 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
E16XQA-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
 PUI | P6KE160A-G | 3,000 | ||||
 Pasternack Enterprises US | PE1603 | Pasternack Enterprises | Key Specifications, RF Port Connector Series: SMA, DC Port Connector Series: Solder Pin, Minimum Frequency: 1 GHz, Maximum Frequency: 5 GHz, RF Port Maximum VSWR: 1.5:1, Maximum Voltage: 50 Volts, Maximum DC Current: 1,000 mA. 1 GHz to 5 GHz SMA Bias Tee Rated to 1000 mA and 50 Volts DC. PE1603 bias tee (also called bias T) has an SMA connector RF port that is female gender. This Pasternack female SMA bias tee design is rated for a minimum frequency of 1 GHz and a maximum frequency of 5 GHz. Our RF coaxial bias tee has a solder pin DC port connector with a female gender. This SMA bias tee / T is rated for a max. DC voltage of 50 Volts and a max. current of 1,000 mA. The PE1603 bias T with SMA connector series for RF port is designed with a maximum VSWR of 1.5:1 and a RF to bias isolation typical of 25 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial SMA bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. |
| 40 | |
| PE1618 | Pasternack Enterprises | Key Specifications, RF Port Connector Series: N, DC Port Connector Series: Solder Pin, Minimum Frequency: 250 MHz, Maximum Frequency: 2.5 GHz, RF Port Maximum VSWR: 1.4:1, Maximum Voltage: 100 Volts, Maximum DC Current: 7,000 mA. 250 MHz to 2.5 GHz N Bias Tee Rated to 7000 mA and 100 Volts DC. PE1618 bias tee (also called bias T) has an type N connector RF port that is female gender. This Pasternack female type N bias tee design is rated for a minimum frequency of 250 MHz and a maximum frequency of 2.5 GHz. Our RF coaxial bias tee has a solder pin DC port connector with a female gender. This N type bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 7,000 mA. The PE1618 bias T with type N connector series for RF port is designed with a maximum VSWR of 1.4:1 and a RF to bias isolation typical of 20 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial type N bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. |
| 20 | ||
| PE1610 | Pasternack Enterprises | Key Specifications, RF Port Connector Series: 2.4mm, DC Port Connector Series: SMA, Minimum Frequency: 0.05 MHz, Maximum Frequency: 50 GHz, RF Port Maximum VSWR: 1.8:1, Maximum Voltage: 25 Volts, Maximum DC Current: 150 mA. 50 kHz to 50 GHz 2.4mm Bias Tee Rated to 150 mA and 25 Volts DC. PE1610 bias tee (also called bias T) has an 2.4mm connector RF port that is female gender. This Pasternack female 2.4mm bias tee design is rated for a minimum frequency of 0.05 MHz and a maximum frequency of 50 GHz. Our RF coaxial bias tee has a sma DC port connector with a female gender. This 2.4mm bias tee / T is rated for a max. DC voltage of 25 Volts and a max. current of 150 mA. The PE1610 bias T with 2.4mm connector series for RF port is designed with a maximum VSWR of 1.8:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 2.4mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. |
| 9 | ||
| PE1642 | Pasternack Enterprises | Key Specifications, RF Port Connector Series: 2.92mm, DC Port Connector Series: BNC, Minimum Frequency: 0.012 MHz, Maximum Frequency: 40 GHz, RF Port Maximum VSWR: 2.5:1, Maximum Voltage: 16 Volts, Maximum DC Current: 150 mA. 12 KHz to 40 GHz, 2.92mm Broadband Bias Tee, Male Input, Rated to 150 mA nad 16 Volts, DC BNC Connector. PE1642 bias tee (also called bias T) has a 2.92mm connector RF port that is male gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack male 2.92mm bias tee design is rated for a minimum frequency of 0.012 MHz and a maximum frequency of 40 GHz. Our RF coaxial bias tee has a 2.92mm DC port connector with a male gender. This 2.92mm bias tee / T is rated for a max. DC voltage of 16 Volts and a max. current of 150 mA. The PE1642 bias T with 2.92mm connector series for RF port is designed with a maximum VSWR of 2.5:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 2.92mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1642 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1642 broadband bias tee from Pasternack operates at temperature ranging from 15°C to 30°C. Our 2.92mm high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1642 2.92mm bias tee has typical and maximum insertion loss of 1.2 dB and 3 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with 2.92mm RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement. |
| 8 | ||
| PE1639 | Pasternack Enterprises | Key Specifications, RF Port Connector Series: SMA, DC Port Connector Series: SMA, Minimum Frequency: 0.05 MHz, Maximum Frequency: 26 GHz, RF Port Maximum VSWR: 1.8:1, Maximum Voltage: 25 Volts, Maximum DC Current: 750 mA. 50 KHz to 26 GHz SMA Broadband Bias Tee, Male Input, Rated to 750 MHz and 25 Volts, DC SMA Connector. PE1639 bias tee (also called bias T) has a SMA connector RF port that is male gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack male SMA bias tee design is rated for a minimum frequency of 0.05 MHz and a maximum frequency of 26 GHz. Our RF coaxial bias tee has a SMA DC port connector with a male gender. This SMA bias tee / T is rated for a max. DC voltage of 25 Volts and a max. current of 750 mA. The PE1639 bias T with SMA connector series for RF port is designed with a maximum VSWR of 1.8:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial SMA bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1639 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1639 broadband bias tee from Pasternack operates at temperature ranging from 15°C to 30°C. Our SMA high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1639 SMA bias tee has typical and maximum insertion loss of 1.4 dB and 3 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with SMA RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement. |
| 7 | ||
| PE1637 | Pasternack Enterprises | Key Specifications, RF Port Connector Series: SMA, DC Port Connector Series: BNC, Minimum Frequency: 0.05 MHz, Maximum Frequency: 26 GHz, RF Port Maximum VSWR: 1.8:1, Maximum Voltage: 25 Volts, Maximum DC Current: 750 mA. 50 KHz to 26 GHz SMA Broadband Bias Tee, Rated to 750 mA and 25 Volts, DC BNC Connector. PE1637 bias tee (also called bias T) has a SMA connector RF port that is female gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack female SMA bias tee design is rated for a minimum frequency of 0.05 MHz and a maximum frequency of 26 GHz. Our RF coaxial bias tee has a SMA DC port connector with a female gender. This SMA bias tee / T is rated for a max. DC voltage of 25 Volts and a max. current of 750 mA. The PE1637 bias T with SMA connector series for RF port is designed with a maximum VSWR of 1.8:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial SMA bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1637 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1637 broadband bias tee from Pasternack operates at temperature ranging from 15°C to 30°C. Our SMA high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1637 SMA bias tee has typical and maximum insertion loss of 1.4 dB and 3 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with SMA RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement. |
| 6 | ||
| PE1623 | Pasternack Enterprises | Key Specifications, RF Port Connector Series: N, DC Port Connector Series: SMA, Minimum Frequency: 10 MHz, Maximum Frequency: 2.5 GHz, RF Port Maximum VSWR: 1.5:1, Maximum Voltage: 100 Volts, Maximum DC Current: 2,500 mA. 10 MHz to 2.5 GHz N Broadband Bias Tee, Male Output, Rated to 2.5 Amps and 100 Volts, DC SMA connector. PE1623 bias tee (also called bias T) has a type N connector RF port that is female gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack female type N bias tee design is rated for a minimum frequency of 10 MHz and a maximum frequency of 2.5 GHz. Our RF coaxial bias tee has a type N DC port connector with a female gender. This N type bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 2,500 mA. The PE1623 bias T with type N connector series for RF port is designed with a maximum VSWR of 1.5:1 and a RF to bias isolation typical of 40 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial type N bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1623 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1623 broadband bias tee from Pasternack operates at temperature ranging from -55°C to 105°C. Our type N high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1623 type N bias tee has typical and maximum insertion loss of 0.3 dB and 1 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with type N RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement. |
| 5 | ||
| PE1622 | Pasternack Enterprises | Key Specifications, RF Port Connector Series: 2.92mm, DC Port Connector Series: Pin, Minimum Frequency: 500 MHz, Maximum Frequency: 40 GHz, RF Port Maximum VSWR: 2:1, Maximum Voltage: 50 Volts, Maximum DC Current: 1,000 mA. 500 MHz to 40 GHz 2.92mm Bias Tee Rated to 1000 mA and 50 Volts DC. PE1622 bias tee (also called bias T) has an 2.92mm connector RF port that is female gender. This Pasternack female 2.92mm bias tee design is rated for a minimum frequency of 500 MHz and a maximum frequency of 40 GHz. Our RF coaxial bias tee has a pin DC port connector with a female gender. This 2.92mm bias tee / T is rated for a max. DC voltage of 50 Volts and a max. current of 1,000 mA. The PE1622 bias T with 2.92mm connector series for RF port is designed with a maximum VSWR of 2:1. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 2.92mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. |
| 5 | ||
| PE1651 | Pasternack Enterprises | Key Specifications, RF Port Connector Series: F, DC Port Connector Series: DC, Minimum Frequency: 10 MHz, Maximum Frequency: 3 GHz, RF Port Maximum VSWR: 1.8:1, Maximum Voltage: 100 Volts, Maximum DC Current: 2,500 mA. 10 MHz to 3 GHz, Type F 75 Ohm Bias Tee, Rated 2.5 Amps and 100 Volts, DC Pin. PE1651 bias tee (also called bias T) has a type F connector RF port that is female gender. This broadband bias tee is available with 75 Ohm RF/DC port connector impedance. This Pasternack female type F bias tee design is rated for a minimum frequency of 10 MHz and a maximum frequency of 3 GHz. Our RF coaxial bias tee has a type F DC port connector with a female gender. This type F bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 2,500 mA. The PE1651 bias T with F type connector series for RF port is designed with a maximum VSWR of 1.8:1 and a RF to bias isolation typical of 40 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial type F bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1651 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1651 broadband bias tee from Pasternack operates at temperature ranging from -55°C to 105°C. Our type F high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1651 type F bias tee has typical and maximum insertion loss of 0.5 dB and 3 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with type F RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement. |
| 3 | ||
| PE1647 | Pasternack Enterprises | Key Specifications, RF Port Connector Series: F, DC Port Connector Series: BNC, Minimum Frequency: 10 MHz, Maximum Frequency: 3 GHz, RF Port Maximum VSWR: 1.8:1, Maximum Voltage: 100 Volts, Maximum DC Current: 2,500 mA. 10 MHz to 3 GHz, Type F 75 Ohm Bias Tee, Rated 2.5 Amps and 100 Volts, DC BNC Connector. PE1647 bias tee (also called bias T) has a type F connector RF port that is male gender. This broadband bias tee is available with 75 Ohm RF/DC port connector impedance. This Pasternack male type F bias tee design is rated for a minimum frequency of 10 MHz and a maximum frequency of 3 GHz. Our RF coaxial bias tee has a type F DC port connector with a male gender. This type F bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 2,500 mA. The PE1647 bias T with type F connector series for RF port is designed with a maximum VSWR of 1.8:1 and a RF to bias isolation typical of 45 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial F type bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1647 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1647 broadband bias tee from Pasternack operates at temperature ranging from -55°C to 105°C. Our F type high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1647 F type bias tee has typical and maximum insertion loss of 1 dB and 3 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with type F RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement. |
| 2 | ||
| PE1659 | Pasternack Enterprises | Key Specifications, RF Port Connector Series: 1.0mm, DC Port Connector Series: SMC, Minimum Frequency: 100 MHz, Maximum Frequency: 110 GHz, Maximum Voltage: 16 Volts, Maximum DC Current: 0.4 Amps. 100 MHz to 110 GHz Ultra-Wide Band Bias Tee 1.0mm(f) input, 1.0mm(m) output, SMC(m) bias Rated to 0.4 Amps and 16 Volts DC. PE1659 bias tee (also called bias T) has an 1.0mm connector RF port that is female gender. This Pasternack female 1.0mm bias tee design is rated for a minimum frequency of 100 MHz and a maximum frequency of 110 GHz. Our RF coaxial bias tee has a smc DC port connector with a female gender. This 1.0mm bias tee / T is rated for a max. DC voltage of 16 Volts and a max. current of 0.4 Amps. The PE1659 bias T with 1.0mm connector series for RF port is designed with a maximum VSWR of. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 1.0mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. |
| 1 | ||
| PE1640 | Pasternack Enterprises | Key Specifications, RF Port Connector Series: 2.92mm, DC Port Connector Series: SMA, Minimum Frequency: 0.012 MHz, Maximum Frequency: 40 GHz, RF Port Maximum VSWR: 2.5:1, Maximum Voltage: 16 Volts, Maximum DC Current: 150 mA. 12 KHz to 40 GHz 2.92mm Broadband Bias Tee, Male Input, Rated to 150 mA and 16 Volts, DC SMA Connector. PE1640 bias tee (also called bias T) has a 2.92mm connector RF port that is male gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack male 2.92mm bias tee design is rated for a minimum frequency of 0.012 MHz and a maximum frequency of 40 GHz. Our RF coaxial bias tee has a 2.92mm DC port connector with a male gender. This 2.92mm bias tee / T is rated for a max. DC voltage of 16 Volts and a max. current of 150 mA. The PE1640 bias T with 2.92mm connector series for RF port is designed with a maximum VSWR of 2.5:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 2.92mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1640 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1640 broadband bias tee from Pasternack operates at temperature ranging from 15°C to 30°C. Our 2.92mm high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1640 2.92mm bias tee has typical and maximum insertion loss of 1.5 dB and 3 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with 2.92mm RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement. |
| 1 | ||
| PE1619 | Pasternack Enterprises | Key Specifications, RF Port Connector Series: 1.85mm, DC Port Connector Series: SMA, Minimum Frequency: 0.03 MHz, Maximum Frequency: 70 GHz, RF Port Maximum VSWR: 2:1, Maximum Voltage: 25 Volts, Maximum DC Current: 500 mA. 0.03 MHz to 70 GHz 1.85mm Bias Tee Rated to 500 mA and 25 Volts DC. PE1619 bias tee (also called bias T) has an 1.85mm connector RF port that is female gender. This Pasternack female 1.85mm bias tee design is rated for a minimum frequency of 0.03 MHz and a maximum frequency of 70 GHz. Our RF coaxial bias tee has a sma DC port connector with a female gender. This 1.85mm bias tee / T is rated for a max. DC voltage of 25 Volts and a max. current of 500 mA. The PE1619 bias T with 1.85mm connector series for RF port is designed with a maximum VSWR of 2:1 and a RF to bias isolation minimum of 30 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 1.85mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. |
| 0 | ||
| PE1641 | Pasternack Enterprises | Key Specifications, RF Port Connector Series: 2.92mm, DC Port Connector Series: DC, Minimum Frequency: 0.012 MHz, Maximum Frequency: 40 GHz, RF Port Maximum VSWR: 2.5:1, Maximum Voltage: 16 Volts, Maximum DC Current: 150 mA. 12 KHz to 40 GHz, 2.92mm Broadband Bias Tee, Male Input, Rated to 150 mA and 16 Volts, DC Pin. PE1641 bias tee (also called bias T) has a 2.92mm connector RF port that is male gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack male 2.92mm bias tee design is rated for a minimum frequency of 0.012 MHz and a maximum frequency of 40 GHz. Our RF coaxial bias tee has a 2.92mm DC port connector with a male gender. This 2.92mm bias tee / T is rated for a max. DC voltage of 16 Volts and a max. current of 150 mA. The PE1641 bias T with 2.92mm connector series for RF port is designed with a maximum VSWR of 2.5:1 and a RF to bias isolation typical of 60 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial 2.92mm bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1641 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1641 broadband bias tee from Pasternack operates at temperature ranging from 15°C to 30°C. Our 2.92mm high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with 2.92mm RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement. |
| 0 | ||
| PE1625 | Pasternack Enterprises | Key Specifications, RF Port Connector Series: N, DC Port Connector Series: DC, Minimum Frequency: 10 MHz, Maximum Frequency: 2.5 GHz, RF Port Maximum VSWR: 1.5:1, Maximum Voltage: 100 Volts, Maximum DC Current: 2,500 mA. 10 MHz to 2.5 GHz N Broadband Bias Tee, Male Input, Rated to 2.5 Amps and 100 Volts, DC Pin. PE1625 bias tee (also called bias T) has a type N connector RF port that is male gender. This broadband bias tee is available with 50 Ohm RF/DC port connector impedance. This Pasternack male type N bias tee design is rated for a minimum frequency of 10 MHz and a maximum frequency of 2.5 GHz. Our RF coaxial bias tee has a type N DC port connector with a male gender. This N type bias tee / T is rated for a max. DC voltage of 100 Volts and a max. current of 2,500 mA. The PE1625 bias T with type N connector series for RF port is designed with a maximum VSWR of 1.5:1 and a RF to bias isolation typical of 50 dB. Pasternack's radio frequency bias tee is one of over 40,000 RF, microwave and millimeter wave components supplied by us. Our coaxial type N bias T can be purchased and will be shipped worldwide the same-day as with other in-stock Pasternack RF parts. The Pasternack's PE1625 bias tee, a three-port network, is used to adjust the DC bias point of some electrical components without affecting other components. The Pasternack's PE1625 broadband bias tee from Pasternack operates at temperature ranging from -55°C to 105°C. Our type N high-reliability bias tee is generally used to insert DC power into an AC signal to power remote antenna amplifiers or other devices. The PE1625 type N bias tee has typical and maximum insertion loss of 0.2 dB and 1 dB respectively. Our coaxial broadband bias tee is just part of more than one million RF, microwave and millimeter wave components we carry in-stock. This bias tee with N type RF port is ready to buy and be shipped worldwide. For further information on similar products, our expert technical support and trained sales team can get you to the perfect bias tee as per your requirement. |
| 0 | ||
 Venkel Ltd. | MELFC0102-RE-1601FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�25PPM;1.6K;�1% RoHS : Compliant | 0 | ||
| MELFC0102-RE-1622CT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�25PPM;16.2K;�0.25% RoHS : Compliant | 0 | |||
| MELFC0102-UE-1622FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�25PPM;16.2K;�1% RoHS : Compliant | 0 | |||
| MELFC0102-UE-1651DT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/5W;�25PPM;1.65K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0102-YE-1650CT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/3W;�25PPM;165R;�0.25% RoHS : Compliant | 0 | |||
| MELFC0204-TE-1601CT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�25PPM;1.6K;�0.25% RoHS : Compliant | 0 | |||
| MELFC0204-TE-1691DT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�25PPM;1.69K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-ZE-1691BT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�25PPM;1.69K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0204-ZE-16R5CT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�25PPM;16.5R;�0.25% RoHS : Compliant | 0 | |||
| MELFC0207-VE-1602CT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�25PPM;16K;�0.25% RoHS : Compliant | 0 | |||
| MELFC0207-VE-1692DT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�25PPM;16.9K;�0.5% RoHS : Compliant | 0 | |||
| MELFC0207-XE-1603BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�25PPM;160K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-XE-1693CT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�25PPM;169K;�0.25% RoHS : Compliant | 0 | |||
| MELFM0207-VE-16R5BT | VENKEL LTD | MELF Molded Thin Film CR;0207;1/2W;�25PPM;16.5R;�0.1% RoHS : Not Compliant | 0 | |||
| MELFM0207-XE-1650FT | VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�25PPM;165R;�1% RoHS : Not Compliant | 0 | |||
 Vyrian | LTC2370IDE-16#TRPBF | Analog Devices Inc | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO16 RoHS : Compliant | 11,932 | ||
| LTC2367IDE-16#PBF | Analog Devices Inc | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO16 RoHS : Compliant | 11,771 | |||
| LTC2310CMSE-16-TRPBF | Analog Devices Inc | 11,011 | ||||
| LT3971IMSE16-PBF | Analog Devices Inc | 9,423 | ||||
| LTC2378CDE-16-PBF | Analog Devices Inc | 9,114 | ||||
SAF-XE164KN-40F80LAA | Infineon Technologies AG | RISC Microcontroller, 16-Bit, 80MHz, CMOS RoHS : Compliant | 8,539 | |||
| XE169FH200F100LABFXUMA1 | Infineon Technologies AG | RISC Microcontroller, 16-Bit, FLASH, 100MHz, CMOS, PQFP176 RoHS : Compliant | 8,086 | |||
| LTC2310IMSE-16#PBF | Analog Devices Inc | ADC, Successive Approximation, 16-Bit, 1 Func, 1 Channel, Serial Access, CMOS, PDSO16 RoHS : Compliant | 7,617 | |||
| LT8609AIMSE16#PBF | Analog Devices Inc | Switching Regulator, Current-mode, 3A, 2075kHz Switching Freq-Max, BIPolar, PDSO16 RoHS : Compliant | 7,241 | |||
NE1618DS,112 | NXP Semiconductors | Analog Circuit, 1 Func, PDSO16 RoHS : Compliant | 7,020 | |||
SAK-XE167FM-48F80LAA | Infineon Technologies AG | Microcontroller, 16-Bit, FLASH, 80MHz, CMOS, PQFP144 RoHS : Compliant | 6,283 | |||
| KTD-PN432E/16G | Kingston Technology Company | 5,109 | ||||
| MTFDDAK800MBB-1AE16ABYY | Micron Technology Inc | Flash Memory Drive, 750MBps, CMOS RoHS : Compliant | 4,685 | |||
| SAF-XE167FH-200F100LAB | Infineon Technologies AG | RISC Microcontroller, 16-Bit, FLASH, C166SV2 CPU, 100MHz, CMOS, PQFP144 RoHS : Compliant | 755 | |||
| SAF-XE169FH-200F100LAB | Infineon Technologies AG | RISC Microcontroller, 16-Bit, FLASH, 100MHz, CMOS, PQFP176 RoHS : Compliant | 686 | |||
 Win Source Electronics | CSTNE16M0V530000R0 | Murata Manufacturing Co Ltd | CERAMIC RES 16.0000MHZ 15PF SMD RoHS : Compliant |
| 130,000 | |
M25PE16-VMW6G | Micron Technology Inc | IC FLASH 16MBIT 75MHZ 8SO RoHS : Compliant |
| 18,030 | ||
| CSTCE16M0V53-R0 | Murata Manufacturing Co Ltd | CER RES 16.0000MHZ 15PF SMD / Ceramic Resonator 16MHz ±0.5% (Tol) ±0.3% (Stability) 15pF 40Ohm 3-Pin CSMD T/R RoHS : Compliant |
| 10,000 | ||
VNQ5E160K-E | STMicroelectronics | IC SW M0-5 4CH 10A DGTL PWRSSO24 RoHS : Compliant |
| 9,380 | ||
| VNQ5E160KTR-E | STMicroelectronics | IC SW M0-5 4CH 10A DGTL PWRSSO24 RoHS : Compliant |
| 9,230 | ||
| MKE16Z64VLF4 | Nexperia | IC MCU 32BIT 64KB FLASH 48LQFP |
| 7,500 | ||
ATSAM4E16CA-AN | Microchip Technology Inc | IC MCU 32BIT 1MB FLASH 100LQFP RoHS : Compliant |
| 4,310 | ||
ATSAM4E16EA-AU | Microchip Technology Inc | IC MCU 32BIT 1MB FLASH 144LQFP RoHS : Compliant |
| 4,000 | ||
TMS320VC5416PGE160 | Texas Instruments | IC DSP FIX PT 160-MIPS 144-LQFP RoHS : Compliant |
| 3,500 | ||
ATSAMD21E16B-AU | Microchip Technology Inc | IC MCU 32BIT 64KB FLASH 32TQFP RoHS : Compliant |
| 2,000 | ||
| ATSAMC21E16A-MUT | Microchip Technology Inc | IC MCU 32BIT 64KB FLASH 32VQFN / ARM® Cortex®-M0+ series Microcontroller IC 32-Bit Single-Core 48MHz 64KB (64K x 8) FLASH 32-VQFN (5x5) RoHS : Compliant |
| 2,000 | ||
| SAK-XE167FM-72F80LR AB | Infineon Technologies AG | LQFP-144(20x20) Single Bipolar Transistors RoHS |
| 1,111 | ||
| SAF-XE167F-96F66L AC | Infineon Technologies AG | Others 16 Bit 66MHz 118 LQFP-144(20x20) Microcontrollers RoHS |
| 1,000 | ||
PALCE16V8H-15PC/4 | AMD | RoHS : Not Compliant |
| 500 | ||
| EM6HE16EWAKG-12H | Etron Technology Inc | DDR3-800 256Mx16 (4Gb) RoHS : Compliant |
| 50 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Mexican ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
British
New Zealand