| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
S260G-R Reseller |
| Reseller | No. de pieza | Fabricante Electrónico | Descripción Electrónicos | Price | Qty. BuyNow | |
![]() TME | BNS 260-02Z-ST-L | Schmersal | Safety switch: magnetic; BNS 260; NC x2; IP67; Electr.connect: M8 |
| 52 | |
| BNS 260-02Z-R | Schmersal | Safety switch: magnetic; BNS 260; NC x2; IP67; plastic; -25÷70°C |
| 16 | ||
| BNS 260-02/01Z-ST-L | Schmersal | Safety switch: magnetic; BNS 260; NC x2; IP67; Electr.connect: M8 |
| 10 | ||
| 302S-260-2 | IRIMO | Upper jaw |
| 0 | ||
| DFLS260Q-7 | Diodes Incorporated | Diode: Schottky rectifying; PowerDI®123; SMD; 60V; 2A; reel,tape RoHS : Compliant |
| 0 | ||
| PTNS2-6010M-B100 | Same Sky | Potentiometer: slide; 100kΩ; 250mW; THT; ±20%; linear; metal; carbon |
| 0 | ||
| QT161S-26.000MAHB-T | QST Corporation | Crystal; 26MHz; SMD; 1.6x1.2x0.35mm; 6pF; Freq.stability: ±30ppm |
| 0 | ||
| QT161S-26.000MEIB-T | QST Corporation | Crystal; 26MHz; SMD; 1.6x1.2x0.35mm; 6pF; Freq.stability: ±20ppm |
| 0 | ||
| EOS2 605 A | ReeR spa | Safety light curtain; H: 610mm; 12m; EOS2 A; Resolution: 50mm |
| 0 | ||
| IFS260 | ifm efector inc | Sensor: inductive |
| 0 | ||
| PTNS2-6020M-B10 | Same Sky | Potentiometer: slide; 10kΩ; 250mW; THT; ±20%; linear; metal; carbon |
| 0 | ||
| PTNS2-605P-B100 | Same Sky | Potentiometer: slide; 100kΩ; 250mW; THT; ±20%; linear; metal; carbon |
| 0 | ||
| QT161S-26.000MDDY-T | QST Corporation | Crystal; 26MHz; SMD; 1.6x1.2x0.35mm; 7pF; Freq.stability: ±20ppm |
| 0 | ||
| QT216S-26.000MAHJ-T | QST Corporation | Crystal; 26MHz; SMD; 2x1.6x0.5mm; 18pF; Freq.stability: ±30ppm |
| 0 | ||
| QT252S-26.000MAHQ-T | QST Corporation | Crystal; 26MHz; SMD; 2.5x2x0.55mm; 10pF; Freq.stability: ±30ppm |
| 0 | ||
![]() Avnet Americas | MBRS260T3G | onsemi | - Tape and Reel (Alt: MBRS260T3G) RoHS : Compliant |
| 1,202,500 | |
| DFLS260-7 | Diodes Incorporated | - Tape and Reel (Alt: DFLS260-7) RoHS : Compliant |
| 60,000 | ||
| MPZ1608S260ATAH0 | TDK Corporation | - Tape and Reel (Alt: MPZ1608S260ATAH0) RoHS : Compliant |
| 20,000 | ||
| MURS260-E3/5BT | Vishay Intertechnologies | 2A, 600V, 50NS, SMB UF RECT. SMD - Tape and Reel (Alt: MURS260-E3/5BT) RoHS : Compliant |
| 12,800 | ||
ABLS2-6.000MHZ-D4Y-T![]() | Abracon Corporation | Crystal, Surface Mount, 6 MHz, SMD, 11.4mm x 4.7mm, 30 ppm, 18 pF, 30 ppm, ABLS2 Series - Tape and Reel (Alt: ABLS2-6.000MHZ-D4Y-T) RoHS : Compliant |
| 5,000 | ||
| MURS260T3G | onsemi | - Tape and Reel (Alt: MURS260T3G) RoHS : Compliant |
| 5,000 | ||
| ECS-260-8-36-CKY-TR | ECS International Inc | Crystal Fundamental 26MHz 8pF ?10ppm ?10ppm 4-Pin CSMD T/R - Tape and Reel (Alt: ECS-260-8-36-CKY-TR) RoHS : Compliant |
| 1,000 | ||
| MTMM-102-04-T-S-260 | Samtec Inc | - Bulk (Alt: MTMM-102-04-T-S-260) RoHS : Compliant |
| 0 | ||
| MTLW-114-07-G-S-260 | Samtec Inc | - Bulk (Alt: MTLW-114-07-G-S-260) RoHS : Compliant |
| 0 | ||
| ECS-260-10-36-CKL-TR | ECS International Inc | - Tape and Reel (Alt: ECS-260-10-36-CKL-TR) RoHS : Compliant |
| 0 | ||
| ECS-260-12-33Q-JES-TR | ECS International Inc | - Tape and Reel (Alt: ECS-260-12-33Q-JES-TR) RoHS : Compliant |
| 0 | ||
| ECS-260-18-30-GM-TR | ECS International Inc | - Tape and Reel (Alt: ECS-260-18-30-GM-TR) RoHS : Compliant |
| 0 | ||
| ATS260ASM-1E | CTS Corporation | - Tape and Reel (Alt: ATS260ASM-1E) RoHS : Compliant |
| 0 | ||
| AMMLPEBVRS-26.0000T | Abracon Corporation | OSCILLATOR 7050 4-SMD 26MHZ 25PPM -40C ~ 125C CMOS 3.3V - Tape and Reel (Alt: AMMLPEBVRS-26.0000T) RoHS : Compliant |
| 0 | ||
| MMSD-25-24C-S-26.00-S-K | Samtec Inc | Mini-Mate Cable Assembly, 0.100" Pitch - Bulk (Alt: MMSD-25-24C-S-26.00-S-K) RoHS : Compliant |
| 0 | ||
![]() Newark | MTMM-102-04-T-S-260 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 2Pos; |Samtec, Inc. MTMM-102-04-T-S-260 RoHS : Compliant |
| 2,150 | |
| MTLW-104-23-G-S-260 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 4Pos; |Samtec, Inc. MTLW-104-23-G-S-260 RoHS : Compliant |
| 1,262 | ||
| QT161S-26.000MAAV-T | TXC Corporation | Xtal, 26Mhz, 8Pf, Smd, 1.6Mm X 1.2Mm; |Txc QT161S-26.000MAAV-T RoHS : Compliant |
| 500 | ||
| QT161S-26.000MAAV-T | TXC Corporation | Xtal, 26Mhz, 8Pf, Smd, 1.6Mm X 1.2Mm; |Txc QT161S-26.000MAAV-T RoHS : Compliant |
| 500 | ||
| QT252S-26.000MAAE-T | TXC Corporation | Xtal, 26Mhz, Smd, 2.5Mm X 2Mm, 30Ppm; |Txc QT252S-26.000MAAE-T RoHS : Compliant |
| 500 | ||
| TW-07-07-T-S-260-245 | Samtec Inc | Conn Stack Brd, 2Mm, 7Pos, Hdr; |Samtec, Inc. TW-07-07-T-S-260-245 RoHS : Compliant |
| 459 | ||
| MTLW-114-07-G-S-260 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 14Pos; |Samtec, Inc. MTLW-114-07-G-S-260 RoHS : Compliant |
| 439 | ||
| MTLW-120-07-G-S-260 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 20Pos; |Samtec, Inc. MTLW-120-07-G-S-260 RoHS : Compliant |
| 439 | ||
| ZW-02-09-L-S-260-240 | Samtec Inc | Conn Stack Brd, 2.54Mm, 2Pos, Hdr; |Samtec, Inc. ZW-02-09-L-S-260-240 RoHS : Compliant |
| 395 | ||
| MTMM-114-07-S-S-260 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 14Pos; |Samtec, Inc. MTMM-114-07-S-S-260 RoHS : Compliant |
| 335 | ||
| DWM-05-01-T-S-260 | Samtec Inc | Conn Stack Brd, 1.27Mm, 5Pos, Hdr; |Samtec, Inc. DWM-05-01-T-S-260 RoHS : Compliant |
| 251 | ||
| DW-08-17-T-S-260 | Samtec Inc | Conn Stack Brd, 2.54Mm, 8Pos, Hdr; |Samtec, Inc. DW-08-17-T-S-260 RoHS : Compliant |
| 244 | ||
| B82725S2602N041 | TDK Corporation | Power Line Choke, Ring Core, 7.8Mh, 6A; |Tdk B82725S2602N041 RoHS : Compliant |
| 78 | ||
| QT49S-26.000MAHJ-T | TXC Corporation | Xtal, 26Mhz, 18Pf, Smd, 12.7Mm X 4.8Mm; |Txc QT49S-26.000MAHJ-T RoHS : Compliant |
| 73 | ||
| S260 | Switchcraft Conxall | Littel Plug, Rohs Rohs Compliant: Yes |Switchcraft/conxall S260 RoHS : Compliant |
| 0 | ||
![]() RS | MS260-50.0K-1% | Caddock Electronics Inc | RESISTOR, FILM, POWER, AXIAL, 50 KILOHM, 1%, 6W, 2KV |
| 198 | |
| BPS260-1 (101184395) | Schmersal | MAGNETIC SAFETY SENSOR ACTUATOR, 36 X 26 X 13 MM, 101184395, BPS SERIES |
| 131 | ||
| S2609 | Lapp Group | CABLE GLAND, M16X1.5, RANGE 0.079-0.276", POLYAMIDE, RUBBER SEAL, SKINTOP SERIES |
| 84 | ||
| S260 | Switchcraft Conxall | PLUG PHONE 3 SCREW 0.206 2.7 IN. 0.206 IN. RoHS : Compliant |
| 45 | ||
| BNS260-02Z-ST-R (101184361) | Schmersal | SAFETY SENSOR, CODED MAGNET, 2) NC CONTACTS, RIGHT HAND DOOR, INTGRTD CONNECTO |
| 34 | ||
| RSS260-D-ST (103003602) | Schmersal | RFID SAFETY SENSOR, M8 CONNECTOR, LED, COMPACT DESIGN |
| 28 | ||
| BNS260-02/01Z-ST-L (101184378) | Schmersal | SAFETY SENSOR, CODED MAGNET, 2) NC CONTACTS,1) NC SIGNALING CONTACT, LFT HND DOO |
| 11 | ||
| M2SS2-60B01 | ABB Low Voltage Products and Systems | 2POS KNOB A-C BLK CMR 1NC MAIN |
| 3 | ||
| BNS 260-02/01Z-R 5,0M | Schmersal | THERMOPLASTIC ENCLOSURE, SMALL BODY, CONCEALED MOUNTING POSSIBLE |
| 3 | ||
| BNS260-11/01ZG-ST-L (101184384) | Schmersal | SAFETY SENSOR, CODED MAGNET, 1)NO/1)NC CONTACTS, SIGNALING CONTACT, LED, LH DOOR |
| 3 | ||
| MJS2-60B | ABB Low Voltage Products and Systems | JS 2-POS MOM |
| 2 | ||
| M3SS2-60B20 | ABB Low Voltage Products and Systems | 3POS SW MOM BLK KNOB 2-NO |
| 1 | ||
| 3RS26002BA30 | Siemens | TEMPERATURE MONITORING RELAY ;3RS26002BA30 |
| 1 | ||
| BNS260 SPACER PLATE (101184643) | Schmersal | SPACER PLATE, FOR BNS260 CODED MAGNET SAFETY SENSOR |
| 1 | ||
| BHS0030 (BES 516-300-S260-S4-D) | Balluff Inc | PROXIMITY SENSOR, BES 516-300-S260-S4-D |
| 1 | ||
![]() Microchip Technology Inc | UES2603 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 861 | |
| UES2605HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 284 | ||
| UES2606HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 242 | ||
| UES2606 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 79 | ||
| UES2602 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 17 | ||
| UES2604 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2601 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2605R | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2604R | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2606R | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2603R | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2601R | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2603E3 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2051-09-21 - Contact for Pricing RoHS : Compliant | 0 | |||
| UES2602HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| UES2606RHR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
![]() Bisco Industries | DLCBS2-6-01 | Essentra Components | 2,902 | |||
| 0827-S-26012 | MISC. VIBRATION MOUNTS & BUMPERS | 1,687 | ||||
![]() Rochester Electronics | MBRS260T3G | onsemi | Rectifier Single Schottky 60V 2A SMB T/R RoHS : Compliant |
| 100,000 | |
| NRVBS260NT3G | onsemi | Rectifier Single Schottky 60V 2A SMB T/R RoHS : Compliant |
| 64,500 | ||
| IRS26072DSTRPBF | Infineon Technologies AG | Gate Driver RoHS : Compliant |
| 11,702 | ||
| CY90352ESPMC-GS-260E1 | Infineon Technologies AG | IC MCU F²MC-16LX 16Bit 1 Core Mask ROM 128kB (128k x 8) 24MHz 64-QFP RoHS : Compliant |
| 707 | ||
| IAUS260N10S5N019TATMA1 | Infineon Technologies AG | IAUS260N10S5N019T - MOSFET_(75V,120V( RoHS : Compliant |
| 4 | ||
| IRS26072DSPBF | Infineon Technologies AG | Half Bridge Based Peripheral Driver, CMOS, PDSO8 RoHS : Compliant |
| 95 | ||
SN74S260N3![]() | Texas Instruments | Logic IC NOR Gate 2 Element 5V 14-DIP Tube RoHS : Not Compliant |
| 451 | ||
SNJ54S260J![]() | Texas Instruments | Logic IC NOR Gate 2 Element 5V 14-DIP Tube RoHS : Not Compliant |
| 200 | ||
SN74S260N![]() | Texas Instruments | Logic IC NOR Gate 2 Element 5V 14-DIP Tube RoHS : Not Compliant |
| 17,280 | ||
| BBS2600BPBR | Intel Corporation | Embedded Computer Accessory, Board, Carton |
| 638 | ||
IRS26072DSPBF![]() | International Rectifier | Half Bridge Based Peripheral Driver, CMOS, PDSO8 RoHS : Compliant |
| 95 | ||
IRS2608DSPBF![]() | International Rectifier | Half Bridge Based Peripheral Driver, 0.35A, CMOS, PDSO8 RoHS : Compliant |
| 7,087 | ||
IRS2609DSPBF![]() | International Rectifier | Half Bridge Based MOSFET Driver, 0.2A, CMOS, PDSO8 RoHS : Compliant |
| 2,908 | ||
| ISL6125IRS2604 | Intersil Corporation | Power Supply Power Supply Sequencer 24-QFN RoHS : Not Compliant |
| 828 | ||
| DM54LS260W/883 | National Semiconductor Corporation | NOR Gate, LS Series, 2-Func, 5-Input, TTL, CDFP14 RoHS : Not Compliant |
| 8 | ||
![]() Sager | MTMM-102-04-T-S-260 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 2,150 | |
| MTLW-104-23-G-S-260 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 1,262 | ||
| MTLW-114-07-G-S-260 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 439 | ||
| MTMM-114-07-S-S-260 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 335 | ||
| S260 | Switchcraft Conxall | Phone Connectors 3 COND.206BLACK RoHS : Compliant |
| 0 | ||
| MTLW-139-07-F-S-260 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-104-14-S-S-260 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MMSD-25-24C-S-26.00-S-K | Samtec Inc | Rectangular Cable Assemblies Mini-Mate Cable Assembly, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| MTSW-107-08-F-S-260 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TW-23-02-T-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-26-02-G-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-29-03-G-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-30-09-F-S-260-090 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-32-03-G-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-35-02-S-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
![]() Ameya Holding Limited | NTS260ESFT1G | onsemi | 2A 60V LOW LEAKAGE TRENC RoHS : Compliant | 10,320 | ||
| MBRS260T3G | onsemi | MBRS Series 2 A 60 V Surface Mount Schottky Power Rectifier RoHS : Compliant | 2,970 | |||
![]() ComSIT USA | 7100ROS260 | FIRST CABLE LINE INC | AVAILABLE EU | 14,250 | ||
![]() ComSIT USA | NRVBS260T3G | onsemi | Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 60V V(RRM), Silicon, DO-214AA RoHS : Compliant | 26,902 | ||
| OGS260 | omega | Electronic Component RoHS : Not Compliant | 12,000 | |||
| LGS260DOH | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED, Green, Diffused, 2.9mm RoHS : Not Compliant | 8,624 | |||
| GTCSSPM113LQLS260350R18 | OSRAM GmbH | Single Color LED RoHS : Compliant | 6,000 | |||
| B72500E5170S260 | TDK Electronics | SMD MULTILAYER VARISTOR Varistor, 22V, 0.075J, Surface Mount RoHS : Compliant | 4,000 | |||
| LGS260DO | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED, Green, Diffused, T-1, 2.9mm RoHS : Compliant | 3,000 | |||
IRS2607DSTRPBF![]() | International Rectifier | HIGH AND LOW SIDE DRIVER Full Bridge Based MOSFET Driver, 0.2A, CMOS, PDSO8 RoHS : Compliant | 2,500 | |||
| LGS260DOJ | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED, Green, Diffused, 2.9mm RoHS : Not Compliant | 1,995 | |||
| LYS260DOGEG | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED, Yellow, Diffused, 2.9mm RoHS : Not Compliant | 1,330 | |||
| LGS260D0GEGURT | Siemens | Electronic Component RoHS : Not Compliant | 960 | |||
| LYS260DO | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED, Yellow, Diffused, 2.9mm RoHS : Not Compliant | 640 | |||
| NRVTS260ESFT1G | onsemi | Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 60V V(RRM), Silicon RoHS : Compliant | 90 | |||
| DV8526515S2600RA | dev | Electronic Component RoHS : Compliant | 88 | |||
S2600M![]() | RCA | SILICON CONTROLLED RECTIFIER Silicon Controlled Rectifier, 7A I(T)RMS, 600V V(DRM), 600V V(RRM), 1 Element, TO-5 RoHS : Not Compliant | 30 | |||
![]() Interstate Connecting Components | 55PC0221-18-6/9CS2601 | TE Connectivity | 55PC0221-18-6/9CS2601 | 0 | ||
| 55PC0221-24-6/9CS2601 | TE Connectivity | 55PC0221-24-6/9CS2601 | 0 | |||
| 55PC0222-22-6/9CS2604 | TE Connectivity | 55PC0222-22-6/9CS2604 | 0 | |||
| 55PC0232-8-3/6/9CS2605 | TE Connectivity | 55PC0232-8-3/6/9CS2605 | 0 | |||
| 55PC0211-4-9CS2600 | TE Connectivity | 55PC0211-4-9CS2600 | 0 | |||
| 55PC0211-16-9CS2600 | TE Connectivity | 55PC0211-16-9CS2600 | 0 | |||
| 55PC0222-16-6/9CS2604 | TE Connectivity | 55PC0222-16-6/9CS2604 | 0 | |||
| 55PC0222-14-6/9CS2604 | TE Connectivity | 55PC0222-14-6/9CS2604 | 0 | |||
| 55PC0231-16-3/6/9CS260 | TE Connectivity | 55PC0231-16-3/6/9CS2602 | 0 | |||
| 55PC0221-20-6/9CS2601 | TE Connectivity | 55PC0221-20-6/9CS2601 | 0 | |||
| 55PC0232-6-3/6/9CS2605 | TE Connectivity | 55PC0232-6-3/6/9CS2605 | 0 | |||
| 55PC1111-22-9-9CS2606 | TE Connectivity | 55PC1111-22-9-9CS2606 | 0 | |||
| 55PC0211-18-9CS2600 | TE Connectivity | 55PC0211-18-9CS2600 | 0 | |||
| 55PC0212-16-9CS2603 | TE Connectivity | 55PC0212-16-9CS2603 | 0 | |||
| 55PC0231-8-3/6/9CS2602 | TE Connectivity | 55PC0231-8-3/6/9CS2602 | 0 | |||
![]() NexGen Digital | MURS260T3G | onsemi | RoHS : Compliant | 17 | ||
| TKS2606CT-ND | TOKO Inc | 8 | ||||
![]() PEI Genesis | S3186F15S2-6.0-34-1.5 | SOURIAU-SUNBANK |
| 0 | ||
| S2900AS2608LNS034-000 | SOURIAU-SUNBANK |
| 0 | |||
| S3186FM77S2-6.0-34-2.0 | SOURIAU-SUNBANK |
| 0 | |||
| DPX3NE-A318-34S-2601-F0 | ITT Interconnect Solutions |
| 0 | |||
| DPX3NE-A318-34S-2601-FO | ITT Interconnect Solutions |
| 0 | |||
| S2900AS2607AIS034-000 | SOURIAU-SUNBANK |
| 0 | |||
| NRS-2-6000-5H | SOURIAU-SUNBANK |
| 0 | |||
| S4866S2608-34-1-3 | SOURIAU-SUNBANK |
| 0 | |||
| S2907S2606BIS034-000 | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | MTMM-102-04-T-S-260 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 1,419 | |
| MTLW-102-23-G-S-260 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 1,410 | ||
| MTLW-104-23-G-S-260 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 833 | ||
| MTSW-105-09-L-S-260-RA | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 626 | ||
| TW-04-09-T-S-260-095 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 498 | ||
| TW-05-09-T-S-260-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 422 | ||
| TW-07-07-T-S-260-245 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 303 | ||
| MTLW-114-07-G-S-260 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 290 | ||
| MTLW-120-07-G-S-260 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 290 | ||
| ZW-02-09-L-S-260-240 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 261 | ||
| MTMM-114-07-S-S-260 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 221 | ||
| DWM-05-01-T-S-260 | Samtec Inc | .050" x .100" Flex Stack, Flexible Micro RoHS : Compliant |
| 166 | ||
| DW-08-17-T-S-260 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 161 | ||
| TW-15-09-G-S-260-095 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 152 | ||
| TW-28-06-S-S-260-120 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 45 | ||
![]() Richardson RFPD | RTV-2016AF31O-S-26.000-TR | Raltron Electronics Corporation | Temperature Compensated Crystal Oscillator RoHS : Compliant | 0 | ||
| CCR-38S260 | Teledyne Relays | RF Switch 0MHz to 18GHz 60dB RoHS : Compliant |
| 0 | ||
| ATS260BSM-1E | CTS Corporation | Crystal 26MHz ±30ppm (Tol) ±50ppm (Stability) 18pF RoHS : Compliant |
| 0 | ||
| TS260MC | Spectrum Control | Conn SMA 0Hz to 26.5GHz 50Ohm ST M Gold RoHS : Compliant |
| 0 | ||
| RTX-2520DD31-S-26.000-TR | Raltron Electronics Corporation | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| RTX-2520DD33-S-26.000-TR | Raltron Electronics Corporation | OSC TCXO/VCTCXO RoHS : Compliant | 0 | |||
| TS260M | Spectrum Control | Conn SMA Terminator 0Hz to 26.5GHz 50Ohm ST M Gold RoHS : Compliant |
| 0 | ||
| TS260F | Spectrum Control | Terminations Sma, Up To 26.5 Ghz, 1Watt RoHS : Compliant |
| 0 | ||
| RTX-2520AD31-S-26.000-TR | Raltron Electronics Corporation | RTX-2520AD31-S-26.000-TR RoHS : Compliant | 0 | |||
| MURS260T3G | onsemi | Rectifier Diode Switching 600V 2A 75ns 2-Pin SMB T RoHS : Compliant | 0 | |||
![]() Rutronik | IAUS260N10S5N019TATMA1 | Infineon Technologies AG | N-CH 100V 260A 1,6mOhm TOLT RoHS : Compliant |
| 19 | |
![]() Chip 1 Exchange | LSS260-DO | OSRAM GmbH | INSTOCK RoHS : Not Compliant | 66,000 | ||
| LYS260-DO | INSTOCK | 50,774 | ||||
| LGS260DO | OSRAM GmbH | INSTOCK | 21,000 | |||
| LGS260DO | OSRAM GmbH | INSTOCK | 17,493 | |||
| LGS260DO | Siemens | INSTOCK | 10,433 | |||
| OSS260 | INSTOCK | 9,000 | ||||
| LY-S260-DO | OSRAM GmbH | INSTOCK | 3,000 | |||
| LGS260-D0 | OSRAM GmbH | INSTOCK | 3,000 | |||
| LYS260-D0 | OSRAM GmbH | INSTOCK | 2,985 | |||
| SN74S260NC | Texas Instruments | INSTOCK | 1,000 | |||
| MPZ1608S260ATDH5 | TDK Corporation | INSTOCK RoHS : Compliant | 911 | |||
| 74LS260 | Signetics | INSTOCK | 65 | |||
| PS2601 | INSTOCK | 49 | ||||
| DM54LS260J/883 | INSTOCK | 4 | ||||
| 54LS260DMQB | INSTOCK | 2 | ||||
![]() Avnet Abacus | MPZ1608S260ATDH5 | TDK Corporation | Ferrite Bead 0603 1608 Metric 26 ohm 6 A MPZ Series 0007 ohm 25 (Alt: MPZ1608S260ATDH5) RoHS : Compliant | 16,000 | ||
| B82725S2602N41 | TDK Corporation | (Alt: B82725S2602N041) RoHS : Compliant | 10,000 | |||
ABLS2-6.000MHZ-D4Y-T![]() | Abracon Corporation | Crystal Surface Mount 6 MHz SMD 114mm x 47mm 30 ppm 18 pF 30 ppm ABLS2 Series - Tape and Reel (Alt: ABLS2-6.000MHZ-D4Y-T) RoHS : Compliant | 3,000 | |||
| ECS-260-10-33B-CKM-TR | ECS International Inc | - Tape and Reel (Alt: ECS-260-10-33B-CKM-TR) RoHS : Compliant | 1,000 | |||
| 579S260ITT | CTS Corporation | - Tape and Reel (Alt: 579S260ITT) RoHS : Compliant | 0 | |||
| ATS260ASM-1E | CTS Corporation | - Tape and Reel (Alt: ATS260ASM-1E) RoHS : Compliant | 0 | |||
| DW-04-17-T-S-260 | Samtec Inc | Stacking Board Connector DW Series 4 Contacts Header 254 mm Through Hole 1 Rows (Alt: DW-04-17-T-S-260) RoHS : Compliant | 0 | |||
| ECS-260-18-30-GM-TR | ECS International Inc | Crystal 26MHz 18pF 2Pin SMD TR - Tape and Reel (Alt: ECS-260-18-30-GM-TR) RoHS : Compliant | 0 | |||
| MTLW-140-07-T-S-260 | Samtec Inc | Pin Header BoardtoBoard 254 mm 1 Rows 40 Contacts Through Hole MTLW Series (Alt: MTLW-140-07-T-S-260) RoHS : Compliant | 0 | |||
| MTMM-101-04-T-S-260 | Samtec Inc | Pin Header BoardtoBoard 1 Rows 1 Contacts Through Hole MTMM Series (Alt: MTMM-101-04-T-S-260) RoHS : Compliant | 0 | |||
| ECS-260-12-37-CKM-TR | ECS International Inc | Crystal Standard 26 MHz SMD 2mm x 16mm x 045mm 10 ppm 12 pF 10 ppm ECX1637 - Tape and Reel (Alt: ECS-260-12-37-CKM-TR) RoHS : Compliant | 0 | |||
| ECS-260-18-37-AGM-TR | ECS International Inc | Crystal Standard 26 MHz SMD 2mm x 16mm x 045mm 30 ppm 18 pF 25 ppm ECX1637 - Tape and Reel (Alt: ECS-260-18-37-AGM-TR) RoHS : Compliant | 0 | |||
| ABLS-26.000MHZ-K4F-T | Abracon Corporation | - Tape and Reel (Alt: ABLS-26.000MHZ-K4F-T) RoHS : Compliant | 0 | |||
ECS-260-10-37-RWM-TR![]() | ECS International Inc | Crystal Standard 26 MHz SMD 2mm x 16mm x 045mm 15 ppm 10 pF 15 ppm ECX1637 - Tape and Reel (Alt: ECS-260-10-37-RWM-TR) RoHS : Compliant | 0 | |||
| ECS-260-12-33Q-JES-TR | ECS International Inc | Crystal 26MHz 12pF 4Pin Miniature CSMD TR - Tape and Reel (Alt: ECS-260-12-33Q-JES-TR) RoHS : Compliant | 0 | |||
![]() Avnet Asia | MBRS260T3G | onsemi | (Alt: MBRS260T3G) RoHS : Compliant | 0 | ||
| MPZ1608S260ATDH5 | TDK Corporation | Ferrite Bead, 0603 [1608 Metric], 26 ohm, 6 A, MPZ Series, 0.007 ohm, ? 25% (Alt: MPZ1608S260ATDH5) RoHS : Compliant | 0 | |||
| TSSS2600 | Vishay Intertechnologies | (Alt: TSSS2600) RoHS : Compliant |
| 0 | ||
| PS26-057 | Sumida Corporation | (Alt: PS26-057) RoHS : Compliant | 0 | |||
| MPZ1608S260ATAH0 | TDK Corporation | (Alt: MPZ1608S260ATAH0) RoHS : Compliant | 0 | |||
ABLS2-6.000MHZ-D4Y-T![]() | Abracon Corporation | Crystal, Surface Mount, 6 MHz, SMD, 11.4mm x 4.7mm, 30 ppm, 18 pF, 30 ppm, ABLS2 Series (Alt: ABLS2-6.000MHZ-D4Y-T) RoHS : Compliant | 0 | |||
| NRVBS260NT3G | onsemi | (Alt: NRVBS260NT3G) RoHS : Compliant | 0 | |||
| MURS260T3G | onsemi | (Alt: MURS260T3G) RoHS : Compliant | 0 | |||
| ECS-260-8-30B-CKM | ECS International Inc | Crystal 26MHz 8pF 4-Pin Miniature SMD (Alt: ECS-260-8-30B-CKM) RoHS : Compliant | 0 | |||
| ECS-260-6-37B2-CKY-TR | ECS International Inc | (Alt: ECS-260-6-37B2-CKY-TR) RoHS : Compliant | 0 | |||
| PS26-068 | Sumida Corporation | (Alt: PS26-068) RoHS : Compliant | 0 | |||
![]() Avnet Silica | MURS260T3G | onsemi | Power Rectifier UltraFast Recovery 2 A 600 V (Alt: MURS260T3G) RoHS : Compliant | 130,000 | ||
| MBRS260T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: MBRS260T3G) RoHS : Compliant | 90,000 | |||
| DFLS260-7 | Diodes Incorporated | Schottky Rectifier 60 V 2 A Single PowerDI 123 2 Pins 620 mV (Alt: DFLS260-7) RoHS : Compliant | 54,000 | |||
| CS2600-CNR | Cirrus Logic | (Alt: CS2600-CNR) RoHS : Compliant | 0 | |||
| CS2600-DNR | Cirrus Logic | (Alt: CS2600-DNR) RoHS : Compliant | 0 | |||
| SL2S2602FTB | NXP Semiconductors | (Alt: SL2S2602FTB) RoHS : Compliant | 0 | |||
| NRVBS260NT3G | onsemi | Schottky Power Rectifier Surface Mount 20 A 60 V SMB Package (Alt: NRVBS260NT3G) RoHS : Compliant | 0 | |||
| MFS2601AMDA0AD | NXP Semiconductors | (Alt: MFS2601AMDA0AD) RoHS : Compliant | 0 | |||
| MFS2600AMDA0AD | NXP Semiconductors | (Alt: MFS2600AMDA0AD) RoHS : Compliant | 0 | |||
| MFS2601AMBA0AD | NXP Semiconductors | (Alt: MFS2601AMBA0AD) RoHS : Compliant | 0 | |||
| MFS2603AMBA0AD | NXP Semiconductors | System Basis Chip SPI 32 V to 36 V 48 Pins LQFPEP (Alt: MFS2603AMBA0AD) RoHS : Compliant | 0 | |||
| MFS2600AMDA0ADR2 | NXP Semiconductors | AUTO SBC (Alt: MFS2600AMDA0ADR2) RoHS : Compliant | 0 | |||
| MFS2603AMBA0ADR2 | NXP Semiconductors | (Alt: MFS2603AMBA0ADR2) RoHS : Compliant | 0 | |||
| MFS2602AMBA0ADR2 | NXP Semiconductors | AUTO SBC (Alt: MFS2602AMBA0ADR2) RoHS : Compliant | 0 | |||
| SIT1602BI-13-18S-26.000000 | SiTime Corporation | (Alt: SIT1602BI-13-18S-26.000000) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AMMLPEBVRS-26.0000T | Abracon Corporation |
| 0 | ||
| AMMLPDAXJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEAXCS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPFLBLCS-26.0000T | Abracon Corporation |
| 0 | |||
| ABLS-26.000MHZ-K4F-T | Abracon Corporation | CRYSTAL 26.0000MHZ 18PF SMD |
| 0 | ||
| AMMLPAALRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEALRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVBVRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPDAXCS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEAXJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPFLBLJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPAAVJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEAXRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPFLBLRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPDAVRS-26.0000T | Abracon Corporation |
| 0 | |||
![]() Chip-Germany GmbH | SS26-0B00-02 | Broadcom Limited | 10,000 | |||
![]() Component Electronics, Inc | ABLS2-6.000MHZ-D4Y-T![]() | Abracon Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 5,361 | |
| LYS260-DO | OSRAM GmbH | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2,760 | ||
| MURS260T3 | onsemi | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 150 | ||
| SN74S260J | Texas Instruments | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 119 | ||
| HW-02-08-TM-S-260-110 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant | 115 | |||
| MPZ1608S260ATAH0 | TDK Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 100 | ||
| 74S260N | Signetics | IN STOCK SHIP TODAY |
| 85 | ||
| SN74LS260N | Motorola Semiconductor Products | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 27 | ||
| AS-26.000-20-F-SMD | Raltron Electronics Corporation | IN STOCK SHIP TODAY | 10 | |||
| 74LS260PC | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
SN74S260N![]() | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 2 | ||
| 74S260N | Signetics | IN STOCK SHIP TODAY |
| 1 | ||
![]() DB Roberts | XL-JS260TT | Sugatsune Kogyo Co Ltd | 0 | |||
| OFBLTS2.6-05-PP | Essentra Components | 0 | ||||
| LCBS-2-6-01 | Essentra Components | CB SptDual LckNatural3/8 in Spc CB Spt Dual Lock Natural | 0 | |||
| DLCBS2-6-01 | Essentra Components | CB SptDual LckNatural3/8 in Spc CB Support Dual Lock Natural | 0 | |||
| TAS260A | Essentra Components | 1.25 IN SQUARE ALL METAL GLIDE | 0 | |||
![]() EBV Elektronik | TSSS2600 | Vishay Intertechnologies | (Alt: TSSS2600) RoHS : Compliant | 5,000 | ||
| MBRS260T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: MBRS260T3G) RoHS : Compliant | 2,500 | |||
| S2-60A6M | SIMCom | RF Components (Alt: S2-60A6M) RoHS : Compliant | 0 | |||
| S2-60BWC | SIMCom | CASING S260BWC (Alt: S2-60BWC) RoHS : Not Compliant | 0 | |||
| S2-60BW4 | SIMCom | CASING S260BW4 (Alt: S2-60BW4) RoHS : Not Compliant | 0 | |||
| SS26-0B00-02 | Broadcom Limited | (Alt: SS26-0B00-02) RoHS : Compliant | 0 | |||
| SS26-0A0P-01 | Broadcom Limited | PPEX89144A01DB (Alt: SS26-0A0P-01) RoHS : Not Compliant | 0 | |||
| SS26-0B0P-01 | Broadcom Limited | SS260B0P01 (Alt: SS26-0B0P-01) RoHS : Compliant | 0 | |||
| SNRVBS260T3G | onsemi | Rectifiers Schottky (Alt: SNRVBS260T3G) RoHS : Compliant | 0 | |||
| MFS2601AMDA0AD | NXP Semiconductors | (Alt: MFS2601AMDA0AD) RoHS : Compliant | 0 | |||
| MFS2600AMDA0AD | NXP Semiconductors | (Alt: MFS2600AMDA0AD) RoHS : Compliant | 0 | |||
| MURS260HE3_A/H | Vishay Intertechnologies | (Alt: MURS260HE3_A/H) RoHS : Compliant | 0 | |||
| MFS2600AMDA0ADR2 | NXP Semiconductors | AUTO SBC (Alt: MFS2600AMDA0ADR2) RoHS : Compliant | 0 | |||
| PFS2603HMBK9ADR2 | NXP Semiconductors | HLQFP48 eFS26 (Alt: PFS2603HMBK9ADR2) RoHS : Compliant | 0 | |||
| PEX89144B0-3 SS26-0B0P-03 | Broadcom Limited | PCI Express Bridges (Alt: PEX89144B0-3 SS26-0B0P-03) RoHS : Not Compliant | 0 | |||
![]() FDH Electronics | F2807S-26-050 | TEMP-FLEX, LLC | Multi-Cond Cbl |
| 300 | |
| SWBA032BRASS260 | LITTLE FALLS ALLOYS, INC. | Magnet Wire | 87 | |||
| 55PC0232-8-3/6/9CS2605 | TE Connectivity | Wire and Cable | 0 | |||
| 55PC0212-22-9CS2603 | TE Connectivity | Wire and Cable | 0 | |||
| 55PC0231-20-3/6/9CS2602 | TE Connectivity | Multi-Cond Cbl RoHS : Compliant | 0 | |||
| 55PC0232-12-3/6/9CS2605 | TE Connectivity | Wire and Cable | 0 | |||
| 55PC0211-22-9CS2600 | TE Connectivity | Wire and Cable |
| 0 | ||
![]() Flip Electronics | NTS260SFT1G | onsemi | Stock, Ship Today RoHS : Compliant |
| 1,231,645 | |
| A2T18S260-12SR3 | NXP Semiconductors | Stock RoHS : Compliant | 22,000 | |||
| MFS2603AMBA0AD | NXP Semiconductors | Stock RoHS : Compliant | 2,250 | |||
| MFS2603AMDA0AD | NXP Semiconductors | Stock | 500 | |||
![]() Maritex | FPV160808S260PKT | Fenghua (HK) Electronics Ltd | Varistor SMD; 0603; 26VDC; 25pF RoHS : Compliant |
| 3,860 | |
| MBRS260T3G | onsemi | Rectifier Diodes & Bridges; MBRS260T3G; ON SEMICONDUCTOR; 2; 2 A; 60 V; 200 �A RoHS : Compliant |
| 393 | ||
| TGS2603 | FIGARO Engineering Inc | MOS-type air pollutants gas sensor; range: 1-10ppm C2H5OH; supply: 5V; power: 240 mW |
| 42 | ||
| TGS2600 | FIGARO Engineering Inc | MOS-type air pollutants gas sensor; range: 1-30ppm H2; supply: 5V; power: 210mW |
| 36 | ||
| TGS2602 | FIGARO Engineering Inc | MOS-type air pollutants gas sensor; range: 1-30ppm C2H5OH; supply: 5V; power: 280mW |
| 34 | ||
![]() Master Electronics | S260 | Switchcraft Conxall | Conn Phone Plug M 3 POS Screw ST Cable Mount 3 Terminal 1 Port RoHS : Compliant |
| 401 | |
| MTLW-101-07-G-S-260 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-114-07-G-S-260 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-139-07-F-S-260 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-102-04-T-S-260 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-104-14-S-S-260 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MMSD-25-24C-S-26.00-S-K | Samtec Inc | MINI-MATE CABLE ASSEMBLY RoHS : Compliant |
| 0 | ||
| MTLW-104-23-G-S-260 | Samtec Inc | .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTLW-104-24-T-S-260 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-122-07-G-S-260 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-106-12-F-S-260 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-109-06-T-S-260 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-114-07-S-S-260 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-119-12-F-S-260 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-135-12-L-S-260 | Samtec Inc | RoHS : Compliant |
| 0 | ||
![]() Neutron USA | BI2-CRS260-ADZ30X2-B3131/S34 | TURCK Inc | Proximity Sensor,Inductive Cylinder Position,Insertion Type,2mm Range |
| 4 | |
| M2SS2-60B01 | ABB Low Voltage Products and Systems | 2POS KNOB A-C BLK CMR 1NC MAIN |
| 3 | ||
| SM312FPMHS, 26071 | Banner Engineering Corp | Banner Engineering SM312FPMHS Mini-Beam, High Speed Plastic Fiber Optic, Range, MINI-BEAM Series |
| 2 | ||
| CCP2S-2-60CF | Eaton Bussmann | Compact Circuit Protector;2 Pole;W/Side Mount Mechanism Right Side;CUBEForce;60A |
| 2 | ||
| B82725S2602N041 | TDK Corporation | Common Mode Chokes / Filters RING CORE CHOKE 2x7.8mH 6.0A RoHS : Compliant |
| 0 | ||
| MJS2-60B | ABB Low Voltage Products and Systems | Joystick 2-pos, Mom, w/o latching, Black, Non-illum, Chrome Metal, No contact block, 1SFA611702R6006 |
| 0 | ||
| M2SS2-60B20 | ABB Low Voltage Products and Systems | 2POS KNOB A-C BLK CMR 2NO |
| 0 | ||
| M3SS2-60B20 | ABB Low Voltage Products and Systems | 3POS SW MOM BLK KNOB 2-NO |
| 0 | ||
| M2SS2-60B11 | ABB Low Voltage Products and Systems | 2POS KNOB; A&C; BLK; 1N0-1NC |
| 0 | ||
| BI2-CRS260-AP4X2-H1141/S34 | TURCK Inc | Inductive Prox Sensor, R/A 12.7mm Smooth Barrel, R: 2mm flush, 3wire DC PNP NO, M12 Conn, 4570890 |
| 0 | ||
| M2SS2-60B02 | ABB Low Voltage Products and Systems | 2POS KNOB A-C BLK CMR 2NC |
| 0 | ||
![]() Pasternack Enterprises US | PE3C2346/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240 Coax With Times Microwave Components with Double HeatShrink., Radio frequency assembly N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2346/HS2-60 can also be known as a low loss N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C2346/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2346/HS2-60 can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink. |
| 3,624 | |
| PE3C0053/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low Loss Cable 60 Inch Length Using LMR-240 Coax with Double Heatshrink., Radio frequency assembly N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C0053/HS2-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3C0053/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink. |
| 1,685 | ||
| PE3C1135/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with Times Microwave Components with Double HeatShrink., Radio frequency assembly TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1135/HS2-60 can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C1135/HS2-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohms impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable 60 inch length using LMR-240-UF coax with Times Microwave components with double heatshrink. |
| 1,240 | ||
| PE3W01371/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to SMA Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240 Coax with Double HeatShrink., Radio frequency assembly N male to SMA male right angle low loss cable 60 inch length using LMR-240 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to SMA male right angle low loss cable 60 inch length using LMR-240 coax with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle SMA cable connection on the other. Our low loss N type to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W01371/HS2-60 can also be known as a low loss type N plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. N type plug to SMA plug cable assembly PE3W01371/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01371/HS2-60 can also be used in the other direction and will be right angle SMA male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to SMA male right angle low loss cable 60 inch length using LMR-240 coax with double heatshrink. |
| 988 | ||
| PE3C6335/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male Right Angle to UHF Female Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly N male right angle to UHF female low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to UHF female low loss cable 60 inch length using LMR-195 coax with double heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and UHF cable connection on the other. Our low loss right angle type N to UHF cable assemblies have a male gender on end 1 and female on end 2. PE3C6335/HS2-60 can also be known as a low loss right angle N type plug to UHF jack cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF jack cable assembly PE3C6335/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency type N right angle male to UHF female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6335/HS2-60 can also be used in the other direction and will be UHF female to right angle type N male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to UHF jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to UHF female low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 254 | ||
| PE3C6334/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male Right Angle to UHF Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and UHF cable connection on the other. Our low loss right angle type N to UHF cable assemblies have a male gender on end 1 and male on end 2. PE3C6334/HS2-60 can also be known as a low loss right angle N type plug to UHF plug cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF plug cable assembly PE3C6334/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency N type right angle male to UHF male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6334/HS2-60 can also be used in the other direction and will be UHF male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to UHF plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to UHF male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 254 | ||
| PE3C0108/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to N Female Bulkhead Cable 12 Inch Length Using LMR-240 Coax with Double HeatShrink., Radio frequency assembly TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and N type bulkhead cable connection on the other. Our TNC to type N cable assemblies have a male gender on end 1 and female on end 2. This TNC to type N cable is a male to female coax assembly, PE3C0108/HS2-60, can also be known as a TNC plug to type N jack cable assembly and will be shipped same-day as it is purchased. TNC plug to N type jack cable assembly PE3C0108/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0108/HS2-60 can also be used in the other direction and will be type N female bulkhead to TNC male cable assembly if the opposite connectivity is required. TNC plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink. |
| 240 | ||
| PE3W06854/HS2-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 60 inches. QN Male to Reverse Polarity SMA Female Bulkhead Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable 60 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854/HS2-60, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854/HS2-60 can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable 60 inch length using LMR-195 coax with double heatshrink. |
| 114 | ||
| PE3C2368/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male RA to TNC Male RA Low Loss Cable 60 Inch Length Using LMR-400-DB Coax With Times Microwave Components with Double HeatShrink., Radio frequency assembly TNC male RA to TNC male RA low loss cable 60 inch length using LMR-400-DB coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male RA to TNC male RA low loss cable 60 inch length using LMR-400-DB coax with Times Microwave components with double heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2368/HS2-60 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C2368/HS2-60 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male RA to TNC male RA low loss cable 60 inch length using LMR-400-DB coax with Times Microwave components with double heatshrink. |
| 8 | ||
| PE3C1041/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Right Angle Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Double HeatShrink., Radio frequency assembly N male to TNC male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle TNC cable connection on the other. Our low loss type N to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1041/HS2-60 can also be known as a low loss type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3C1041/HS2-60 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1041/HS2-60 can also be used in the other direction and will be right angle TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink. |
| 0 | ||
| PE3C6004/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to TNC Male Right Angle Low Loss Cable 60 Inch Length Using LMR-200 Coax with Double HeatShrink., Radio frequency assembly SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-200 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-200 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C6004/HS2-60 can also be known as a low loss right angle SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3C6004/HS2-60 is built with LMR-200 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6004/HS2-60 can also be used in the other direction and will be right angle TNC male to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to TNC male right angle low loss cable 60 inch length using LMR-200 coax with double heatshrink. |
| 0 | ||
| PE3W00013/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components with Double HeatShrink., Radio frequency assembly N male to TNC male low loss cable 60 inch length using LMR-400 coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 60 inch length using LMR-400 coax with Times Microwave components with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W00013/HS2-60 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3W00013/HS2-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00013/HS2-60 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 60 inch length using LMR-400 coax with Times Microwave components with double heatshrink. |
| 0 | ||
| PE3C0051/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to BNC Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our low loss SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C0051/HS2-60 can also be known as a low loss SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C0051/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0051/HS2-60 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 0 | ||
| PE345/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Right Angle Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Double HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our low loss type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE345/HS2-60 can also be known as a low loss type N plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE345/HS2-60 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE345/HS2-60 can also be used in the other direction and will be right angle N type male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink. |
| 0 | ||
| PE3C1609/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMB Plug to SMA Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMB cable connection on one end and SMA cable connection on the other. Our low loss SMB to SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3C1609/HS2-60 can also be known as a low loss SMB male to SMA plug cable assembly and will be shipped same-day as it is purchased. SMB male to SMA plug cable assembly PE3C1609/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1609/HS2-60 can also be used in the other direction and will be SMA male to SMB plug cable assembly if the opposite connectivity is required. Low loss SMB male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 0 | ||
![]() Teledyne HiRel | DM54LS260J/883 | Teledyne HiRel | NOR GATE, DUAL 5-INPUT | 0 | ||
| DM54LS260E/883 | Teledyne HiRel | NOR GATE, DUAL 5-INPUT | 0 | |||
![]() Vyrian | LM3S2601-IBZ50-A2T![]() | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, 50MHz, CMOS, PBGA108 RoHS : Compliant | 9,645 | ||
| SS26-0B0P-01 | Broadcom Limited | 9,541 | ||||
T74LS260B1![]() | STMicroelectronics | RoHS : Not Compliant | 9,033 | |||
| SN74S260N1 | Texas Instruments | NOR Gate, TTL, PDIP14 RoHS : Not Compliant | 8,653 | |||
| A9PS26-0012 | OMRON Corporation | Pushbutton Switch, DPDT, Off-(on), Momentary, 0.1A, 28VDC, Solder Terminal, Through Hole-right Angle RoHS : Compliant | 8,027 | |||
| SS26-0B00-02 | Broadcom Limited | 7,453 | ||||
| SS26-0A0P-01 | Broadcom Limited | 6,889 | ||||
SN74S260N3![]() | Texas Instruments | NOR Gate, S Series, 2-Func, 5-Input, TTL, PDIP14 RoHS : Not Compliant | 5,508 | |||
LM3S2608-IQC50-A2T![]() | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M3 CPU, 50MHz, CMOS, PQFP100 RoHS : Compliant | 5,354 | |||
| UES2606 | Microchip Technology Inc | Rectifier Diode, 1 Phase, 2 Element, 30A, 400V V(RRM), Silicon, TO-3 RoHS : Not Compliant | 4,999 | |||
| TMS2603JC | Texas Instruments | Arithmetic Circuit, MOS, CDIP24 RoHS : Not Compliant | 4,570 | |||
| TMS2604NC | Texas Instruments | Arithmetic Circuit, MOS, PDIP24 RoHS : Not Compliant | 4,112 | |||
SN54S260J![]() | Texas Instruments | NOR Gate, S Series, 2-Func, 5-Input, TTL, CDIP14 RoHS : Not Compliant | 3,812 | |||
LM3S2601-EQC50-A2![]() | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, 50MHz, CMOS, PQFP100 RoHS : Compliant | 3,448 | |||
| TMS2602NC | Texas Instruments | Arithmetic Circuit, MOS, PDIP24 RoHS : Not Compliant | 3,158 | |||
![]() Win Source Electronics | NRVTS260ESFT | onsemi | Schottky Barrier Diode 60V 2A SOD-123FL |
| 319,400 | |
| DFLS260-7 | Diodes Incorporated | DIODE SCHOTTKY 60V 2A POWERDI123 RoHS : Compliant |
| 300,000 | ||
| NRVTS260ESFT1G | onsemi | DIODE SCHOTTKY 60V 2A SOD123FL RoHS : Compliant |
| 246,000 | ||
| MPZ1608S260ATAH0 | TDK Corporation | FERRITE BEAD 26 OHM 0603 1LN RoHS : Compliant |
| 204,000 | ||
| MURS260T3 | onsemi | DIODE GEN PURP 600V 2A SMB RoHS : Not Compliant |
| 171,750 | ||
| NRVTS260ESFT1 | onsemi | Schottky Diode 60V 2A SOD-123FL |
| 150,000 | ||
| NRVTS260ESF | onsemi | Schottky Barrier Diode 60V 2A SOD-123FL |
| 149,745 | ||
| NRVTS260ESFT3G | onsemi | DIODE SCHOTTKY 60V 2A SOD123FL RoHS : Compliant |
| 140,000 | ||
| DFLS260Q-7 | Diodes Incorporated | DIODE SCHOTTKY 60V 2A POWERDI123 RoHS : Compliant |
| 100,000 | ||
| MURS260T3G | onsemi | DIODE GEN PURP 600V 2A SMB / Rectifier Diode Switching 600V 2A 75ns 2-Pin SMB T/R RoHS : Compliant |
| 80,000 | ||
| MBRS260T3 | onsemi | Surface Mount Schottky Power Rectifier | DIODE SCHOTTKY 60V 2A SMB RoHS : Not Compliant |
| 35,000 | ||
| MBRS260T3G | onsemi | DIODE SCHOTTKY 60V 2A SMB RoHS : Compliant |
| 32,880 | ||
| NTS260SFT1G | onsemi | DIODE SCHOTTKY 60V 2A SOD123FL RoHS : Compliant |
| 23,900 | ||
| NTS260SFT1 | onsemi | Schottky Rectifier 60V 2A SOD-123FL |
| 23,900 | ||
| TGS2600 | FIGARO Engineering Inc |
| 5,850 | |||
![]() Wuhan P&S | MBRS260T3G | onsemi | Surface Mount Schottky Barrier Power Rectifier RoHS : Compliant |
| 105,000 |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |