| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow |
 TME | ACC-NRS-M6X50-FHS-2PCS
| Schmersal | Replacement screws; AZM 300 | | 16
 |
ACC-NRS-M6X20-FHS-2PCS
| Schmersal | Replacement screws; AZM 300 | | 13
 |
ACC-NRS-M4X8-FHS-2PCS
| Schmersal | Replacement screws; AZ 17 / AZM 170; Kit: screw x2 | | 5
 |
ACC-NRS-M6X70-FHS-2PCS
| Schmersal | Replacement screws; AZM 300 | | 0
 |
ACC-NRS-M6X16-FHS-2PCS
| Schmersal | Replacement screws; AZM 300 | | 0
 |
 Verical | FHS-256-5
| PennEngineering (PEM) | Studs Self Clinching Stainless Steel Passivated ASTM A380 8.56mm 2-56 | 5,000 : $0.1007 1,000 : $0.1497 500 : $0.2939 250 : $0.5289 100 : $0.8635 33 : $2.199
|
| 17,669
 |
FHS-256-4
| PennEngineering (PEM) | Studs Self Clinching Stainless Steel Passivated ASTM A380 6.35mm 2-56 | 5,000 : $0.1119 2,500 : $0.1146 1,000 : $0.1175 500 : $0.1878 250 : $0.5023 100 : $0.8774 55 : $1.2459 39 : $1.8049 18 : $4.0363 6 : $13.8876
|
| 10,791
 |
FHS-256-6
| PennEngineering (PEM) | Studs Self Clinching Stainless Steel Passivated ASTM A380 9.53mm 2-56 | 5,000 : $0.0942 2,500 : $0.0965 1,000 : $0.0989 500 : $0.3092 250 : $0.4492 116 : $0.5767 70 : $0.9718 25 : $3.0964 11 : $6.5424 7 : $11.1981
|
| 9,500
 |
FHS-256-12
| PennEngineering (PEM) | Studs Self Clinching Stainless Steel Passivated ASTM A380 19.05mm 2-56 | 2,500 : $0.255 1,000 : $0.2625 281 : $0.2705 100 : $0.9871 66 : $1.2256
|
| 4,906
 |
FHS-256-12
| PennEngineering (PEM) | Studs Self Clinching Stainless Steel Passivated ASTM A380 19.05mm 2-56 | 1,000 : $0.2625 281 : $0.2705 100 : $0.9871 66 : $1.2256
|
| 1,463
 |
FHS-256-6
| PennEngineering (PEM) | Studs Self Clinching Stainless Steel Passivated ASTM A380 9.53mm 2-56 | 500 : $0.3092 250 : $0.4492 116 : $0.5767 70 : $0.9718 25 : $3.0964 11 : $6.5424 7 : $11.1981
|
| 985
 |
FHS-256-6
| PennEngineering (PEM) | Studs Self Clinching Stainless Steel Passivated ASTM A380 9.53mm 2-56 | 116 : $0.5767 70 : $0.9718 25 : $3.0964 11 : $6.5424 7 : $11.1981
|
| 182
 |
FHS-256-8
| PennEngineering (PEM) | Studs Self Clinching 2-56-THD 0.5in-LG Stainless Steel 300 Passivated ASTM A380 | 100 : $0.758 62 : $1.1493 48 : $1.5374
|
| 151
 |
FHS-256-4
| PennEngineering (PEM) | Studs Self Clinching Stainless Steel Passivated ASTM A380 6.35mm 2-56 | 100 : $0.8774 55 : $1.2459 39 : $1.8049 18 : $4.0363 6 : $13.8876
|
| 129
 |
FHS-256-5
| PennEngineering (PEM) | Studs Self Clinching Stainless Steel Passivated ASTM A380 8.56mm 2-56 | | 79
 |
FHS-256-10
| PennEngineering (PEM) | Studs Self Clinching Stainless Steel Passivated ASTM A380 15.88mm 2-56 | | 38
 |
FHS-256-6
| PennEngineering (PEM) | Studs Self Clinching Stainless Steel Passivated ASTM A380 9.53mm 2-56 | 25 : $3.0964 11 : $6.5424 7 : $11.1981
|
| 30
 |
 Mouser Electronics | FHS-256-4
| PennEngineering (PEM) | Screws & Fasteners STUD, FLUSH, STAINLESS RoHS : Compliant | 1 : $0.24 10 : $0.177 25 : $0.161 50 : $0.15 100 : $0.14 250 : $0.128 500 : $0.127 1,000 : $0.107
|
| 2,818
 |
FHS-256-6
| PennEngineering (PEM) | Screws & Fasteners STUD, FLUSH, STAINLESS RoHS : Compliant | 1 : $0.25 10 : $0.188 25 : $0.17 50 : $0.159 100 : $0.148 250 : $0.136 500 : $0.135 1,000 : $0.113
|
| 2,000
 |
FHS-256-8
| PennEngineering (PEM) | Screws & Fasteners STUD, FLUSH, STAINLESS RoHS : Compliant | 1 : $0.26 10 : $0.195 25 : $0.177 50 : $0.165 100 : $0.154 250 : $0.141 500 : $0.14 1,000 : $0.118
|
| 0
 |
FHS-256-5
| PennEngineering (PEM) | Screws & Fasteners STUD, FLUSH, STAINLESS RoHS : Compliant | | 0
 |
FHS-256-10
| PennEngineering (PEM) | Screws & Fasteners STUD, FLUSH, STAINLESS RoHS : Compliant | | 0
 |
FHS-256-12
| PennEngineering (PEM) | Screws & Fasteners STUD, FLUSH, STAINLESS RoHS : Compliant | | 0
 |
FHS-207-8
| PennEngineering (PEM) | Screws & Fasteners PIN, FLUSH, STAINLESS RoHS : Compliant | | 0
 |
FHS-223-8
| PennEngineering (PEM) | Screws & Fasteners PIN, FLUSH, STAINLESS RoHS : Compliant | | 0
 |
FHS-215-8
| PennEngineering (PEM) | Screws & Fasteners RoHS : Compliant | | 0
 |
FHS-207-10
| PennEngineering (PEM) | Screws & Fasteners RoHS : Compliant | | 0
 |
FHS-223-10
| PennEngineering (PEM) | Screws & Fasteners RoHS : Compliant | | 0
 |
FHS-215-10
| PennEngineering (PEM) | Screws & Fasteners RoHS : Compliant | | 0
 |
FHS-207-12
| PennEngineering (PEM) | Screws & Fasteners RoHS : Compliant | | 0
 |
FHS-215-12
| PennEngineering (PEM) | Screws & Fasteners RoHS : Compliant | | 0
 |
FHS-223-12
| PennEngineering (PEM) | Screws & Fasteners PIN, FLUSH, STAINLESS RoHS : Compliant | | 0
 |
 Newark | FHS-2
| Omega Engineering | Finned Heat Sink, 1.2 Deg C/W; |Omega FHS-2 RoHS : Compliant | | 0
 |
 RS | FHS202-15MM (PER.FHS202)
| PEER Bearing Company | AGRICULTURE BEARINGS, ADVANCED SEALING, LONG-LASTING PERFORMANCE | | 8
 |
FHS201-8 (PER.FHS201-8)
| PEER Bearing Company | PEER AGRICULTURE (AG) | | 0
 |
FHS210-50MM (PER.FHS210)
| PEER Bearing Company | PEER AGRICULTURE (AG) | | 0
 |
FHS205-25MM (PER.FHS205)
| PEER Bearing Company | PEER AGRICULTURE (AG) | | 0
 |
FHS206-30MM (PER.FHS206)
| PEER Bearing Company | PEER AGRICULTURE (AG) | | 0
 |
FHS208-40MM (PER.FHS208)
| PEER Bearing Company | PEER AGRICULTURE (AG) | | 0
 |
FHS207-20 (PER.FHS207-20)
| PEER Bearing Company | PEER AGRICULTURE (AG) | | 0
 |
FHS208-24 (PER.FHS208-24)
| PEER Bearing Company | PEER AGRICULTURE (AG) | | 0
 |
FHS206-20 (PER.FHS206-20)
| PEER Bearing Company | INSERT BEARING, ECCENTRIC LOCKING COLLAR | | 0
 |
FHS205-14 (PER.FHS205-14)
| PEER Bearing Company | PEER AGRICULTURE (AG) | | 0
 |
FHS206-18 (PER.FHS206-18)
| PEER Bearing Company | PEER AGRICULTURE (AG) | | 0
 |
FHS205-16 (PER.FHS205-16)
| PEER Bearing Company | INSERT BEARING, ECCENTRIC LOCKING COLLAR | | 0
 |
FHS207-22 (PER.FHS207-22)
| PEER Bearing Company | PEER AGRICULTURE (AG) | | 0
 |
FHS205-12 (PER.FHS205-12)
| PEER Bearing Company | PEER AGRICULTURE (AG) | | 0
 |
FHS202-10 (PER.FHS202-10)
| PEER Bearing Company | PEER AGRICULTURE (AG) | | 0
 |
 Onlinecomponents.com | FHS24
| Russell Industries Inc | RoHS : Compliant | | 1
 |
FHS2510
| B&K Precision Corporation | Replacement Hand Strap with Connecting Hooks for 2510 Series RoHS : Compliant | | 0
 |
 Chip 1 Exchange | FHS200V224J420
| | INSTOCK | | 8,000
 |
FHS 200V 124J 420
| | INSTOCK | | 4,000
 |
FHS 200V 244J 420
| | INSTOCK | | 3,550
 |
 Component Electronics, Inc | FHS256X3/16-PH-SS
| PennEngineering (PEM) | IN STOCK SHIP TODAY | 1,000 : $0.06 100 : $0.07 1 : $0.09
|
| 8,600
 |
FHS256X5/16-PH-SS
| | IN STOCK SHIP TODAY | | 950
 |
FHS256X5/16-PH-SS
| PennEngineering (PEM) | IN STOCK SHIP TODAY | | 900
 |
 DB Roberts | FHS256X3/16-PH-SS
| FLAT HEAD MACHINE S | Flat Head Machine Screw | 1 : $0.2632 100 : $0.1316 500 : $0.0752 1,000 : $0.031 5,000 : $0.0195
|
| 34,359
 |
FHS-256-4
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | 1 : $0.0955 100 : $0.0878 500 : $0.0771 1,000 : $0.0732 5,000 : $0.0714
|
| 26,322
 |
FHS-256-10
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | 1 : $0.1177 100 : $0.1087 500 : $0.0951 1,000 : $0.0906 5,000 : $0.0878
|
| 17,364
 |
FHS-223-8
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | 1 : $0.3506 100 : $0.3155 500 : $0.2805 1,000 : $0.2542 5,000 : $0.2542
|
| 17,337
 |
FHS-256-8-D
| PennEngineering (PEM) | STUD, FLUSH, STAINLESS DFARS COMPLIANT REQUIRED | 1 : $0.2485 100 : $0.1747 500 : $0.1375 1,000 : $0.1134 1,850 : $0.1134
|
| 1,850
 |
FHS256X5/8-PH-SS
| FLAT HEAD MACHINE S | Flat Head Machine Screw | 1 : $0.3584 100 : $0.1792 500 : $0.1024 1,000 : $0.0422 1,483 : $0.0422
|
| 1,483
 |
FHS-256-4.D
| PennEngineering (PEM) | STUD, FLUSH, STAINLESS DFARS COMPLIANT REQUIRED | | 8
 |
FHS-215-10
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | | 0
 |
FHS-273-16
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | | 0
 |
FHS-273-14
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | | 0
 |
FHS-273-20
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | | 0
 |
FHS-223-24
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | | 0
 |
FHS-207-20
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | | 0
 |
FHS-215-14
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | | 0
 |
TFHS-256-12
| PennEngineering (PEM) | PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly | | 0
 |
 Master Electronics | BUT-3FHS-25
| SR Components Inc | Butt Connector 12-10 AWG Hea RoHS : Compliant | 500 : $12.59 250 : $12.67 100 : $12.83 50 : $13.19 25 : $13.38 10 : $13.59 5 : $13.92 1 : $15.312
|
| 4
 |
BUT-2FHS-25
| SR Components Inc | 14 to 16 AWG WIRE INSULATED BUTT CRIMP CONNECTOR WITH HEAT SHRINKABLE TUBING-PACK OF 25 RoHS : Compliant | 1,000 : $8.98 500 : $9.03 250 : $9.15 100 : $9.34 50 : $9.54 25 : $9.76 5 : $10.28 1 : $11.308
|
| 1
 |
 Pasternack Enterprises US | PE3W18136LF/HS-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-FR, RF Cable Type: LMR-240-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Right Angle Low Loss Cable 24 Inch Length Using LMR-240-FR Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male right angle low loss cable 24 inch length using LMR-240-FR coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 24 inch length using LMR-240-FR coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W18136LF/HS-24 can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18136LF/HS-24 RF cable has a FRPE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W18136LF/HS-24 is built with LMR-240-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18136LF/HS-24 can also be used in the other direction and will be a right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $141.99 25 : $134.89 50 : $127.79 100 : $122.11
|
| 988
 |
PE3C2279LF/HS-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200-UF, RF Cable Type: LMR-200-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to SMA Male Low Loss Cable 24 Inch Length Using LMR-200-UF Coax with Times Microwave Components with HeatShrink, LF Solder., Radio frequency assembly N male to SMA male low loss cable 24 inch length using LMR-200-UF coax with Times Microwave components with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to SMA male low loss cable 24 inch length using LMR-200-UF coax with Times Microwave components with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a SMA cable connection on the other. Our low loss type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C2279LF/HS-24 can also be known as a low loss type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2279LF/HS-24 RF cable has a TPE jacket of 0.195-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Type N plug to SMA plug cable assembly PE3C2279LF/HS-24 is built with LMR-200-UF which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2279LF/HS-24 can also be used in the other direction and will be a SMA male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $111.99 10 : $109.75 25 : $107.51 100 : $105.27
|
| 426
 |
PE3C0119LF/HS-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male Right Angle to N Male Right Angle Low Loss Cable 24 Inch Length Using LMR-195 Coax With Times Microwave Components, LF Solder., Radio frequency assembly N male right angle to N male right angle low loss cable 24 inch length using LMR-195 coax with Times Microwave components, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male right angle low loss cable 24 inch length using LMR-195 coax with Times Microwave components, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle N type cable connection on one end and right angle type N cable connection on the other. Our low loss right angle N type to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0119LF/HS-24 can also be known as a low loss right angle type N plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C0119LF/HS-24 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type right angle male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type right angle plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N male right angle low loss cable 24 inch length using LMR-195 coax with Times Microwave components, LF solder. | 1 : $109.99 25 : $104.49 50 : $98.99 100 : $94.59
|
| 127
 |
PE3899LF/HS2-12
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm, Length, Max: 12 inches. SMA Male to SMA Male Cable 12 Inch Length Using 93 Ohm RG62 Coax with Double HeatShrink., Radio frequency assembly SMA male to SMA male cable 12 inch length using 93 Ohm RG62 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 12 inch length using 93 Ohm RG62 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3899LF/HS2-12 can also be known as a SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3899LF/HS2-12 is built with RG62 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male cable 12 inch length using 93 Ohm RG62 coax with double heatshrink. | 1 : $156.99 25 : $149.14 50 : $141.29 100 : $135.01
|
| 54
 |
PE3496LF/HS2
| Pasternack Enterprises | | | 0
 |
PE3W05173LF/HS-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to Push-On SMP Female Right Angle Low Loss Cable 24 Inch Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to push-on SMP female right angle low loss cable 24 inch length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to push-on SMP female right angle low loss cable 24 inch length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle SMP cable connection on the other. Our low loss SMA to right angle SMP cable assembly has a male gender on end 1 and a female on end 2. PE3W05173LF/HS-24 can also be known as a low loss SMA plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W05173LF/HS-24 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our SMA male to right angle SMP female cable has a maximum VSWR of 1.4:1. SMA plug to SMP jack cable assembly PE3W05173LF/HS-24 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W05173LF/HS-24 can also be used in the other direction and will be a right angle SMP female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMP low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $73.89 25 : $70.2 50 : $66.5 100 : $63.55
|
| 0
 |
PE3W07180LF/HS-200CM
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. TNC Male to SMA Male Low Loss Cable 200 CM Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly TNC male to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to SMA male low loss cable 200 cm length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a SMA cable connection on the other. Our low loss TNC to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W07180LF/HS-200CM can also be known as a low loss TNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W07180LF/HS-200CM RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our TNC male to SMA male cable has a maximum VSWR of 1.4:1. TNC plug to SMA plug cable assembly PE3W07180LF/HS-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W07180LF/HS-200CM can also be used in the other direction and will be a SMA male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $72.79 25 : $69.15 50 : $65.51 100 : $62.6
|
| 0
 |
PE3W16757LF/HS-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-UF, RF Cable Type: LMR-100A-UF, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Male to SMA Male Low Loss Cable 24 Inch Length Using LMR-100A-UF Coax with HeatShrink, LF Solder., Radio frequency assembly BNC male to SMA male low loss cable 24 inch length using LMR-100A-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to SMA male low loss cable 24 inch length using LMR-100A-UF coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a SMA cable connection on the other. Our low loss BNC to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W16757LF/HS-24 can also be known as a low loss BNC plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W16757LF/HS-24 RF cable has a TPE jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our BNC male to SMA male cable has a maximum VSWR of 1.4:1. BNC plug to SMA plug cable assembly PE3W16757LF/HS-24 is built with LMR-100A-UF which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W16757LF/HS-24 can also be used in the other direction and will be a SMA male to BNC male cable assembly if the opposite connectivity is required. Low loss BNC plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $79.19 25 : $75.23 50 : $71.27 100 : $68.1
|
| 0
 |
PE3573LF/HS-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male to SMA Male Cable 24 Inch Length Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male cable 24 inch length using RG316 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male cable 24 inch length using RG316 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3573LF/HS-24 can also be known as a SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3573LF/HS-24 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has an in-series connection. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3573LF/HS-24 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA RF cable assembly as per your requirements. | 1 : $87.79 25 : $83.4 50 : $79.01 100 : $75.5
|
| 0
 |
PE36638LF/HS-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. MCX Plug Right Angle to N Female Bulkhead Cable 24 Inch Length Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly MCX plug right angle to N female bulkhead cable 24 inch length using RG316 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug right angle to N female bulkhead cable 24 inch length using RG316 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MCX to type N cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle MCX cable connection on one end and a type N bulkhead cable connection on the other. Our right angle MCX to type N cable assembly has a plug gender on end 1 and a female on end 2. PE36638LF/HS-24 can also be known as a right angle MCX male to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE36638LF/HS-24 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. Our right angle MCX plug to bulkhead type N female cable has a maximum VSWR of 1.4:1. MCX male to type N jack cable assembly PE36638LF/HS-24 is built with RG316 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to type N cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE36638LF/HS-24 can also be used in the other direction and will be a type N female bulkhead to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to type N jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MCX to type N cable assembly for quick shipment worldwide. Variations of MCX and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX to type N RF cable assembly as per your requirements. | 1 : $99.59 25 : $94.61 50 : $89.63 100 : $85.65
|
| 0
 |
PE3W03244LF/HS-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to 7/16 DIN Male Right Angle Low Loss Cable 24 Inch Length Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to 7/16 DIN male right angle low loss cable 24 inch length using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 7/16 DIN male right angle low loss cable 24 inch length using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 7/16 DIN cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle 7/16 DIN cable connection on the other. Our low loss type N to right angle 7/16 DIN cable assembly has a male gender on end 1 and a male on end 2. PE3W03244LF/HS-24 can also be known as a low loss type N plug to right angle 7/16 DIN plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03244LF/HS-24 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle 7/16 DIN male cable has a maximum VSWR of 1.4:1. Type N plug to 7/16 DIN plug cable assembly PE3W03244LF/HS-24 is built with LMR-400 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03244LF/HS-24 can also be used in the other direction and will be a right angle 7/16 DIN male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 7/16 DIN right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 7/16 DIN cable assembly for quick shipment worldwide. Variations of type N and 7/16 DIN cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 7/16 DIN low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $126.99 25 : $120.64 50 : $114.29 100 : $109.21
|
| 0
 |
PE3W08074LF/HS-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. BNC Male to Push-On SMP Female Right Angle Cable 24 Inch Length Using RG316 Coax with HeatShrink, LF Solder., Radio frequency assembly BNC male to push-on SMP female right angle cable 24 inch length using RG316 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to push-on SMP female right angle cable 24 inch length using RG316 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a right angle SMP cable connection on the other. Our BNC to right angle SMP cable assembly has a male gender on end 1 and a female on end 2. PE3W08074LF/HS-24 can also be known as a BNC plug to right angle SMP jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3W08074LF/HS-24 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our BNC male to right angle SMP female cable has a maximum VSWR of 1.4:1. BNC plug to SMP jack cable assembly PE3W08074LF/HS-24 is built with RG316 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to right angle SMP cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W08074LF/HS-24 can also be used in the other direction and will be a right angle SMP female to BNC male cable assembly if the opposite connectivity is required. BNC plug to SMP right angle jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMP cable assembly for quick shipment worldwide. Variations of BNC and SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMP RF cable assembly as per your requirements. | 1 : $70.69 25 : $67.16 50 : $63.62 100 : $60.79
|
| 0
 |
PE3W08234LF/HS-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: HN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: PE-C195, RF Cable Type: PE-C195, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female to HN Male Low Loss Cable 24 Inch Length Using PE-C195 Coax with HeatShrink, LF Solder., Radio frequency assembly N female to HN male low loss cable 24 inch length using PE-C195 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female to HN male low loss cable 24 inch length using PE-C195 coax with heatshrink, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to HN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and HN cable connection on the other. Our low loss N type to HN cable assemblies have a female gender on end 1 and male on end 2. This N type to HN cable is a female to male coax assembly, PE3W08234LF/HS-24, can also be known as a low loss type N jack to HN plug cable assembly and will be shipped same-day as it is purchased. Type N jack to HN plug cable assembly PE3W08234LF/HS-24 is built with PE-C195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to HN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this type N female to HN male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08234LF/HS-24 can also be used in the other direction and will be HN male to type N female cable assembly if the opposite connectivity is required. Low loss type N jack to HN plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to HN cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to HN male low loss cable 24 inch length using PE-C195 coax with heatshrink, LF solder. | 1 : $169.99 25 : $161.49 50 : $152.99 100 : $146.19
|
| 0
 |
PE3C0957LF/HS-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. TNC Female RA Bulkhead to TNC Female RA Bulkhead Low Loss Cable 24 Inch Length Using LMR-200 Coax with HeatShrink, LF Solder., Radio frequency assembly TNC female RA bulkhead to TNC female RA bulkhead low loss cable 24 inch length using LMR-200 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC female RA bulkhead to TNC female RA bulkhead low loss cable 24 inch length using LMR-200 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle TNC bulkhead cable connection on one end and a right angle TNC bulkhead cable connection on the other. Our low loss right angle TNC to right angle TNC cable assembly has a female gender on end 1 and a female on end 2. PE3C0957LF/HS-24 can also be known as a low loss right angle TNC jack to right angle TNC jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0957LF/HS-24 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle bulkhead TNC female to right angle bulkhead TNC female cable has a maximum VSWR of 1.4:1. TNC jack to TNC jack cable assembly PE3C0957LF/HS-24 is built with LMR-200 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss TNC right angle jack bulkhead to TNC right angle jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $160.99 10 : $154.55 25 : $148.11 100 : $141.67
|
| 0
 |
PE3W12590LF/HS-24
| Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400-FR, RF Cable Type: LMR-400-FR, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. Fire Rated N Male to N Male Right Angle Low Loss Cable 24 Inch Length Using LMR-400-FR Coax with HeatShrink, LF Solder., Radio frequency assembly fire rated N male to N male right angle low loss cable 24 inch length using LMR-400-FR coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The fire rated N male to N male right angle low loss cable 24 inch length using LMR-400-FR coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W12590LF/HS-24 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12590LF/HS-24 RF cable has a FRPE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W12590LF/HS-24 is built with LMR-400-FR which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12590LF/HS-24 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 1 : $156.99 25 : $149.14 50 : $141.29 100 : $135.01
|
| 0
 |