| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
E76ZPA-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() Avnet Americas | GRM155R60E475ME76D![]() | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor, 4.7 uF, 2.5 V, 0402 [1005 Metric], ? 20%, X5R, GRM Series, 1 mm - Tape and Reel (Alt: GRM155R60E475ME76D) RoHS : Compliant |
| 10,000 | |
| UE76A203000T | Amphenol Corporation | Conn SFP RCP 20 POS 0.8mm Solder RA SMD 20 Terminal 1 Port T/R - Tape and Reel (Alt: UE76A203000T) RoHS : Compliant |
| 4,000 | ||
| MT53E768M16D1ZW-046 WT:C | Micron Technology Inc | DRAM, LPDDR4 SDRAM, 12 Gbit, 768M x 16bit, 2.133 GHz, 200 Pins, TFBGA - Trays (Alt: MT53E768M16D1ZW-046 WT:C) RoHS : Compliant | 1,360 | |||
| UE76A205000T | Amphenol Corporation | Pluggable I/O Connector, SFP+, 20 Contacts, 1 x 1 (Single), Surface Mount Right Angle - Tape and Reel (Alt: UE76A205000T) RoHS : Compliant |
| 500 | ||
| MDBE09PE760 | Amphenol Corporation | D Sub Connector, Standard, Plug, MDB Series, 9 Contacts, DE, Solder - Bulk (Alt: 49X2647) RoHS : Compliant |
| 0 | ||
| MWDM2L-21S-6E7-6M | Glenair Inc | - Bulk (Alt: MWDM2L-21S-6E7-6M) RoHS : Not Compliant |
| 0 | ||
| MWDM2L-31S-8E7-6P | Glenair Inc | - Bulk (Alt: MWDM2L-31S-8E7-6P) RoHS : Not Compliant |
| 0 | ||
| MWDM2L-51S-4E7-60B | Glenair Inc | - Bulk (Alt: MWDM2L-51S-4E7-60B) RoHS : Not Compliant |
| 0 | ||
| MT53E768M32D2NP-053 RS WT:A TR | Micron Technology Inc | - Tape and Reel (Alt: MT53E768M32D2NP-053 RS WT:A TR) RoHS : Compliant | 0 | |||
| MT53E768M64D8SQ-046 WT:E TR | Micron Technology Inc | LPDDR4 48G 768MX64 FBGA 8DP - Tape and Reel (Alt: MT53E768M64D8SQ-046 WT:E TR) RoHS : Compliant | 0 | |||
| MCT06030E7681BP100 | Vishay Intertechnologies | - Tape and Reel (Alt: MCT06030E7681BP100) RoHS : Compliant |
| 0 | ||
| MDBE09PE760 | Amphenol Corporation | D Sub Connector, Standard, Plug, MDB Series, 9 Contacts, DE, Solder - Trays (Alt: MDBE09PE760) RoHS : Compliant |
| 0 | ||
| MT53E768M32D2FW-046 AIT:C TR | Micron Technology Inc | LPDDR4 24G 768MX32 FBGA - Tape and Reel (Alt: MT53E768M32D2FW-046 AIT:C TR) RoHS : Compliant | 0 | |||
| MT53E768M32D2ZW-046 AIT:C | Micron Technology Inc | DRAM, Mobile LPDDR4, 24 Gbit, 768M x 32bit, 2.133 GHz, TFBGA, 200 Pins - Trays (Alt: MT53E768M32D2ZW-046 AIT:C) RoHS : Compliant | 0 | |||
| MT53E768M32D4DE-053 AIT:E | Micron Technology Inc | - Trays (Alt: MT53E768M32D4DE-053 AIT:E) RoHS : Not Compliant | 0 | |||
![]() Newark | GRM21BR70J106KE76L![]() | Murata Manufacturing Co Ltd | CAP, MLCC, 10UF, 6.3VDC, X7R, 0805; RoHS : Compliant |
| 12,273 | |
GRM21BR70J106KE76L![]() | Murata Manufacturing Co Ltd | CAP, MLCC, 10UF, 6.3VDC, X7R, 0805; RoHS : Compliant |
| 12,273 | ||
| UE76A205000T | Amphenol Communications Solutions | I/O CONN, SFP+, 20POS, 1 X 1 (SINGLE); RoHS : Compliant |
| 754 | ||
| RP73PF1E76K8BTDF | TE Connectivity | RES, 76K8, 0.1%, 0.1W, 0402, THIN FILM; RoHS : Compliant |
| 568 | ||
| RP73PF1E76K8BTDF | TE Connectivity | RES, 76K8, 0.1%, 0.1W, 0402, THIN FILM; RoHS : Compliant |
| 568 | ||
| MT53E768M16D1ZW-046 AIT:C | Micron Technology Inc | DRAM, LPDDR4, 12GBIT; Available until stocks are exhausted RoHS : Not Compliant |
| 100 | ||
| MT53E768M32D2ZW-046 AUT:C | Micron Technology Inc | SDRAM, 24GBIT, 2.133 GHZ, TFBGA-200; Available until stocks are exhausted RoHS : Compliant |
| 61 | ||
| MT53E768M64D4HJ-046 AUT:C | Micron Technology Inc | SDRAM, 48GBIT, 2.133 GHZ, TFBGA-556; Available until stocks are exhausted Alternative available RoHS : Compliant |
| 50 | ||
| MT53E768M64D4HJ-046 AIT:C | Micron Technology Inc | SDRAM, 48GBIT, 2.133 GHZ, TFBGA-556; Available until stocks are exhausted Alternative available RoHS : Compliant |
| 42 | ||
| MT53E768M64D4HJ-046 AAT:C | Micron Technology Inc | SDRAM, 48GBIT, 2.133 GHZ, TFBGA-556; Available until stocks are exhausted Alternative available RoHS : Compliant |
| 42 | ||
| OCI-490-20 IE760-XE-T | EPIGAP OSA Photonics | IR EMITTER, 0.35A, 760NM, SMD; RoHS : Compliant |
| 41 | ||
| OCI-490-20 IE760-XE-T | EPIGAP OSA Photonics | IR EMITTER, 0.35A, 760NM, SMD; RoHS : Compliant |
| 41 | ||
| E763NEO | Eclipse Magnetics | NDFEB SHALLOW POT, 13MM X 4.5MM; RoHS : Not Compliant |
| 29 | ||
| MIKROE-764 | MikroElektronika | DEBUGGER, MIKROPROG, PIC-DSPIC-PIC32; RoHS : Compliant |
| 8 | ||
| MT53E768M32D2ZW-046 WT:C | Micron Technology Inc | SDRAM, 24GBIT, 2.133 GHZ, TFBGA-200; DRAM Type:Mobile LPDDR4; Memory Configuration:768M x 32bit; Clock Frequency Max:2.133GHz; IC Case / Package:TFBGA; No. of Pins:200Pins; Supply Voltage Nom:1.1V; IC Mounting:Surface Mount RoHS Compliant: Yes RoHS : Compliant |
| 4 | ||
![]() RS | MIKROE-763 | MikroElektronika | DEVELOPMENT BOARDS & KITS, PIC / DSPIC MINI-32 BOARD |
| 23 | |
| VP2310BE761MB200 | Norgren | VALVE, PROP PRESS DN16 0-10 BAR, HERION |
| 5 | ||
| VP2316BE761MB200 | Norgren | PROP/PRESSURE VALVE ND16 16BA, PRESSURE SWITCHES |
| 4 | ||
| LE7-63-1753 | Sprecher + Schuh | LE7 UL508 DISCONNECT SWITCH, FRONT MOUNT, 63A, 3-POLE, POLES 3-POLE, GRAY, LE7 |
| 3 | ||
| LSG55T012E76S | Nidec Motor Corporation | GEARMOTOR, STEPPING, 55MM, 0.10 STEP, 12VDC, 75 GEAR REDUCT, TORQUE 162 OZ-IN |
| 3 | ||
| LC1D09FE7 (6089330) | Schneider Electric | NON-REVERSING CONTACTOR, 115VAC, 9A, 3-P, DIN RAIL, TESYS D SERIES |
| 1 | ||
| LC1D25FE7 (6089598) | Schneider Electric | NON-REVERSING CONTACTOR, 115VAC, 25A, 3-P, DIN RAIL, TESYS D SERIES |
| 1 | ||
| E76 | Siemens | HEATER |
| 0 | ||
| TZE765 | Brother International | 1.4IN X 26.2 FT (36MM X 8M), WHITE INK ON GREEN LABEL |
| 0 | ||
| MDBE09PE760 | Amphenol Commercial | CONNECTOR, RUGGED D SUB, 9 PIN, VERTICAL |
| 0 | ||
| UE76-A20-3000T | Amphenol Commercial | CONNECTOR SFP+ RCPT 20PS R/A SMD GOLD |
| 0 | ||
| E76-CNT010N-M12 | Eaton Cutler-Hammer | 10CM CONTRAST MARK SENSOR, 18MM BODY, M12 CONN, NPN |
| 0 | ||
| K50APPBGRE (76316) | Banner Engineering Corp | PICK-TO-LIGHT PUSHBUTTON, 50MM, 12-30VDC, PNP, GRN/RED, 2M CBL, K50 SERIES |
| 0 | ||
| K50RPPBGRE (76328) | Banner Engineering Corp | PICK-TO-LIGHT PUSHBUTTON, 50MM, 12-30VDC, PNP, GRN/RED, 2M CBL, K50 SERIES |
| 0 | ||
| FO-1253.875-3REE7.625 | Bimba Manufacturing Company | CYLINDER, FLAT-I, DBL ACT, SGL ROD, ; 4IN BORE ; STROKE: 3.875 INCH(S); THREAD |
| 0 | ||
![]() Microchip Technology Inc | EV88E76A | Microchip Technology Inc | EVB-LAN7801-EDS, Projected EOL: |
| 13 | |
![]() Bisco Industries | MS20470E7-6 | MS Rivets | 120 | |||
![]() Rochester Electronics | BA885E7631HTMA1 | Infineon Technologies AG | PIN Diode RoHS : Compliant |
| 50,000 | |
![]() Sager | AAE7626-00 | TE Connectivity | TE Connectivity 100P3281-1-25-SBTP-08E-L40-1-CHP | 0 | ||
| 12XE760-FR | EnerSys | 12XE760-FR |
| 0 | ||
ATS-04E-76-C1-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM RoHS : Compliant |
| 0 | ||
ATS-11E-76-C1-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,NO TIM |
| 0 | ||
| SETLGNYE7.62AU0A | C&K Switches | Pushbutton Switches | 0 | |||
| FFA.3E.760.CNS | LEMO connectors | Circular Push Pull Connectors STRAIGHT PLUG CABLE COLLET |
| 0 | ||
ATS-04E-76-C2-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 RoHS : Compliant |
| 0 | ||
ATS-11E-76-C2-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 |
| 0 | ||
| E7603HD | ABB Group | Thomas & Betts |
| 0 | ||
| E76962-000 | TE Connectivity | Multi-Conductor Cables 82A1131-26-2/4/6-9 RoHS : Compliant |
| 0 | ||
ATS-14E-76-C2-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 |
| 0 | ||
ATS-21E-76-C2-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T766 RoHS : Compliant |
| 0 | ||
ATS-06E-76-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
ATS-09E-76-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 |
| 0 | ||
ATS-16E-76-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:RIGHT-TABBED,BLUE,T412 |
| 0 | ||
![]() TME | E766NEO | Eclipse Magnetics | Magnet: permanent; NdFeB; 196N; Ø: 25mm; H: 7mm; zinc plated steel |
| 30 | |
| CRT05F7E7680 | Viking Technology | Resistor: thick film; 768Ω; 0805; 125mW; ±1%; CRT; -55÷155°C; 2A |
| 0 | ||
| CRT02J7E7684 | Viking Technology | Resistor: thick film; 7.68MΩ; 0402; 62.5mW; ±5%; CRT; -55÷155°C |
| 0 | ||
| MT53E768M16D1ZW-046 WT:C TR | Micron Technology Inc | IC: DRAM memory; 12GbDRAM; 2.133GHz; -25÷85°C |
| 0 | ||
| MT53E768M32D4DT-053 WT:E | Micron Technology Inc | IC: DRAM memory; 24GbDRAM; 1.866GHz; -25÷85°C; 1.1V |
| 0 | ||
| MCT0603ME7680BP100 | Vishay Intertechnologies | Resistor: thin film; 768Ω; SMD; 0603; 0.21W; ±0.1%; MCT0603; M; 75V RoHS : Compliant |
| 0 | ||
| CRT03F7E7681 | Viking Technology | Resistor: thick film; 7.68kΩ; 0603; 100mW; ±1%; CRT; -55÷155°C; 1A |
| 0 | ||
| CRT03J7E7680 | Viking Technology | Resistor: thick film; 768Ω; 0603; 100mW; ±5%; CRT; -55÷155°C; 1A |
| 0 | ||
| CRT05F7E7684 | Viking Technology | Resistor: thick film; 7.68MΩ; 0805; 125mW; ±1%; CRT; -55÷155°C; 2A |
| 0 | ||
| CRT05J7E7681 | Viking Technology | Resistor: thick film; 7.68kΩ; 0805; 125mW; ±5%; CRT; -55÷155°C; 2A |
| 0 | ||
| CRT06J7E76R8 | Viking Technology | Resistor: thick film; 76.8Ω; 1206; 250mW; ±5%; CRT; -55÷155°C; 2A |
| 0 | ||
| CRT0AF7E76R8 | Viking Technology | Resistor: thick film; 76.8Ω; 2010; 750mW; ±1%; CRT; -55÷155°C; 2A |
| 0 | ||
| CRT12F7E7683 | Viking Technology | Resistor: thick film; 768kΩ; 2512; 1W; ±1%; CRT; -55÷155°C; 2A |
| 0 | ||
| CRT12J7E7680 | Viking Technology | Resistor: thick film; 768Ω; 2512; 1W; ±5%; CRT; -55÷155°C; 100ppm/°C |
| 0 | ||
| CRT10F7E7680 | Viking Technology | Resistor: thick film; 768Ω; 1210; 500mW; ±1%; CRT; -55÷155°C; 2A |
| 0 | ||
![]() ComSIT USA | GRM21BR70J106KE76L![]() | Murata Manufacturing Co Ltd | AVAILABLE EU RoHS : Compliant | 8,570 | ||
![]() Interstate Connecting Components | MWDM2L-21S-6E7-6M | Glenair Inc | RoHS : Compliant | 0 | ||
| MWDM2L-31S-8E7-6P | Glenair Inc | 0 | ||||
| MWDM2L-51S-4E7-60B | Glenair Inc | 0 | ||||
| MDBE09PE760 | Amphenol Commercial | RUGGED D SUB, 9 PIN, VERTICAL | 0 | |||
| 62GB12E1415PE760 | Amphenol PCD | 62GB | 0 | |||
| 62GB16F1002PE760771 | Amphenol PCD | 62GB | 0 | |||
| 62GB16F1412PE760 | Amphenol PCD | 62GB | 0 | |||
| 62GB56T0898PE760771 | Amphenol PCD | 62GB | 0 | |||
| 62GB56T1203PE760 | Amphenol PCD | 62GB | 0 | |||
| 62GB56T1412SE760771 | Amphenol PCD | 62GB | 0 | |||
| 62GB56T2041SE760 | Amphenol PCD | 62GB | 0 | |||
| 62GB56TG1006PE760 | Amphenol PCD | 62GB | 0 | |||
| 62GB12E1811PE760 | Amphenol PCD | 62GB | 0 | |||
| 62GB12E2204SE760 | Amphenol PCD | 62GB | 0 | |||
| 62GB16F0803SE760 | Amphenol PCD | 62GB | 0 | |||
![]() PEI Genesis | 62GB-50T10-07PE-760-771 | Amphenol Corporation |
| 84 | ||
| UE76-A20-3000T | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| UE76A205000T | Amphenol Corporation |
| 0 | |||
| UE76-3GA22-3D00T | Amphenol Corporation |
| 0 | |||
| 62GB-56TG08-02SE-760-714 | Amphenol Corporation |
| 0 | |||
| FFA.1E.760.CNS | LEMO connectors |
| 0 | |||
| FFA.2E.765.CNS | LEMO connectors |
| 0 | |||
| UE76-A20-3010T | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| 62GB-12E10-07SE-760-LC | Amphenol Corporation |
| 0 | |||
| 62GB-56T10-06PE-760 | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| UE76-3GA20-5600T | Amphenol Corporation |
| 0 | |||
| 62GB-16F10-07SE-760-771 | Amphenol Corporation |
| 0 | |||
| 62GB-56T10-07SE-760-771 | Amphenol Corporation | RoHS : Compliant |
| 0 | ||
| 62GB-56TG08-02SE-760 | Amphenol Corporation |
| 0 | |||
| FFA.2E.760.CNS | LEMO connectors |
| 0 | |||
![]() Powell Electronics | E76198-000 | TE Connectivity | Labels and Industrial Warning Signs RoHS : Compliant |
| 3,267 | |
| E76065-000 | TE Connectivity | Wire & Cable |
| 323 | ||
| 62GB-50T10-07PE-760-771 | Amphenol Corporation | 62GB 7C 7#20 PIN PLUG BZ |
| 55 | ||
| FFA.1E.760.CNS | LEMO connectors | COLLET 1K DIAM 5.6 - 6 |
| 3 | ||
![]() Richardson RFPD | CME7660-000 | Skyworks Solutions Inc | Diode RF Schottky 3V RoHS : Compliant | 0 | ||
| CDE7618-000 | Skyworks Solutions Inc | Diode RF Schottky 3V RoHS : Compliant |
| 0 | ||
| E7611LF(516685) | Rakon Limited | Low Acceleration Sensitivity RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | GRM21BR70J106KE76L![]() | Murata Manufacturing Co Ltd | INSTOCK RoHS : Compliant | 2,895 | ||
AFE7686IABJ![]() | Texas Instruments | INSTOCK RoHS : Compliant | 1,534 | |||
| E76D350VGS472MP54C | INSTOCK | 187 | ||||
| E76D101VGS102MP54C | INSTOCK | 7 | ||||
![]() Avnet Abacus | E76198-000 | TE Connectivity | (Alt: E76198-000) RoHS : Compliant | 0 | ||
| E76962-000 | TE Connectivity | (Alt: E76962-000) RoHS : Compliant | 0 | |||
| MDBE09PE760 | Amphenol Corporation | D Sub Connector Standard Plug MDB Series 9 Contacts DE Solder (Alt: MDBE09PE760) RoHS : Compliant | 0 | |||
| UE76A205000T | Amphenol Corporation | Pluggable IO Connector SFP 20 Contacts 1 x 1 Single Surface Mount Right Angle - Tape and Reel (Alt: UE76A205000T) RoHS : Compliant | 0 | |||
| P0603E7681BBT | Vishay Intertechnologies | SMD Chip Resistor 768 kOhm 01 125 mW 0603 1608 Metric Thin Film - Tape and Reel (Alt: P0603E7681BBT) RoHS : Not Compliant | 0 | |||
| MDB-E09SE-760 | Amphenol Corporation | Conn DSubminiature SKT 9 POS 274mm Solder ST ThruHole 9 Terminal 1 Port (Alt: MDB-E09SE-760) RoHS : Compliant | 0 | |||
| RV0805E7682BBT | Vishay Intertechnologies | SMD Chip Resistor 768 kOhm 01 500 mW 0805 2012 Metric Thin Film High Precision - Tape and Reel (Alt: RV0805E7682BBT) RoHS : Not Compliant | 0 | |||
| UE763GA202600T | Amphenol Corporation | Connector SFP Receptacle 20 Position 08mm Right Angle Surface Mount TR - Tape and Reel (Alt: UE763GA202600T) RoHS : Compliant | 0 | |||
| UE763GA206600T | Amphenol Corporation | Connector SFP Receptacle 20 Position 08mm Right Angle Surface Mount TR - Tape and Reel (Alt: UE763GA206600T) RoHS : Compliant | 0 | |||
| UE76-A20-2000T | Amphenol Corporation | Pluggable IO Connector SFP 20 Contacts 1 x 1 Single Surface Mount Right Angle - Tape and Reel (Alt: UE76-A20-2000T) RoHS : Compliant | 0 | |||
| RN73C1E76R8BTDF | TE Connectivity | SMD Chip Resistor 768 Ohm 01 63 mW 0402 1005 Metric Thin Film (Alt: 5-1879125-3) RoHS : Compliant | 0 | |||
| M55342K06B9E76RWB | Vishay Intertechnologies | SMD Chip Resistor 976 kohm 1 150 mW 0805 2012 Metric Thin Film Established Reliability (Alt: M55342K06B9E76RWB) RoHS : Compliant | 0 | |||
GRM155R60E475ME76J![]() | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 47 uF 25 V 0402 1005 Metric 20 X5R GRM Series 1 mm - Tape and Reel (Alt: GRM155R60E475ME76J) RoHS : Compliant | 0 | |||
| MMA02040E7680DB100 | Vishay Intertechnologies | Surface Mount MELF Resistor 768 Ohm 05 250 mW 0204 3715 Metric Metal Film Thin Film - Tape and Reel (Alt: MMA02040E7680DB100) RoHS : Compliant | 0 | |||
| MCT06030E7682BP100 | Vishay Intertechnologies | - Tape and Reel (Alt: MCT06030E7682BP100) RoHS : Compliant | 0 | |||
![]() Avnet Asia | UE76-A20-3000T | Amphenol Corporation | Conn SFP RCP 20 POS 0.8mm Solder RA SMD 20 Terminal 1 Port T/R (Alt: UE76-A20-3000T) RoHS : Compliant | 0 | ||
| UE763GA202600T | Amphenol Corporation | Connector SFP Receptacle 20 Position 0.8mm Right Angle Surface Mount T/R (Alt: UE763GA202600T) RoHS : Compliant | 0 | |||
| MCT06030E7682BP100 | Vishay Intertechnologies | (Alt: MCT06030E7682BP100) RoHS : Compliant | 0 | |||
| UE76-A20-2000T | Amphenol Corporation | Pluggable I/O Connector, SFP+, 20 Contacts, 1 x 1 (Single), Surface Mount Right Angle (Alt: UE76-A20-2000T) RoHS : Compliant |
| 0 | ||
| E763556 | Elo Touch Solutions Inc | (Alt: E763556) RoHS : Compliant | 0 | |||
| UE76-3GA22-3800T | Amphenol Corporation | (Alt: UE76-3GA22-3800T) RoHS : Compliant | 0 | |||
| UE76-A20-5000T | Amphenol Corporation | SFP+ CONNECTOR (Alt: UE76-A20-5000T) RoHS : Compliant | 0 | |||
| MDB-E09PE-765 | Amphenol Corporation | (Alt: MDB-E09PE-765) RoHS : Compliant | 0 | |||
| M55342K12B9E76RTSV | Vishay Intertechnologies | SMD Chip Resistor, 9.76 kohm, ? 1%, 100 mW, 0603 [1608 Metric], Thin Film, Established Reliability (Alt: M55342K12B9E76RTSV) RoHS : Not Compliant | 0 | |||
| UE76-3GA20-2600T | Amphenol Corporation | Connector SFP Receptacle 20 Position 0.8mm Right Angle Surface Mount T/R (Alt: UE76-3GA20-2600T) RoHS : Compliant | 0 | |||
| UE76-3GA20-6600T | Amphenol Corporation | Connector SFP Receptacle 20 Position 0.8mm Right Angle Surface Mount T/R (Alt: UE76-3GA20-6600T) RoHS : Compliant | 0 | |||
| UE76A203010T | Amphenol Corporation | (Alt: UE76A203010T) RoHS : Compliant | 0 | |||
| UE76A202000T | Amphenol Corporation | (Alt: UE76A202000T) RoHS : Compliant |
| 0 | ||
| UE76A202000T | Amphenol Corporation | Pluggable I/O Connector, SFP+, 20 Contacts, 1 x 1 (Single), Surface Mount Right Angle (Alt: UE76A202000T) RoHS : Compliant | 0 | |||
![]() Avnet Silica | EV88E76A | Microchip Technology Inc | EVBLAN7801EDS (Alt: EV88E76A) RoHS : Compliant | 0 | ||
| MT53E768M64D4HJ-046 AAT:C | Micron Technology Inc | DRAM Mobile LPDDR4 48 Gbit 768M x 64bit 2133 GHz TFBGA 556 Pins (Alt: MT53E768M64D4HJ-046 AAT:C) RoHS : Compliant | 0 | |||
| MT53E768M32D2ZW-046 AUT:C | Micron Technology Inc | DRAM Mobile LPDDR4 24 Gbit 768M x 32bit 2133 GHz TFBGA 200 Pins (Alt: MT53E768M32D2ZW-046 AUT:C) RoHS : Compliant | 0 | |||
| MT53E768M16D1ZW-046 AIT:C | Micron Technology Inc | DRAM LPDDR4 12 Gbit 2133 GHz TFBGA 200 Pins (Alt: MT53E768M16D1ZW-046 AIT:C) RoHS : Compliant | 0 | |||
| SIT8008BI-11-33E-76.800000G | SiTime Corporation | Silicon Oscillator 68MHz 33V 15pF 4Pin QFN TR (Alt: SIT8008BI-11-33E-76.800000G) RoHS : Compliant | 0 | |||
| MT53E768M64D4HJ-046 AUT:C TR | Micron Technology Inc | LPDDR4 48GBIT 64 556841 TFBGA 4 UT (Alt: MT53E768M64D4HJ-046 AUT:C TR) RoHS : Compliant | 0 | |||
| MT53E768M64D4HJ-046 AAT:C TR | Micron Technology Inc | LPDDR4 48GBIT 64 556841 TFBGA 4 AT (Alt: MT53E768M64D4HJ-046 AAT:C TR) RoHS : Compliant | 0 | |||
| MT53E768M32D2ZW-046 AUT:C TR | Micron Technology Inc | LPDDR4 24GBIT 32 200264 TFBGA (Alt: MT53E768M32D2ZW-046 AUT:C TR) RoHS : Compliant | 0 | |||
| MT53E768M16D1ZW-046 AIT:C TR | Micron Technology Inc | LPDDR4 12GBIT 16 200264 TFBGA 1 IT (Alt: MT53E768M16D1ZW-046 AIT:C TR) RoHS : Compliant | 0 | |||
| JOYMT53E768M32D4DT-053 AIT:E TR | Micron Technology Inc | LPDDR4 24G 768MX32 FBGA AIT QDP (Alt: MT53E768M32D4DT-053 AIT:E TR) RoHS : Compliant | 0 | |||
![]() Chip-Germany GmbH | MT53E768M32D4DT-046 WT:E | Micron Technology Inc | 10,000 | |||
| MT53E768M32D4DT-053 AIT:E | Micron Technology Inc | 10,000 | ||||
| MT53E768M32D4DT-053 AIT:E (DDR4) | Micron Technology Inc | 10,000 | ||||
| MT53E768M32D2ZW-046 AIT:C | 5,000 | |||||
| MT53E768M32D2ZW-046 AAT:C | 5,000 | |||||
![]() Component Electronics, Inc | RK73H2BTE7683F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 8,000 | |
| RK73H1E76R8FT | IN STOCK SHIP TODAY | 3,820 | ||||
| M55342K02B9E76R | State of the Art Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 500 | ||
| NE76100 | NEC Electronics Group | IN STOCK SHIP TODAY | 455 | |||
GRM21BR70J106KE76L![]() | Murata Manufacturing Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 150 | ||
| PTN0603E7681BBW | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 40 | ||
| LE767361TS | Texas Instruments | IN STOCK SHIP TODAY | 4 | |||
| NE76038D | NEC Electronics Group | IN STOCK SHIP TODAY | 3 | |||
![]() FDH Electronics | LOCTITE 7649 | FDH Electronics | Supplies - ESG | 3 | ||
| MWDM2L-21S-6E7-6M | Glenair Inc | Connector MIL M RoHS : Compliant | 0 | |||
| MWDM2L-31S-8E7-6P | Glenair Inc | Connector | 0 | |||
| MWDM2L-51S-4E7-60B | Glenair Inc | Connector MIL M | 0 | |||
| MWDM1L-37P-4E7-6P | Glenair Inc | Connector MIL M RoHS : Not Compliant | 0 | |||
| MWDM1L-9S-6E7-6P | Glenair Inc | Connector | 0 | |||
| MWDM2L-21S-6E7-6S | Glenair Inc | Connector MIL M RoHS : Compliant | 0 | |||
| MWDM2L-25P-4E7-60B | Glenair Inc | Connector MIL M | 0 | |||
| MWDM1L-100P-6E7-6P | Glenair Inc | Connector | 0 | |||
| MWDM1L-31S-0E7-6B | Glenair Inc | Connector | 0 | |||
| MWDM2L-25P-8E7-6M | Glenair Inc | Connector MIL M RoHS : Compliant | 0 | |||
| MWDM2L-37P-4E7-60B | Glenair Inc | Connector MIL M | 0 | |||
| MWDM2L-100S-4E7-6B | Glenair Inc | Connector MIL M RoHS : Compliant | 0 | |||
| MWDM2L-15P-4E7-60M | Glenair Inc | Connector | 0 | |||
| MWDM2L-51P-4E7-6B | Glenair Inc | Connector MIL M RoHS : Compliant | 0 | |||
![]() Master Electronics | UE76A205000T | Amphenol Communications Solutions | Conn SFP+ RCP 20 POS Solder RA SMD 20 Terminal 1 Port T/R RoHS : Compliant |
| 1,500 | |
| E76035-000 | TE Connectivity | GILS RoHS : Compliant |
| 17 | ||
| AAE7626-00 | TE Connectivity | 100P3281-1-25-SBTP-08E-L40-1-CHP MOQ Reduction RoHS : Compliant |
| 0 | ||
| FLIR-E76-24-14 | Teledyne FLIR | Exx-Series cameras are the first FLIR models to come with our exclusive Inspection Route Camera Option automatically enabled in the camera. Designed for thermographers who regularly inspect large numbers of objects over the course of a day FLIR Inspection Route guides the user along a pre-defined route of inspection points so they can collect images and data in a structured manner. The route begins in FLIR Thermal Studio Pro software where users build their plan using the Route Creator plugin. RoHS : Compliant |
| 0 | ||
| RP73PF1E76R8BTD | TE Connectivity | RP 1E 0.1W 76R8 0.1% 25PPM 5K RL RoHS : Compliant |
| 0 | ||
| RQ73C1E768RBTDF | TE Connectivity | RQ 0402 768R 0.1% 10PPM 1K RL RoHS : Compliant |
| 0 | ||
| FLIR-E76-DFOV-42-24 | Teledyne FLIR | FLIR E76 ADVANCED THERMAL RoHS : Compliant |
| 0 | ||
| E-760-2 | Thomas & Betts | Steel Channel to Beam Clamp with Galv-Krom Finish - For Structor Channel: B-900 B-905 B-906 B-907. RoHS : Compliant |
| 0 | ||
| FLIR-E76-14-NIST | Teledyne FLIR | Exx-Series cameras are the first FLIR models to come with our exclusive Inspection Route Camera Option automatically enabled in the camera. Designed for thermographers who regularly inspect large numbers of objects over the course of a day FLIR Inspection Route guides the user along a pre-defined route of inspection points so they can collect images and data in a structured manner. The route begins in FLIR Thermal Studio Pro software where users build their plan using the Route Creator plugin. RoHS : Compliant |
| 0 | ||
| FLIR-E76-24-42-NIST | Teledyne FLIR | Exx-Series cameras are the first FLIR models to come with our exclusive Inspection Route Camera Option automatically enabled in the camera. Designed for thermographers who regularly inspect large numbers of objects over the course of a day FLIR Inspection Route guides the user along a pre-defined route of inspection points so they can collect images and data in a structured manner. The route begins in FLIR Thermal Studio Pro software where users build their plan using the Route Creator plugin. RoHS : Compliant |
| 0 | ||
| E76198-000 | TE Connectivity | HX-SCE-38.1-50-4 RoHS : Compliant |
| 0 | ||
| FLIR-E76-24-42 | Teledyne FLIR | Exx-Series cameras are the first FLIR models to come with our exclusive Inspection Route Camera Option automatically enabled in the camera. Designed for thermographers who regularly inspect large numbers of objects over the course of a day FLIR Inspection Route guides the user along a pre-defined route of inspection points so they can collect images and data in a structured manner. The route begins in FLIR Thermal Studio Pro software where users build their plan using the Route Creator plugin. RoHS : Compliant |
| 0 | ||
| E-767 | Thomas & Betts | Steel Channel Support with Galv-Krom finish - Design load 800 lbs. RoHS : Compliant |
| 0 | ||
| E76962-000 | TE Connectivity | 82A1131-26-2/4/6-9 MOQ Reduction RoHS : Compliant |
| 0 | ||
| FLIR-E76-24-NIST | Teledyne FLIR | Exx-Series cameras are the first FLIR models to come with our exclusive Inspection Route Camera Option automatically enabled in the camera. Designed for thermographers who regularly inspect large numbers of objects over the course of a day FLIR Inspection Route guides the user along a pre-defined route of inspection points so they can collect images and data in a structured manner. The route begins in FLIR Thermal Studio Pro software where users build their plan using the Route Creator plugin. RoHS : Compliant |
| 0 | ||
![]() Neutron USA | VP2316BE761MB200 | Norgren | PROP/PRESSURE VALVE ND16 16BA, PRESSURE SWITCHES |
| 4 | |
![]() Pasternack Enterprises US | PE7602-20 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 20 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20dB RF fixed attenuator 2W, DC to 6GHz, SMA male to female, Stainless Steel. The PE7602-20 is a fixed 20 dB attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 20 dB. The Pasternack PE7602-20 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7602-20 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 20 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 14 | |
| PE7602-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 3 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3dB RF fixed attenuator 2W, DC to 6GHz, SMA male to female, Stainless Steel. The PE7602-3 is a fixed 3 dB attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 3 dB. The Pasternack PE7602-3 attenuator is rated for up to 6 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7602-3 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 3 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 13 | ||
| PE7612-1 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 1 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Passivated Stainless Steel, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 1 dB Fixed Attenuator N-Type Male to N-Type Female Passivated Stainless Steel Body Rated 2 Watt DC to 18GHz. PE7612-1 is a 1 dB fixed attenuator from Pasternack. This 1 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 0.8 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with passivated stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 1 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 1 dB. The Pasternack PE7612-1 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentaion, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7612-1 will ship the same business day as purchased from Pasternack’s production facility. This 1 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 7 | ||
| PE7620-8 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 8 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 8 dB Fixed Attenuator SMA Male to SMA Female Passivated Stainless Steel Body Rated 2 Watt DC to 18 GHz. PE7620-8 is a 8 dB fixed attenuator from Pasternack. This 8 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 1 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7620-8 in-series fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 8 dB fixed attenuator has a gold-plated brass inner conductor. This SMA attenuator has a male gender on side 1 and an SMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 8 dB. The Pasternack PE7620-8 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7620-8 will ship the same business day as purchased from Pasternack’s production facility. This 8 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 5 | ||
| PE7601-8 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 3 GHz, Nominal Attenuation: 8 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 8dB RF fixed attenuator 2W, DC to 3GHz, SMA male to female, Stainless Steel. The PE7601-8 is a fixed 8 dB attenuator from Pasternack. This 8 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 8 dB. The Pasternack PE7601-8 attenuator is rated for up to 3 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7601-8 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 8 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 5 | ||
| PE7625-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 3 dB, Attenuation Accuracy, Typ: 0.5 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 5 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: TNC, Connector-In Gender: Male, Connector-Out Series: TNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3 dB Fixed Attenuator TNC Male to TNC Female Black Anodized Aluminum Heatsink Body Rated 5 Watt DC to 18 GHz. PE7625-3 is a 3 dB fixed attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 0.8 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7625-3 in-series fixed attenuator is available with a typical attenuation accuracy of 0.5 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with TNC connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 3 dB fixed attenuator has a gold-plated brass inner conductor. This TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 3 dB. The Pasternack PE7625-3 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The 3 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7625-3 will ship the same business day as purchased from Pasternack’s production facility. This 3 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE7612-6 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 6 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Passivated Stainless Steel, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 6 dB Fixed Attenuator N-Type Male to N-Type Female Passivated Stainless Steel Body Rated 2 Watt DC to 18GHz. PE7612-6 is a 6 dB fixed attenuator from Pasternack. This 6 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 0.8 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with passivated stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 6 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 6 dB. The Pasternack PE7612-6 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentaion, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7612-6 will ship the same business day as purchased from Pasternack’s production facility. This 6 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE7601-1 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 3 GHz, Nominal Attenuation: 1 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 1dB RF fixed attenuator 2W, DC to 3GHz, SMA male to female, Stainless Steel. The PE7601-1 is a fixed 1 dB attenuator from Pasternack. This 1 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 1 dB. The Pasternack PE7601-1 attenuator is rated for up to 3 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7601-1 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 1 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 3 | ||
| PE7606-40 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 40 dB, VSWR, Max: 1.4:1, Input Power, Max (CW): 10 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: TNC, Connector-In Gender: Male, Connector-Out Series: TNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 40dB RF fixed attenuator 10W, DC to 18GHz, TNC male to female. The PE7606-40 is a fixed 40 dB attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 10 Watts. This passive attenuator has a maximum VSWR of 1.4:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with TNC connectors is constructed with black anodized aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 40 dB. The Pasternack PE7606-40 attenuator is rated for up to 18 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a black anodized aluminum TNC connector with gold-plated brass contact. Our fixed RF attenuator PE7606-40 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 40 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7630-10 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 10 dB, Attenuation Accuracy, Typ: 1.5 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 50 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: TNC, Connector-In Gender: Male, Connector-Out Series: TNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 10 dB Fixed Attenuator, TNC Male to TNC Female Black Anodized Aluminum Body Rated to 50 Watts Up to 18 GHz. PE7630-10 is a 10 dB fixed attenuator from Pasternack. This 10 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7630-10 in-series fixed attenuator is available with a typical attenuation accuracy of 1.5 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with TNC connectors is constructed with black anodized aluminum body material. The connectorized directional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 10 dB fixed attenuator has a gold-plated brass inner conductor. This TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 10 dB. The Pasternack PE7630-10 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The 10 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7630-10 will ship the same business day as purchased from Pasternack’s production facility. This 10 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 2 | ||
| PE7628-40 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 6 GHz, Nominal Attenuation: 40 dB, Attenuation Accuracy, Typ: 0.8 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 50 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: TNC, Connector-In Gender: Male, Connector-Out Series: TNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 40 dB Fixed Attenuator, TNC Male to TNC Female Black Anodized Aluminum Body Rated to 50 Watts Up to 6 GHz. PE7628-40 is a 40 dB fixed attenuator from Pasternack. This 40 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7628-40 in-series fixed attenuator is available with a typical attenuation accuracy of 0.8 dB. The max input power rating (CW) of this RF attenuator is 50 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with TNC connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 40 dB. The Pasternack PE7628-40 attenuator is rated for maximum frequency up to 6 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The 40 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7628-40 will ship the same business day as purchased from Pasternack’s production facility. This 40 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE7606-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 3 dB, VSWR, Max: 1.4:1, Input Power, Max (CW): 10 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: TNC, Connector-In Gender: Male, Connector-Out Series: TNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3dB RF fixed attenuator 10W, DC to 18GHz, TNC male to female. The PE7606-3 is a fixed 3 dB attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 10 Watts. This passive attenuator has a maximum VSWR of 1.4:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with TNC connectors is constructed with black anodized aluminum body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 3 dB. The Pasternack PE7606-3 attenuator is rated for up to 18 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a black anodized aluminum TNC connector with gold-plated brass contact. Our fixed RF attenuator PE7606-3 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 3 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE7624-30 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 30 dB, Attenuation Accuracy, Typ: 1 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 5 Watts, Body Material: Black Anodized Aluminum, Connector-In Series: N, Connector-In Gender: Male, Connector-Out Series: N, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator N-Type Male to N-Type Female Black Anodized Aluminum Heatsink Body Rated 5 Watt DC to 18 GHz. PE7624-30 is a 30 dB fixed attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. Pasternack’s PE7624-30 in-series fixed attenuator is available with a typical attenuation accuracy of 1 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with N-type connectors is constructed with black anodized aluminum body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated brass inner conductor. This N-type attenuator has a male gender on side 1 and a N-type female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 30 dB. The Pasternack PE7624-30 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization and production systems applications. The 30 dB attenuator has a brass connector built with nickel plating. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7624-30 will ship the same business day as purchased from Pasternack’s production facility. This 30 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 1 | ||
| PE7601-3 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connector-In Impedance: 50 Ohms, Max Freq: 3 GHz, Nominal Attenuation: 3 dB, VSWR, Max: 1.15:1, Input Power, Max (CW): 2 Watts, Body Material: Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 3dB RF fixed attenuator 2W, DC to 3GHz, SMA male to female, Stainless Steel. The PE7601-3 is a fixed 3 dB attenuator from Pasternack. This 3 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. The max input power rating (CW) of this RF attenuator is 2 Watts. This passive attenuator has a maximum VSWR of 1.15:1 and operates between -55 and 125 deg C. Our radio frequency attenuator with SMA connectors is constructed with stainless steel body material. The bidirectional attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This SMA attenuator has a male gender on side 1 and a SMA female connector on side 2. Our RF attenuator is rated for a maximum attenuation value of 3 dB. The Pasternack PE7601-3 attenuator is rated for up to 3 GHz. This coaxial attenuator is also suitable for precision measurements, production systems, instrumentation and prototyping and characterization applications. The attenuator has a stainless steel SMA connector with gold-plated brass contact. Our fixed RF attenuator PE7601-3 is shipped same-day as purchased from Pasternack's production facility, which is certified to ISO 9001:2015. This 3 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
| PE7611-30 | Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Max Freq: 18 GHz, Nominal Attenuation: 30 dB, VSWR, Max: 1.3:1, Input Power, Max (CW): 2 Watts, Body Material: Passivated Stainless Steel, Connector-In Series: SMA, Connector-In Gender: Male, Connector-Out Series: SMA, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 30 dB Fixed Attenuator SMA Male to SMA Female Passivated Stainless Steel Body Rated 2 Watt DC to 18GHz. PE7611-30 is a 30 dB fixed attenuator from Pasternack. This 30 dB attenuator is an in-line, resistive PI attenuator pad design. This connectorized RF attenuator comes with a maximum attenuation accuracy of 1 dB. Our in-series coaxial 50 Ohm attenuator is manufactured to precise RF/microwave industry specifications. This passive RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers and detectors. Make your online purchase right now to take advantage of our same-business-day shipping. The max input power rating (CW) of this RF attenuator is 2 Watts. This attenuator has a maximum VSWR of 1.3:1 and operates between -55 and 125 deg C. Our fixed radio frequency attenuator with SMA connectors is constructed with passivated stainless steel body material. The connectorized bidirectional fixed attenuator is the best solution for reducing the power levels of a signal by a fixed amount with little or no reflections. This 30 dB fixed attenuator has a gold-plated beryllium copper inner conductor. This SMA attenuator has a male gender on side 1 and an SMA female connector on side 2. Our RF attenuator is rated for a nominal attenuation value of 30 dB. The Pasternack PE7611-30 attenuator is rated for maximum frequency up to 18 GHz. This fixed coaxial attenuator is suitable for instrumentaion, precision measurements, prototyping and characterization and production systems applications. Additional dimensions, specifications, and CAD drawings for this RF attenuator are available on our downloadable PDF datasheet. Our fixed RF attenuator PE7611-30 will ship the same business day as purchased from Pasternack’s production facility. This 30 dB attenuator is part of over one million RF, microwave and millimeter wave products that ship the same business day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal fixed attenuator that meets your requirements. |
| 0 | ||
![]() TE Connectivity | RP73PF1E76K8BTD | TE Connectivity | RP 1E 0.1W 76K8 0.1% 25PPM 5K RL Resistance Value: 76.8K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 76.8K Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1E76K8BTD | Internal Number: 7-2176307-7 | TE Connectivity RoHS : Compliant |
| 13,127 | |
| RQ73C1E768RBTD | TE Connectivity | RQ 0402 768R 0.1% 10PPM 5K RL Resistance Value: 768 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 768 Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C1E768RBTD | Internal Number: 2-2176363-5 | TE Connectivity RoHS : Compliant |
| 9,152 | ||
| RQ73C1E76R8BTD | TE Connectivity | RQ 0402 76R8 0.1% 10PPM 5K RL Resistance Value: 76.8 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 76.8 Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C1E76R8BTD | Internal Number: 2-2176362-8 | TE Connectivity RoHS : Compliant |
| 7,652 | ||
| RP73PF1E768RBTD | TE Connectivity | RP 1E 0.1W 768R 0.1% 25PPM 5K RL Resistance Value: 768 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 768 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1E768RBTD | Internal Number: 8-2176305-3 | TE Connectivity RoHS : Compliant |
| 6,505 | ||
| RP73PF1E76R8BTD | TE Connectivity | RP 1E 0.1W 76R8 0.1% 25PPM 5K RL Resistance Value: 76.8 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0402 Surface Mount Resistor | 76.8 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF1E76R8BTD | Internal Number: 8-2176304-6 | TE Connectivity RoHS : Compliant |
| 4,349 | ||
![]() Venkel Ltd. | MELFC0102-RE-7681FT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�25PPM;7.68K;�1% RoHS : Compliant | 0 | ||
| MELFC0207-XE-7681FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�25PPM;7.68K;�1% RoHS : Compliant | 0 | |||
| MELFC0207-XE-76R8CT | VENKEL LTD | MELF Coated Thin Film CR;0207;1W;�25PPM;76.8R;�0.25% RoHS : Compliant | 0 | |||
| MELFM0204-ZE-76R8FT | VENKEL LTD | MELF Molded Thin Film CR;0204;2/5W;�25PPM;76.8R;�1% RoHS : Not Compliant | 0 | |||
| MELFM0207-XE-7680CT | VENKEL LTD | MELF Molded Thin Film CR;0207;1W;�25PPM;768R;�0.25% RoHS : Not Compliant | 0 | |||
| UPTF0603-16W-E-76R8AT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�25PPM;76.8R;�0.05% RoHS : Compliant | 0 | |||
| UPTF2512-2W-E-7681AT | VENKEL LTD | Ultra Precision Thin Film CR;2512;1/2W;�25PPM;7.68K;�0.05% RoHS : Compliant | 0 | |||
| TFCR0402-16W-E-7680FT-1K | VENKEL LTD | Thin Film CR;0402;1/16W;�25PPM;768R;�1% RoHS : Compliant | 0 | |||
| TFCR0805-10W-E-7680BT | VENKEL LTD | Thin Film CR;0805;1/10W;�25PPM;768R;�0.1% RoHS : Compliant | 0 | |||
| TFCR0805-10W-E-7682CT-1K | VENKEL LTD | Thin Film CR;0805;1/10W;�25PPM;76.8K;�0.25% RoHS : Compliant | 0 | |||
| TFCR0805-8W-E-7681CT-1K | VENKEL LTD | Thin Film CR;0805;1/8W;�25PPM;7.68K;�0.25% RoHS : Compliant | 0 | |||
| TFCR1206-8W-E-7681BT | VENKEL LTD | Thin Film CR;1206;1/8W;�25PPM;7.68K;�0.1% RoHS : Compliant | 0 | |||
| TFCR1210-4W-E-7680BT | VENKEL LTD | Thin Film CR;1210;1/4W;�25PPM;768R;�0.1% RoHS : Compliant | 0 | |||
| HPTF1210-UE-7683CT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�25PPM;768K ;�0.25% RoHS : Compliant | 0 | |||
| HPTF2512-WE-7680DT | VENKEL LTD | High Power Thin Film CR;2512;3/4W;�25PPM;768R;�0.5% RoHS : Compliant | 0 | |||
![]() Vyrian | MT53E768M64D4SQ-046WT:A | Micron Technology Inc | LPDDR4 DRAM RoHS : Compliant | 7,092 | ||
| MT53E768M64D4HJ-046AUT:B | Micron Technology Inc | LPDDR4 DRAM RoHS : Compliant | 6,892 | |||
| MT29E768G08EEHBBJ4-3-B-TR | Micron Technology Inc | 6,149 | ||||
| MT53E768M32D2FW-046WT:C | Micron Technology Inc | LPDDR4 DRAM RoHS : Compliant | 5,850 | |||
| MT53E768M32D4DT-046AAT:E | Micron Technology Inc | LPDDR4 DRAM, 768MX32, CMOS, PBGA200 RoHS : Compliant | 5,681 | |||
| MT53E768M32D4DT-053AUT:E | Micron Technology Inc | LPDDR4 DRAM, 768MX32, CMOS, PBGA200 RoHS : Compliant | 5,672 | |||
| MT53E768M32D4DT-046AIT:E | Micron Technology Inc | LPDDR4 DRAM, 768MX32, CMOS, PBGA200 RoHS : Compliant | 4,663 | |||
| MT53E768M64D4HJ-046AAT:A | Micron Technology Inc | LPDDR4 DRAM, 768MX64, 3.5ns, CMOS, PBGA556 RoHS : Compliant | 4,312 | |||
| MT53E768M64D4SQ-046AWT:A | Micron Technology Inc | LPDDR4 DRAM RoHS : Compliant | 4,033 | |||
| MT53E768M32D2FW-046-AAT-C | Micron Technology Inc | 3,968 | ||||
| MT53E768M32D2NP-053-RS-WT-B-TR | Micron Technology Inc | 3,441 | ||||
| MT53E768M32D2FW-046-WT-C-TR | Micron Technology Inc | 3,313 | ||||
| MT53E768M32D4DE-046AUT:E | Micron Technology Inc | LPDDR4 DRAM, 768MX32, CMOS, PBGA200 RoHS : Compliant | 3,099 | |||
| MT53E768M32D2FW-046-AIT-C-TR | Micron Technology Inc | 3,003 | ||||
| MT53E768M64D4SQ-046-AIT-A-TR | Micron Technology Inc | 2,398 | ||||
![]() Win Source Electronics | UE76-3GA20-3600T | Amphenol Corporation | CONN SFP RCPT 20POS SLD R/A SMD / 20 Position SFP Receptacle Connector Solder Surface Mount, Right Angle RoHS : Compliant |
| 55,176 | |
| 20455-040E-76 | I-PEX Co Ltd | CABLINE-VS RECEPTACLE 40P / 40 Position FPC Connector Contacts, Top 0.020" (0.50mm) Surface Mount, Right Angle RoHS : Compliant |
| 25,535 | ||
| 20455-050E-76 | I-PEX Co Ltd | 76 Position FFC - FPC Receptacle Assembly RoHS : Compliant |
| 20,000 | ||
| 20455-030E-76 | I-PEX Co Ltd | CABLINE-VS RECE 30P / Position Connector RoHS : Compliant |
| 9,880 | ||
| MT53E768M32D4DT-053 WT:E | Micron Technology Inc | IC DRAM 24GBIT 1.866GHZ 200VFBGA |
| 1,700 | ||
| MT53E768M32D4DT-053 AIT:E | Micron Technology Inc | IC DRAM 24GBIT 1.866GHZ 200VFBGA |
| 1,300 | ||
| MT53E768M32D4DT-046 AIT:E | Micron Technology Inc | IC DRAM 24GBIT 2.133GHZ 200VFBGA |
| 520 | ||
AFE7686IABJ![]() | Texas Instruments | IC AFE 4 CHAN 14BIT 400FCBGA / 4 Channel AFE 14 Bit 400-FCBGA (17x17) RoHS : Compliant |
| 500 | ||
| AFE7689IABJ | Texas Instruments | PROTOTYPE |
| 200 | ||
AFE7683IABJ![]() | Texas Instruments | ANALOG FRONT END / 4 Channel AFE 14 Bit 400-FCBGA (17x17) RoHS : Compliant |
| 150 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |