| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
P48.. Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() TME | ZGZP4-8 RD | RELPOL | Connection bridge; 10A; 250VAC; Electr.connect: Push-in; red |
| 53 | |
| P48-TT-C075-050BK | WEST POL | Cable; round; 1x0.75mm2; cables,DC 4,8/1,7 plug; straight; 0.5m |
| 42 | ||
| RGC1P48V12ED | Carlo Gavazzi Holding AG | Relay: solid state; 15A; 190÷550VAC; RGC1P; 1-phase; IP20; -40÷70°C RoHS : Compliant |
| 0 | ||
| SGP-48 | Thomas & Betts | Support flange; polyamide; for braids; grey; Size: 48 |
| 0 | ||
| SP485CN-L/TR | MaxLinear Inc | IC: transceiver RoHS : Compliant |
| 0 | ||
| SP485ECN-L | MaxLinear Inc | IC: interface; transceiver; RS422 / RS485; 10Mbps; SO8 RoHS : Compliant |
| 0 | ||
| SWA-P48 | Thomas & Betts | Connector; Thread: PG; brass; WA; IP68; Pitch: 15; twistable; Size: 55 |
| 0 | ||
| TP5KP48CA | Littelfuse Inc | Diode: TVS; 53.3V; 65.9A; bidirectional; P600; 5kW; 5KP; Ch: 1 RoHS : Compliant |
| 0 | ||
| TPK30KP48A | SMC Diode Solutions | Diode: TVS; 30kW; 53.3÷58.9V; 390A; unidirectional; SPD4; bulk |
| 0 | ||
| QFP-48 | Elprotronic Inc | Adapter: IDC14-QFP48; Interface: cJTAG,JTAG; IDC14,IDC20 |
| 0 | ||
| RGC1P48V62EA | Carlo Gavazzi Holding AG | Relay: solid state; 63A; 190÷550VAC; RGC1P; 1-phase; IP20; -40÷70°C RoHS : Compliant |
| 0 | ||
| RK73G1ETTP4871D | KOA Speer Electronics Inc | Resistor: thick film; 4.87kΩ; SMD; 0402; 100mW; ±0.5%; RK73G; 50V RoHS : Compliant |
| 0 | ||
| STPK15KP48CATR | SMC Diode Solutions | Diode: TVS; 15kW; 53.3÷58.9V; 195A; bidirectional; SPD4; reel |
| 0 | ||
P4802ACL![]() | Littelfuse Inc | Thyristor: TSS; Urmax: 440V; TO220A; THT; 50A; symmetric; SIDACtor® RoHS : Compliant |
| 0 | ||
P4802ACMCL![]() | Littelfuse Inc | Thyristor: TSS; Urmax: 440V; TO220A; THT; 30A; symmetric; SIDACtor® RoHS : Compliant |
| 0 | ||
![]() Verical | P4802SCLRP | Littelfuse Inc | Thyristor Surge Protection Devices 440V 30A 2-Pin SMB T/R RoHS : Exempt |
| 1,542 | |
| P4-824222 | OTTO Engineering Inc | P4-824222 |
| 48 | ||
![]() Avnet Americas | SP483CN-L/TR | MaxLinear Inc | RS485/RS422 Transceiver, Half Duplex, 1 TX, 1 RX, 4.75 V to 5.25 V, 8 Pins, NSOIC - Tape and Reel (Alt: SP483CN-L/TR) RoHS : Compliant |
| 2,500 | |
| SP481EEN-L/TR | MaxLinear Inc | RS485/RS422 Transceiver, Half Duplex, 1 TX, 1 RX, 4.75 V to 5.25 V, 8 Pins, NSOIC - Tape and Reel (Alt: SP481EEN-L/TR) RoHS : Compliant |
| 2,500 | ||
MCP4821-E/MS![]() | Microchip Technology Inc | Digital to Analog Converter, 1 Channel, 12 bit, Voltage, Serial Microwire, SPI, 2.7 V to 5.5 V - Rail/Tube (Alt: MCP4821-E/MS) RoHS : Compliant |
| 900 | ||
TIP48G![]() | onsemi | Bipolar (BJT) Single Transistor, NPN, 300 V, 1 A, 40 W, TO-220, Through Hole - Rail/Tube (Alt: TIP48G) RoHS : Compliant |
| 750 | ||
| HFJ11-RP48E-L12RL | Halo Electronics Inc | Conn RJ-45 F 8 POS 2.54mm Solder RA Thru-Hole 14 Terminal 1 Port - Rail/Tube (Alt: HFJ11-RP48E-L12RL) RoHS : Compliant |
| 397 | ||
| HDSP-4850 | Broadcom Limited | - Rail/Tube (Alt: HDSP-4850) RoHS : Compliant |
| 243 | ||
| SP485CN-L | MaxLinear Inc | RS485/RS422 Transceiver, Half Duplex, 1 TX, 1 RX, 4.75 V to 5.25 V, 8 Pins, NSOIC - Rail/Tube (Alt: SP485CN-L) RoHS : Compliant |
| 98 | ||
| MCP48FEB28-E/MQ | Microchip Technology Inc | Digital to Analog Converter, 8 Channels, 12 bit, Voltage, Serial I2C, SPI, 2.7 V to 5.5 V, 20 Pins - Rail/Tube (Alt: MCP48FEB28-E/MQ) RoHS : Not Compliant |
| 8 | ||
| MCP48FVB04-E/MQ | Microchip Technology Inc | Digital to Analog Converter, 4 Channels, 8 bit, Voltage, Serial I2C, SPI, 2.7 V to 5.5 V, 20 Pins - Rail/Tube (Alt: MCP48FVB04-E/MQ) RoHS : Not Compliant |
| 8 | ||
| MCP48FVB08-E/MQ | Microchip Technology Inc | Digital to Analog Converter, 8 Channels, 8 bit, Voltage, Serial I2C, SPI, 2.7 V to 5.5 V, 20 Pins - Rail/Tube (Alt: MCP48FVB08-E/MQ) RoHS : Not Compliant |
| 8 | ||
| MCP48FEB24-20E/ST | Microchip Technology Inc | Digital to Analog Converter, 4 Channels, 12 bit, Voltage, Serial I2C, SPI, 2.7 V to 5.5 V, 20 Pins - Rail/Tube (Alt: MCP48FEB24-20E/ST) RoHS : Not Compliant |
| 8 | ||
| MCP48FEB28-20E/ST | Microchip Technology Inc | Digital to Analog Converter, 8 Channels, 12 bit, Voltage, Serial I2C, SPI, 2.7 V to 5.5 V, 20 Pins - Rail/Tube (Alt: MCP48FEB28-20E/ST) RoHS : Not Compliant |
| 8 | ||
| MCP48FVB08-20E/ST | Microchip Technology Inc | Digital to Analog Converter, 8 Channels, 8 bit, Voltage, Serial I2C, SPI, 2.7 V to 5.5 V, 20 Pins - Rail/Tube (Alt: MCP48FVB08-20E/ST) RoHS : Not Compliant |
| 8 | ||
| MCP48FVB04-20E/ST | Microchip Technology Inc | Digital to Analog Converter, 4 Channels, 8 bit, Voltage, Serial I2C, SPI, 2.7 V to 5.5 V, 20 Pins - Rail/Tube (Alt: MCP48FVB04-20E/ST) RoHS : Not Compliant |
| 8 | ||
MCP4822-E/MS![]() | Microchip Technology Inc | - Rail/Tube (Alt: MCP4822-E/MS) RoHS : Compliant |
| 1 | ||
![]() Arrow Electronics | P4802SCLRP | Littelfuse Inc | Thyristor Surge Protection Devices 440V 30A 2-Pin SMB T/R RoHS : Exempt |
| 1,542 | |
![]() Newark | OP484FSZ-REEL7![]() | Analog Devices Inc | Op-Amp, 4.25Mhz, -40 To 125Deg C, Nsoic; |Analog Devices, Inc. OP484FSZ-REEL7 RoHS : Compliant |
| 2,144 | |
OP484FSZ-REEL7![]() | Analog Devices Inc | Op-Amp, 4.25Mhz, -40 To 125Deg C, Nsoic; |Analog Devices, Inc. OP484FSZ-REEL7 RoHS : Compliant |
| 2,144 | ||
MCP4821-E/P![]() | Microchip Technology Inc | Digital To Analogue Converter, 12 Bit, S; |Microchip Technology MCP4821-E/P RoHS : Compliant |
| 1,212 | ||
| HDSP-4840 | Broadcom Limited | Led Bar Array, Yel; |Broadcom HDSP-4840 RoHS : Compliant |
| 1,052 | ||
| MP4816GFP | Monolithic Power Systems | Analogue Sw, Spst-No, -25 To 125Deg C; |Monolithic Power Systems (Mps) MP4816GFP RoHS : Compliant |
| 179 | ||
MCP4821-E/P![]() | Microchip Technology Inc | Dac, 12Bit, -40 To 125Deg C; Resolution (Bits):12Bit; Sampling Rate:-; Data Interface:3 Wire, Serial; Supply Voltage Range:2.7V To 5.5V; Adc/Dac Case Style:Dip; No. Of Pins:8Pins; Input Channel Type:Serial; Msl:Msl 1 - Unlimited Rohs Compliant: Yes RoHS : Compliant |
| 114 | ||
| CP486018 | nVent Hoffman | Metal Enclosure; |Nvent Hoffman CP486018 RoHS : Compliant |
| 13 | ||
| CPP48HDVNSWBL | Panduit Corp | Patch Panel, Unloaded, 48Port, 1U; Connector Type:Unloaded Patch Panel; No. Of Ports:48Ports; Lan Category:-; Rack U Height:1U; Product Range:Mini-Com Series Rohs Compliant: Yes |Panduit CPP48HDVNSWBL RoHS : Compliant |
| 11 | ||
| 44ATM160T-P480 | Ideal Power Inc | Adapter, Ac-Dc, 48V, 3.3A; |Ideal Power 44ATM160T-P480 RoHS : Compliant |
| 9 | ||
| MCP48FEB28-E/MQ | Microchip Technology Inc | Dac, Octal, 12Bit, -40 To 125Deg C; Resolution (Bits):12Bit; Sampling Rate:-; Data Interface:Spi; Supply Voltage Range:2.7V To 5.5V; Adc/Dac Case Style:Vqfn-Ep; No. Of Pins:20Pins; Input Channel Type:Serial; Msl:Msl 3 - 168 Hours Rohs Compliant: Yes RoHS : Compliant |
| 8 | ||
| DRC3P48D420 | Crydom Inc | Solid State Contactor, 530V, 5A, Din; |Sensata/crydom DRC3P48D420 RoHS : Compliant |
| 7 | ||
| H1SP48U42WH | Hammond Manufacturing | Side Panel, Data Center Server Cabinet; |Hammond H1SP48U42WH RoHS : Compliant |
| 6 | ||
| ESP4836 | Hammond Manufacturing | Encl Accessory, Swing Panel, Steel, Wht; |Hammond ESP4836 RoHS : Compliant |
| 4 | ||
| HEP-480-48A | Mean Well | Power Supply, Ac-Dc, 48V, 10A; |Mean Well HEP-480-48A RoHS : Compliant |
| 3 | ||
| TSOP48-DIP48 | Batronix Elektronik | Adaptor, Tsop48 To Dip48, Bx48/448/848; |Batronix TSOP48-DIP48 RoHS : Compliant |
| 1 | ||
![]() Analog Devices Inc | OP482ACBZ-R7 | Analog Devices Inc | QUAD LOW PWR JFET OP AMP RoHS : Compliant |
| 223,200 | |
OP482GSZ-REEL7![]() | Analog Devices Inc | QUAD LOW WR JFET OP AMP RoHS : Compliant |
| 2,550 | ||
OP484FSZ-REEL![]() | Analog Devices Inc | PREC RAIL TO RAIL OP AMP RoHS : Compliant |
| 2,500 | ||
OP481GSZ-REEL7![]() | Analog Devices Inc | QUAD 5uA RAIL TO RAIL OP AMP RoHS : Compliant |
| 2,000 | ||
OP481GSZ![]() | Analog Devices Inc | QUAD 5uA RAIL TO RAIL OP AMP RoHS : Compliant |
| 1,916 | ||
OP482GSZ-REEL![]() | Analog Devices Inc | QUAD LOW PWR JFET OP AMP RoHS : Compliant |
| 1,910 | ||
OP484ESZ-REEL![]() | Analog Devices Inc | 3REC RAIL TO RAIL OP AMP TAPE RoHS : Compliant |
| 917 | ||
OP481GRUZ-REEL![]() | Analog Devices Inc | QUAD 5uA RAIL TO RAIL OP AMP RoHS : Compliant |
| 333 | ||
OP484ESZ![]() | Analog Devices Inc | PREC RAILTO RAIL OP AMP RoHS : Compliant |
| 320 | ||
OP484FSZ-REEL7![]() | Analog Devices Inc | PREC RAIL TO RAIL OP AMP RoHS : Compliant |
| 277 | ||
OP482GSZ![]() | Analog Devices Inc | QUAD LOW PWR JFET OP AMP RoHS : Compliant |
| 238 | ||
OP484FPZ![]() | Analog Devices Inc | PREC RAIL TO RAIL OP AMP RoHS : Compliant |
| 226 | ||
OP484FSZ![]() | Analog Devices Inc | PREC RAIL TO RAIL OP AMP RoHS : Compliant |
| 220 | ||
OP482GPZ![]() | Analog Devices Inc | QUAD LOW PWR JFET OP AMP RoHS : Compliant |
| 22 | ||
![]() RS | IO-C14PP-48 | Io Audio Technologies | CONNECTOR, IEC C14,PUSH ON, PANEL MOUNT, BLADE TERMINALS,4.8MM,3 CONTACTS,15A/250V |
| 250 | |
| 2903678 (REL-IR4/LDP- 48DC/4X21) | Phoenix Contact | POWER RELAY, 4PDT, 48VDC/250VAC, 250VDC, 6A, RIFLINE COMPLETE RELAY SERIES |
| 42 | ||
| 14.5T8/BCP/48-850/MF18/G 25/1 (577783) | Philips Semiconductors | LED BULB, 48IN T8, 14.5 WATTS, 5000 KELVIN, 1800 LUMENS, 120-277 VOLTS, UL TY: |
| 25 | ||
| HWS600P-48 | TDK-Lambda Corporation | POWER SUPPLY, AC-DC, 115230VAC, OUTPUT 48V 12.5A (41.5A PK),600W (1992W PK) RoHS : Compliant |
| 24 | ||
| BVND-P488GT | PMA Cable Protection | VN STRAIGHT CONNECTOR, IP66, PG48, CONDUIT SIZE NW/METRIC 48/50, BLACK |
| 23 | ||
| DRC3P48B400R | Crydom Inc | CONTACTOR, THREE-PHASE, 480VAC, 5A, 120VAC CONTROL, NO AUX., RN 3L, DRC SERIES |
| 17 | ||
| OD172SAP-48HHB10AZX (OD172SAP-48HHB10AZ) | Orion Fans | DC FAN,48V 172 X 150 X 51MM, REVERSIBLE FLOW |
| 12 | ||
| 219BBXP-48VDC (P198030) | Struthers-Dunn | 219 SERIES, INDUSTRIAL RELAY, 10 AMP, 2 POLE N.O.+ DPDT, 48 VDC COIL |
| 9 | ||
| 197-DP484 | SloanLED | LAMP, LED, T-3 1/4, BAYONET, AMBER, 48V, 25MA, 500MCD, 30DEG |
| 4 | ||
| CPP48WBLY | Panduit Corp | MINI COM 48-PORT MODULAR PATCH PANEL WITH FACEPLATES IN BLACK, (2RU). |
| 3 | ||
| STP480Y05 | Mersen Electrical Power | SURGE PROTECTION DEVICE, DIN RAIL, PLUGABLE, 50 KA, 277/480V Y, 3P, TYPE 1 |
| 3 | ||
| STP480S05M | Mersen Electrical Power | SPD, DIN RAIL, PLUGABLE, 50 KA, 240/480V SPLIT PHASE, 2P, TYPE 1, REMOTE IND. |
| 2 | ||
| STP480YN07 | Mersen Electrical Power | SURGE PROTECTION DEVICE, PLUGGABLE,4 POLE,3 PHASE WYE, 277/480VAC, STP SERIES |
| 1 | ||
| TLP48USBCUFO | Tripp Lite | CONFERENCE, SURGE, PROTECTOR, 4, OUTLET, USB, C, 3, USB-A, MICRO-USB RoHS : Compliant |
| 1 | ||
| IKS-6728A-4GTXSFP-48-48-T | Moxa Inc | ETHERNET SWITCH, 28 PORTS, MANAGED, 4 TX SFP COMBO PORTS, 48 VOLT, DUAL POWER, |
| 1 | ||
![]() Microchip Technology Inc | MCP48CMB08T-E/ML | Microchip Technology Inc | SPI Octal 8-Bit Non-Volatile, QFN, Projected EOL: 2051-06-25 RoHS : Compliant |
| 3,300 | |
| MCP48CMB18T-E/ML | Microchip Technology Inc | SPI Octal 10-Bit Non-Volatile, QFN, Projected EOL: 2051-06-25 RoHS : Compliant |
| 3,300 | ||
| MCP48CVB18T-E/ML | Microchip Technology Inc | SPI Octal 10-Bit Volatile, QFN, Projected EOL: 2051-06-25 RoHS : Compliant |
| 3,300 | ||
| MCP48CVB08-E/ML | Microchip Technology Inc | SPI Octal 8-Bit Volatile, QFN, Projected EOL: 2051-06-25 RoHS : Compliant |
| 2,548 | ||
| MRT100KP48CA | Microchip Technology Inc | Bi-Directional TVS _ 5A, Projected EOL: 2049-02-05 RoHS : Compliant |
| 1,688 | ||
| MRT100KP48A | Microchip Technology Inc | Uni-Directional TVS _ 5A, Projected EOL: 2049-02-05 RoHS : Compliant |
| 861 | ||
| MCP48CMD21-E/MG | Microchip Technology Inc | SPI Single 12-Bit Non-Volatile, QFN, Projected EOL: 2051-06-15 RoHS : Compliant |
| 819 | ||
| MPLAD36KP48CA | Microchip Technology Inc | Bi-Directional TVS _ PLAD, Projected EOL: 2049-02-05 RoHS : Compliant |
| 550 | ||
| MPLAD6.5KP48AE3 | Microchip Technology Inc | Uni-Directional TVS _ miniPLAD, Projected EOL: 2049-02-05 RoHS : Compliant |
| 380 | ||
| MCP48CVB04-E/ML | Microchip Technology Inc | SPI Quad 8-Bit Volatile, QFN, Projected EOL: 2051-06-25 RoHS : Compliant |
| 380 | ||
| MCP48CMD11-E/MG | Microchip Technology Inc | SPI Single 10-Bit Non-Volatile, QFN, Projected EOL: 2051-06-15 RoHS : Compliant |
| 377 | ||
| MXLRT100KP48A | Microchip Technology Inc | Uni-Directional TVS _ 5A, Projected EOL: 2049-02-05 RoHS : Compliant |
| 289 | ||
| MRT100KP48AE3 | Microchip Technology Inc | Uni-Directional TVS _ 5A, Projected EOL: 2049-02-05 RoHS : Compliant |
| 174 | ||
| MPLAD15KP48A | Microchip Technology Inc | Uni-Directional TVS _ PLAD, Projected EOL: 2049-02-05 RoHS : Compliant |
| 171 | ||
| MXPLAD15KP48CA | Microchip Technology Inc | Bi-Directional TVS _ PLAD, Projected EOL: 2049-02-05 RoHS : Compliant |
| 13 | ||
![]() Onlinecomponents.com | P48-W | Leviton Manufacturing Co | 5-Gang 4-Toggle 1-Duplex Device Combination Wallplate, Standard Size, Painted Metal, Device Mount - White RoHS : Compliant |
| 0 | |
| TK26E-P48 | Fuji Electric Co Ltd | RoHS : Compliant |
| 0 | ||
| 49013-P48 | Leviton Manufacturing Co | Voice-Grade Patch Panel, 48-port, 2RU, 8P4C Jacks, 110 style termination RoHS : Compliant |
| 0 | ||
| SWA-P48 | Thomas & Betts | PMA Accessories - SWA-P - Metal Swivel-Adapter - Metal Thread PG48 - Thread Length 15mm - Material Nickel Plated Brass - IP68, IP69 RoHS : Compliant |
| 0 | ||
| SCA-P48 | Thomas & Betts | PMA SCA-P Positioning Adapter - Material Brass - Nickel-Plated Finish - PG Thread 48 RoHS : Compliant |
| 0 | ||
| BDR-P48 | Thomas & Betts | Thread Spacer with Seal Ring - PG Thread - Thread 48 - Color Black. RoHS : Compliant |
| 0 | ||
| GKS-P48 | Thomas & Betts | Metal Thrd Throat Insultr MPG48. RoHS : Compliant |
| 0 | ||
| N252-P48 | Tripp Lite | 48PT CAT6A PTCH PNL,PNCHDWN,BK RoHS : Compliant |
| 0 | ||
| PPMDI-P48-12N | L-com Inc | Passive PM Dual Stage Isolator, Grade P RoHS : Compliant |
| 0 | ||
| 10-690658-P48 | Amphenol Commercial | PG48 RoHS : Compliant |
| 0 | ||
| PPMDI-P48-191 | L-com Inc | Passive PM Dual Stage Isolator, Grade P RoHS : Compliant |
| 0 | ||
| PSMDI-P48-12N | L-com Inc | Passive SM Dual Stage Isolator, Grade P RoHS : Compliant |
| 0 | ||
| HFAK-P48/48 | Thomas & Betts | PMA EMC Adapter - PG Thread - P48/P48 - Aluminum - Nickel-Plated Finish RoHS : Compliant |
| 0 | ||
| IDD-25-G-P48 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| PSMDI-P48-191 | L-com Inc | Passive SM Dual Stage Isolator, Grade P RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | IP4855CX25Z | NXP Semiconductors | Interface Circuit, PBGA25 RoHS : Compliant |
| 218,471 | |
IP4856CX25/CZ![]() | Nexperia | Interface Circuit, PBGA25 RoHS : Compliant |
| 2 | ||
NCP4894DMR2G![]() | onsemi | Audio Amplifier Class AB 1-Channel (Mono) 1.8W 10-SOP T/R RoHS : Compliant |
| 7,582 | ||
TIP48![]() | onsemi | Trans BJTs Single 300V 1A TO-220-3 RoHS : Compliant |
| 384 | ||
OP481GSZ-REEL![]() | Analog Devices Inc | Op Amp Standard 105kHz 14-SOIC T/R RoHS : Compliant |
| 2,561 | ||
OP484FS-REEL![]() | Analog Devices Inc | Op Amp Standard 4.25MHz 14-SOIC T/R RoHS : Not Compliant |
| 12,336 | ||
ADS62P48IRGCT![]() | Texas Instruments | IC ADC 2 CONV 14Bits Pipelined LVDS - Parallel, Serial 64-QFN T/R RoHS : Compliant |
| 1,135 | ||
CY37064VP48-100BAC![]() | Cypress Semiconductor | CPLD In-System Reprogrammable™ (ISR™) CMOS 64 Macrocell 3V - 3.6V 48-BGA RoHS : Not Compliant |
| 1,509 | ||
| HSP48410GM-25/883 | Harris Semiconductor | Histogrammer/Accumulating Buffer Image and Signal Analysis 84-PGA RoHS : Not Compliant |
| 6 | ||
| HSP48901GC-20 | Harris Semiconductor | IC FIR 30MHz 4.75V - 5.25V 68-PGA RoHS : Compliant |
| 1,755 | ||
| HSP48908VC-20 | Harris Semiconductor | Dimensional Convolver Video 100-QFP RoHS : Not Compliant |
| 762 | ||
| TIP48 | Harris Semiconductor | Trans BJTs Single 300V 1A TO-220-3 RoHS : Compliant |
| 1,000 | ||
| SP483CN | Sipex Corporation | IC INTERFACE Transceiver RS422, RS485 5Mbps 4.75V - 5.25V 8-SOIC RoHS : Not Compliant |
| 207 | ||
| SP488CS-L | Sipex Corporation | IC INTERFACE Receiver RS422, RS485 10Mbps 4.75V - 5.25V 16-DIP RoHS : Compliant |
| 20 | ||
| SP489CS-L | Sipex Corporation | IC INTERFACE Receiver RS422, RS485 10Mbps 4.75V - 5.25V 16-DIP RoHS : Compliant |
| 813 | ||
![]() Sager | SFIL-P488 | ABB Group | Conduit Fittings & Accessories | 0 | ||
| SQ5153WP48RSM | TE Connectivity | TE Connectivity | 0 | |||
| DRA3P48B22 | Crydom Inc | Contactors - Solid State SOLID STATE RELAY 48-510 VAC |
| 0 | ||
| DRC3P48D4112 | Crydom Inc | Contactors - Solid State 3P 480V 7.6A 24V/DC 1NO+1NC ZC 2L |
| 0 | ||
| DRC3P48D411R2 | Crydom Inc | Contactors - Solid State 3P 480V 7.6A 24V/DC 1NO+1NC RN 2L |
| 0 | ||
| VTA500P480S240-01 | ABB Group | VLT TRNSFMR 500W 480V 240V 50-60HZ |
| 0 | ||
| P4-821111 | OTTO Engineering Inc | AUXILLARY ACTUATORS, MOMENTARY ACTION, TWO STEP CUSTOM PUSHBUTTON RoHS : Compliant |
| 0 | ||
| P48D35M | Panduit Corp | Power Outlet Strips MI PDU, 60AMP, (36)C13, (12)C19, IEC 603 |
| 0 | ||
| P48E13M-BL1A | Panduit Corp | Power Outlet Strips VERTICAL,(36) C13,(12) C19, MONITORED SW | 0 | |||
| P48E21G | Panduit Corp | G6 MS PDU, 30A, (24)C13/C15, (24)C13/15/ |
| 0 | ||
| NP48AL | Hubbell Incorporated | Hubbell | 0 | |||
| AP4-8740-1 | Sensata Circuit Breakers | Circuit Breakers Cir Brkr,HydMag |
| 0 | ||
| DRA3P48B2R2 | Crydom Inc | Contactors - Solid State SOLID STATE RELAY 48-510 VAC |
| 0 | ||
| DRA3P48D2 | Crydom Inc | Contactors - Solid State DIN MNT 3PH 480VAC 2A 5VDC CNT ZC |
| 0 | ||
| DRC3P48D411 | Crydom Inc | Contactors - Solid State 3P 480V 5A 24VAC/DC 1NO+1NC ZC 3L |
| 0 | ||
![]() Ameya Holding Limited | SP483EEN-L/TR | MaxLinear Inc | SP483 Series 250 kbps 5 V Low Power Half Duplex RS-485 Transceiver - NSOIC-8 RoHS : Compliant | 18,790 | ||
SP483ECN-L/TR![]() | Exar Corporation | SP483 Series 250 kbps 5 V Low Power Half Duplex RS-485 Transceiver - NSOIC-8 RoHS : Compliant | 1,139 | |||
| MPLAD36KP48CAE3/TR | Microchip Technology Inc | RoHS : Compliant | 1,026 | |||
OP484FSZ-REEL7![]() | Analog Devices Inc | IC OPAMP GP 4.25MHZ RRO 14SO RoHS : Compliant | 1,016 | |||
| MXPLAD30KP48A/TR | Microchip Technology Inc | RoHS : Not Compliant | 233 | |||
| 5P4818-065-2130 | Microchip Technology Inc | 151 | ||||
![]() ComSIT USA | VPC3SQFP48 | PROFIC | AVAILABLE EU | 630 | ||
![]() ComSIT USA | CTP485 | Schlegel EMI | Electronic Component RoHS : Compliant | 12,060 | ||
| ADN2841XCP48REEL | Analog Devices Inc | Interface Circuit RoHS : Not Compliant | 3,626 | |||
| TSOP4840 | Vishay Intertechnologies | IR Receiver Module for Remote Control Systems Linear Output Photo IC RoHS : Compliant | 2,160 | |||
| TSOP4836SI1 | Vishay Intertechnologies | IR RECEIVER MODULE FOR REMOTE CONTROL SYSTEMS Logic IC Output Optocoupler, 1-Channel RoHS : Compliant | 2,000 | |||
TIP48G![]() | onsemi | HIGH VOLTAGE NPN SILICON POWER TRANSISTOR Power Bipolar Transistor, 1A I(C), 300V V(BR)CEO, 1-Element, NPN, Silicon, TO-220AB, Plastic/Epoxy, 3 Pin RoHS : Compliant | 1,600 | |||
| C9BR12P486X | Mitsumi Electric Co Ltd | Electronic Component RoHS : Compliant | 1,500 | |||
| TSOP4838 | Vishay Intertechnologies | IR Receiver Module for Remote Control Systems Linear Output Photo IC RoHS : Compliant | 990 | |||
15KP48A![]() | Littelfuse Inc | 15000W AXIAL LEADED TVS DIODE Trans Voltage Suppressor Diode, 15000W, 48V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant | 800 | |||
OP481GRU![]() | Analog Devices Inc | ULTRALOW POWER, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 2500uV Offset-Max, CMOS, PDSO14 RoHS : Not Compliant | 600 | |||
| TSOP4836 | Vishay Intertechnologies | Logic Output Photo IC RoHS : Not Compliant | 360 | |||
| HDSP4850H4 | Avago Technologies | 7-segment LED display, Avago, 14.2mm, red, common anode RoHS : Compliant | 268 | |||
| MCP4821EMS | mct | 12-BIT DAC WITH INTERNAL VREF AND SPI INTERFACE D/A Converter, 1 Func, Serial Input Loading, 4.5us Settling Time, PDSO8 RoHS : Compliant | 100 | |||
| SP485CSL | Sipex Corporation | LOW POWER HALF-DUPLEX RS-485 TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDIP8 RoHS : Not Compliant | 50 | |||
| SP483EENL | MaxLinear Inc | ENHANCED LOW EMI HALF-DUPLEX RS-485 TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8 RoHS : Compliant | 11 | |||
| HSP48908JC32 | HARTING Technology Group | TWO DIMENSIONAL CONVOLVER Convolver, 8-Bit, CMOS, PQCC84 RoHS : Not Compliant | 9 | |||
![]() Interstate Connecting Components | 2DD100P-48 | ITT Interconnect Solutions | 2DD100P-48 | 0 | ||
| 30-P48197E002 | Amphenol Fiber Systems International | 4 CH. TFOCA-II PLUG TO PLUG - | 0 | |||
| 280-054P4-8P8MENNE | Glenair Inc | 24308 8#8 | 0 | |||
| RP4800-2 | Glenair Inc | CONDUIT ADAPTER | 0 | |||
| 280-046P4-8W8MEGP | Glenair Inc | RoHS : Compliant | 0 | |||
| IP48F0000/AA | Amphenol Positronic | 0 | ||||
| IP48F3N0A1 | Amphenol Positronic | 0 | ||||
| RP-4800-NO.2-9-SP-CS34568 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCNB52154001 | 0 | |||
| RP-4800-NO.7-0-SP-CS34568 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part: RYCNB52354001 | 0 | |||
| IP48M00E0/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| IP48M400A1 | Amphenol Positronic | 0 | ||||
| 280-046P4-8W8MENL | Glenair Inc | HIPER-D COMBO PIN W STD FLANGE RoHS : Compliant | 0 | |||
| RP-4800-NO.3-0-STK | TE Connectivity | 5020042016 2-1193753-5 M23053/5-117-0 RoHS : Compliant |
| 0 | ||
| IP48F930TA1/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| IP48M0JEL0 | Amphenol Positronic | 0 | ||||
![]() NexGen Digital | TSOP4838SB1 | Vishay Huntington | 10,990 | |||
| SP485CN-L | MaxLinear Inc | RoHS : Compliant | 185 | |||
| OD172SAP-48HB | Orion Fans | 12 | ||||
![]() PEI Genesis | TV06RW-25-20P-480 | Amphenol Corporation |
| 2 | ||
![]() Powell Electronics | RP-4800-NO.2-0-SP | TE Connectivity | NB17364001 RoHS : Compliant |
| 840 | |
| BU-P4896 | Mueller Electric Company | CONN ADAPT PLUG TO JACK BNC |
| 523 | ||
| TTMS-MP-4.8-4 | TE Connectivity | Connectors |
| 419 | ||
| TTMS-MP-4.8-6 | TE Connectivity | Connectors |
| 132 | ||
| MS-000-000-000-4100-P48 | AirBorn a molex company | MS-000-000-000-4100-P48 |
| 70 | ||
| 2CWBP48 | Hammond Manufacturing | S2MCS-48" ST. INNER PANEL-BASE RoHS : Compliant |
| 7 | ||
| RQ9P-48D12R | Adam Technologies Inc | DC/DC Conv 9W 48Vin Dual 12Vout RoHS : Compliant |
| 7 | ||
| H1SP48U48WH | Hammond Manufacturing | 48U 48IN DEEP SOLID SIDE PANEL RoHS : Compliant |
| 5 | ||
| H1SP48U42WH | Hammond Manufacturing | 48U 42IN DEEP SOLID SIDE PANEL RoHS : Compliant |
| 4 | ||
| OD254AP-48LB | Orion Fans | DC Fan 254mm 48VDC Low Spd Ball |
| 3 | ||
| AP4896-4848-G-C | Altech Corporation | Plastic Adaptor Plate |
| 3 | ||
| TV06RW-25-20P-480 | Amphenol Corporation | TV 30C 30MIX PIN PLUG RECP |
| 1 | ||
| ESP4824 | Hammond Manufacturing | E-S. PANEL FITS 48 X 24 RoHS : Compliant |
| 1 | ||
| 2CWCP48 | Hammond Manufacturing | S2MCS-48" CONSOLET PANEL RoHS : Compliant |
| 1 | ||
| 280-056P4-8P8MENPA | Glenair Inc | HIPER-D - RECTANGULAR CONN RoHS : Compliant |
| 1 | ||
![]() Chip 1 Exchange | LTC485CN8/SP485CS | INSTOCK | 20,000 | |||
| EFM32HG322F64G-C-QFP48 | Vishay Siliconix | INSTOCK | 17,460 | |||
| P483/P1800EB-RP | INSTOCK | 5,415 | ||||
| NCP4894DMR2G | INSTOCK | 3,857 | ||||
| SP483CN-L/TR | Exar Corporation | INSTOCK RoHS : Compliant | 2,334 | |||
| TSOP4830SS1F | INSTOCK | 1,890 | ||||
| OP482GSZ | INSTOCK | 885 | ||||
SP485EN-L/TR![]() | Exar Corporation | INSTOCK RoHS : Compliant | 715 | |||
| P484/P3403ACL-60-RP | LIT | INSTOCK | 700 | |||
| SP489ET | INSTOCK | 598 | ||||
| SP489EET | Exar Corporation | INSTOCK RoHS : Not Compliant | 396 | |||
| TSOP4836 | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 29 | |||
| RP-4800-NO.-1.0BLK | INSTOCK | 15 | ||||
| HDSP-4850 | Broadcom Limited | INSTOCK RoHS : Compliant | 8 | |||
| HDSP-4850 | INSTOCK | 4 | ||||
![]() Avnet Abacus | HC2EHP48FJ | Panasonic Electronic Components | MATHC2EHP48FJ (Alt: HC2EHP48FJ) RoHS : Compliant | 0 | ||
| CP4862-000 | TE Connectivity | AMPCP4862000 (Alt: CP4862-000) RoHS : Compliant | 0 | |||
| JM1ANP48FT | Panasonic Electronic Components | MATJM1ANP48FT (Alt: JM1ANP48FT) RoHS : Compliant | 0 | |||
| AM1P-4812DZ | Aimtec | Module DCDC 2OUT 12V 0042A 1W 5Pin DIP (Alt: AM1P-4812DZ) RoHS : Compliant | 0 | |||
| AM1P-4809SZ | Aimtec | Module DCDC 1OUT 9V 011A 1W 4Pin DIP (Alt: AM1P-4809SZ) RoHS : Compliant | 0 | |||
| AM1P-4824DZ | Aimtec | Module DCDC 2OUT 24V 0021A 1W 5Pin DIP (Alt: AM1P-4824DZ) RoHS : Compliant | 0 | |||
| AM1P-4818SZ | Aimtec | Module DCDC 1OUT 18V 0056A 1W 4Pin DIP (Alt: AM1P-4818SZ) RoHS : Compliant | 0 | |||
| HL2HP48ACFJ | Panasonic Electronic Components | Electromechanical Relay DPDTCO 10A 48VAC Through Hole (Alt: HL2HP48ACFJ) RoHS : Compliant | 0 | |||
| 5KP48CA/TR13 | YAGEO Corporation | (Alt: 5KP48CA/TR13) RoHS : Compliant | 0 | |||
| AM1P-4815SH30Z | Aimtec | Module DCDC 1OUT 15V 0067A 1W 4Pin DIP (Alt: AM1P-4815SH30Z) RoHS : Compliant | 0 | |||
| C44APGP4800ZE0J | KEMET Corporation | Power Film Capacitor Metallized PP Can 8 uF 5 Panel Mount 500 V 12 kV Threaded Stud (Alt: C44APGP4800ZE0J) RoHS : Compliant | 0 | |||
| RK73H1ETTP4873F | KOA Speer Electronics Inc | FC 0402 1 - Tape and Reel (Alt: RK73H1ETTP4873F) RoHS : Compliant | 0 | |||
| RK73G1ETTP4871F | KOA Speer Electronics Inc | FC 0402 1 - Tape and Reel (Alt: RK73G1ETTP4871F) RoHS : Compliant | 0 | |||
| RN73R1ETTP4871B25 | KOA Speer Electronics Inc | SMD Chip Resistor 487 kohm 01 625 mW 0402 1005 Metric Metal Film Thin Film - Tape and Reel (Alt: RN73R1ETTP4871B25) RoHS : Compliant | 0 | |||
| MDCM28AP480M320A50 | Vicor Power | Module DCDC SingleOut 48V 667A 320W Through Hole 9Pin 3623 Chip (Alt: MDCM28AP480M320A50) RoHS : Compliant | 0 | |||
![]() Avnet Asia | V23990-P482-A39-PM | MACOM | MCMV23990-P482-A39-PM IGBT MODULE, FLOW (Alt: V23990-P482-A39-PM) RoHS : Compliant |
| 500 | |
| V23990-P484-A39-PM | MACOM | MCMV23990-P484-A39-PM IGBT MODULE, FLOW (Alt: V23990-P484-A39-PM) RoHS : Compliant | 300 | |||
| NT1T00P48V4WBFW-KSC1 | ATP Electronics Inc | (Alt: NT1T00P48V4WBFW-KSC1) RoHS : Compliant | 0 | |||
| TSOP4838 | Vishay Intertechnologies | IR Remote Receiver 38KHz 45m 3-Pin (Alt: TSOP4838) RoHS : Compliant | 0 | |||
| SP485CN-L/TR | MaxLinear Inc | RS485/RS422 Transceiver, Half Duplex, 1 TX, 1 RX, 4.75 V to 5.25 V, 8 Pins, NSOIC (Alt: SP485CN-L/TR) RoHS : Compliant | 0 | |||
| SLG4BP48873V | Renesas Electronics Corporation | GPAK MIXED SIGNAL IC (Alt: SLG4BP48873V) RoHS : Compliant | 0 | |||
| SP483EEN-L/TR | MaxLinear Inc | RS485/RS422 Transceiver, Half Duplex, 1 TX, 1 RX, 4.75 V to 5.25 V, 8 Pins, NSOIC (Alt: SP483EEN-L/TR) RoHS : Compliant | 0 | |||
| SP485EEN-L | MaxLinear Inc | RS485/RS422 Transceiver, Half Duplex, 1 TX, 1 RX, 4.75 V to 5.25 V, 8 Pins, NSOIC (Alt: SP485EEN-L) RoHS : Compliant | 0 | |||
| V23990-P487-A39-PM | MACOM | MCMV23990-P487-A39-PM IGBT MODULE, FLOW (Alt: V23990-P487-A39-PM) RoHS : Compliant | 0 | |||
| V23990-P483-A39-PM | MACOM | MCMV23990-P483-A39-PM IGBT MODULE, FLOW (Alt: V23990-P483-A39-PM) RoHS : Compliant | 0 | |||
| SP485EEN-L/TR | MaxLinear Inc | RS485/RS422 Transceiver, Half Duplex, 1 TX, 1 RX, 4.75 V to 5.25 V, 8 Pins, NSOIC (Alt: SP485EEN-L/TR) RoHS : Compliant | 0 | |||
| SDR-867AQ-0-PSP486-TR-05-0 | Qualcomm RFFE Filter Products | CSRSDR-867AQ-0-PSP486-TR-05-0 IC RF TRA (Alt: SDR-867AQ-0-PSP486-TR-05-0) RoHS : Compliant | 0 | |||
| NCP484201MTTW | onsemi | (Alt: NCP484201MTTW) RoHS : Compliant | 0 | |||
| SP485ECN-L/TR | MaxLinear Inc | RS485/RS422 Transceiver, Half Duplex, 1 TX, 1 RX, 4.75 V to 5.25 V, 8 Pins, NSOIC (Alt: SP485ECN-L/TR) RoHS : Compliant | 0 | |||
| SP485CN-L | MaxLinear Inc | (Alt: SP485CN-L) RoHS : Compliant | 0 | |||
![]() Avnet Silica | SP483EEN-L/TR | MaxLinear Inc | RS485RS422 Transceiver Half Duplex 1 TX 1 RX 475 V to 525 V 8 Pins NSOIC (Alt: SP483EEN-L/TR) RoHS : Compliant | 47,500 | ||
| SP485EEN-L/TR | MaxLinear Inc | RS485RS422 Transceiver Half Duplex 1 TX 1 RX 475 V to 525 V 8 Pins NSOIC (Alt: SP485EEN-L/TR) RoHS : Compliant | 5,000 | |||
| MP4816GFP | Monolithic Power Systems | (Alt: MP4816GFP) RoHS : Compliant | 0 | |||
MCP4821-E/P![]() | Microchip Technology Inc | Digital to Analog Converter 1 Channel 12 bit Voltage Serial Microwire SPI 27 V to 55 V (Alt: MCP4821-E/P) RoHS : Compliant | 0 | |||
| MX15KP48CAE3 | Microchip Technology Inc | (Alt: MX15KP48CAE3) RoHS : Compliant | 0 | |||
| SP485RCN-L/TR | MaxLinear Inc | RS485RS422 Transceiver Half Duplex 1 TX 1 RX 475 V to 525 V 8 Pins NSOIC (Alt: SP485RCN-L/TR) RoHS : Compliant | 0 | |||
MCP4812T-E/MS![]() | Microchip Technology Inc | Digital to Analog Converter 2 Channels 10 bit Voltage Serial Microwire SPI 27 V to 55 V (Alt: MCP4812T-E/MS) RoHS : Compliant | 0 | |||
| MRT100KP48CAE3 | Microchip Technology Inc | (Alt: MRT100KP48CAE3) RoHS : Compliant | 0 | |||
| MPLAD36KP48CAE3 | Microchip Technology Inc | Diode TVS Single BiDirection 48V 36kW 2Pin PLAD Bulk (Alt: MPLAD36KP48CAE3) RoHS : Compliant | 0 | |||
| MCP48CMB11-E/UN | Microchip Technology Inc | Digital to Analog Converter 1 Channel 10 bit Voltage SPI 27 V to 55 V 10 Pins MSOP (Alt: MCP48CMB11-E/UN) RoHS : Compliant | 0 | |||
| MCP48FVB01T-E/UN | Microchip Technology Inc | Digital to Analog Converter 1 Channel 8 bit Voltage SPI 27 V to 55 V 10 Pins MSOP (Alt: MCP48FVB01T-E/UN) RoHS : Compliant | 0 | |||
| MCP48FEB12T-E/UN | Microchip Technology Inc | DAC 2CH ResistorString 10Bit 10Pin MSOP TR (Alt: MCP48FEB12T-E/UN) RoHS : Compliant | 0 | |||
| MCP48FVB22T-E/UN | Microchip Technology Inc | Digital to Analog Converter 2 Channels 12 bit Voltage SPI 27 V to 55 V 10 Pins MSOP (Alt: MCP48FVB22T-E/UN) RoHS : Compliant | 0 | |||
| MCP48CMB04-20E/ST | Microchip Technology Inc | SPI Quad 8Bit NonVolatile (Alt: MCP48CMB04-20E/ST) RoHS : Compliant | 0 | |||
| HFJ11-RP48E-L12RL | Halo Electronics Inc | Conn RJ45 F 8 POS 254mm Solder RA ThruHole 14 Terminal 1 Port (Alt: HFJ11-RP48E-L12RL) RoHS : Compliant | 0 | |||
![]() Component Electronics, Inc | TIP48 | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 22,150 | |
| RR0816P-4871-D-67H | Susumu Co Ltd | IN STOCK SHIP TODAY RoHS : Compliant |
| 5,000 | ||
OP482GS![]() | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 143 | ||
P4802AA![]() | Teccor | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 129 | ||
| CSP48-161000 | IN STOCK SHIP TODAY |
| 109 | |||
| SP485CN-L/TR | MaxLinear Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 97 | ||
| TIP48 | Texas Instruments | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 35 | ||
| HDSP-4850 | Agilent Technologies Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 31 | ||
TIP48![]() | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 25 | ||
| HDSP-4840 | IN STOCK SHIP TODAY |
| 12 | |||
| SP485ECN/TR | Sipex Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 11 | ||
| SP488ECP | Sipex Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 3 | ||
| AP-P484AM | Sony Batteries | IN STOCK SHIP TODAY |
| 2 | ||
| TSOP48 | NEEDHAMS | IN STOCK SHIP TODAY |
| 2 | ||
| DIP48 | NEEDHAMS | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | 85-P-480-16 | Southco | The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin |
| 825 | |
| AFP48240A | Essentra Components | 48MM BASE 38-16 THREAD X 4 LEN | 0 | |||
| AFP48110A | Essentra Components | 48MM BASE 516-18 THREAD X 1.5 | 0 | |||
| AFP48280A | Essentra Components | 48MM BASE 12-13 THREAD X 2.75 | 0 | |||
| AFP48200A | Essentra Components | 48MM BASE 38-16 THREAD X 2 LEN | 0 | |||
| AFP48130A | Essentra Components | 48MM BASE 516-18 THREAD X 2 LE | 0 | |||
| AFP48260A | Essentra Components | 48MM BASE 12-13 THREAD X 1.5 L | 0 | |||
| AFP48170A | Essentra Components | 48MM BASE 38-16 THREAD X 1 LEN | 0 | |||
| AFP48220A | Essentra Components | 48MM BASE 38-16 THREAD X 2.75 | 0 | |||
| AFP48270A | Essentra Components | 48MM BASE 12-13 THREAD X 2 LEN | 0 | |||
| RP-481-013 | SHEREX FASTENING SO | 0 | ||||
| SP-48/S | Sugatsune Kogyo Co Ltd | 0 | ||||
| AFP48180A | Essentra Components | 48MM BASE 38-16 THREAD X 1.5 L | 0 | |||
![]() EBV Elektronik | TSOP4838 | Vishay Intertechnologies | IR Remote Receiver 38KHz 45m 3Pin (Alt: TSOP4838) RoHS : Compliant | 69,120 | ||
| HDSP-4850 | Broadcom Limited | (Alt: HDSP-4850) RoHS : Compliant | 2,640 | |||
| HDSP-4830 | Broadcom Limited | (Alt: HDSP-4830) RoHS : Compliant | 1,200 | |||
MCP4822-E/SN![]() | Microchip Technology Inc | Digital to Analog Converter 2 Channels 12 bit Voltage Serial Microwire SPI 27 V to 55 V (Alt: MCP4822-E/SN) RoHS : Compliant | 200 | |||
| HDSP-4840 | Broadcom Limited | (Alt: HDSP-4840) RoHS : Compliant | 120 | |||
MCP4821-E/P![]() | Microchip Technology Inc | Digital to Analog Converter 1 Channel 12 bit Voltage Serial Microwire SPI 27 V to 55 V (Alt: MCP4821-E/P) RoHS : Compliant | 0 | |||
MCP4812T-E/MS![]() | Microchip Technology Inc | Digital to Analog Converter 2 Channels 10 bit Voltage Serial Microwire SPI 27 V to 55 V (Alt: MCP4812T-E/MS) RoHS : Compliant | 0 | |||
| MCP48FVB28-E/MQ | Microchip Technology Inc | Digital to Analog Converter 8 Channels 12 bit Voltage Serial I2C SPI 27 V to 55 V 20 Pins (Alt: MCP48FVB28-E/MQ) RoHS : Compliant | 0 | |||
| MCP48CMB11-E/UN | Microchip Technology Inc | Digital to Analog Converter 1 Channel 10 bit Voltage SPI 27 V to 55 V 10 Pins MSOP (Alt: MCP48CMB11-E/UN) RoHS : Compliant | 0 | |||
| MCP48CVB21-E/UN | Microchip Technology Inc | Digital to Analog Converter 1 Channel 12 bit Voltage SPI 27 V to 55 V 10 Pins MSOP (Alt: MCP48CVB21-E/UN) RoHS : Compliant | 0 | |||
| MCP48FVB01T-E/UN | Microchip Technology Inc | Digital to Analog Converter 1 Channel 8 bit Voltage SPI 27 V to 55 V 10 Pins MSOP (Alt: MCP48FVB01T-E/UN) RoHS : Compliant | 0 | |||
| MCP48FEB12T-E/UN | Microchip Technology Inc | DAC 2CH ResistorString 10Bit 10Pin MSOP TR (Alt: MCP48FEB12T-E/UN) RoHS : Compliant | 0 | |||
| MCP48FVB22T-E/UN | Microchip Technology Inc | Digital to Analog Converter 2 Channels 12 bit Voltage SPI 27 V to 55 V 10 Pins MSOP (Alt: MCP48FVB22T-E/UN) RoHS : Compliant | 0 | |||
| MCP48FEB08T-20E/ST | Microchip Technology Inc | DAC 8CH R2R 8Bit 20Pin TSSOP TR (Alt: MCP48FEB08T-20E/ST) RoHS : Compliant | 0 | |||
| IS31AP4833-QFLS2-TR | Lumissil Microsystems | (Alt: IS31AP4833-QFLS2-TR) RoHS : Compliant | 0 | |||
![]() Flip Electronics | NCP4810DR2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 272,500 | |
| TIP48TU | onsemi | Stock, Ship Today RoHS : Compliant |
| 11,714 | ||
| NTP4813NLG | onsemi | Stock, Ship Today |
| 11,050 | ||
| EFM32ZG222F32-B-QFP48 | Silicon Laboratories Inc | Stock, Ship Today RoHS : Compliant |
| 3,408 | ||
| MC908AP48CFBER | NXP Semiconductors | Stock | 3,000 | |||
| IXTP48N20TM | Littelfuse Inc | Stock | 2,000 | |||
TIP48![]() | onsemi | Stock RoHS : Compliant | 690 | |||
| IXTP48P05T | Littelfuse Inc | Stock RoHS : Compliant | 650 | |||
| EFM8UB20F32G-B-QFP48R | Silicon Laboratories Inc | Stock RoHS : Compliant | 281 | |||
![]() Master Electronics | DRC3P48D411R2 | Crydom Inc | Solid State Contactor - 18-30 VAC/DC Control Voltage Range - 7.6 A Maximum Load Current - 480 VAC Operating Voltage - Instantaneous Turn-On - 2 Controlled Legs - Solid State 1 N.O. + 1 N.C. - LED Input Status Indicator - DIN Rail Mounting. RoHS : Compliant |
| 10 | |
| SFIL-P488 | Thomas & Betts | PMAFIX - BFIL-P Fitting - Straight - PG Female Thread 48 - NC Size NW48 - Material Polyamide 6 - Color Grey - IP67 RoHS : Compliant |
| 0 | ||
| 2DD100P-48 | ITT Interconnect Solutions | 2DD100P-48 / 096265-0116 / Micro RoHS : Compliant |
| 0 | ||
| MCP48CVB24T-E/ML | Microchip Technology Inc | Quad Channel 12-Bit volatile SPI DAC RoHS : Compliant |
| 0 | ||
| MCP48FEB08T-20E/ST | Microchip Technology Inc | Octal Channel 8-Bit EEPROM SPI DAC RoHS : Compliant |
| 0 | ||
| MCP48FEB11-E/MF | Microchip Technology Inc | Single channel 10-bit nonvolatile SPI DAC RoHS : Compliant |
| 0 | ||
| MCP48FEB12T-E/MG | Microchip Technology Inc | Dual channel 10-bit nonvolatile SPI DAC RoHS : Compliant |
| 0 | ||
| MCP48FVB01T-E/UN | Microchip Technology Inc | Single channel 8-bit volatile SPI DAC RoHS : Compliant |
| 0 | ||
| MCP48FVB04T-E/MQ | Microchip Technology Inc | Quad Channel 8-Bit Volatile SPI DAC RoHS : Compliant |
| 0 | ||
| MCP48FVB08T-16E/ST | Microchip Technology Inc | Octal Channel 8-Bit Volatile SPI DAC RoHS : Compliant |
| 0 | ||
| MCP48FVB28-E/MQ | Microchip Technology Inc | Octal Channel 12-Bit Volatile SPI DAC RoHS : Compliant |
| 0 | ||
| MCP48FVB28T-E/MQ | Microchip Technology Inc | Octal Channel 12-Bit Volatile SPI DAC RoHS : Compliant |
| 0 | ||
| DRA3P48B22 | Crydom Inc | DRA3P Series DIN Rail Mount 3-Phase Solid State Contactor - Control Voltage 90-140 VAC - Max Input Current 8 mA - Output 48-510 VAC - Max Resistive Load Current 2.4 Amp - LED Input Status Indicator - 2 Controlled Legs RoHS : Compliant |
| 0 | ||
| DRC3P48D4112 | Crydom Inc | Solid State Contactor - 18-30 VAC/DC Control Voltage Range - 7.6 A Maximum Load Current - 480 VAC Operating Voltage - Zero Voltage Turn-On - 2 Controlled Legs - Solid State 1 N.O. + 1 N.C. - LED Input Status Indicator - DIN Rail Mounting. RoHS : Compliant |
| 0 | ||
| 5KP48CE3/TR13 | Microchip Technology Inc | Trans Voltage Suppressor Diode 500W 48V V(RWM) Bidirectional 1 Element Silicon DO-204AR RoHS : Compliant |
| 0 | ||
![]() Neutron USA | DRA3P48D4 | Crydom Inc | Solid State Relays - Industrial Mount DIN MNT 3PH 480VAC 4A 5VDC CNT ZC |
| 17 | |
| OD172SAP-48HHB10AZX | Orion Fans | DC Fan,48V 172 x 150 x 51mm,Reversible Flow |
| 12 | ||
| CP48WSBLY | Panduit Corp | Panduit CP48WSBLY Modular Patch Panel RoHS : Compliant |
| 3 | ||
| DRP-480-48 | Mean Well | DIN Rail Power Supplies 480W 48V 10A, PFC, Adj Output, free air, Enclosed, 180 ~ 264VACin RoHS : Compliant |
| 0 | ||
| APP480G1BN-02PTD | Apacer Technology Inc | Solid State Drives - SSD 480 GB - 3.3 V |
| 0 | ||
| HBG-100P-48B | Mean Well | LED Power Supplies 96W 48V 2A CC adj by cable RoHS : Compliant |
| 0 | ||
| ICMPP48T2C | International Components Corporation | PATCH PANEL, TELCO, 8P2C, 48-PORT, 2RMS |
| 0 | ||
| HEP-480-48A | Mean Well | Switching Power Supplies 48V 10A 480W RoHS : Compliant |
| 0 | ||
| OD172SAP-48HBXCIP68 | Orion Fans | DC Fans DC Fan, 172x151x51mm, 48VDC, 323CFM, 1.03A, 4400RPM, High Performance, IP68 Rated |
| 0 | ||
| ICMPP48TF2 | International Components Corporation | PATCH PANEL,F/TELCO,8P2C,48-PORT,2RM |
| 0 | ||
| DPP480241 | TDK-Lambda Corporation | DIN Rail Power Supplies 480W 24V 20A DIN Rail 115/230VAC |
| 0 | ||
| DRC3P48C411R2 | Crydom Inc | Solid State Relays - Industrial Mount SSR Contactor, 3-Phase, DIN Rail Mnt., 480VAC/7.6A, 48VAC/DC In, 1NO+1NC, RN, 2L |
| 0 | ||
| ICMPP4860V | International Components Corporation | Patch Panel, CAT 6, 48-Port, 2 RMS, 6 Pack of ICMPP04860 |
| 0 | ||
| HEP-480-36A | Mean Well | Switching Power Supplies 36V 13.3A 478.8W RoHS : Compliant |
| 0 | ||
| ASP48MKUSX-25 | Targus | Targus DEFCON KL Master Keyed Cable Lock - Pack of 25 |
| 0 | ||
![]() Pasternack Enterprises US | PE3C1830/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to BNC Male (Plug) Low Loss Cable 48 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to BNC male (plug) low loss cable 48 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a BNC cable connection on the other. Our low loss SMA to BNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C1830/WP-48 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1830/WP-48 RF cable has a PE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to BNC male cable has a maximum VSWR of 1.4:1. SMA plug to BNC plug cable assembly PE3C1830/WP-48 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C1830/WP-48 can also be used in the other direction and will be a BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA Waterproof and BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 340 | |
| PE3C3055/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male (Plug) to SMA Male (Plug) Low Loss Cable 48 Inch Length Using LMR-195 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male (plug) to SMA male (plug) low loss cable 48 inch length using LMR-195 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss SMA to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C3055/WP-48 can also be known as a low loss SMA plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3055/WP-48 RF cable has a PE jacket of 0.195-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 80% and a minimum RF shielding of 90 dB. Our SMA male to SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C3055/WP-48 is built with LMR-195 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 170 | ||
| PE3W11736/SP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-200-FR, RF Cable Type: LMR-200-FR, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-200-FR Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 48 inch length using LMR-200-FR coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 48 inch length using LMR-200-FR coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W11736/SP-48 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W11736/SP-48 RF cable has a FRPE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 165 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3W11736/SP-48 is built with LMR-200-FR which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 107 | ||
| PE3W02246/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 SMA Male to TNC Male Right Angle Low Loss Cable 48 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 SMA male to TNC male right angle low loss cable 48 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a right angle TNC cable connection on the other. Our low loss SMA to right angle TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3W02246/WP-48 can also be known as a low loss SMA plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02246/WP-48 RF cable has a PE jacket of 0.240-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our SMA male to right angle TNC male cable has a maximum VSWR of 1.4:1. SMA plug to TNC plug cable assembly PE3W02246/WP-48 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible SMA cable assembly is manufactured with SMA to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a passivated stainless steel body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W02246/WP-48 can also be used in the other direction and will be a right angle TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 98 | ||
| PE3C6912/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 4.3-10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 4.3-10 Male (Plug) to SMA Male (Plug) Low Loss Cable 48 Inch Length Using LMR-240 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 4.3-10 male (plug) to SMA male (plug) low loss cable 48 inch length using LMR-240 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 4.3-10 to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a 4.3-10 cable connection on one end and a SMA cable connection on the other. Our low loss 4.3-10 to SMA IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C6912/WP-48 can also be known as a low loss 4.3-10 plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C6912/WP-48 RF cable has a PE jacket of 0.240-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our 4.3-10 male to SMA male cable has a maximum VSWR of 1.4:1. 4.3-10 plug to SMA plug cable assembly PE3C6912/WP-48 is built with LMR-240 which is a flexible coax type. The Pasternack IP68 flexible 4.3-10 cable assembly is manufactured with 4.3-10 to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C6912/WP-48 can also be used in the other direction and will be a SMA male to 4.3-10 male cable assembly if the opposite connectivity is required. Low loss 4.3-10 plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to SMA cable assembly for quick shipment worldwide. Variations of 4.3-10 Waterproof and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 4.3-10 to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 38 | ||
| PE3C10354/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: TCOM-400, RF Cable Type: TCOM-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 7/16 DIN Male (Plug) to N Male (Plug) Low PIM Cable 48 Inch Length Using TCOM-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 7/16 DIN male (plug) to N male (plug) low PIM cable 48 inch length using TCOM-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 7/16 DIN to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a 7/16 DIN cable connection on one end and a type N cable connection on the other. Our low PIM 7/16 DIN to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C10354/WP-48 can also be known as a low PIM 7/16 DIN plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10354/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 100 dB. Our 7/16 DIN male to type N male cable has a maximum VSWR of 1.4:1. 7/16 DIN plug to type N plug cable assembly PE3C10354/WP-48 is built with TCOM-400 which is a flexible coax type. The Pasternack IP68low passive intermodulation flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a clamp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. PE3C10354/WP-48 can also be used in the other direction and will be a type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low PIM 7/16 DIN plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to type N cable assembly for quick shipment worldwide. Variations of 7/16 DIN Waterproof and type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 7/16 DIN to type N low PIM RF cable assembly as per your requirements. |
| 13 | ||
| PE3C0033LF/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to N Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax, LF Solder., Radio frequency assembly waterproof IP68 N male (plug) to N male (plug) low loss cable 48 inch length using LMR-400 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0033LF/WP-48 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0033LF/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0033LF/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C0046/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to N Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax., Radio frequency assembly waterproof IP68 N male (plug) to N male (plug) low loss cable 48 inch length using LMR-400 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C0046/WP-48 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0046/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0046/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C3952/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to N Female (Jack) Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to N female (jack) low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N IP68 cable assembly has a male gender on end 1 and a female on end 2. PE3C3952/WP-48 can also be known as a low loss type N plug to type N jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3952/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to type N female cable has a maximum VSWR of 1.4:1. Type N plug to type N jack cable assembly PE3C3952/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C3952/WP-48 can also be used in the other direction and will be a type N female to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2483/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Female (Jack) to TNC Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N female (jack) to TNC male (plug) low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss type N to TNC IP68 cable assembly has a female gender on end 1 and a male on end 2. PE3C2483/WP-48 can also be known as a low loss type N jack to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2483/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N female to TNC male cable has a maximum VSWR of 1.4:1. Type N jack to TNC plug cable assembly PE3C2483/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2483/WP-48 can also be used in the other direction and will be a TNC male to type N female cable assembly if the opposite connectivity is required. Low loss type N jack to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W01954/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male Right Angle to TNC Male Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male right angle to TNC male low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a TNC cable connection on the other. Our low loss right angle type N to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3W01954/WP-48 can also be known as a low loss right angle type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01954/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our right angle type N male to TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3W01954/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with right angle type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W01954/WP-48 can also be used in the other direction and will be a TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2638/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 TNC Male to TNC Male Right Angle Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 TNC male to TNC male right angle low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a TNC cable connection on one end and a right angle TNC cable connection on the other. Our low loss TNC to right angle TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3C2638/WP-48 can also be known as a low loss TNC plug to right angle TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2638/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our TNC male to right angle TNC male cable has a maximum VSWR of 1.4:1. TNC plug to TNC plug cable assembly PE3C2638/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2638/WP-48 can also be used in the other direction and will be a right angle TNC male to TNC male cable assembly if the opposite connectivity is required. Low loss TNC plug to TNC right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC Waterproof cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W03264/SP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male Right Angle to MCX Plug Right Angle Low Loss Cable 48 Inch Length Using LMR-100 Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to MCX plug right angle low loss cable 48 inch length using LMR-100 coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to MCX plug right angle low loss cable 48 inch length using LMR-100 coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to MCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle MCX cable connection on the other. Our low loss right angle SMA to right angle MCX cable assembly has a male gender on end 1 and a plug on end 2. PE3W03264/SP-48 can also be known as a low loss right angle SMA plug to right angle MCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W03264/SP-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 60 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle MCX plug cable has a maximum VSWR of 1.4:1. SMA plug to MCX male cable assembly PE3W03264/SP-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle MCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W03264/SP-48 can also be used in the other direction and will be a right angle MCX plug to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to MCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to MCX cable assembly for quick shipment worldwide. Variations of SMA and MCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to MCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W00013/WP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Ingress Protection (IP) Rating: IP68, Length, Max: 48 inches. Waterproof IP68 N Male (Plug) to TNC Male (Plug) Low Loss Cable 48 Inch Length Using LMR-400 Coax with Times Microwave Components., Radio frequency assembly waterproof IP68 N male (plug) to TNC male (plug) low loss cable 48 inch length using LMR-400 coax with Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The Waterproof (when mated) like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a TNC cable connection on the other. Our low loss type N to TNC IP68 cable assembly has a male gender on end 1 and a male on end 2. PE3W00013/WP-48 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 4-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W00013/WP-48 RF cable has a PE jacket of 0.405-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to TNC male cable has a maximum VSWR of 1.4:1. Type N plug to TNC plug cable assembly PE3W00013/WP-48 is built with LMR-400 which is a flexible coax type. The Pasternack IP68 flexible type N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W00013/WP-48 can also be used in the other direction and will be a TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N Waterproof and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to TNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C1074/SP-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. MMCX Plug Right Angle to MMCX Plug Right Angle Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink and 90 Deg. Clock., Radio frequency assembly MMCX plug right angle to MMCX plug right angle low loss cable 48 inch length using LMR-100 coax with heatshrink and 90 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The MMCX plug right angle to MMCX plug right angle low loss cable 48 inch length using LMR-100 coax with heatshrink and 90 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom MMCX to MMCX cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle MMCX cable connection on one end and a right angle MMCX cable connection on the other. Our low loss right angle MMCX to right angle MMCX cable assembly has a plug gender on end 1 and a plug on end 2. PE3C1074/SP-48 can also be known as a low loss right angle MMCX male to right angle MMCX male cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1074/SP-48 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our right angle MMCX plug to right angle MMCX plug cable has a maximum VSWR of 1.4:1. MMCX male to MMCX male cable assembly PE3C1074/SP-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible MMCX cable assembly is manufactured with right angle MMCX to right angle MMCX cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss MMCX right angle male to MMCX right angle male cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality MMCX to MMCX cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal MMCX to MMCX low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
![]() Venkel Ltd. | UPTF0402-16W-P-4810UT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;481R;�0.01% RoHS : Compliant | 0 | ||
| UPTF0402-16W-P-4811CT | VENKEL LTD | Ultra Precision Thin Film CR;0402;1/16W;�5PPM;4.81K;�0.25% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-4811DT | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;4.81K;�0.5% RoHS : Compliant | 0 | |||
| UPTF0603-16W-P-48R1DT-1K | VENKEL LTD | Ultra Precision Thin Film CR;0603;1/16W;�5PPM;48.1R;�0.5% RoHS : Compliant | 0 | |||
| UPTF0805-10W-P-4870AT | VENKEL LTD | Ultra Precision Thin Film CR;0805;1/10W;�5PPM;487R;�0.05% RoHS : Compliant | 0 | |||
| UPTF2010-2W-P-4872BT | VENKEL LTD | Ultra Precision Thin Film CR;2010;1/2W;�5PPM;48.7K;�0.1% RoHS : Compliant | 0 | |||
| UPTF2512-2W-P-4810CT | VENKEL LTD | Ultra Precision Thin Film CR;2512;1/2W;�5PPM;481R;�0.25% RoHS : Compliant | 0 | |||
| MELFC0204-ZP-4871BT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�5PPM;4.87K;�0.1% RoHS : Compliant | 0 | |||
| MELFC0207-VP-48R7BT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�5PPM;48.7R;�0.1% RoHS : Compliant | 0 | |||
| HPTF0603-QP-4870UT | VENKEL LTD | High Power Thin Film CR;0603;1/10W;�5PPM;487R;�0.01% RoHS : Compliant | 0 | |||
| HPTF1206-TP-4870DT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�5PPM;487R;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-TP-4872BT | VENKEL LTD | MELF Coated Thin Film CR;0204;1/4W;�5PPM;48.7K;�0.1% RoHS : Compliant | 0 | |||
| HPTF1210-UP-4871CT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�5PPM;4.87K;�0.25% RoHS : Compliant | 0 | |||
| HPTF2010-UP-4872CT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�5PPM;48.7K;�0.25% RoHS : Compliant | 0 | |||
| HPTF2010-UP-48R7AT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�5PPM;48.7R;�0.05% RoHS : Compliant | 0 | |||
![]() Vyrian | XC2VP4-8FG256C![]() | AMD Xilinx | Field Programmable Gate Array, 752 CLBs, CMOS, PBGA256 RoHS : Not Compliant | 3,889 | ||
XC2VP4-8FFG672I![]() | AMD Xilinx | Field Programmable Gate Array, 752 CLBs, CMOS, PBGA672 RoHS : Compliant | 3,605 | |||
XC2VP4-8FFG672C![]() | AMD Xilinx | Field Programmable Gate Array, 752 CLBs, CMOS, PBGA672 RoHS : Compliant | 3,247 | |||
XC2VP4-8FF672C![]() | AMD Xilinx | Field Programmable Gate Array, 752 CLBs, CMOS, PBGA672 RoHS : Not Compliant | 2,609 | |||
XC2VP4-8FF672I![]() | AMD Xilinx | Field Programmable Gate Array, 752 CLBs, CMOS, PBGA672 RoHS : Not Compliant | 2,282 | |||
| ZWS150BP48/TA | TDK Corporation | Power Supply Module RoHS : Compliant | 842 | |||
| ZWS150BP48/L | TDK Corporation | AC-DC Regulated Power Supply Module, 153.6W RoHS : Compliant | 790 | |||
| ZWS150BP-48 | TDK Corporation | Power Supply Module RoHS : Unknown | 742 | |||
| ZWS150BP48/A | TDK Corporation | AC-DC Regulated Power Supply Module, 153.6W RoHS : Compliant | 734 | |||
| ZWS150BP48/TL | TDK Corporation | Power Supply Module RoHS : Compliant | 662 | |||
| ZWS150BP48/T | TDK Corporation | Power Supply Module RoHS : Compliant | 660 | |||
| ZWS240BP48/L | TDK Corporation | AC-DC Regulated Power Supply Module, 240W RoHS : Compliant | 631 | |||
| ZWS240BP-48 | TDK Corporation | Power Supply Module RoHS : Compliant | 545 | |||
| ZWS150BP48 | TDK Corporation | Power Supply Module RoHS : Compliant | 454 | |||
| ZWS240BP48 | TDK Corporation | Power Supply Module RoHS : Compliant | 309 | |||
![]() Win Source Electronics | SP485EEN-L/R | Exar Corporation |
| 118,410 | ||
| HT1621B-LQFP48 | Holtek Semiconductor Inc |
| 45,380 | |||
SP485EN-L/TR![]() | Exar Corporation | IC TXRX RS485 HALF DUPLEX 8SOIC RoHS : Compliant |
| 27,670 | ||
AP4800BGM-HF![]() | Advanced Power Electronics Corp | Simple Drive Requirement, Low On-resistance |
| 26,393 | ||
| EFM32ZG222F32-B-QFP48R | Silicon Laboratories Inc | IC MCU 32BIT 32KB FLASH 48TQFP / ARM® Cortex®-M0+ series Microcontroller IC 32-Bit Single-Core 24MHz 32KB (32K x 8) FLASH 48-TQFP (7x7) RoHS : Compliant |
| 24,000 | ||
| SP485EEN | Exar Corporation | IC TXRX RS485 HALF DUPLEX 8SOIC RoHS : Not Compliant |
| 20,000 | ||
MCP4821T-E/SN![]() | Microchip Technology Inc | IC DAC 12BIT V-OUT 8SOIC / 12 Bit Digital to Analog Converter 1 8-SOIC RoHS : Compliant |
| 13,000 | ||
| EFM32G222F128G-E-QFP48R | Silicon Laboratories Inc | IC MCU 32BIT 128KB FLASH 48TQFP / ARM® Cortex®-M3 series Microcontroller IC 32-Bit Single-Core 32MHz 128KB (128K x 8) FLASH 48-TQFP (7x7) RoHS : Compliant |
| 11,863 | ||
| ACPL-P480-500E | Broadcom Limited | OPTOISO 3.75KV PUSH PULL 6SO RoHS : Compliant |
| 10,000 | ||
MCP4822T-E/MS![]() | Microchip Technology Inc | RoHS : Compliant |
| 9,000 | ||
| HSMP-4890-TR1G | Broadcom Limited | DIODE PIN SW LOW INDUCT SOT-23 RoHS : Compliant |
| 6,941 | ||
| EFM8UB20F64G-B-QFP48R | Silicon Laboratories Inc | IC MCU 8BIT 64KB FLASH 48TQFP / CIP-51 8051 Universal Bee Microcontroller IC 8-Bit 48MHz 64KB (64K x 8) FLASH 48-TQFP (7x7) RoHS : Compliant |
| 5,840 | ||
AP4800BGM![]() | Advanced Power Electronics Corp | Trans MOSFET N-CH 30V 9.6A 8-Pin SOIC |
| 3,000 | ||
OP484FS-REEL7![]() | Analog Devices Inc | Precision Rail-to-Rail Input and Output Operational Amplifiers RoHS : Not Compliant |
| 2,790 | ||
OP484FSZ![]() | Analog Devices Inc | IC OPAMP GP 4.25MHZ RRO 14SO RoHS : Compliant |
| 1,166 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |