 |
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
|
Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
E75XQG-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
 Avnet Americas | M55342K06B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K06B4E75RS2) RoHS : Not Compliant |
| 26,000 | |
| D55342K07B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 250 mW, 1206 [3216 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: D55342K07B4E75RS2) RoHS : Not Compliant |
| 10,000 | ||
| M55342K11B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 50 mW, 0402 [1005 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K11B4E75RS2) RoHS : Not Compliant |
| 7,500 | ||
| RNCF1206BTE75K0 | SEI Stackpole Electronics Inc | - Tape and Reel (Alt: RNCF1206BTE75K0) RoHS : Compliant |
| 5,000 | ||
| M55342K06B4E75RS3 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K06B4E75RS3) RoHS : Not Compliant |
| 5,000 | ||
| P6KE7.5CA-E3/54 | Vishay Intertechnologies | Diode TVS Single Bi-Dir 6.4V 600W 2-Pin DO-15 T/R - Tape and Reel (Alt: P6KE7.5CA-E3/54) RoHS : Compliant |
| 4,000 | ||
| M55342K12B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: M55342K12B4E75RS2) RoHS : Not Compliant |
| 3,500 | ||
| UE75A206000T | Amphenol Corporation | - Tape and Reel (Alt: UE75A206000T) RoHS : Compliant |
| 2,000 | ||
| PAT0603E7502BST1 | Vishay Intertechnologies | SMD Chip Resistor, 75 kohm, ? 0.1%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PAT Series - Tape and Reel (Alt: PAT0603E7502BST1) RoHS : Compliant |
| 2,000 | ||
| D55342K07B4E75RS3 | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 250 mW, 1206 [3216 Metric], Thin Film, Established Reliability - Tape and Reel (Alt: D55342K07B4E75RS3) RoHS : Not Compliant |
| 1,000 | ||
| PTN0805E7500BST1 | Vishay Intertechnologies | SMD Chip Resistor, 750 ohm, ? 0.1%, 200 mW, 0805 [2012 Metric], Thin Film, Precision, PTN Series - Tape and Reel (Alt: PTN0805E7500BST1) RoHS : Compliant |
| 1,000 | ||
| RV0805E7501DBT | Vishay Intertechnologies | SMD Chip Resistor, 7.5 kOhm, ? 0.5%, 200 mW, 0805 [2012 Metric], Thin Film, High Precision - Custom Tape W/Leader (Alt: RV0805E7501DBT) RoHS : Not Compliant |
| 518 | ||
| M55342K06B4E75RWB | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 150 mW, 0805 [2012 Metric], Thin Film, Established Reliability - Waffle Pack (Alt: M55342K06B4E75RWB) RoHS : Not Compliant |
| 400 | ||
| RE75G24R9C02 | Vishay Intertechnologies | - Bulk (Alt: RE75G24R9C02) RoHS : Not Compliant |
| 9 | ||
TWAE757M060CBEZ0700 | Kyocera AVX Components | - Trays (Alt: TWAE757M060CBEZ0700) RoHS : Compliant |
| 6 | ||
 Newark | P6KE7.5CA | Taiwan Semiconductor | Tvs Diode, 600W, 6.4V, Bidir, Do-204Ac; |Taiwan Semiconductor P6KE7.5CA RoHS : Compliant |
| 4,393 | |
P6KE7.5CA | Littelfuse Inc | Tvs Diode, 11.3V Bidirectional 6.4V; |Littelfuse P6KE7.5CA RoHS : Compliant |
| 3,117 | ||
| P6KE7.5CA | Littelfuse Inc | Tvs Diode, 11.3V Bidirectional 6.4V; |Littelfuse P6KE7.5CA RoHS : Compliant |
| 3,117 | ||
| MMA02040E7501BB100 | Vishay Intertechnologies | Res, Melf, 7K5, 0.1%, 250Mw, Smd; |Vishay MMA02040E7501BB100 RoHS : Compliant |
| 3,048 | ||
| MMA02040E7501BB100 | Vishay Intertechnologies | Res, Melf, 7K5, 0.1%, 250Mw, Smd; |Vishay MMA02040E7501BB100 RoHS : Compliant |
| 3,048 | ||
| RP73PF1E75RBTDF | TE Connectivity | Chip Res Smd, 75R, ±0.1%, 100Mw; |Te Connectivity Cgs RP73PF1E75RBTDF RoHS : Compliant |
| 610 | ||
| RP73PF1E75RBTDF | TE Connectivity | Chip Res Smd, 75R, ±0.1%, 100Mw; |Te Connectivity Cgs RP73PF1E75RBTDF RoHS : Compliant |
| 610 | ||
| RQ73C1E750RBTDF | TE Connectivity | Res, 750R, 0.1%, 0.063W, 0402, Thin Film; |Te Connectivity Holsworthy RQ73C1E750RBTDF RoHS : Compliant |
| 28 | ||
| RQ73C1E750RBTDF | TE Connectivity | Res, 750R, 0.1%, 0.063W, 0402, Thin Film; |Te Connectivity Holsworthy RQ73C1E750RBTDF RoHS : Compliant |
| 28 | ||
| PTE7500-41AG-1A400 | Sensata Technologies | Pressure Transmitter, Gauge, 0-400Bar; |Sensata PTE7500-41AG-1A400 RoHS : Compliant |
| 23 | ||
| PTE7500-21AG-1A100 | Sensata Technologies | Pressure Transmitter, Gauge, 0-100Bar; |Sensata PTE7500-21AG-1A100 RoHS : Compliant |
| 15 | ||
| FE75 | Weller Hand Tools GmbH | Soldering Iron, 80W, 24V; |Weller (Apex Tool Group) FE75 (Alternate Part Number: 037103157461 RoHS : Not Compliant |
| 8 | ||
| SC-05-E75JKH | KEMET Corporation | Common Mode Filter, 8.1Mh, 5A; |Kemet SC-05-E75JKH RoHS : Compliant |
| 5 | ||
| FE75 | Weller Hand Tools GmbH | Soldering Iron, 80W, 24V; |Weller (Apex Tool Group) FE75 (Alternate Part Number: 037103157461 RoHS : Compliant |
| 2 | ||
| E75 | Thomas & Betts | Nonins Bs Rng Term No6 Awg 1/2 Bolt |Abb Thomas & Betts E75 RoHS : Not Compliant |
| 0 | ||
 RS | E750TH | Sola/Hevi-Duty | TRANSFORMER 750VA 240/415/480V PRIMARY 120/240VAC SECONDARY INTERNATIONAL SERIES |
| 41 | |
| SMT-8M-A-PO-24V-E-7,5-OE (574340) | Festo | PROXIMITY SENSOR, SMT-8M-A-PO-24V-E-7, 5-OE |
| 30 | ||
| THINWIRE-7.5M | Stadium Group PLC | CABLE ASSEMBLIES - HDMI TO HDMI |
| 5 | ||
| EA5E750Q (75427) | Banner Engineering Corp | EMITTER, 750MM, RANGE 0.4-4M, 5MM RESOLUTION, 12-30VDC, QD, EZ-ARRAY SERIES |
| 5 | ||
| AVT03006E75R00JE3 | Vishay Dale | RESISTOR; WIREWOUND; INDUSTRIAL POWER; ADJUSTABLE TUBULAR;30W;7.5OHM;5% |
| 5 | ||
| AE75-30-00-81 | ABB Low Voltage Products and Systems | AE75 3P CONTR 24VDC |
| 4 | ||
| XCSE7513 | Telemechanique Sensors | XCS-E SAFETY LIMIT SWITCH POWER TO UNLOCK 24 V AC/DC |
| 3 | ||
| XCSE7512 | Telemechanique Sensors | XCS-E SOLENOID INTERLOCK SWITCH POWER TO LOCK 24 V AC/DC |
| 2 | ||
| XCSTE7512 | Telemechanique Sensors | SAFETY INTERLOCK 240VAC 5AMP T-XCS+O |
| 2 | ||
| SE75PFR-CR0 | Panduit Corp | EXP.SLEEVING,.75"(19.1MM),FLAMERET., RoHS : Compliant |
| 2 | ||
| 24032 CCK30/C3FVE753 | SKF | SPHERICAL ROLLER BEARING, LARGE SIZE |
| 2 | ||
| SE75P-CR0 | Panduit Corp | BRAIDED EXPANDABLE SLEEVING, 0.75"DIA., BLACK, POLYETHYLENE, 100 REEL RoHS : Compliant |
| 1 | ||
| FLUKE-750P00 (4352270) | Fluke Calibration | DIFFERENTIAL PRESSURE MODULE, 0 TO 1 INH2O, 0 TO 2.5 MBAR, 0 TO 0.25 KPA |
| 1 | ||
| FLUKE-750P07 (4352360) | Fluke Calibration | PRESSURE MODULE, 0 TO 500 (0 TO 35 BAR), (0 TO 3500 KPA) |
| 1 | ||
| E75 | STA-KON | NON-INSULATED LARGE BRAZED SEAM RING TERMINAL, 1.49"L X .82"W, BOLT 1/2", #6 |
| 0 | ||
 Microchip Technology Inc | AT30TSE752A-XM8M-T | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-MSOP, MSOP, Projected EOL: 2041-03-23 RoHS : Compliant |
| 43,498 | |
AT30TSE758A-SS8M-T | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-SOIC-N, SOIC, Projected EOL: 2041-06-04 RoHS : Compliant |
| 4,000 | ||
| AT30TSE758A-XM8M-T | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-MSOP, MSOP, Projected EOL: 2040-12-10 RoHS : Compliant |
| 3,145 | ||
| AT30TSE752A-SS8M-T | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-SOIC-N, SOIC, Projected EOL: 2041-03-24 RoHS : Compliant |
| 1,055 | ||
| AT30TSE758A-SS8M-B | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-SOIC-N, SOIC, Projected EOL: 2041-04-18 RoHS : Compliant |
| 1,045 | ||
| MSMCJLCE75A | Microchip Technology Inc | Uni-Directional TVS _ SMCJ (DO-214AB), Projected EOL: 2049-02-05 RoHS : Compliant |
| 538 | ||
| AT30TSE752A-XM8M-B | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-MSOP, MSOP, Projected EOL: 2040-12-01 RoHS : Compliant |
| 178 | ||
| AT30TSE754A-SS8M-B | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-SOIC-N, SOIC, Projected EOL: 2045-12-22 RoHS : Compliant |
| 50 | ||
| MP4KE75A | Microchip Technology Inc | Uni-Directional TVS _ DO-41P, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MXLLCE75A | Microchip Technology Inc | Uni-Directional TVS _ 5A, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| M1.5KE7.5CA | Microchip Technology Inc | Bi-Directional TVS _ CASE 1, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MXLP6KE7.5AE3 | Microchip Technology Inc | Uni-Directional TVS _ T-18, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MA1.5KE75CAE3 | Microchip Technology Inc | Bi-Directional TVS _ CASE 1, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| MXLSMCGLCE7.5AE3 | Microchip Technology Inc | Uni-Directional TVS _ SMCG (DO-215AB), Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| AT30TSE754A-SS8M-T | Microchip Technology Inc | 1.7-5.5V, 1MHz, Ind High Tmp, 8-SOIC-N, SOIC, Projected EOL: 2045-12-22 RoHS : Compliant |
| 0 | ||
 Rochester Electronics | TLE75008EMDXUMA2 | Infineon Technologies AG | Buffer/Inverter Based Peripheral Driver, 0.5A, PDSO24 RoHS : Compliant |
| 4,710 | |
| TLE75242ESDXUMA1 | Infineon Technologies AG | Buffer/Inverter Based Peripheral Driver RoHS : Compliant |
| 220,763 | ||
| TLE75080ESDXUMA1 | Infineon Technologies AG | Power Distribution Switch Relay, Solenoid Driver N-Channel 8 OUT High Side 24-SOP T/R RoHS : Compliant |
| 35,223 | ||
| TLE75004ELDXUMA1 | Infineon Technologies AG | Buffer/Inverter Based Peripheral Driver, 0.5A, PDSO14 RoHS : Compliant |
| 835,000 | ||
| TLE75080EMHXUMA1 | Infineon Technologies AG | Buffer/Inverter Based Peripheral Driver, 0.5A, PDSO24 RoHS : Compliant |
| 107,000 | ||
| TLE75080ESHXUMA1 | Infineon Technologies AG | Buffer/Inverter Based Peripheral Driver RoHS : Compliant |
| 8,070 | ||
ADE7566ASTZF16-RL | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant |
| 9,419 | ||
| AT30TSE754-XM8-B | Atmel Corporation | Serial Switch/Digital Sensor, 12 Bit(s), 3Cel, Square, 8 Pin, Surface Mount RoHS : Compliant |
| 15,479 | ||
| AT30TSE758-XM8-T | Atmel Corporation | Serial Switch/Digital Sensor, 12 Bit(s), 3Cel, Square, 8 Pin, Surface Mount RoHS : Compliant |
| 50,210 | ||
1V5KE75A | Fairchild Semiconductor Corporation | Trans Voltage Suppressor Diode, 1500W, 64.1V V(RWM), Unidirectional, 1 Element, Silicon, DO-201AE RoHS : Not Compliant |
| 208 | ||
| 1V5KE75CA | Fairchild Semiconductor Corporation | Trans Voltage Suppressor Diode, 1500W, 64.1V V(RWM), Bidirectional, 1 Element, Silicon, DO-201AE RoHS : Not Compliant |
| 304 | ||
| RGE7501MC | Intel Corporation | Intel E7501 Chipset Memory Controller Hub (MCH) |
| 2,024 | ||
SIT1602AC-12-18E-75.000000G | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 75MHz 1.62V ~ 1.98V ±25ppm 4-SMD T/R RoHS : Compliant |
| 250 | ||
SIT1602AC-82-18E-75.000000X | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 75MHz 1.62V ~ 1.98V ±25ppm 4-SMD T/R RoHS : Compliant |
| 221 | ||
SIT1602BI-32-18E-75.000000T | SiTime Corporation | CRYSTAL OSC XO (Standard) HCMOS, LVCMOS 75MHz 1.62V ~ 1.98V ±25ppm 4-SMD T/R RoHS : Compliant |
| 4,000 | ||
 Sager | E75 | ABB Group | Fixed Terminal Blocks |
| 0 | |
ATS-05E-75-C1-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM RoHS : Compliant |
| 0 | ||
| FFA.1E.750.CNS | LEMO connectors | Circular Push Pull Connectors STRAIGHT PLUG CABLE COLLET | 0 | |||
| FFA.2E.755.CNS | LEMO connectors | Circular Push Pull Connectors STRAIGHT PLUG CABLE COLLET | 0 | |||
| AAE7545-00 | TE Connectivity | TE Connectivity BTA1-10-06-4-J-CV4018 | 0 | |||
| ATS-09E-75-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 |
| 0 | ||
| SE75PFR-CR0 | Panduit Corp | Spiral Wraps, Sleeves, Tubing & Conduit Exp. Sleeving .75 (19.1mm)Flame Ret. RoHS : Compliant |
| 0 | ||
| SMFE75AH | Eaton Bussmann | ESD Suppressors / TVS Diodes AUTO TVS DIODE, SMFE 200 W FAMILY, 75Vdc |
| 0 | ||
| ATS-09E-75-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 |
| 0 | ||
| ATS-17E-75-C2-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 |
| 0 | ||
| SMFE75ALH | Eaton Bussmann | ESD Suppressors / TVS Diodes AUTO TVS DIODE, SMFE 400 W FAMILY, 75Vdc |
| 0 | ||
| AAE7570-00 | TE Connectivity | TE Connectivity 100P160-19-1-ZN-BK2-01 RoHS : Compliant | 0 | |||
| PTE7500-41AG-1A400 | Sensata Technologies | INDUSTRIAL DIGITAL PRESSURE SENSOR, 400 BAR, CANOPEN, G1/4, FKM SEAL | 0 | |||
| PRQE75W-E12-S12N-D | Bel Fuse | Isolated DC/DC Converters - Through Hole dc-dc isolated, 75 W, 9-75 Vdc input, 12 Vdc, 6.25 A, neg logic, single regulated output, DIP RoHS : Compliant |
| 0 | ||
| ATS-07E-75-C3-R0 | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
 TME | P6KE7.5CA | Diotec Semiconductor AG | Diode: TVS; 7.5V; bidirectional; ±5%; DO15; 600W; P6KE; Ammo Pack RoHS : Compliant |
| 1,527 | |
| SE75PFR-CR0 | Panduit Corp | Braid; ØBraid : 12.7÷31.8nom.19.1mm; PET; black; L: 30m; Braid Se RoHS : Compliant |
| 1 | ||
| RK73B3ATTE753J | KOA Speer Electronics Inc | Resistor: thick film; 75kΩ; SMD; 2512; 1W; ±5%; RK73B; 200V RoHS : Compliant |
| 0 | ||
| RK73BW3ATTE750J | KOA Speer Electronics Inc | Resistor: thick film; 75Ω; SMD; 2512; 1W; ±5%; RK73B; 200V; 200ppm/°C RoHS : Compliant |
| 0 | ||
| FLUKE-750PA8 | Fluke Calibration | Module; 0÷70bar; absolute; pressure |
| 0 | ||
| XCSE7542 | Telemechanique Sensors | Safety switch: bolting; XCSE; NC + NO; IP67; metal; red; 220/240VAC |
| 0 | ||
| CRT02J7E7501 | Viking Technology | Resistor: thick film; 7.5kΩ; 0402; 62.5mW; ±5%; CRT; -55÷155°C; 1A |
| 0 | ||
| CRT0AJ7E7502 | Viking Technology | Resistor: thick film; 75kΩ; 2010; 750mW; ±5%; CRT; -55÷155°C; 2A |
| 0 | ||
| CRT06J7E7501 | Viking Technology | Resistor: thick film; 7.5kΩ; 1206; 250mW; ±5%; CRT; -55÷155°C; 2A |
| 0 | ||
| GCM0335C1E750GA16J | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 75pF; 25V; C0G (NP0); ±2%; SMD; 0201; 330mm RoHS : Compliant |
| 0 | ||
| FLUKE-750PA5 | Fluke Calibration | Module; 0÷2bar; absolute; pressure |
| 0 | ||
| FLUKE-750PV4 | Fluke Calibration | Module; 0÷-1bar; vacuum pressure module; pressure |
| 0 | ||
| TP6KE75CA | Littelfuse Inc | Diode: TVS; 71.3V; 5.9A; bidirectional; DO15,DO204AC; 0.6kW; Ch: 1 RoHS : Compliant |
| 0 | ||
| FLUKE-750PD10 | Fluke Calibration | Module; -700÷700mbar; dual; pressure |
| 0 | ||
| FLUKE-750PD5 | Fluke Calibration | Module; -1÷2bar; dual; pressure |
| 0 | ||
 Ameya Holding Limited | EP4CE75F23I7N | Intel Corporation | IC FPGA 292 I/O 484FBGA RoHS : Compliant | 120 | ||
 ComSIT USA | TLE75004ELD | NXP Semiconductors | AVAILABLE EU | 3,442 | ||
| Q120JXE7511250100T1LF | Jauch Quartz America | AVAILABLE EU | 34,109 | |||
| MMA02040E7500BB300 | Vishay Intertechnologies | AVAILABLE EU RoHS : Compliant | 4,171 | |||
| Q300JXE7511250100T3FULF | Jauch Quartz America | AVAILABLE EU | 8,078 | |||
ComSIT USA | TLE75602EMD | Infineon Technologies AG | SPI DRIVER FOR ENHANCED RELAY CONTROL Buffer/Inverter Based Peripheral Driver RoHS : Compliant | 57,975 | ||
| LG5411TE7500 | Siemens | ORANGE SUPER BRIGHT T1 3/4 (5MM) LED LAMP Single Color LED, Orange, Colorless Clear, T-1 3/4, 5mm RoHS : Not Compliant | 18,000 | |||
| LHGBT686E7510 | OSRAM GmbH | HYPER-BRIGHT MULTI TOPLED Triple Color LED, Hyper Red/green/blue, Colorless Clear, 2.4mm RoHS : Not Compliant | 12,700 | |||
| SFH309FA5E7500 | OSRAM GmbH | Radial T1 Photo transistor Photo Transistor, 900nm, 0.015A I(C) RoHS : Not Compliant | 11,251 | |||
| TLE75004ELDXUMA1 | Infineon Technologies AG | Buffer/Inverter Based Peripheral Driver, 0.5A, PDSO14 RoHS : Compliant | 4,497 | |||
| P6KE75A | Littelfuse Inc | TVS DIODE Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC RoHS : Compliant | 4,000 | |||
| P6KE75AE354 | Vishay Intertechnologies | TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Unidirectional, 1 Element, Silicon, DO-204AC RoHS : Compliant | 3,820 | |||
| P6KE75CAR0 | TSC Electronics Ltd | TRANSIENT VOLTAGE SUPPRESSOR Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AC RoHS : Compliant | 3,000 | |||
| 15KE75AE354 | Vishay Intertechnologies | Trans Voltage Suppressor Diode, 1500W, 6.4V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant | 1,400 | |||
| Q160JXE752125050T1LF | Jauch Quartz America | Electronic Component RoHS : Compliant | 1,000 | |||
| Q160JXE7511250100T1LF | Jauch Quartz America | Electronic Component RoHS : Compliant | 1,000 | |||
| F90T12NS1E757A01B1 | Nidec Corporation | Electronic Component RoHS : Not Compliant | 27 | |||
| E75W12R33 | Deutronic Elektronik GmbH | Electronic Component RoHS : Compliant | 12 | |||
EP4CE75F23I7N | Altera Corporation | CYCLONE IV FPGA DEVICE FAMILY Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA484 RoHS : Compliant | 9 | |||
| JGE7501MC | Intel Corporation | Dynamic RAM (DRAM) Tray RoHS : Compliant | 8 | |||
 GLYN GmbH & Co. KG | EP4CE75F23I7N | Altera Corporation | Cyclone-IVE FPGA 484-BGA -40/+85øC RoHS : Compliant | 205 | ||
 Interstate Connecting Components | SE75PFR-CR0 | Panduit Corp | EXP. SLEEVING, .75 (19.1MM),FLAME RET., BLACK RoHS : Compliant |
| 1 | |
| MWDM5L-9GS-8E7-5S | Glenair Inc | 0 | ||||
| MWDL-25S-4E7-5B | Glenair Inc |
| 0 | |||
| M2478-E-75 FT | Glenair Inc | EMI/ EMP CONDUIT | 0 | |||
| E75750-000 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYC202D932-25-04-CS-1821- | 0 | |||
| AE75-000125 | Conesys | C8944-25 | 0 | |||
| FRVE754VP62419PT104MRB | ITT Interconnect Solutions | FRVE75-4VP624-19PT104-MRB | 0 | |||
| 233-218-CMNF21E-75SN | Glenair Inc | 0 | ||||
| MWDM1L-100GP-6E7-50S | Glenair Inc | 0 | ||||
| MWDM2L-37S-6E7-54S | Glenair Inc | 0 | ||||
| EE7548-000 | TE Connectivity | BAH-033000081 | 0 | |||
| D38999/26ME75SN | SOURIAU-SUNBANK | Stecker, Gr� e 17 RoHS : Compliant | 0 | |||
| E75893-000 | TE Connectivity | ZCSM-8/3-1000/U RoHS : Compliant | 0 | |||
| EE7527-000 | TE Connectivity | BAH-036010083 | 0 | |||
| AE75-000102 | Conesys | 0 | ||||
 NexGen Digital | RK73B3ATTE753J | KOA Speer Electronics Inc | RoHS : Compliant | 4,000 | ||
 PEI Genesis | R58HB35E75X036 | SOURIAU-SUNBANK |
| 0 | ||
| FFA.1E.750.CNS | LEMO connectors |
| 0 | |||
| UE75A202001T | Amphenol Corporation |
| 0 | |||
| R58HB18E75A018 | SOURIAU-SUNBANK |
| 0 | |||
| J2CE7521-20S0A | ITT Interconnect Solutions |
| 0 | |||
| FFA.0E.750.CNS | LEMO connectors |
| 0 | |||
| FFA.1E.755.CNS | LEMO connectors |
| 0 | |||
| UE75A205000T | Amphenol Corporation |
| 0 | |||
| 4120-G111-K1M1-A1S0ZE-7.5A | E-T-A |
| 0 | |||
| R58HB45E75A160 | SOURIAU-SUNBANK |
| 0 | |||
| UE75-A20-6000T | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
 PUI | FSE-750MA | 285 | ||||
 Chip 1 Exchange | LYT670-KE7510 | OSRAM GmbH | INSTOCK | 44,229 | ||
| RK73K1E750JD | KOA Speer Electronics Inc | INSTOCK | 9,945 | |||
| LPT670HE7510 | INSTOCK | 7,900 | ||||
| LST676-Q2-E7510 | INSTOCK | 7,500 | ||||
| LPT670H1E7510 | INSTOCK | 4,950 | ||||
| P6KE75CA | GS Battery | INSTOCK | 3,030 | |||
| TE-75-11184-49 | INSTOCK | 2,000 | ||||
| 1.5KE7.5A_AY_10001 | PanJit Semiconductor | INSTOCK RoHS : Compliant | 1,589 | |||
| SFH415TE7508 | Siemens | INSTOCK | 1,000 | |||
| JXE75/1-12-50/50-FU-LF | Jauch Quartz America | INSTOCK | 800 | |||
| JXE75/1 24MHZ | INSTOCK | 399 | ||||
| PHCE75C92012-X02-G | Foxconn | INSTOCK | 146 | |||
| EP4CE75F23C8N | Altera Corporation | INSTOCK RoHS : Compliant | 60 | |||
| WS-006(E7510) | WELL | INSTOCK | 36 | |||
| FSE-750-10 | INSTOCK | 2 | ||||
 Avnet Abacus | MMA02040E7509BB300 | Vishay Intertechnologies | - Tape and Reel (Alt: MMA02040E7509BB300) RoHS : Compliant | 6,000 | ||
| M55342K06B4E75RS2 | Vishay Intertechnologies | SMD Chip Resistor 475 kohm 1 150 mW 0805 2012 Metric Thin Film Established Reliability (Alt: M55342K06B4E75RS2) RoHS : Not Compliant | 1,000 | |||
| UE75A206000T | Amphenol Corporation | Conn SFP RCP SMD 20 POS 08mm Solder RA SMD 20 Terminal 1 Port TR - Tape and Reel (Alt: UE75A206000T) RoHS : Compliant | 500 | |||
| TE750B3R3J | TE Connectivity | Resistor 33 Ohm 5 750 W Wirewound High Power Solder Lug (Alt: 1879452-7) RoHS : Compliant | 0 | |||
| RE75G24R0C02 | Vishay Intertechnologies | (Alt: RE75G24R0C02) RoHS : Compliant | 0 | |||
| RE75N36R5C02 | Vishay Intertechnologies | (Alt: RE75N36R5C02) RoHS : Compliant | 0 | |||
| P0603E7500BNT | Vishay Intertechnologies | - Tape and Reel (Alt: P0603E7500BNT) RoHS : Compliant | 0 | |||
| ALV70C121DE750 | KEMET Corporation | Cap Alu 85C 120F 750VDC (Alt: ALV70C121DE750) RoHS : Compliant | 0 | |||
| RK73B3ATTE750J | KOA Speer Electronics Inc | SMD Chip Resistor 75 ohm 5 1 W 2512 6432 Metric Thick Film General Purpose - Tape and Reel (Alt: RK73B3ATTE750J) RoHS : Compliant | 0 | |||
| RK73B2HTTE751J | KOA Speer Electronics Inc | FC 2010 5 - Tape and Reel (Alt: RK73B2HTTE751J) RoHS : Compliant | 0 | |||
| PTN1206E7503BST1 | Vishay Intertechnologies | SMD Chip Resistor 750 kohm 01 400 mW 1206 3216 Metric Thin Film Precision PTN Series - Tape and Reel (Alt: PTN1206E7503BST1) RoHS : Compliant | 0 | |||
| PTN0603E7502BBT0 | Vishay Intertechnologies | SMD Chip Resistor 75 kohm 01 150 mW 0603 1608 Metric Thin Film Precision PTN Series - Tape and Reel (Alt: PTN0603E7502BBT0) RoHS : Not Compliant | 0 | |||
| PTN0603E7501BST1 | Vishay Intertechnologies | SMD Chip Resistor 75 kohm 01 150 mW 0603 1608 Metric Thin Film Precision PTN Series - Tape and Reel (Alt: PTN0603E7501BST1) RoHS : Compliant | 0 | |||
| PTN0805E7501BSTF | Vishay Intertechnologies | SMD Chip Resistor 75 kohm 01 200 mW 0805 2012 Metric Thin Film Precision PTN Series - Tape and Reel (Alt: PTN0805E7501BSTF) RoHS : Compliant | 0 | |||
| PTN0805E7502BST1 | Vishay Intertechnologies | SMD Chip Resistor 75 kohm 01 200 mW 0805 2012 Metric Thin Film Precision PTN Series - Tape and Reel (Alt: PTN0805E7502BST1) RoHS : Compliant | 0 | |||
Avnet Asia | PTN0603E7501BST1 | Vishay Intertechnologies | SMD Chip Resistor, 7.5 kohm, ? 0.1%, 150 mW, 0603 [1608 Metric], Thin Film, Precision, PTN Series (Alt: PTN0603E7501BST1) RoHS : Compliant | 0 | ||
| E757312 | Elo Touch Solutions Inc | (Alt: E757312) RoHS : Compliant | 0 | |||
| GRM0225C1E750GA02D | Murata Manufacturing Co Ltd | MURGRM0225C1E750GA02D CHIP MULTILAYER CE (Alt: GRM0225C1E750GA02D) RoHS : Compliant | 0 | |||
| TWAE757M075CBEZ0700 | Kyocera AVX Components | (Alt: TWAE757M075CBEZ0700) RoHS : Compliant | 0 | |||
| UE75-A20-3000T | Amphenol Corporation | Pluggable I/O Connector, SFP, 20 Contacts, 1 x 1 (Port), Surface Mount Right Angle, UE75 Series (Alt: UE75-A20-3000T) RoHS : Compliant | 0 | |||
| M55342H12B4E75RTS | Vishay Intertechnologies | SMD Chip Resistor, 4.75 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342H12B4E75RTS) RoHS : Compliant | 0 | |||
| SMDJE75A | Eaton Corporation | (Alt: SMDJE75A) RoHS : Compliant | 0 | |||
T495B106K010ATE750 | KEMET Corporation | Surface Mount Tantalum Capacitor, 10 uF, 10 V, 1411 [3528 Metric], ? 10%, 750 mohm, 337 mA (Alt: T495B106K010ATE750) RoHS : Compliant |
| 0 | ||
| PCNM1206E75R0BST5 | Vishay Intertechnologies | Res Precision Thin Film 1206 75 Ohm 0.1% 2W ?25ppm/?C Molded SMD T/R (Alt: PCNM1206E75R0BST5) RoHS : Compliant | 0 | |||
| SIT1602AC-12-18E-75.000000G | SiTime Corporation | (Alt: SIT1602AC-12-18E-75.000000G) RoHS : Compliant | 0 | |||
| PHP01206E75R0BST5 | Vishay Intertechnologies | Res Thin Film 1206 75Ohm 0.1% 1W ?25ppm/?C Molded T/R (Alt: PHP01206E75R0BST5) RoHS : Compliant | 0 | |||
| PHPA2512E75R0BST1 | Vishay Intertechnologies | Res High Power Thin Film 2512 75 Ohm 0.1% 2.5W ?25ppm/?C Molded T/R (Alt: PHPA2512E75R0BST1) RoHS : Compliant | 0 | |||
| 1V5KE75CA | Taiwan Semiconductor | Transient Voltage Suppressor Bi-Directional 64.1V 1500W 2-Pin DO-201AE (Alt: 1V5KE75CA) RoHS : Compliant | 0 | |||
| M55342K11B4E75RS6 | Vishay Intertechnologies | (Alt: M55342K11B4E75RS6) RoHS : Compliant | 0 | |||
| PHP02512E75R0BST5 | Vishay Intertechnologies | (Alt: PHP02512E75R0BST5) RoHS : Compliant | 0 | |||
 Avnet Silica | MASMCJLCE7.5AE3 | Microchip Technology Inc | (Alt: MASMCJLCE75AE3) RoHS : Compliant | 0 | ||
| P6KE75A _AY _10001 | PanJit Semiconductor | (Alt: P6KE75A_AY_10001) RoHS : Compliant | 0 | |||
| AT30TSE754A-SS8M-T | Microchip Technology Inc | (Alt: AT30TSE754A-SS8M-T) RoHS : Compliant | 0 | |||
| P6KE75A_ R2 _10001 | PanJit Semiconductor | (Alt: P6KE75A_R2_10001) RoHS : Compliant | 0 | |||
| IS42RM16320E-75BLI | Integrated Silicon Solution Inc | DRAM Chip Mobile SDRAM 512Mbit 32M X 16 25V 54Pin TFBGA (Alt: IS42RM16320E-75BLI) RoHS : Compliant | 0 | |||
| AT30TSE752A-XM8M-B | Microchip Technology Inc | (Alt: AT30TSE752A-XM8M-B) RoHS : Compliant | 0 | |||
| AT30TSE752A-XM8M-T | Microchip Technology Inc | (Alt: AT30TSE752A-XM8M-T) RoHS : Compliant | 0 | |||
| AT30TSE754A-XM8M-T | Microchip Technology Inc | (Alt: AT30TSE754A-XM8M-T) RoHS : Compliant | 0 | |||
AT30TSE752A-MA8M-T | Microchip Technology Inc | (Alt: AT30TSE752A-MA8M-T) RoHS : Compliant | 0 | |||
| P4KE7.5A _AY _10001 | PanJit Semiconductor | (Alt: P4KE7.5A_AY_10001) RoHS : Compliant | 0 | |||
| P4KE7.5CA _AY _10001 | PanJit Semiconductor | (Alt: P4KE7.5CA_AY_10001) RoHS : Compliant | 0 | |||
| 1.5KE75CA _AY _10001 | PanJit Semiconductor | (Alt: 1.5KE75CA_AY_10001) RoHS : Compliant | 0 | |||
| P6KE7.5CA_ R2 _10001 | PanJit Semiconductor | (Alt: P6KE7.5CA_R2_10001) RoHS : Compliant | 0 | |||
| 1.5KE7.5CA _AY _10001 | PanJit Semiconductor | (Alt: 1.5KE7.5CA_AY_10001) RoHS : Compliant | 0 | |||
| SIT8008BI-82-33E-75.000000T | SiTime Corporation | (Alt: SIT8008BI-82-33E-75.000000T) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | ASE7-50.000MHZ-LR-T | Abracon Corporation |
| 0 | ||
| ASE7-50.000MHZ-LC-T | Abracon Corporation |
| 0 | |||
| ANLTE7-50HRA | Multi-Tech Systems Inc | LTE Antenna, 7.75" (2 dBi). 50-pack |
| 0 | ||
 Component Electronics, Inc | RK73H2ATE7503F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 20,000 | |
| RK73H2BTE7501F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 6,400 | ||
| RK73H2ATE75R0F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 4,000 | ||
| T495B106K010ATE750 | KEMET Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,105 | ||
| 1.5KE75CA | Littelfuse Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 1,000 | ||
| P6KE7.5CA/1 | GS Battery | IN STOCK SHIP TODAY |
| 950 | ||
| 1.5KE75A-E3/54 | Vishay Intertechnologies | IN STOCK SHIP TODAY RoHS : Compliant |
| 770 | ||
| MBB0207-15-0.1%-PE-75R5 | Philips Semiconductors | IN STOCK SHIP TODAY |
| 225 | ||
| P1206E75R0BBT | TEXAS COMP | IN STOCK SHIP TODAY | 94 | |||
| P6KE7.5CA | World Products Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 85 | ||
| 1.5KE75CA | STMicroelectronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 65 | ||
| P6KE7.5CA | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 47 | ||
| RE75G5R00 | Ohmite Mfg Co | IN STOCK SHIP TODAY |
| 22 | ||
| RN55E7500F | Vishay Dale | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 17 | ||
| PLE75039-125.0MHZ | IN STOCK SHIP TODAY | 15 | ||||
 DB Roberts | E-750 | Bivar Inc | ECON-O-GIDES, PRESS-IN CARD GUIDE, 7.5 IN. LENGTH, 0.078 |
| 73 | |
| SLCSE-750-3-01 | Essentra Components | Wire SdlSpacerNatural3/16 in Spc Wire Saddle Spacer Natural | 0 | |||
| SLCSE-750-4-01 | Essentra Components | 0 | ||||
 EBV Elektronik | BXE75T60HFHD | Bridgelux Inc | Transistor IGBT NCH 600V 150A 3Pin TO247 Tube (Alt: BXE75T60HFHD) RoHS : Compliant | 1,000 | ||
| 1V5KE75A | Taiwan Semiconductor | Transient Voltage Suppressor UniDirectional 641V 1500W 2Pin DO201AE (Alt: 1V5KE75A) RoHS : Compliant | 0 | |||
| P6KE75CA | Taiwan Semiconductor | Diode TVS Single BiDirectional 641V 600W 2Pin DO15 (Alt: P6KE75CA) RoHS : Compliant | 0 | |||
| P6KE7.5CA | Taiwan Semiconductor | Diode TVS Single BiDirectional 641V 600W 2Pin DO15 (Alt: P6KE7.5CA) RoHS : Compliant | 0 | |||
| 1.5KE75A-E3/54 | Vishay Intertechnologies | 15KW75V 5UNIDIRAXIAL TVS (Alt: 1.5KE75A-E3/54) RoHS : Compliant | 0 | |||
| P6KE7.5A-E3/54 | Vishay Intertechnologies | Diode TVS Single UniDir 64V 600W 2Pin DO15 TR (Alt: P6KE7.5A-E3/54) RoHS : Compliant | 0 | |||
| TLE75080ESDXUMA1 | Infineon Technologies AG | SPIDER (Alt: SP001635022) RoHS : Compliant | 0 | |||
| TLE75602ESDXUMA1 | Infineon Technologies AG | SPIDER (Alt: SP001635030) RoHS : Compliant | 0 | |||
| AT30TSE754A-SS8M-T | Microchip Technology Inc | (Alt: AT30TSE754A-SS8M-T) RoHS : Compliant | 0 | |||
| AT30TSE752A-XM8M-B | Microchip Technology Inc | (Alt: AT30TSE752A-XM8M-B) RoHS : Compliant | 0 | |||
| AT30TSE758A-SS8M-B | Microchip Technology Inc | (Alt: AT30TSE758A-SS8M-B) RoHS : Compliant | 0 | |||
| AT30TSE752A-XM8M-T | Microchip Technology Inc | (Alt: AT30TSE752A-XM8M-T) RoHS : Compliant | 0 | |||
| AT30TSE754A-XM8M-T | Microchip Technology Inc | (Alt: AT30TSE754A-XM8M-T) RoHS : Compliant | 0 | |||
| AT30TSE752A-MA8M-T | Microchip Technology Inc | (Alt: AT30TSE752A-MA8M-T) RoHS : Compliant | 0 | |||
| EX-4211-EEE-7582-100M000000 | Microchip Technology Inc | EX4211EEE7582100M000000 (Alt: EX-4211-EEE-7582-100M000000) RoHS : Not Compliant | 0 | |||
 Master Electronics | E75 | Thomas & Betts | Ring Tongue Terminal 6AWG Electrolytic Copper 37.84mm Electro Tin RoHS : Compliant |
| 125 | |
| P6KE7.5CA | World Products Inc | Diode TVS Single Bi-Dir 6.4V 600W 2-Pin DO-41 RoHS : Compliant |
| 100 | ||
| FLUKE-753 | Fluke Calibration | The FLUKE-753 is a multifunctional documenting process calibrator used to measure source and calibrate temperature pressure voltage current resistance and frequency. RoHS : Compliant |
| 1 | ||
| SE75PFR-CR0 | Panduit Corp | Braided Expandable Sleeving 0.75 diameter (19.1mm) provides continuous abrasion resistance for wires cables and tubing. The highly flexible open weave will not trap heat or humidity black Flame Retardant Polyethylene Terephthalate 100 ft. per reel. RoHS : Compliant |
| 1 | ||
| TE750B3R3J | TE Connectivity | TE 750W 3R3 5% Bracket Tubular Resistors Fixed Resistor RoHS : Compliant |
| 0 | ||
| MXLP6KE7.5AE3 | Microchip Technology Inc | TVS 7.5V 5% 600W uni RoHS : Compliant |
| 0 | ||
| MP4KE75A | Microchip Technology Inc | TVS 75V 5% 400W uni RoHS : Compliant |
| 0 | ||
| HAE75-48S24W | P-DUKE | DC-DC Converter - 75W - Vout: 24 VDC - Vin: 18 to 75 VDC - PCB Mount - 3kV Isolation - Remote On/Off RoHS : Compliant |
| 0 | ||
| MA1.5KE75CAE3 | Microchip Technology Inc | TVS 75V 5% 1500W bi RoHS : Compliant |
| 0 | ||
| MXLLCE75A | Microchip Technology Inc | Low Cap TVS 75V 5% 1500W uni 100pF RoHS : Compliant |
| 0 | ||
| MXLSMCGLCE7.5AE3 | Microchip Technology Inc | Low Cap TVS 7.5V 5% 1500W uni 100pF RoHS : Compliant |
| 0 | ||
| M1.5KE7.5CA | Microchip Technology Inc | TVS 7.5V 5% 1500W bi RoHS : Compliant |
| 0 | ||
| AT30TSE754A-SS8M-T | Microchip Technology Inc | Temp Sensor Digital Serial (2-Wire I2C SMBus) 8-Pin SOIC T/R RoHS : Compliant |
| 0 | ||
| E75750-000 | TE Connectivity | Heat Shrink Cable Boots & End Caps 202D932-25-04-CS-1821-0 MOQ Reduction RoHS : Compliant |
| 0 | ||
| MX1.5KE7.5A | Microchip Technology Inc | TVS 7.5V 5% 1500W uni RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE7512-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 40 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 5 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: 2.92mm, Connector-In Gender: Male, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 85 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Body Rated to 5 Watts Up to 40 GHz. PE7512-10 is a 10 dB fixed attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7512-10 in-series fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 85 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7512-10 attenuator is rated for maximum frequency up to 40 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7512-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 9 | |
| PE7514-30 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 40 GHz, Nominal Attenuation: 30 dB, Attenuation Accuracy, Typ: 3 dB, VSWR, Max: 1.5:1, Input Power, Max (CW): 50 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: 2.92mm, Connector-In Gender: Male, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 100 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Body Rated to 50 Watts Up to 40 GHz. PE7514-30 is a 30 dB fixed attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7514-30 in-series fixed attenuator is available with a typical attenuation accuracy of 3 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.5:1 and operates between -55 and 100 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with black anodized aluminum body material. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 30 dB. The Pasternack PE7514-30 attenuator is rated for maximum frequency up to 40 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7514-30 will ship the same business day as purchased from Pasternack’s production facility. This 30 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE7512-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 40 GHz, Nominal Attenuation: 3 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 5 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: 2.92mm, Connector-In Gender: Male, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 85 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Body Rated to 5 Watts Up to 40 GHz. PE7512-3 is a 3 dB fixed attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7512-3 in-series fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 85 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 3 dB. The Pasternack PE7512-3 attenuator is rated for maximum frequency up to 40 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7512-3 will ship the same business day as purchased from Pasternack’s production facility. This 3 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE7533-30 | Pasternack Enterprises | Key Specifications, Design: Continuously Variable, Maximum Frequency: 8 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.5:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 30 dB, Step Type: Dial. 0 to 30 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 4 GHz to 8 GHz. PE7533-30 is a continuously variable attenuator from Pasternack. Our coaxial adjustable attenuator has an impedance of 50 Ohm and is precision manufactured to RF and microwave industry specifications. This RF variable attenuator comes with a maximum insertion loss of 0.5 dB. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7533-30 variable RF attenuator has a SMA female connector configuration and a rotary dial for continuous attenuation level adjustment. Our PE7533-30 variable attenuator has a maximum attenuation of 30 dB. This microwave RF variable attenuator has a frequency range of 4 GHz to 8 GHz and a maximum VSWR of 1.5:1. Our continuously variable attenuator is rated to 5 Watts (CW) at the stated attenuation. Our continuously variable attenuator has an overall length of 2 inches, a width of 1.25 inches, and weighs 0.02 lbs. This radio frequency continuously variable attenuator with SMA connectors is built with aluminum. Additional dimensions and specifications for this 30 dB variable attenuator are on our downloadable PDF datasheet above. Our variable attenuator PE7533-30 is shipped the same business day as purchased from Pasternack’s facility. This attenuator is part of our RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF variable attenuator as per your requirements. |
| 3 | ||
| PE7580-50 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 50 dB, Attenuation Accuracy, Typ: 1.2 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 50 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-50 is a 50 dB fixed attenuator from Pasternack. This 50 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-50 fixed attenuator is available with a typical attenuation accuracy of 1.2 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 50 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 50 dB. The Pasternack PE7580-50 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 50 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-50 will ship the same business day as purchased from Pasternack’s production facility. This 50 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7580-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 3 dB, Attenuation Accuracy, Typ: 0.7 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-3 is a 3 dB fixed attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-3 fixed attenuator is available with a typical attenuation accuracy of 0.7 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 3 dB. The Pasternack PE7580-3 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 3 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-3 will ship the same business day as purchased from Pasternack’s production facility. This 3 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7580-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 0.8 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 50 Watts Up to 10 GHz. PE7580-10 is a 10 dB fixed attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7580-10 fixed attenuator is available with a typical attenuation accuracy of 0.8 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7580-10 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 10 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7580-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7512-6 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 40 GHz, Nominal Attenuation: 6 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 5 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: 2.92mm, Connector-In Gender: Male, Connector-Out Series: 2.92mm, Connector-Out Gender: Female, Max Operating Temperature: 85 deg C, Min Operating Temperature: -55 deg C. 6 dB Fixed Attenuator, 2.92mm Male to 2.92mm Female Black Anodized Aluminum Body Rated to 5 Watts Up to 40 GHz. PE7512-6 is a 6 dB fixed attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7512-6 in-series fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 85 deg C. Our fixed radio frequency attenuator with 2.92mm connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.92mm attenuator has a male gender on side 1 and a 2.92mm female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 6 dB. The Pasternack PE7512-6 attenuator is rated for maximum frequency up to 40 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7512-6 will ship the same business day as purchased from Pasternack’s production facility. This 6 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7531-30 | Pasternack Enterprises | Key Specifications, Design: Continuously Variable, Maximum Frequency: 8 GHz, Impedance: 50 Ohm, Power Maximum: 5 Watt, VSWR Maximum: 1.8:1, Connector Series 1: SMA, Connector Gender 1: Female, Connector Series 2: SMA, Connector Gender 2: Female, Minimum Attenuation: 0 dB, Maximum Attenuation: 30 dB, Step Type: Dial. 0 to 30 dB Variable Attenuator, SMA Female to SMA Female Rated to 5 Watts from 1 GHz to 8 GHz. PE7531-30 is a continuously variable attenuator from Pasternack. Our coaxial adjustable attenuator has an impedance of 50 Ohm and is precision manufactured to RF and microwave industry specifications. This RF variable attenuator comes with a maximum insertion loss of 0.5 dB. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7531-30 variable RF attenuator has a SMA female connector configuration and a rotary dial for continuous attenuation level adjustment. Our PE7531-30 variable attenuator has a maximum attenuation of 30 dB. This microwave RF variable attenuator has a frequency range of 1 GHz to 8 GHz and a maximum VSWR of 1.8:1. Our continuously variable attenuator is rated to 5 Watts (CW) at the stated attenuation. Our continuously variable attenuator has an overall length of 2.5 inches, a width of 2 inches, and weighs 0.02 lbs. This radio frequency continuously variable attenuator with SMA connectors is built with aluminum. Additional dimensions and specifications for this 30 dB variable attenuator are on our downloadable PDF datasheet above. Our variable attenuator PE7531-30 is shipped the same business day as purchased from Pasternack’s facility. This attenuator is part of our RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you the ideal RF variable attenuator as per your requirements. |
| 2 | ||
| PE7582-40 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 40 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.5:1, Input Power, Max (CW): 150 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 40 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 150 Watts Up to 10 GHz. PE7582-40 is a 40 dB fixed attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7582-40 fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 150 Watts. This attenuator has a maximum VSWR of 1.5:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 40 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 40 dB. The Pasternack PE7582-40 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 40 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7582-40 will ship the same business day as purchased from Pasternack’s production facility. This 40 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7511-20 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 50 GHz, Nominal Attenuation: 20 dB, VSWR, Max: 1.45:1, Input Power, Max (CW): 5 Watts, Body Material: Aluminum, Connector-In Series: 2.4mm, Connector-In Gender: Male, Connector-Out Series: 2.4mm, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20 dB Fixed Attenuator, 2.4mm Male to 2.4mm Female Aluminum Body Rated to 5 Watts Up to 50 GHz. PE7511-20 is a fixed 20 dB attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.45:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with 2.4mm connectors is constructed with aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 20 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This 2.4mm attenuator has a male gender on side 1 and a 2.4mm female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 20 dB. The Pasternack PE7511-20 attenuator is rated for up to 50 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The 20 dB attenuator has a stainless steel connector built with plating. Our fixed RF attenuator PE7511-20 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 20 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE7520-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: QMA, Connector-In Gender: Male, Connector-Out Series: QMA, Connector-Out Gender: Female. 10 dB Fixed Attenuator, QMA Male to QMA Female Brass Tri-Metal Body Rated to 2 Watts Up to 6 GHz. PE7520-10 is a fixed 10 dB attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7520-10 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. Our fixed radio frequency attenuator with QMA connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This QMA attenuator has a male gender on side 1 and a QMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7520-10 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, 5G cellular bands and DAS systems applications. The 10 dB attenuator has a brass connector built with tri-metal plating. Our fixed RF attenuator PE7520-10 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 10 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE7520-15 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 15 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: QMA, Connector-In Gender: Male, Connector-Out Series: QMA, Connector-Out Gender: Female. 15 dB Fixed Attenuator, QMA Male to QMA Female Brass Tri-Metal Body Rated to 2 Watts Up to 6 GHz. PE7520-15 is a fixed 15 dB attenuator from Pasternack. This 15 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7520-15 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. Our fixed radio frequency attenuator with QMA connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 15 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This QMA attenuator has a male gender on side 1 and a QMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 15 dB. The Pasternack PE7520-15 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, 5G cellular bands and DAS systems applications. The 15 dB attenuator has a brass connector built with tri-metal plating. Our fixed RF attenuator PE7520-15 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 15 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE7520-6 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 6 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Brass, Connector-In Series: QMA, Connector-In Gender: Male, Connector-Out Series: QMA, Connector-Out Gender: Female. 6 dB Fixed Attenuator, QMA Male to QMA Female Brass Tri-Metal Body Rated to 2 Watts Up to 6 GHz. PE7520-6 is a fixed 6 dB attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-day shipping. Pasternack’s PE7520-6 fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. Our fixed radio frequency attenuator with QMA connectors is constructed with brass body material and tri-metal plating. The connectorized bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This QMA attenuator has a male gender on side 1 and a QMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 6 dB. The Pasternack PE7520-6 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for instrumentation, precision measurements, prototyping and characterization, production systems, 5G cellular bands and DAS systems applications. The 6 dB attenuator has a brass connector built with tri-metal plating. Our fixed RF attenuator PE7520-6 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 6 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE7583-30 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 10 GHz, Nominal Attenuation: 30 dB, Attenuation Accuracy, Typ: 1.2 dB, VSWR, Max: 1.5:1, Input Power, Max (CW): 200 Watts, Body Material: Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator, N Male to N Female Aluminum Black Anodized Body Rated to 200 Watts Up to 10 GHz. PE7583-30 is a 30 dB fixed attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7583-30 fixed attenuator is available with a typical attenuation accuracy of 1.2 dB. The max input power rating (CW) of this RF attenuator is 200 Watts. This attenuator has a maximum VSWR of 1.5:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with aluminum body material and black anodized plating. The connectorized unidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 30 dB. The Pasternack PE7583-30 attenuator is rated for maximum frequency up to 10 GHz. This fixed coaxial attenuator is suitable for precision measurements, production systems, instrumentation, prototyping and characterization and 5G and 6G communications applications. The 30 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7583-30 will ship the same business day as purchased from Pasternack’s production facility. This 30 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
 Venkel Ltd. | HPTF1206-UE-7502FT | VENKEL LTD | High Power Thin Film CR;1206;1/3W;�25PPM;75K;�1% RoHS : Compliant | 0 | ||
| HPTF1210-UE-75R0AT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�25PPM;75R;�0.05% RoHS : Compliant | 0 | |||
| HPTF2010-UE-7500FT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�25PPM;750R;�1% RoHS : Compliant | 0 | |||
| TFCR0201-20W-E-7500DT | VENKEL LTD | Thin Film CR;0201;1/20W;�25PPM;750R;�0.5% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-75R9FT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;75.9R;�1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-7590FT | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;759R;�1% RoHS : Compliant | 0 | |||
| TFCR0603-10W-E-75R9BT | VENKEL LTD | Thin Film CR;0603;1/10W;�25PPM;75.9R;�0.1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-E-7503FT | VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;750K ;�1% RoHS : Compliant | 0 | |||
| TFCR0603-16W-E-7591FT-1K | VENKEL LTD | Thin Film CR;0603;1/16W;�25PPM;7.59K;�1% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-7503CT | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;750K ;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-7593DT | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;759K ;�0.5% RoHS : Compliant | 0 | |||
| TFCR1206-4W-E-7503FT-1K | VENKEL LTD | Thin Film CR;1206;1/4W;�25PPM;750K ;�1% RoHS : Compliant | 0 | |||
| TFCR1206-4W-E-7590BT-1K | VENKEL LTD | Thin Film CR;1206;1/4W;�25PPM;759R;�0.1% RoHS : Compliant | 0 | |||
| TFCR1206-4W-E-75R0FT | VENKEL LTD | Thin Film CR;1206;1/4W;�25PPM;75R;�1% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-7592BT-1K | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;75.9K;�0.1% RoHS : Compliant | 0 | |||
 Vyrian | TWAE757M060CBEZ0700 | KYOCERA AVX | Tantalum Capacitor, Polarized, Tantalum (wet), 60V, 20% +Tol, 20% -Tol, 750uF, Through Hole Mount | 16,810 | ||
V07E75P | Littelfuse Inc | Varistor, 100V, 14J, Through Hole Mount RoHS : Compliant | 12,464 | |||
| ADE7566ASTZF16-RL | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant | 9,774 | |||
| TWAE757M075CBEZ0700 | KYOCERA AVX | Tantalum Capacitor, Polarized, Tantalum (wet), 75V, 20% +Tol, 20% -Tol, 750uF, Through Hole Mount | 9,228 | |||
| TP6KE75CA | Littelfuse Inc | Trans Voltage Suppressor Diode, 600W, 64.1V V(RWM), Bidirectional, 1 Element, Silicon, DO-204AC RoHS : Compliant | 5,975 | |||
| ADE7569ASTZF16-RL | Analog Devices Inc | Analog Circuit, 1 Func RoHS : Compliant | 5,780 | |||
| M1.5KE7.5A | Microchip Technology Inc | Trans Voltage Suppressor Diode, 1500W, 6.4V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Not Compliant | 4,537 | |||
| RGE7500PL | Intel Corporation | Memory Controller, CMOS, CBGA1005 RoHS : Not Compliant | 3,771 | |||
| EP4CE75F29I8L | Intel / Altera | Field Programmable Gate Array, 4713 CLBs, 362MHz, 75408-Cell, PBGA780 | 3,700 | |||
| EP4CE75F23I7N | Intel / Altera | Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA484 | 3,066 | |||
| EP4CE75F23I7 | Intel / Altera | Field Programmable Gate Array, 4713 CLBs, 75408-Cell, PBGA484 | 2,059 | |||
| EP4CE75F23C8 | Intel / Altera | Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA484 | 1,839 | |||
| EP4CE75F23C8N | Intel / Altera | Field Programmable Gate Array, 4713 CLBs, 472.5MHz, 75408-Cell, PBGA484 | 1,541 | |||
| M55342M05B4E75RS6 | Vishay Intertechnologies | Fixed Resistor, Metal Glaze/thick Film, 0.225W, 4750ohm, 175V, 1% +/-Tol, 300ppm/Cel, Surface Mount, 2208 RoHS : Not Compliant | 686 | |||
| RE75N3R01C02 | Vishay Intertechnologies | Fixed Resistor, Wire Wound, 30W, 3.01ohm, 9.5026V, 1% +/-Tol, 50ppm/Cel, Chassis Mount RoHS : Not Compliant | 626 | |||
 Win Source Electronics | TLE75602-ESH?INFINEON | Infineon Technologies AG | Switches & Controller |
| 15,000 | |
| TLE75602-ESH | Infineon Technologies AG | 8 330mA TSDSO-24 Power Distribution Switches, Load Drivers RoHS RoHS : Compliant |
| 10,000 | ||
| TLE75008ESDXUMA1 | Infineon Technologies AG | IC PWR DRVR N-CHAN 1:8 TSDSO-24 RoHS : Compliant |
| 9,560 | ||
| TLE75602ESHXUMA1 | Infineon Technologies AG | IC PWR DRVR N-CHAN 1:8 TSDSO-24 / Power Switch/Driver 1:8 N-Channel 330mA PG-TSDSO-24-21 RoHS : Compliant |
| 8,347 | ||
| TLE75242-ESD | Infineon Technologies AG | 16 bit Multichannel SPI Switches & Controller RoHS : Compliant |
| 3,000 | ||
| TLE75080ESHXUMA1 | Infineon Technologies AG | IC PWR DRVR N-CHAN 1:8 TSDSO-24 RoHS : Compliant |
| 2,316 | ||
| EP4CE75F23C8N | Altera Corporation | IC FPGA 292 I/O 484FBGA RoHS : Compliant |
| 2,000 | ||
| EP4CE75F23I7N | Altera Corporation | IC FPGA 292 I/O 484FBGA RoHS : Compliant |
| 1,680 | ||
| EP4CE75F29I7N | Intel Corporation | IC FPGA 426 I/O 780FBGA / series Field Programmable Gate Array (FPGA) IC 426 2810880 75408 780-BGA RoHS : Compliant |
| 1,042 | ||
| EP4CE75F23C6 | Altera Corporation | IC FPGA 292 I/O 484FBGA RoHS : Not Compliant |
| 623 | ||
| EP4CE75U19I7N | Intel Corporation | IC FPGA 292 I/O 484UBGA RoHS : Compliant |
| 252 | ||
| TLE75602-ESD | Infineon Technologies AG | Switches & Controller RoHS : Compliant |
| 178 | ||
| EP4CE75F29I7 | Intel Corporation | IC FPGA 426 I/O 780FBGA RoHS : Not Compliant |
| 16 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Mexican ▼ 
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
British
New Zealand