 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
D120/6-SHT1-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
 Master Electronics | FFSD-17-D-12.00-01-N | Samtec Inc | Flat Ribbon Cable - IDC Receptacle - 34 Ways - 305 mm - 1.27 mm. RoHS : Compliant |
| 106 | |
| FFSD-20-D-120.0-01-N | Samtec Inc | .050 Low Profile Tiger Eye™ IDC Ribbon Cable Assembly RoHS : Compliant |
| 4 | ||
| ERA-2AKD120X | Panasonic Electronic Components | Res Thin Film 0402 12 Ohm 0.5% 0.063W(1/16W) ±100ppm/°C Pad SMD Automotive T/R RoHS : Compliant |
| 0 | ||
| ERJ-PA2D1202X | Panasonic Electronic Components | 0402 HIGH POWER RoHS : Compliant |
| 0 | ||
| ERJ-U14D1202U | Panasonic Electronic Components | Anti-Sulfur Thick Film Resistor - 12 Kohm - ±0.5% - 0.5W - 1210 - -55°C to +155°C - AEC-Q200 - Tape&Reel RoHS : Compliant |
| 0 | ||
| ERJ-UP6D1202V | Panasonic Electronic Components | SMD Anti-Sulfur Resistor - 12K Ohm ±0.5% - 0.5W - 0805 RoHS : Compliant |
| 0 | ||
| ESD-120-TT-04 | Samtec Inc | .100 Elevated Double Row Screw Machine Socket Strip RoHS : Compliant |
| 0 | ||
| FFMD-13-D-12.00-01-L-SR | Samtec Inc | Cable Assembly Flat 0.304m 30AWG 26 POS IDC Connector to 26 POS IDC Connector PL-PL IDT-IDT RoHS : Compliant |
| 0 | ||
| FFSD-05-D-12.09-01-N | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FFSD-08-D-12.00-01-N-RN1-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FFSD-10-D-12.00-01-N-RN2 | Samtec Inc | Cable Assembly Ribbon 0.305m 20 POS IDC to 20 POS IDC RCP-RCP RoHS : Compliant |
| 0 | ||
| FFSD-15-D-12.00-01-N-D05 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| FFSD-19-D-12.00-01-N | Samtec Inc | This flat Tiger Eye™ IDC socket cable system features an exceptionally low profile design with a multi-finger BeCu contact system for high reliability and high cycle applications. Optional rugged strain relief is available for a more robust connection in RoHS : Compliant |
| 0 | ||
| FFSD-20-D-12.00-01-N-D07 | Samtec Inc | This flat Tiger Eye™ IDC socket cable system features an exceptionally low profile design with a multi-finger BeCu contact system for high reliability and high cycle applications. Optional rugged strain relief is available for a more robust connection in RoHS : Compliant |
| 0 | ||
| FFSD-20-D-12.00-01-N-D12-M | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Avnet Americas | LED1202JR | STMicroelectronics | LED Driver, 12 Outputs, 2.6V to 5V in, 5V/240mA out, WLCSP-20 - Tape and Reel (Alt: LED1202JR) RoHS : Not Compliant |
| 72,000 | |
| MMBD1204 | onsemi | Small Signal Diode, Dual Common Cathode, 100 V, 200 mA, 1.1 V, 4 ns, 2 A - Tape and Reel (Alt: MMBD1204) RoHS : Compliant |
| 12,000 | ||
| SD1206S040S2R0 | Kyocera AVX Components | Schottky Rectifier, 40 V, 2 A, Single, SOD-123, 2 Pins, 500 mV - Tape and Reel (Alt: SD1206S040S2R0) RoHS : Compliant |
| 9,000 | ||
| VJ0402D120JXCAJ | Vishay Intertechnologies | SMD Multilayer Ceramic Capacitor, 12 pF, 200 V, 0402 [1005 Metric], ? 5%, C0G / NP0 - Tape and Reel (Alt: VJ0402D120JXCAJ) RoHS : Compliant |
| 9,000 | ||
| IPD1-20-D-M | Samtec Inc | - Rail/Tube (Alt: IPD1-20-D-M) RoHS : Compliant |
| 1,217 | ||
| RN55D1201FB14 | Vishay Intertechnologies | - Bulk (Alt: RN55D1201FB14) RoHS : Not Compliant |
| 1,000 | ||
| RN55D1200FB14 | Vishay Intertechnologies | - Bulk (Alt: RN55D1200FB14) RoHS : Not Compliant |
| 1,000 | ||
| KD1204PKB3.(2).GN | SUNON USA | - Bulk (Alt: KD1204PKB3.(2).GN) RoHS : Compliant |
| 390 | ||
| IPD1-20-D | Samtec Inc | - Bulk (Alt: IPD1-20-D) RoHS : Compliant |
| 200 | ||
| AT06-2S-LED1201 | Amphenol Corporation | - Boxed Product (Development Kits) (Alt: AT06-2S-LED1201) RoHS : Compliant |
| 85 | ||
| MEJ2D1209SC | Murata Manufacturing Co Ltd | - Rail/Tube (Alt: MEJ2D1209SC) RoHS : Compliant |
| 84 | ||
| NCS6D1205C | Murata Manufacturing Co Ltd | - Rail/Tube (Alt: NCS6D1205C) RoHS : Compliant |
| 30 | ||
| MGJ1D120603SC | Murata Manufacturing Co Ltd | Isolated Through Hole DC/DC Converter, ITE, SIP, 1 W, 2 Output, 6 V - Rail/Tube (Alt: MGJ1D120603SC) RoHS : Compliant |
| 25 | ||
| PMD1208PMB3-A.(2).GN | SUNON USA | - Bulk (Alt: PMD1208PMB3-A.(2).GN) RoHS : Compliant |
| 20 | ||
| TW-17-03-G-D-120-140 | Samtec Inc | - Bulk (Alt: TW-17-03-G-D-120-140) RoHS : Compliant |
| 3 | ||
 Newark | ERJU2RD1201X | Panasonic Electronic Components | Chip Res Smd, 1K2, ±0.5%, 100Mw; |Panasonic ERJU2RD1201X RoHS : Compliant |
| 7,290 | |
| ERJU2RD1201X | Panasonic Electronic Components | Chip Res Smd, 1K2, ±0.5%, 100Mw; |Panasonic ERJU2RD1201X RoHS : Compliant |
| 7,290 | ||
| MTLW-101-07-G-D-120 | Samtec Inc | Pin Header, Board-To-Board, 2 Rows; |Samtec, Inc. MTLW-101-07-G-D-120 RoHS : Compliant |
| 3,572 | ||
| MTMM-102-03-G-D-120 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 4Pos; |Samtec, Inc. MTMM-102-03-G-D-120 RoHS : Compliant |
| 1,766 | ||
| TW-02-03-G-D-120-100 | Samtec Inc | Conn Stack Brd, 2Mm, 4Pos, Hdr; |Samtec, Inc. TW-02-03-G-D-120-100 RoHS : Compliant |
| 1,647 | ||
| TW-02-01-T-D-120-060 | Samtec Inc | Conn Stack Brd, 2Mm, 4Pos, Hdr; |Samtec, Inc. TW-02-01-T-D-120-060 RoHS : Compliant |
| 1,455 | ||
| MTLW-103-05-S-D-120 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 6Pos; |Samtec, Inc. MTLW-103-05-S-D-120 RoHS : Compliant |
| 901 | ||
| MTMM-106-02-L-D-120 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 12Pos; |Samtec, Inc. MTMM-106-02-L-D-120 RoHS : Compliant |
| 576 | ||
| MTMM-110-03-G-D-120 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 20Pos; |Samtec, Inc. MTMM-110-03-G-D-120 RoHS : Compliant |
| 435 | ||
| MTMM-110-04-T-D-120 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 20Pos; |Samtec, Inc. MTMM-110-04-T-D-120 RoHS : Compliant |
| 435 | ||
| SD-120-S-2 | Samtec Inc | ".100" Double Row Screw Machine Socket S; |Samtec, Inc. SD-120-S-2 RoHS : Not Compliant |
| 142 | ||
| MTMM-127-02-L-D-120 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 54Pos; |Samtec, Inc. MTMM-127-02-L-D-120 RoHS : Compliant |
| 76 | ||
| SA1-RTD-120 | Omega Engineering | Rtd, 100 Ohm, -73 To 260Deg C; |Omega SA1-RTD-120 RoHS : Compliant |
| 31 | ||
| FFSD-17-D-12.00-01-N | Samtec Inc | Cable Assy, 34P Idc Rcpt-Rcpt, 305Mm; |Samtec, Inc. FFSD-17-D-12.00-01-N RoHS : Compliant |
| 9 | ||
| AMED120-48SNZ | Aimtec | Psu Ac/Dc Din, Ite & Household, 1 Output; Available Until Stocks Are Exhausted Alternative Available |Aimtec AMED120-48SNZ RoHS : Compliant |
| 2 | ||
 Analog Devices Inc | DS1220AD-120+ | Analog Devices Inc | 16k Nonvolatile SRAM RoHS : Compliant |
| 0 | |
 RS | AT06-2S-LED1201 | Amphenol Sine Systems | CONN RECT PLUG HSG 2-WAY LED 12V SZ 16 20-14 AWG AT SER GRAY NICKEL CLEAR ENDCAP |
| 890 | |
| 92S7A22D-120 (I927002E) | Schneider Electric | RELAY, 30 A, 120 VAC, POWER, 1600OHMS, SILVER ALLOY, 4 VA, DPST-NO, W92 SERIES |
| 333 | ||
F1892D1200 | Crydom Inc | MODULE, POWER, DIODE, SINGLE, CUR-RTG 90A, V-RTG 480AC, PK-V-RTG 1200AC RoHS : Compliant |
| 9 | ||
| FS 2996D120-F3M2 | Pizzato Elettrica Srl | FS SERIES SAFETY SWITCH WITH SEPARATE ACTUATOR WITH LOCK |
| 6 | ||
| F1892RD1200 | Crydom Inc | MODULE, POWER, DUAL DIODE, SERIES, CUR-RTG90A, V-RTG 480AC, PK-V-RTG 1200AC RoHS : Compliant |
| 5 | ||
| ARD-120-AAA | atc Diversified Electronics | DUPLEXOR ALTERNATING RELAY PLUG-IN 120 VAC WITH SOSO FUNCTION & SEL SW. |
| 5 | ||
| CMD-120-ASE-20 | atc Diversified Electronics | UNIVERSAL AC CURRENT MONITOR/RELAY, 120V AC, 4.0 TO 20A |
| 5 | ||
| CD120-250-ABZC-28V/V-SM18-B2 | BEI Sensors | LINEAR CABLE ENCODER, 250 PULSES PER INCH WITH CABLE WIPER, 10 CABLE |
| 3 | ||
| BAM021W (BMS RS-M-D12-0300-00) | Balluff Inc | BMS - MOUNTING ACCESSORIES, BMS RS-M-D12-0300-00 |
| 2 | ||
| CD120-500-ABZC-28V/V-SM18 | BEI Sensors | LINEAR CABLE ENCODER, 500 PULSES PER INCH, 10 CABLE |
| 1 | ||
| D120 | Siemens | BRKR QD 3/4 1P 120V 20A 10K UL CLASS |
| 0 | ||
| D120 | Browning (Bearings) | GRIPBELTS |
| 0 | ||
| D120 | Gates | V-BELT, D SECTION, SINGLE SECTION, HI-POWER II SERIES |
| 0 | ||
| D120 | OPTIBELT GmbH | OPTIBELT VB, D' BELT SECTION, 1-1/4" WIDTH, 125" OUTSIDE LENGTH |
| 0 | ||
| D120 | Goodyear Belts | CLASSICAL V-BELT, 1 BAND, D' SECTION |
| 0 | ||
 STMicroelectronics | LED1202QTR | STMicroelectronics | 12-Channel Low Quiescent Current LED Driver RoHS : Compliant |
| 12,175 | |
| LED1202JR | STMicroelectronics | 12-Channel Low Quiescent Current LED Driver RoHS : Compliant |
| 8,414 | ||
STD120N4LF6 | STMicroelectronics | N-channel 40 V, 3.1 mOhm, 80 A, DPAK STripFET(TM) VI DeepGATE(TM) Power MOSFET RoHS : Compliant |
| 2,562 | ||
| STD120N4F6 | STMicroelectronics | N-channel 40 V, 3.5 mOhm, 80 A STripFET F6 Power MOSFET in DPAK package RoHS : Compliant |
| 2,265 | ||
L4931ABD120TR | STMicroelectronics | Very low drop voltage regulators with inhibit RoHS : Compliant |
| 397 | ||
 Microchip Technology Inc | APT15D120KG | Microchip Technology Inc | FRED D 1200 V 15 A TO-220, TO-220, Projected EOL: 2046-04-30 RoHS : Compliant |
| 1,220 | |
| APT2X101D120J | Microchip Technology Inc | FRED D 1200 V 100 A Dual Parallel SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 338 | ||
| APT30D120BG | Microchip Technology Inc | FRED D 1200 V 30 A TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 265 | ||
| APT30D120BCTG | Microchip Technology Inc | FRED D 1200 V 30 A TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 75 | ||
| APT60D120SG | Microchip Technology Inc | FRED D 1200 V 60 A TO-268, TO-268, Projected EOL: 2046-04-30 RoHS : Compliant |
| 54 | ||
| APT2X100D120J | Microchip Technology Inc | FRED D 1200 V 100 A Dual Anti-Parallel SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 33 | ||
| APT2X30D120J | Microchip Technology Inc | FRED D 1200 V 30 A Dual Anti-Parallel SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 28 | ||
| APT2X31D120J | Microchip Technology Inc | FRED D 1200 V 30 A Dual Parallel SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 25 | ||
| MSCDGD120A062EMG-C002 | Microchip Technology Inc | 2ASC-12A2HP & 62CA5-00001-V03 (Plug and Play Gate driver A2 with 62CA5), Projected EOL: 2051-07-21 - Contact for Pricing | 25 | |||
| APT60D120D | Microchip Technology Inc | FRED D 1200 V 60 A DIE, Projected EOL: 2046-04-30 - Contact for Pricing | 0 | |||
| APT15D120BG | Microchip Technology Inc | FRED D 1200 V 15 A TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT2X61D120J | Microchip Technology Inc | FRED D 1200 V 60 A Dual Parallel SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT2X60D120J | Microchip Technology Inc | FRED D 1200 V 60 A Dual Anti-Parallel SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| VCC1-B3D-120M000000 | Microchip Technology Inc | VCC1-B3D-120M000000, LDFN, Projected EOL: 2046-01-24 RoHS : Compliant |
| 0 | ||
| VXB2-1D1-20M0000000 | Microchip Technology Inc | VXB2-1D1-20M0000000, HC-49/U, Projected EOL: 2046-01-25 RoHS : Compliant |
| 0 | ||
 Bisco Industries | D12003-012-4 | Tinnerman Fasteners | 10,742 | |||
| NAS43DD1-20FC | Mini-Mac Inc | 3,836 | ||||
| H-131CRD-120 | Bivar Inc | 271 | ||||
| NAS43DD1-20FC | NAS SPACERS/STANDOFFS/HANDLES | 50 | ||||
| D120M-8 | WM Berg | 30 | ||||
| NAS43DD1-20A | RAF Electronic Hardware | 27 | ||||
| M80-4D12005FC | MISC. INDUSTRIAL CONNECTORS | 23 | ||||
| NAS43DD1-20N | NAS SPACERS/STANDOFFS/HANDLES | 16 | ||||
| 92S11A22D-120 | MISC. RELAYS | 9 | ||||
| PLCD12006 | MISCELLANEOUS | 6 | ||||
| SA1-RTD-120 | Omega Engineering | RoHS : Compliant | 5 | |||
| HES3D-120BL | Sugatsune Kogyo Co Ltd | 3 | ||||
| 1487D120SS | Hammond Manufacturing | RoHS : Compliant | 1 | |||
| FID1208M | Altech Corporation | 1 | ||||
| PD1-20 | WM Berg | 1 | ||||
 Rochester Electronics | 2SD1207S-AE | onsemi | Trans BJTs Single 50V 2A TO-226-3 T/R RoHS : Compliant |
| 104,360 | |
| 2SD1207T-OMR-AE | onsemi | Trans BJTs Single 50V 2A TO-226-3 T/R RoHS : Compliant | 31,000 | |||
| BSM15GD120DLCE3224BOSA1 | Infineon Technologies AG | IGBT MOD 1.2kV 35A 145W Tray RoHS : Compliant |
| 347 | ||
| BSM35GD120DLCE3224BOSA1 | Infineon Technologies AG | IGBT MOD 1.2kV 70A 280W Tray RoHS : Compliant |
| 1 | ||
| TD120N16SOFHPSA1 | Infineon Technologies AG | SCR Board Standard Recovery 1.6kV 190A Module Tray RoHS : Compliant |
| 2 | ||
| ESD120B1W0201E6327XTSA1 | Infineon Technologies AG | Trans Voltage Suppressor Diode RoHS : Compliant |
| 3,612,226 | ||
| BSM50GD120DLCBPSA1 | Infineon Technologies AG | Low Power Econo RoHS : Compliant |
| 70 | ||
| DD1200S33KL2CB5NOSA1 | Infineon Technologies AG | IGBT MOD 3.3kV 1.8kW Module RoHS : Not Compliant |
| 13 | ||
| RD120E-AZ | NEC Electronics Group | Zener Diode Single 120V 500mW DO35 RoHS : Compliant |
| 82,200 | ||
| RD120E-AZ | Renesas Electronics Corporation | Zener Diode Single 120V 500mW DO35 RoHS : Compliant |
| 195,530 | ||
| RD120P-T1-AZ | Renesas Electronics Corporation | 1W Power Mini Mold Zenner Diode RoHS : Compliant |
| 15,000 | ||
| UPD120N33TA(52)-E1-AT | Renesas Electronics Corporation | IC VOLT REG Fixed 1 REG 3.3V 300mA SOT-23-5 RoHS : Compliant |
| 168,000 | ||
| 2SD1207S-AE | SANYO Semiconductor Co Ltd | Trans BJTs Single 50V 2A TO-226-3 T/R RoHS : Compliant |
| 84 | ||
| LED1202QTR | STMicroelectronics | LED Driver ICs Linear 20mA 20-QFN T/R RoHS : Compliant |
| 0 | ||
| LY T66F-ABBB-4D-1-20-R33-Z | ams OSRAM Group | LY T66F - TOPLED Black, Yellow LED RoHS : Compliant |
| 2,000 | ||
 Sager | ESD-120-TT-04 | Samtec Inc | IC & Component Sockets RoHS : Compliant | 0 | ||
| FFMD-13-D-12.00-01-L-SR | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| FFSD-10-D-12.00-01-N-RN2 | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| FFSD-17-D-12.00-01-N | Samtec Inc | Ribbon Cables / IDC Cables .050 Low Profile Tiger Eye IDC Ribbon Cable Assembly RoHS : Compliant |
| 0 | ||
| FFSD-19-D-12.00-01-N | Samtec Inc | Ribbon Cables / IDC Cables .050 Low Profile Tiger Eye IDC Ribbon Cable Assembly RoHS : Compliant |
| 0 | ||
| FFSD-20-D-12.00-01-N-D07 | Samtec Inc | Ribbon Cables / IDC Cables .050 Low Profile Tiger Eye IDC Ribbon Cable Assembly RoHS : Compliant |
| 0 | ||
| FFSD-20-D-120.0-01-N | Samtec Inc | Ribbon Cables / IDC Cables .050 Low Profile Tiger Eye IDC Ribbon Cable Assembly RoHS : Compliant |
| 0 | ||
| FW-04-03-L-D-120-180 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Micro Board Stacking Header, 0.050 Pitch RoHS : Compliant |
| 0 | ||
| FW-10-03-G-D-120-240-TR | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Micro Board Stacking Header, 0.050 Pitch RoHS : Compliant |
| 0 | ||
| BBD-120-G-C | Samtec Inc | Headers & Wire Housings .100 Double Row RoHS : Compliant |
| 0 | ||
| BSPD120240D3K | Eaton Bussmann | Surge Suppressors SPD, 120KA, STD W/COUNTERPKG., NEMA 1 EN | 0 | |||
| BTD1-20-08-1-B-SB | TE Connectivity | Circular MIL Spec Backshells BTD1-20-08-1-B-SB RoHS : Not Compliant | 0 | |||
| BTD1-20-11-1-ZB | TE Connectivity | Circular MIL Spec Backshells BTD1-20-11-1-ZB RoHS : Compliant | 0 | |||
| BTD1-20-22-1-B-SB | TE Connectivity | Circular MIL Spec Backshells BTD1-20-22-1-B-SB RoHS : Not Compliant | 0 | |||
| CD-1201 | Panduit Corp | CRIMP DIE FOR CT-1201 CRIMP TOOL, SQUARE |
| 0 | ||
 TME | PFC-D1206LF-03-6122-4882-F | TT Electronics plc | Resistor: thin film |
| 7,348 | |
| FFSD-17-D-12.00-01-N | Samtec Inc | Ribbon cable with IDC connectors; IDC socket,both sides; 30AWG RoHS : Compliant |
| 2 | ||
| AMED120-48SNZ | Aimtec | Power supply: switching; for DIN rail; 120W; 48VDC; 2.5A; -20÷60°C RoHS : Compliant |
| 1 | ||
| XL3D-120/1A | TE Connectivity | Transformer: current; Iin: 120A; Iout: 1A; 1@max1.5VA,3@max2.5VA |
| 0 | ||
| SG73S2ATTD1203F | KOA Speer Electronics Inc | Resistor: thick film; 120kΩ; SMD; 0805; 750mW; ±1%; SG73S; 400V RoHS : Compliant |
| 0 | ||
| ALUG708GD120-C | Gainta Enclosures | Enclosure: multipurpose; X: 177.6mm; Y: 129mm; Z: 61.1mm; aluminium |
| 0 | ||
AM2D-1205SH40Z | Aimtec | Converter: DC/DC; 2W; Uout: 5VDC; SIP7; THT; AM2D-Z; Efficiency: 77% RoHS : Compliant |
| 0 | ||
| MEA1D1209SC | Murata Power Solutions | Converter: DC/DC; 1W; Uin: 10.8÷13.2VDC; Uout: 9VDC; Uout2: -9VDC RoHS : Compliant |
| 0 | ||
| RN73R2BTTD1202D25 | KOA Speer Electronics Inc | Resistor: thin film; 12kΩ; SMD; 1206; 250mW; ±0.5%; RN73R; 200V RoHS : Compliant |
| 0 | ||
| F1827SD1200 | Crydom Inc | Module: thyristor; double series; 1.2kV; 25A; F18; Ufmax: 1.55V RoHS : Compliant |
| 0 | ||
AM1D-1207SH52Z | Aimtec | Converter: DC/DC; 1W; Uout: 7.2VDC; SIP7; THT; AM1D-Z; OUT: 1 RoHS : Compliant |
| 0 | ||
AM1D-1209DH30-RZ | Aimtec | Converter: DC/DC; 1W; Uin: 10.8÷13.2VDC; Uout: 9VDC; Uout2: -9VDC RoHS : Compliant |
| 0 | ||
| AM2D-1203DH52Z | Aimtec | Converter: DC/DC; 2W; Uout: 3.3VDC; Uout2: -3.3VDC; Iout: 200mA; SIP7 RoHS : Compliant |
| 0 | ||
| AM1D-120505DZ | Aimtec | Converter: DC/DC; 1W; Uout: 5VDC; Uout2: -5VDC; Iout: 100mA; SIP7; THT RoHS : Compliant |
| 0 | ||
| AM1D-1205DH30Z | Aimtec | Converter: DC/DC; 1W; Uin: 12VDC; Uout: 5VDC; Uout2: -5VDC; SIP7; THT RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | MCR006YLPD1202 | ROHM Semiconductor | 方形贴片电阻器 (MCR系列) <车载品 *对应AEC-Q200> RoHS : Compliant |
| 15,000 | |
| MCR006YLPD1203 | ROHM Semiconductor | 方形贴片电阻器 (MCR系列) <车载品 *对应AEC-Q200> RoHS : Compliant |
| 15,000 | ||
| SDR10EZPD1201 | ROHM Semiconductor | 抗浪涌贴片电阻器 RoHS : Compliant |
| 10,000 | ||
| SDR03EZPD1202 | ROHM Semiconductor | 抗浪涌贴片电阻器 RoHS : Compliant |
| 10,000 | ||
| ESR18EZPD1202 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 10,000 | ||
| SDR10EZPD1202 | ROHM Semiconductor | 抗浪涌贴片电阻器 RoHS : Compliant |
| 10,000 | ||
| SDR03EZPD1201 | ROHM Semiconductor | 抗浪涌贴片电阻器 RoHS : Compliant |
| 10,000 | ||
| ESR10EZPD1202 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 5,000 | ||
| ESR10EZPD1201 | ROHM Semiconductor | Anti-surge Chip Resistors RoHS : Compliant |
| 5,000 | ||
| 8SLVD1204NLGI/W | Renesas Electronics Corporation | IC CLK BUFFER 2:4 2GHZ 16VFQFN RoHS : Compliant | 999 | |||
| OLKD1201A821MF | Ymin | 500 | ||||
| LKFD1201C471MF | Ymin | 500 | ||||
| MMBD1205 | onsemi | MMBD Series 350 mW 100 V 200 mA Surface Mount Small Signal Diode - SOT-23-3 RoHS : Compliant | 109 | |||
| DS1220AD-120+ | Analog Devices Inc | DS1220 Series 16 kb (2 k x 8) 120 ns Commercial Temp Non-Volatile SRAM - DIP-24 RoHS : Compliant | 16 | |||
| 8SLVD1204NLGI8 | Renesas Electronics Corporation | IC CLK BUFFER 2:4 2GHZ 16VFQFN RoHS : Compliant | 16 | |||
 ComSIT USA | B72570D120A60 | AVAILABLE EU | 14,787 | |||
| WK73R2BTTD1201F | KOA Speer Electronics Inc | AVAILABLE EU RoHS : Compliant | 172,500 | |||
| RK73H2BTTD1201F | KOA Speer Electronics Inc | AVAILABLE EU RoHS : Compliant | 322,500 | |||
ComSIT USA | RK73H1JTTD1201F | KOA Speer Electronics Inc | Fixed resistor, 1.2 kOhm, 1%, 0.1W, KOA RoHS : Compliant | 45,000 | ||
| RK73H2ATTD1202F | KOA Speer Electronics Inc | Fixed Resistor, Thick Film/metal Glaze, 0.25W, 12000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805 RoHS : Compliant | 30,000 | |||
| CD1206-B240 | Bourns Inc | Rectifier Single Schottky 40V 2A 1206 T/R RoHS : Compliant | 12,000 | |||
| LNG81271AT51AD120000MHZ | Nihon Dempa Kogyo Co Ltd | Electronic Component RoHS : Compliant | 5,000 | |||
| SD1206S040S2R0 | Kyocera AVX Components | SCHOTTKY BARRIER RECTIFIER DIODE Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 40V V(RRM), Silicon RoHS : Compliant | 3,000 | |||
| STD120N4F6 | STMicroelectronics | Power Field-Effect Transistor, 80A I(D), 40V, 0.004ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252 RoHS : Compliant | 2,500 | |||
| IXFD120N25P88 | IXYS Corporation | Electronic Component RoHS : Not Compliant | 1,800 | |||
| B59901D120A40Z15 | TDK Electronics | PTC THERMISTOR FOR LIMIT TEMPERATURE SENSORS PTC Thermistor, 550ohm, Through Hole Mount RoHS : Compliant | 1,400 | |||
| MW4503GD120075 | Samtec Inc | 1 MM X 1 MM CENTERLINE SURFACE MOUNT BOARD STACKER ASSEMBLY Board Stacking Connector, 90 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal RoHS : Not Compliant | 1,200 | |||
IRFD120 | Vishay Siliconix | Small Signal Field-Effect Transistor, 1.3A I(D), 100V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Not Compliant | 800 | |||
| B59901D120A40Z5 | TDK Electronics | PTC THERMISTOR FOR LIMIT TEMPERATURE SENSORS PTC Thermistor, 550ohm, Through Hole Mount RoHS : Compliant | 400 | |||
| YMD12065V | qinlong | Electronic Component RoHS : Compliant | 97 | |||
| BBD120GA | Samtec Inc | (2.54 MM) .100 INCH MACHINED BOARD STACKING STRIP Board Connector, 40 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle RoHS : Compliant | 68 | |||
| PSD1204PBB1A | SUNON USA | Electronic Component RoHS : Not Compliant | 30 | |||
| SKIIP102GD120 | SEMIKRON | Transistor RoHS : Not Compliant | 3 | |||
 GLYN GmbH & Co. KG | TCD1205DG(8,ZK) | Toshiba America Electronic Components | CCD Linear Image Sensor | 3,500 | ||
 Interstate Connecting Components | AT06-2S-LED1201 | Amphenol Sine Systems | PLUG,2-WAY,LED 12V,CLEAR |
| 203 | |
| CD120500ABZC28VVSM18 | BEI Sensors | INCREM 500 PULSES PER INCH LINEAR CABLE TRANSDUCER |
| 1 | ||
| 64HD-1201021120 | TE Connectivity | 64HD-1201021120: CTO-12000000- | 0 | |||
| YD1201500000G | Amphenol Anytek | YD-5.0-12P GREEN - TRIVALENCE | 0 | |||
| SLPHPD120BSB1 | Amphenol Industrial Operations | SL + 12 PLUG 230 SQ BK SEAL K1 |
| 0 | ||
| 667-262-NF-D1201-6 | Glenair Inc | RECEPTACLE COVER FOR 805 MM RoHS : Not Compliant | 0 | |||
| D120190184 | ITT Interconnect Solutions | D120190184 | 0 | |||
| MD120120-46 | ITT Interconnect Solutions | PLUG 120120-0046 | 0 | |||
| 550T006M1F0D1-20 | Glenair Inc | RoHS : Compliant | 0 | |||
| HD1200800000G | Amphenol Anytek | HD - 5.08 - 12P GREY ROHS NL | 0 | |||
| PL00W-500-30D120 | Amphenol Technical Products International | 0 | ||||
| DD120190598 | ITT Interconnect Solutions | DD120190598 | 0 | |||
| D120190572 | ITT Interconnect Solutions | D120190572 | 0 | |||
| SGD-120-3 | TE Connectivity | STRING POT, 120 INCH RANGE RoHS : Compliant |
| 0 | ||
| BTD1-20-06-1-ZB-SB | TE Connectivity | BTD1-20-06-1-ZB-SB RoHS : Compliant | 0 | |||
 NexGen Digital | MMBD1204 | onsemi | RoHS : Compliant | 27,002 | ||
MMBD1203 | Fairchild Semiconductor Corporation | RoHS : Compliant | 19,000 | |||
| STD120N4LF6 | STMicroelectronics | RoHS : Compliant | 4,922 | |||
| MMBD1205 | onsemi | RoHS : Compliant | 2,498 | |||
| PFC-D1206LF-03-10031003F | TT Electronics Resistors | 2,356 | ||||
| HFE21-D120/24-DT2-R(257) | Xiamen Hongfa Electroacoustic Co.,Ltd. | 2,304 | ||||
| MMBD1203 | onsemi | RoHS : Compliant | 2,003 | |||
| IRLD120 | International Rectifier | RoHS : Not Compliant | 141 | |||
| DS1220AD-120+ | Maxim Integrated Products | RoHS : Compliant | 73 | |||
AM29LV017D-120EC | AMD | RoHS : Not Compliant | 11 | |||
AM29F016D-120EC | AMD | RoHS : Not Compliant | 8 | |||
 PEI Genesis | BL135ARD12069XN | Amphenol PCD |
| 76 | ||
| SE16D1208A3.0R12 | SOURIAU-SUNBANK |
| 0 | |||
| AT06-2S-LED1201 | Amphenol Sine Systems |
| 0 | |||
| D120190-184 | ITT Interconnect Solutions | RoHS : Compliant |
| 0 | ||
| S4100E09D12.0S08L04 | SOURIAU-SUNBANK |
| 0 | |||
| S4101P15D12.0S34-00 | SOURIAU-SUNBANK |
| 0 | |||
| SE1D1208A-1.5-8 | SOURIAU-SUNBANK |
| 0 | |||
| SE56D1206AS-34 | SOURIAU-SUNBANK |
| 0 | |||
| SE23D1203-34 | SOURIAU-SUNBANK |
| 0 | |||
| S4100E10D12.0S08L04 | SOURIAU-SUNBANK |
| 0 | |||
| S4100E09D12.0S04L00 | SOURIAU-SUNBANK |
| 0 | |||
| HD120 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| S4100E11D12.0S08L04 | SOURIAU-SUNBANK |
| 0 | |||
| S4101P13D12.0S34-00 | SOURIAU-SUNBANK |
| 0 | |||
| AT06-2S-LED1202 | Amphenol Sine Systems |
| 0 | |||
 Powell Electronics | MTLW-101-07-G-D-120 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 2,358 | |
| MTMM-102-03-G-D-120 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 1,166 | ||
| TW-02-03-G-D-120-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 1,087 | ||
| TW-02-01-T-D-120-060 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 960 | ||
| TW-03-03-F-D-120-090 | Samtec Inc | Cable Assembly, Wire-to-Board, Through-H RoHS : Compliant |
| 712 | ||
| TW-03-12-L-D-120-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 628 | ||
| MTLW-103-05-S-D-120 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 595 | ||
| TW-04-01-S-D-120-010 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 471 | ||
| MTMM-106-02-L-D-120 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 380 | ||
| MTMM-110-03-G-D-120 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 287 | ||
| MTMM-110-04-T-D-120 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 287 | ||
| SD-120-S-2 | Samtec Inc | .100" Double Row Screw Machine Socket S RoHS : Compliant |
| 94 | ||
| FFSD-17-D-12.00-01-N | Samtec Inc | IDC CABLE ASSY 1.27MM 17POS 2ROW RoHS : Compliant |
| 70 | ||
| MTMM-127-02-L-D-120 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 50 | ||
| 1485D120 | Hammond Manufacturing | NEMA12 LAY-IN WW 76WT RoHS : Compliant |
| 3 | ||
 Richardson RFPD | R1D12-0505/P | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT 5V/-5V 0.1A/-0.1A 1W Medic RoHS : Compliant |
| 0 | |
| R1D12-0512/H | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT -12V/12V -0.042A/0.042A 1W RoHS : Compliant |
| 0 | ||
| R1D12-0524/HP-R | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT 24V/-24V -0.021A/0.021A 1W RoHS : Compliant |
| 0 | ||
| R2D12-0524-R | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT 24V/-24V 0.042A/-0.042A 2W RoHS : Compliant |
| 0 | ||
| SI5332BD12084-GM3 | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 48-P RoHS : Compliant | 0 | |||
| SI5341A-D12045-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 1028MHz-OUT 64- RoHS : Compliant | 0 | |||
| SI5341D-D12051-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 64-P RoHS : Compliant | 0 | |||
| MEA1D1209SC | Murata Manufacturing Co Ltd | DCTODC CONVERTR MOD RoHS : Compliant | 0 | |||
| R0.25D12-053.3/H | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT 3.3V/-3.3V 0.038A/-0.038A RoHS : Compliant |
| 0 | ||
| R0.5D-1205/H | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 5V/-5V 0.05A/-0.05A 0.5W RoHS : Compliant |
| 0 | ||
| R0.5D12-0505/P-R | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT 5V/-5V 0.05A/-0.05A 0.5W 1 RoHS : Compliant |
| 0 | ||
| R0.5D12-0512/H-R | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT 12V/-12V 0.021A/-0.021A 0. RoHS : Compliant |
| 0 | ||
| CGD1200HB2P-XM3 | Wolfspeed | Half-Bridge Gate Driver for 1.2 kV XM3 Module RoHS : Compliant |
| 0 | ||
| NCS6D1205C | Murata Manufacturing Co Ltd | Module DC-DC 12VIN 2-OUT 5V/-5V 0.6A/-0.6A 6W 8-Pi RoHS : Compliant | 0 | |||
| R0.25D12-0512/HP-R | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT 12V/-12V 0.0104A/-0.0104A RoHS : Compliant |
| 0 | ||
 Rutronik | MCS04020D1201BE000 | Vishay Intertechnologies | TF0402 1,2K 0,1% 0,063W TK25 RoHS : Compliant |
| 50,000 | |
| MCT06030D1203BP500 | Vishay Intertechnologies | TF0603 120K 0,1% 0,1W TK25 RoHS : Compliant |
| 50,000 | ||
| MCU08050D1202BP500 | Vishay Intertechnologies | TF0805 12K 0,1% 0,125W TK25 RoHS : Compliant |
| 50,000 | ||
| MCS04020D1202BE000 | Vishay Intertechnologies | TF0402 12K 0,1% 0,063W TK25 RoHS : Compliant |
| 50,000 | ||
| MCU08050D1203BP500 | Vishay Intertechnologies | TF0805 120K 0,1% 0,125W TK25 RoHS : Compliant |
| 45,000 | ||
| MCS04020D1203BE000 | Vishay Intertechnologies | TF0402 120K 0,1% 0,063W TK25 RoHS : Compliant |
| 30,000 | ||
| MCT06030D1202BP500 | Vishay Intertechnologies | TF0603 12K 0,1% 0,1W TK25 RoHS : Compliant |
| 30,000 | ||
| SD12-01FTG | Littelfuse Inc | ESD Prot. ARRAY 450W 12V SOD323 RoHS : Compliant |
| 12,000 | ||
| RK73H2ATTD1200F | KOA Speer Electronics Inc | RC0805 120R 1% 0,25W TK100 RoHS : Compliant |
| 10,000 | ||
| RK73H2ETTD1201F | KOA Speer Electronics Inc | RC1210 1,2K 1% 0,5W TK100 RoHS : Compliant |
| 5,000 | ||
| SMD1206B016TF | YAGEO Corporation | 0.16A 30V 1206 resettable fuse RoHS : Compliant |
| 4,000 | ||
| IM66D120AXTMA1 | Infineon Technologies AG | Digital, ANC, automotive MEMS microphone RoHS : Compliant |
| 30 | ||
 Chip 1 Exchange | RK73H2ATTD1202F | KOA Speer Electronics Inc | INSTOCK RoHS : Compliant | 85,000 | ||
| RK73H2ATTD1202F | INSTOCK | 64,700 | ||||
| PESD1206Q140 | INSTOCK | 40,000 | ||||
| RK73H1JTTD1201F | INSTOCK | 14,969 | ||||
| D12001KN-S-O | INSTOCK | 13,643 | ||||
| 6171141D1205 | Amphenol FCi | INSTOCK | 6,966 | |||
| HC-49/US-SMD 12.000MHZ | JIYUE | INSTOCK | 6,900 | |||
| AM29LV017D120EC | INSTOCK | 1,007 | ||||
| IRFD120I0-CH | International Rectifier | INSTOCK | 846 | |||
| PID1204-330M | EROCO | INSTOCK | 793 | |||
| DY9755-FD120B2-001 | INSTOCK | 410 | ||||
| AM29F016D-120ED | INSTOCK | 368 | ||||
| AM29F016D-120ED | SPAN | INSTOCK | 368 | |||
| KD1208PTS1-6 | SUNON USA | INSTOCK | 288 | |||
| AM29F016D-120FC | SPN | INSTOCK | 223 | |||
 Avnet Abacus | MCT06030D1202BP500 | Vishay Intertechnologies | SMD Chip Resistor 12 kohm 01 100 mW 0603 1608 Metric Thin Film Precision - Tape and Reel (Alt: MCT06030D1202BP500) RoHS : Compliant | 220,000 | ||
| MCS04020D1200BE000 | Vishay Intertechnologies | - Tape and Reel (Alt: MCS04020D1200BE000) RoHS : Compliant | 120,000 | |||
| RK73H1JTTD1201F | KOA Speer Electronics Inc | SMD Chip Resistor 12 kohm 1 100 mW 0603 1608 Metric Thick Film Precision - Tape and Reel (Alt: RK73H1JTTD1201F) RoHS : Compliant | 100,000 | |||
| MCT06030D1200BP500 | Vishay Intertechnologies | MCT 060325 01 P5 120R - Tape and Reel (Alt: MCT06030D1200BP500) RoHS : Compliant | 50,000 | |||
| MCS04020D1201BE000 | Vishay Intertechnologies | - Tape and Reel (Alt: MCS04020D1201BE000) RoHS : Compliant | 50,000 | |||
| MCS0402MD1203BE000 | Vishay Intertechnologies | - Tape and Reel (Alt: MCS0402MD1203BE000) RoHS : Compliant | 50,000 | |||
| MCU08050D1202BP500 | Vishay Intertechnologies | - Tape and Reel (Alt: MCU08050D1202BP500) RoHS : Compliant | 45,000 | |||
| MCS04020D1203BE000 | Vishay Intertechnologies | - Tape and Reel (Alt: MCS04020D1203BE000) RoHS : Compliant | 40,000 | |||
| MCT0603MD1204BP500 | Vishay Intertechnologies | SMD Chip Resistor 12 Mohm 01 125 mW 0603 1608 Metric Thin Film - Tape and Reel (Alt: MCT0603MD1204BP500) RoHS : Compliant | 35,000 | |||
| MCT06030D1202DP500 | Vishay Intertechnologies | - Tape and Reel (Alt: MCT06030D1202DP500) RoHS : Compliant | 30,000 | |||
| RK73H2BTTD1200F | KOA Speer Electronics Inc | SMD Chip Resistor 120 ohm 1 250 mW 1206 3216 Metric Thick Film Precision - Tape and Reel (Alt: RK73H2BTTD1200F) RoHS : Compliant | 25,000 | |||
| RK73H1JTTD1203F | KOA Speer Electronics Inc | SMD Chip Resistor 120 kohm 1 100 mW 0603 1608 Metric Thick Film Precision - Tape and Reel (Alt: RK73H1JTTD1203F) RoHS : Compliant | 25,000 | |||
| ERA2AKD120X | Panasonic Electronic Components | SMD Chip Resistor 12 ohm 05 63 mW 0402 1005 Metric Metal Film Thin Film - Tape and Reel (Alt: ERA2AKD120X) RoHS : Compliant | 20,000 | |||
| SMM02040D1202BB300 | Vishay Intertechnologies | - Tape and Reel (Alt: SMM02040D1202BB300) RoHS : Compliant | 18,000 | |||
| RN73H2ATTD1202D25 | KOA Speer Electronics Inc | - Tape and Reel (Alt: RN73H2ATTD1202D25) RoHS : Compliant | 5,000 | |||
Avnet Asia | SD1206S040S2R0 | Kyocera AVX Components | Schottky Rectifier, 40 V, 2 A, Single, SOD-123, 2 Pins, 500 mV (Alt: SD1206S040S2R0) RoHS : Compliant | 9,000 | ||
| GSB31D12021HHR | Amphenol Corporation | Conn USB Type A RCP 9 POS 2mm RA Through Hole 1 Port Tray (Alt: GSB31D12021HHR) RoHS : Compliant |
| 100 | ||
| AMA150D-120125GY(CM) | Aimtec | ATKAMA150D-120125GY(CM) BRAND-NEW AC/DC (Alt: AMA150D-120125GY(CM)) RoHS : Compliant | 0 | |||
| VJ0805D120JXPAJ | Vishay Intertechnologies | (Alt: VJ0805D120JXPAJ) RoHS : Compliant | 0 | |||
| NCS6D1205C | Murata Manufacturing Co Ltd | (Alt: NCS6D1205C) RoHS : Compliant | 0 | |||
| SG73P2BTTD120J | KOA Speer Electronics Inc | (Alt: SG73P2BTTD120J) RoHS : Compliant | 0 | |||
| MMA02040D1203DB000 | Vishay Intertechnologies | (Alt: MMA02040D1203DB000) RoHS : Compliant | 0 | |||
| MMBD1204 | onsemi | Small Signal Diode, Dual Common Cathode, 100 V, 200 mA, 1.1 V, 4 ns, 2 A (Alt: MMBD1204) RoHS : Compliant | 0 | |||
| KW DCLMS2.EC-CXCZ-4A7D-1-20-R18 | ams OSRAM Group | OOSKW DCLMS2.EC-CXCZ-4A7D-1-20-R18 Q6511 (Alt: KW DCLMS2.EC-CXCZ-4A7D-1-20-R18) RoHS : Compliant | 0 | |||
| ILD1207T | Vishay Intertechnologies | (Alt: ILD1207T) RoHS : Compliant |
| 0 | ||
| SMM02040D1202BB300 | Vishay Intertechnologies | (Alt: SMM02040D1202BB300) RoHS : Compliant | 0 | |||
| RK73H2ATTD1201F | KOA Speer Electronics Inc | (Alt: RK73H2ATTD1201F) RoHS : Compliant | 0 | |||
| RK73H2BTTD1202F | KOA Speer Electronics Inc | Res Precision Thick Film 1206 12k Ohm 1% 1/4W ?100ppm/?C Molded Paper T/R (Alt: RK73H2BTTD1202F) RoHS : Compliant | 0 | |||
| VJ0402D120GXAAC | Vishay Intertechnologies | (Alt: VJ0402D120GXAAC) RoHS : Compliant | 0 | |||
| RK73H1JTTD1203F | KOA Speer Electronics Inc | Res Precision Thick Film 0603 120k Ohm 1% 1/10W ?100ppm/?C Molded Paper T/R (Alt: RK73H1JTTD1203F) RoHS : Compliant | 0 | |||
 Avnet Silica | LED1202JR | STMicroelectronics | LED Driver 12 Outputs 26V to 5V in 5V240mA out WLCSP20 (Alt: LED1202JR) RoHS : Compliant | 36,000 | ||
| BUK6D120-60PX | Nexperia | Power MOSFET P Channel 60 V 8 A 0095 ohm SOT1220 Surface Mount (Alt: BUK6D120-60PX) RoHS : Compliant | 12,000 | |||
| LED1202QTR | STMicroelectronics | LED Driver DCDC Isolated 26 V to 5 V 240 mA 5 V 400 kHz 20 Pins QFN (Alt: LED1202QTR) RoHS : Compliant | 8,000 | |||
| MMBD1204 | onsemi | Small Signal Diode Dual Common Cathode 100 V 200 mA 11 V 4 ns 2 A (Alt: MMBD1204) RoHS : Compliant | 6,000 | |||
| STD120N4F6 | STMicroelectronics | (Alt: STD120N4F6) RoHS : Compliant | 2,500 | |||
| DGTD120T25S1PT | Diodes Incorporated | Trans IGBT Chip NCH 12KV 50A 3Pin TO247 ThruHole Tube (Alt: DGTD120T25S1PT) RoHS : Compliant | 450 | |||
| UJ3D1202Z | onsemi | 1200V2A SiC SCHOTTKY DIODE G3 DICED ON TAPE (Alt: UJ3D1202Z) RoHS : Compliant | 0 | |||
| UJ3D1205TS | onsemi | Silicon Carbide SiC Diode EliteSiC TO2202L 5A 1200V SiC Merged PiNSchottky MPS Diode (Alt: UJ3D1205TS) RoHS : Compliant | 0 | |||
| STD120N4LF6 | STMicroelectronics | (Alt: STD120N4LF6) RoHS : Compliant | 0 | |||
| APT30D120BG | Microchip Technology Inc | (Alt: APT30D120BG) RoHS : Compliant | 0 | |||
| BYR5D-1200PJ | WeEn Semiconductor Co Ltd | Diode Ultra Fast Power Diode 1200V 5A 3Pin TO252N (Alt: BYR5D-1200PJ) RoHS : Compliant | 0 | |||
| APT30SCD120S | Microchip Technology Inc | Diode SiC Schottky 99A 3Pin D3PAK (Alt: APT30SCD120S) RoHS : Compliant | 0 | |||
| FDD120AN15A0 | onsemi | NChannel PowerTrench MOSFET 150V 14A 120m (Alt: FDD120AN15A0) RoHS : Compliant | 0 | |||
| BUK6D120-40EX | Nexperia | (Alt: BUK6D120-40EX) RoHS : Compliant | 0 | |||
| BUK6D120-60PZ | Nexperia | (Alt: BUK6D120-60PZ) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AM2D-1205SH40Z | Aimtec | RoHS : Compliant |
| 0 | |
| AM1D-1207SH52Z | Aimtec | RoHS : Compliant |
| 0 | ||
| AM1D-1209DH30-RZ | Aimtec | RoHS : Compliant |
| 0 | ||
| AM2D-1203DH52Z | Aimtec | RoHS : Compliant |
| 0 | ||
| AM1D-120505DZ | Aimtec | RoHS : Compliant |
| 0 | ||
| AM1D-1205DH30Z | Aimtec | RoHS : Compliant |
| 0 | ||
| AM1D-1207SH60Z | Aimtec | RoHS : Compliant |
| 0 | ||
| AM1D-1209D-RZ | Aimtec | RoHS : Compliant |
| 0 | ||
| AM2D-1203DH60Z | Aimtec | RoHS : Compliant |
| 0 | ||
| AM2D-1207DZ | Aimtec | RoHS : Compliant |
| 0 | ||
| AM1D-1205SH40Z | Aimtec | RoHS : Compliant |
| 0 | ||
AM2D-1209DH30-RZ | Aimtec | RoHS : Compliant |
| 0 | ||
| HPA65D-120-P01K002 | Sinpro Electronics Co Inc | DC cable: 4 ft DC plug: 5.5 x 2.1 x 11mm barrel plug 3 years warranty |
| 0 | ||
| AMED120-48SGY | Aimtec | RoHS : Compliant |
| 0 | ||
| AM1D-1203DH30Z | Aimtec | RoHS : Compliant |
| 0 | ||
 Chip-Germany GmbH | FDD120AN15A0 | Fairchild Semiconductor Corporation | RoHS : Compliant | 17 | ||
 Component Electronics, Inc | RK73H2ALTD1202F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3,695 | |
| CD15CD120DO3 | Knowles CDE | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 683 | ||
| MMBD1204 | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 589 | ||
| FOXSD/120-20 | Fox Electronics | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 200 | ||
| MTSW-110-07-T-D-120-RA | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 150 | ||
| FOXSD/120R-20/TR | Fox Electronics | IN STOCK SHIP TODAY |
| 143 | ||
| IRFD120 | INTENATIONAL | IN STOCK SHIP TODAY | 78 | |||
| ZB4PD1-2000+ | Mini-Circuits | IN STOCK SHIP TODAY RoHS : Compliant |
| 28 | ||
| MTMM-130-14-S-D-120 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 23 | ||
| 3VH49/9JND12(083) | IN STOCK SHIP TODAY | 18 | ||||
| MTMM-122-11-G-D-120 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 12 | ||
| IPD1-20-D | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 9 | ||
| D15D1205 | ACON Inc | IN STOCK SHIP TODAY | 2 | |||
| CD-1206 | CUI Inc | IN STOCK SHIP TODAY |
| 2 | ||
| KD1204PKS2-GN | SUNON USA | IN STOCK SHIP TODAY |
| 2 | ||
 DB Roberts | 9D12-02 | Tech-Etch | D-CONNECTOR EACH, C&B | 1,313 | ||
| 25D12-02 | Tech-Etch | D-CONNECTOR EACH, C&B | 1,064 | |||
| 15D12-02 | Tech-Etch | D-CONNECTOR EACH, C&B | 235 | |||
| D12003-012-4 | Tinnerman Fasteners | SPEED NUT PUSH ON TY |
| 166 | ||
| HES3D-120-TMP | Sugatsune Kogyo Co Ltd | PLASTIC JIG TEMPLATE FOR HES3D | 0 | |||
| HES3D-120DC | Sugatsune Kogyo Co Ltd | 0 | ||||
| HH-UD120SH | Sugatsune Kogyo Co Ltd | RECESSED PULL | 0 | |||
| HES3D-120DN-CO | Sugatsune Kogyo Co Ltd | HES3D-120DN-COVER | 0 | |||
| HES3D-120BL | Sugatsune Kogyo Co Ltd | 0 | ||||
| HES3D-120BL-CO | Sugatsune Kogyo Co Ltd | HES3D-120BL-COVER | 0 | |||
| 0BD12-04810 | Avdel | RIVETTO ALLUMINIOACC TL 4.8 X | 0 | |||
| HES3D-120BKT-F | Sugatsune Kogyo Co Ltd | 0 | ||||
| HH-UD120SM | Sugatsune Kogyo Co Ltd | RECESSED PULL | 0 | |||
| HES3D-120BKT-D | Sugatsune Kogyo Co Ltd | 0 | ||||
| HES3D-120DC-CO | Sugatsune Kogyo Co Ltd | HES3D-120DC-COVER | 0 | |||
 EBV Elektronik | MMBD1203 | onsemi | Small Signal Diode Dual Series 100 V 200 mA 11 V 4 ns 2 A (Alt: MMBD1203) RoHS : Compliant | 18,000 | ||
| ILD1207T | Vishay Intertechnologies | (Alt: ILD1207T) RoHS : Compliant | 14,000 | |||
| LYT66F-ABBB-4D-1-20-R33-Z-XX | ams OSRAM Group | LED Single Chip Yellow 590nm 50mA 2Pin PLCC TR (Alt: Q65111A2950) RoHS : Compliant | 4,000 | |||
| MMBD1204 | onsemi | Small Signal Diode Dual Common Cathode 100 V 200 mA 11 V 4 ns 2 A (Alt: MMBD1204) RoHS : Compliant | 3,000 | |||
| KWDCLMS2.EC-CXCZ-4A7D-1-20-R18 | ams OSRAM Group | LED Chip White 8000K 20mA 2Pin SMD TR (Alt: Q65113A1686) RoHS : Compliant | 3,000 | |||
| V60D120C-M3/I | Vishay Intertechnologies | 60A120VTRENCH SKY RECT (Alt: V60D120C-M3/I) RoHS : Compliant | 2,000 | |||
| TCD1209DG(8Z,K) | Toshiba America Electronic Components | Image Sensor BW CCD 2048Pixels 22Pin CDIP (Alt: TCD1209DG(8Z,K)) RoHS : Compliant | 50 | |||
| ILD1206T | Vishay Intertechnologies | (Alt: ILD1206T) RoHS : Compliant | 0 | |||
| LED1202QTR | STMicroelectronics | LED Driver DCDC Isolated 26 V to 5 V 240 mA 5 V 400 kHz 20 Pins QFN (Alt: LED1202QTR) RoHS : Compliant | 0 | |||
| STD120N4LF6 | STMicroelectronics | (Alt: STD120N4LF6) RoHS : Compliant | 0 | |||
| APT30D120BG | Microchip Technology Inc | (Alt: APT30D120BG) RoHS : Compliant | 0 | |||
| DD1200S17H4_B2 | Infineon Technologies AG | IGBT Module 1700V 1200A 4pin IHMB1301 (Alt: SP000790664) RoHS : Compliant | 0 | |||
| TD120N16SOFHPSA1 | Infineon Technologies AG | (Alt: SP001272854) RoHS : Compliant | 0 | |||
| SIDC42D120H8X1SA3 | Infineon Technologies AG | (Alt: SP000491790) RoHS : Compliant | 0 | |||
| SIDC81D120H8X1SA2 | Infineon Technologies AG | (Alt: SP000491810) RoHS : Compliant | 0 | |||
 FDH Electronics | M123A16BPD120KC | Arrow Electronics | Other Products | 4 | ||
| 550T006M1F0D1-20 | Glenair Inc | Connector RoHS : Compliant |
| 0 | ||
| 550T006M2F0D1-20 | Glenair Inc | Connector RoHS : Compliant |
| 0 | ||
| 550T006NF1F0D1-20 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| 2CPZ-LED120 | Honeywell Sensing and Control | Switches |
| 0 | ||
 Flip Electronics | MMBD1201 | onsemi | Stock, Ship Today RoHS : Compliant |
| 39,000 | |
| MMBD1203 | onsemi | Stock, Ship Today RoHS : Compliant |
| 32,580 | ||
| FDD120AN15A0 | onsemi | Stock RoHS : Compliant | 10,000 | |||
| SIDC81D120H8X1SA2 | Infineon Technologies AG | Stock RoHS : Compliant | 1,300 | |||
| PD1201 | Littelfuse Inc | Stock RoHS : Compliant | 975 | |||
| MMBD1204 | onsemi | Stock, Ship Today RoHS : Compliant |
| 105 | ||
 Maritex | MMBD1204 | onsemi | Rectifier Diodes & Bridges; MMBD1204; ON SEMICONDUCTOR; 3; 200 mA; 100 V; 50 nA RoHS : Compliant |
| 146,566 | |
| TACTD120H43B260-JL | Jialong | Tact Switch; SMD; dimensions 12.0x12.0; h=4.3mm; vertical; operating force 260gf; button: round |
| 2,189 | ||
| TACTD120H43B180-CT | CONNTHERM | Tact Switch; SMD; dimensions 12.0x12.0; h=4.3mm; vertical; operating force 180gf; button: round |
| 1,515 | ||
| TACTD120H80B260-JL | Jialong | Tact Siwtch, SMD, dimensions 12.0x12.0, h=8.0mm; straight; operating force 260gf; ivory puch |
| 977 | ||
| TACTD120H85B260-JL | Jialong | Tact Switch; SMD; dimensions 12.0x12.0; h=8.5mm; vertical; operating force 260gf; button: round |
| 971 | ||
| TACTD120H43B520-CT | CONNTHERM | Tact Switch; SMD; dimensions 12.0x12.0; h=4.3mm; vertical; operating force 520gf; button: round |
| 752 | ||
| CLED1201 | LEDCONN | LED connectors; Number of contacts: 1; cable: 22-26 AWG; load capacity 2A; voltage 250V |
| 94 | ||
| NLDD-1200HW | Mean Well | Converter DC/DC; LED; 55.2W; 6-46VDC; 10-56VDC; 1200mA RoHS : Compliant |
| 30 | ||
| D12025V24H-K | Activa Inc | Fan; DC; 24VDC; 120x120x25mm; 2.42m3/min; 36.0dB. |
| 30 | ||
| LAD-120C | Mean Well | Buffer Power Supply; module; 120.35W; 41.5V; 1.9A; 41.5V; 1A; 90-264VAC; 127-370VDC |
| 23 | ||
| D12038V24SLB-K | Activa Inc | Fan; DC; 24VDC; 120x120x38mm; 5.05m3/min; 54.0dB. |
| 19 | ||
| LAD-120B | Mean Well | Buffer Power Supply; module; 121.4W; 27.6V; 3.4A; 27.6V; 1A; 90-264VAC; 127-370VDC |
| 2 | ||
| LAD-120D | Mean Well | Buffer Power Supply; module; 121.99W; 55.2V; 1.21A; 55.2V; 1A; 90-264VAC; 127-370VDC |
| 1 | ||
| D12038V24SSSHBD(A)-TK | Activa Inc | Fan; DC; 24VDC; 120x120x3mm; 11000RPM. |
| 1 | ||
| TACTD120H43I160E | Innocent Electronics Co Ltd | Tact Switch; SMD; dimensions 12.0x12.0; h=4.3mm; vertical; operating force 160gf; button: round |
| 1 | ||
 Pasternack Enterprises US | PE3C8741/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-RD, RF Cable Type: Belden 4694R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 12G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8741/RD-120, can also be known as a 12G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8741/RD-120 is built with belden 4694R-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax. |
| 190 | |
| PE3C8743/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-RD, RF Cable Type: Belden 4694R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8743/RD-120, can also be known as a 12G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8743/RD-120 is built with belden 4694R-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8743/RD-120 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax. |
| 190 | ||
| PE99W000/RD-120 | Pasternack Enterprises |
| 95 | |||
| PE99W005/RD-120 | Pasternack Enterprises | 95 | ||||
| PE3C8874/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-RD, RF Cable Type: Belden 1855A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/RD-120, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/RD-120 is built with Belden 1855A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/RD-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-RD coax. |
| 89 | ||
| PE3C8748/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-RD, RF Cable Type: Belden 4855R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4855R-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/RD-120, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/RD-120 is built with belden 4855R-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/RD-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-RD coax. |
| 89 | ||
| PE3C8813/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8813/RD-120, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8813/RD-120 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax. |
| 52 | ||
| PE3C8818/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/RD-120, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/RD-120 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax. |
| 52 | ||
| PE3C8873/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-RD, RF Cable Type: Belden 1855A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/RD-120, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/RD-120 is built with Belden 1855A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-RD coax. |
| 44 | ||
| PE3C8747/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-RD, RF Cable Type: Belden 4855R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4855R-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4855R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4855R-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8747/RD-120, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8747/RD-120 is built with belden 4855R-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4855R-RD coax. |
| 44 | ||
| PE3C8817/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8817/RD-120, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8817/RD-120 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8817/RD-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax. |
| 0 | ||
| PE3C8744/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-RD, RF Cable Type: Belden 4694R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/RD-120, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/RD-120 is built with belden 4694R-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax. |
| 0 | ||
| PE88D12000 | Pasternack Enterprises |
| 0 | |||
| PE3C8816/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/RD-120, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/RD-120 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax. |
| 0 | ||
| PE3C8745/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-RD, RF Cable Type: Belden 4694R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/RD-120, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/RD-120 is built with belden 4694R-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/RD-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax. |
| 0 | ||
 Relay Specialties | HD-120-04PH-S | BlockMaster Blocks | Barrier Terminal Block; 4-pos 0.374"; Base; Black |
| 500 | |
| MSD12004 | BlockMaster Blocks | PCB Terminal Block; 12-pos 2.54mm; PCB Mount; 10A; 150V 30-16AWG; NonStack; Green |
| 356 | ||
| 92S7A22D-120 | Schneider Electric Relays | Power Relay; 2A DPST-NO; 30 A 120VAC Chassis Mount, DIN Rail |
| 87 | ||
| 92S11A22D-120 | Schneider Electric Relays | Power Relay; 2C DPDT; 30 A 120VAC Chassis Mount, DIN Rail |
| 29 | ||
| 261-D-120 | Time Mark Corporation | Alternating Relay; Duplex 2C DPDT; 120V AC/DC 10 A at 120 V AC resistive |
| 8 | ||
 TE Connectivity | SGD-120-3 | TE Connectivity | STRING POT, 120 INCH RANGE Position Sensor Product Type: SG Series String Pots Full Stroke Range: 3048 mm Full Stroke Range: 120 in Output Signal Details: 4 – 20 mA 0 – 10 VDC Accuracy: ±.35 '% des Endwerts SG Series String Pots 3048 mm 120" 4 – 20 mA | 4 – 20Ma Compact Mid-Range String Pot | Sgd Series | Part Number: SGD-120-3 | Internal Number: SGD-120-3 | TE Connectivity RoHS : Compliant |
| 17 | |
 Vyrian | BSM35GD120DLCE3224BOSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 70A I(C), 1200V V(BR)CES, N-Channel | 10,140 | ||
| LSIC2SD120C10 | Littelfuse Inc | Rectifier Diode, Schottky, 1 Phase, 1 Element, 33A, 1200V V(RRM), Silicon Carbide, TO-252 RoHS : Compliant | 9,490 | |||
| BSM50GD120DN2BOSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 72A I(C), 1200V V(BR)CES, N-Channel | 9,255 | |||
| M29R800D-120N1 | STMicroelectronics | RoHS : Not Compliant | 9,040 | |||
| ELC11D120F | Panasonic Electronic Components | General Purpose Inductor, 12uH, 20%, 1 Element, Ferrite-Core RoHS : Compliant | 8,340 | |||
| XLP416ZGD1200-22 | Broadcom Limited | 8,111 | ||||
| LMK1D1208IEVM | Texas Instruments | 6,734 | ||||
| BSM35GD120DN2E3224BOSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 50A I(C), 1200V V(BR)CES, N-Channel | 6,335 | |||
| BSM15GD120DLCE3224BOSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 35A I(C), 1200V V(BR)CES, N-Channel | 6,241 | |||
| RD120007N | Texas Instruments | 5,946 | ||||
| SIDC08D120H8X1SA1 | Infineon Technologies AG | Rectifier Diode, 1 Phase, 1 Element, 150A, 1200V V(RRM), Silicon RoHS : Compliant | 5,787 | |||
| RD120008N | Texas Instruments | 5,243 | ||||
| M29R008D-120N1TR | STMicroelectronics | 3,635 | ||||
| NCS6D1205C | Murata Manufacturing | DC-DC Regulated Power Supply Module | 732 | |||
| DD1200S17H4_B2 | Infineon Technologies AG | Rectifier Diode, 1 Phase, 2 Element, 1200A, 1700V V(RRM), Silicon RoHS : Compliant | 674 | |||
 Waytek, Inc. | AT06-2S-LED1201 | Amphenol Sine Systems | LED 2 Pin Connector Plug AT 12V Clear End Cap DT06-2S LED NEED PN 38370 |
| 116 | |
 Win Source Electronics | MMBD1204 | Fairchild Semiconductor Corporation | DIODE ARRAY GP 100V 200MA SOT23 RoHS : Compliant |
| 150,000 | |
| SMD1206P050TF | Littelfuse Inc | FUSE RESETTABLE 500MA 6V 1206 |
| 134,000 | ||
CDCLVD1208RHDR | Texas Instruments | IC CLK BUFFER 2:8 800MHZ 28VQFN RoHS : Compliant |
| 36,420 | ||
| SMD1206P005TF | Shenzhen Ruilongyuan Electronics | Polymeric PTC Resettable Fuse 60V 50mA Surface Mount 1206 |
| 34,000 | ||
| SMD1200PL-TP | Micro Commercial Components | DIODE SCHOTTKY 200V 1A SOD123FL RoHS : Compliant |
| 22,500 | ||
| BUK6D120-40EX | Nexperia | MOSFET N-CH 40V 2.9A/5.7A 6DFN / N-Channel 40 V 2.9A (Ta), 5.7A (Tc) 2W (Ta), 7.5W (Tc) Surface Mount DFN2020MD-6 RoHS : Compliant |
| 18,460 | ||
| SD12-01FTG | Littelfuse Inc | TVS DIODE 12VWM 22.5VC SOD323 RoHS : Compliant |
| 18,000 | ||
| IM69D120V01XTSA1 | Infineon Technologies AG | MIC MEMS DIGITAL PDM OMNI -26DB RoHS : Compliant |
| 12,536 | ||
| IM69D120V01 | Infineon Technologies AG | Omnidirectional -26dB SMD-5P,4x3mm Microphones RoHS |
| 12,516 | ||
| LMK1D1204RGTR | Texas Instruments | 4-CHANNEL OUTPUT LVDS 1.8-V BUFF / Clock Clock Buffer IC 2:4 2 GHz 16-VFQFN Exposed Pad RoHS : Compliant |
| 11,687 | ||
| TCD1209DG | Toshiba America Electronic Components | Image Sensor CCD 2048Pixels 22-Pin WDIP RoHS : Compliant |
| 9,880 | ||
| LMK1D1204RGT | Texas Instruments | 1:4 Low-Jitter Clock Buffer |
| 4,568 | ||
| IRFD120 | Vishay Huntington | 1.3A, 100V, 0.300 Ohm, N-Channel Power MOSFET | MOSFET N-CH 100V 1.3A 4-DIP |
| 1,200 | ||
APT60D120B | Microsemi Corporation (now Microchip) | DIODE GEN PURP 1.2KV 60A TO247 RoHS : Not Compliant |
| 500 | ||
| APT30D120BG | Microsemi Corporation (now Microchip) | DIODE GEN PURP 1.2KV 30A TO247 RoHS : Compliant |
| 338 | ||
 Wuhan P&S | SIDC42D120H8 | Infineon Technologies AG | 1200V,75A,Fast Switching Diode RoHS : Compliant |
| 3,789 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Mexican ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
British
New Zealand