: ZPF000000000131364 | 1.02 mm | TE Connectivity
RoHS : Compliant

1 : $31.13

DRC26-50S07

TE Connectivity

PLG, 50P, BLK, N, 07 Nominal Voltage Architecture: 48 V 12 V 24 V Number of Positions: 50 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm Deutsch Drc Housing | 48 V 50 | Part Number: DRC26-50S07 | Internal Number: DRC26-50S07 | Alias Number: ZPF000000000131369 | 1.02 mm | TE Connectivity
RoHS : Compliant

1 : $31.13

DRC26-50S09

TE Connectivity

PLG, 50P, BLK, N, 09 Nominal Voltage Architecture: 48 V 12 V 24 V Number of Positions: 50 Connector & Housing Type: Housing for Female Terminals Connector System: Wire-to-Wire Mating Pin Diameter: 1.02 mm Deutsch Drc Housing | 48 V 50 | Part Number: DRC26-50S09 | Internal Number: DRC26-50S09 | Alias Number: ZPF000000000131371 | 1.02 mm | TE Connectivity
RoHS : Compliant

1 : $31.13

Vyrian

LTC2656IFE-L12#TRPBF

Analog Devices Inc

D/A Converter, 1 Func, Serial Input Loading, 4.2us Settling Time, PDSO20
RoHS : Compliant

12,292

LTC2654BIUF-L16-TRPBF

Analog Devices Inc

10,990

LTC2654BCGN-H16-TRPBF

Analog Devices Inc

10,232

DRC26-50S03

TE Connectivity

Combination Line Connector, 50 Contact(s), Female, Plug
RoHS : Compliant

9,974

CC2650EMK-4XS

Texas Instruments

9,613

TLC2654CJ

Texas Instruments

Operational Amplifier, 1 Func, 34uV Offset-Max, CMOS, CDIP14
RoHS : Not Compliant

9,587

HMC265LM3

Analog Devices Inc

Down Converter, GAAS
RoHS : Compliant

9,553

HMC265LM3TR

Analog Devices Inc

Down Converter, GAAS
RoHS : Compliant

8,973

TLC2654CL

Texas Instruments

Operational Amplifier, 1 Func, 34uV Offset-Max, CMOS, MBCY8
RoHS : Not Compliant

8,714

LTC2656IFE-L12-TRPBF

Analog Devices Inc

6,950

TLC2654C-8DRG4

Texas Instruments

Operational Amplifier, 1 Func, 34uV Offset-Max, CMOS, PDSO8
RoHS : Compliant

5,729

TLC2654ACJG

Texas Instruments

Operational Amplifier, 1 Func, 24uV Offset-Max, CMOS, CDIP8
RoHS : Not Compliant

5,694

DRC26-50S01

TE Connectivity

Combination Line Connector, 50 Contact(s), Female, Plug
RoHS : Compliant

4,778

TLC2652MJB

Texas Instruments

Operational Amplifier, 1 Func, 10uV Offset-Max, CMOS, CDIP14
RoHS : Not Compliant

4,046

2SC2655

Jiangsu Changjiang Electronics Technology

Small Signal Bipolar Transistor, 2A I(C), 50V V(BR)CEO, 1-Element, NPN, Silicon, TO-92

420

Win Source Electronics

BSC265N10LSFG

Infineon Technologies AG

MOSFET N-CH 100V 40A TDSON-8
RoHS : Compliant

540 : $0.5591
430 : $0.5819
335 : $0.6046
235 : $0.65
150 : $0.6728
70 : $0.7182

65,000

BSC265N10LSFGATMA1

Infineon Technologies AG

MOSFET N-CH 100V 40A TDSON-8 / Trans MOSFET N-CH 100V 6.5A Automotive 8-Pin TDSON EP T/R
RoHS : Compliant

540 : $0.5591
430 : $0.5819
335 : $0.6046
235 : $0.65
150 : $0.6728
70 : $0.7182

61,940

CC2652R74T0RGZR

Texas Instruments

SIMPLELINK ARM CORTEX-M4F MULTIP / IC RF TxRx + MCU 802.15.4, Bluetooth Bluetooth v5.2, Thread, Zigbee® 2.4GHz ~ 2.48GHz 48-VFQFN Exposed Pad
RoHS : Compliant

98 : $3.075
79 : $3.2
61 : $3.325
42 : $3.575
28 : $3.7
13 : $3.95

28,550

CC2652R1FRGZR