S50-R10K Price, Reseller, Stock

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. TNC Female Bulkhead to TNC Male Right Angle Cable 50 cm Length Using PE-P195 Coax with HeatShrink., Radio frequency assembly TNC female bulkhead to TNC male right angle cable 50 cm length using PE-P195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC female bulkhead to TNC male right angle cable 50 cm length using PE-P195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and right angle TNC cable connection on the other. Our TNC to right angle TNC cable assemblies have a female gender on end 1 and male on end 2. This TNC to TNC cable is a female to male coax assembly, PE3W04559/HS-50CM, can also be known as a TNC jack to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC jack to TNC plug cable assembly PE3W04559/HS-50CM is built with PE-P195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 3 GHz maximum frequency TNC female bulkhead to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W04559/HS-50CM can also be used in the other direction and will be right angle TNC male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to TNC male right angle cable 50 cm length using PE-P195 coax with heatshrink.

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

1,863

PE3W06128/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. TNC Male Right Angle to N Female Cable 50 cm Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly TNC male right angle to N female cable 50 cm length using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male right angle to N female cable 50 cm length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle TNC cable connection on one end and N type cable connection on the other. Our right angle TNC to type N cable assemblies have a male gender on end 1 and female on end 2. This TNC to type N cable is a male to female coax assembly, PE3W06128/HS-50CM, can also be known as a right angle TNC plug to N type jack cable assembly and will be shipped same-day as it is purchased. TNC plug to type N jack cable assembly PE3W06128/HS-50CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency TNC right angle male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06128/HS-50CM can also be used in the other direction and will be N type female to right angle TNC male cable assembly if the opposite connectivity is required. TNC right angle plug to N type jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to N female cable 50 cm length using LMR-195 coax with heatshrink.

1 : $89.89
25 : $85.4
50 : $80.9
100 : $77.31

1,484

PE3W02743/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. N Male to BNC Male Cable 50 cm Length Using LMR-195 Coax with HeatShrink., Radio frequency assembly N male to BNC male cable 50 cm length using LMR-195 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to BNC male cable 50 cm length using LMR-195 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and BNC cable connection on the other. Our N type to BNC cable assemblies have a male gender on end 1 and male on end 2. This N type to BNC cable is a male to male coax assembly, PE3W02743/HS-50CM, can also be known as a type N plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to BNC plug cable assembly PE3W02743/HS-50CM is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency N type male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02743/HS-50CM can also be used in the other direction and will be BNC male to type N male cable assembly if the opposite connectivity is required. N type plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to BNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to BNC male cable 50 cm length using LMR-195 coax with heatshrink.

1 : $77.09
25 : $73.24
50 : $69.38
100 : $66.3

915

PE3W01093/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. SMA Male Right Angle to Reverse Polarity SMA Male Cable 50 cm Length Using LMR-240 Coax with HeatShrink., Radio frequency assembly SMA male right angle to reverse polarity SMA male cable 50 cm length using LMR-240 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to reverse polarity SMA male cable 50 cm length using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and reverse polarity SMA cable connection on the other. Our right angle SMA to reverse polarity SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to reverse polarity SMA cable is a male to male coax assembly, PE3W01093/HS-50CM, can also be known as a right angle SMA plug to reverse polarity SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to reverse polarity SMA plug cable assembly PE3W01093/HS-50CM is built with LMR-240 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to reverse polarity SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01093/HS-50CM can also be used in the other direction and will be reverse polarity SMA male to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA reverse polarity plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to reverse polarity SMA male cable 50 cm length using LMR-240 coax with heatshrink.

1 : $121.99
25 : $115.89
50 : $109.79
100 : $104.91

575

PE3C1704/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. TNC Male to SMA Male Cable 50 cm Length Using LMR-400-UF Coax with HeatShrink., Radio frequency assembly TNC male to SMA male cable 50 cm length using LMR-400-UF coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to SMA male cable 50 cm length using LMR-400-UF coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and SMA cable connection on the other. Our TNC to SMA cable assemblies have a male gender on end 1 and male on end 2. This TNC to SMA cable is a male to male coax assembly, PE3C1704/HS-50CM, can also be known as a TNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C1704/HS-50CM is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1704/HS-50CM can also be used in the other direction and will be SMA male to TNC male cable assembly if the opposite connectivity is required. TNC plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to SMA male cable 50 cm length using LMR-400-UF coax with heatshrink.

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

303

PE3W05697/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178B/U, RF Cable Type: RG178, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. SMA Female Bulkhead to SMP Female Right Angle Cable 50 cm Length Using RG178 Coax with HeatShrink., Radio frequency assembly SMA female bulkhead to SMP female right angle cable 50 cm length using RG178 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMP female right angle cable 50 cm length using RG178 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and right angle SMP cable connection on the other. Our SMA to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMP cable is a female to female coax assembly, PE3W05697/HS-50CM, can also be known as a SMA jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMP jack cable assembly PE3W05697/HS-50CM is built with RG178 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA female bulkhead to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05697/HS-50CM can also be used in the other direction and will be right angle SMP female to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMP female right angle cable 50 cm length using RG178 coax with heatshrink.

1 : $94.19
25 : $89.48
50 : $84.77
100 : $81.0

293

PE3C5568/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: MMBX, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. SMA Female to Snap-On MMBX Plug Cable 50 CM Length Using PE-SR405FLJ Coax., Radio frequency assembly SMA female to snap-on MMBX plug cable 50 cm length using PE-SR405FLJ coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female to snap-on MMBX plug cable 50 cm length using PE-SR405FLJ coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMBX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and MMBX cable connection on the other. Our SMA to MMBX cable assemblies have a female gender on end 1 and plug on end 2. This SMA to MMBX cable is a female to plug coax assembly, PE3C5568/HS-50CM, can also be known as a SMA jack to MMBX male cable assembly and will be shipped same-day as it is purchased. SMA jack to MMBX male cable assembly PE3C5568/HS-50CM is built with PE-SR405FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to MMBX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 12.5 GHz maximum frequency SMA female to MMBX plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C5568/HS-50CM can also be used in the other direction and will be MMBX plug to SMA female cable assembly if the opposite connectivity is required. SMA jack to MMBX male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMBX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to snap-on MMBX plug cable 50 cm length using PE-SR405FLJ coax.

1 : $126.99
25 : $120.64
50 : $114.29
100 : $109.21

PE3W00088/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C600, RF Cable Type: PE-C600, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. TNC Male to TNC Male Low Loss Cable 50 CM Length Using PE-C600 Coax., Radio frequency assembly TNC male to TNC male low loss cable 50 cm length using PE-C600 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. TNC male to TNC male low loss cable 50 cm length using PE-C600 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with TNC cable connection on one end and TNC cable connection on the other. Our low loss TNC to TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE3W00088/HS-50CM, can also be known as a low loss TNC plug to TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W00088/HS-50CM is built with PE-C600 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male low loss cable 50 cm length using PE-C600 coax.

1 : $175.99
25 : $167.19
50 : $158.39
100 : $151.35

PE3W06759/HS-50CM

Pasternack Enterprises

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

PE71S5010

Pasternack Enterprises

Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Reflective, Minimum Frequency: 300 MHz, Maximum Frequency: 3.5 GHz, Impedance: 50 Ohm, Maximum Input VSWR: 1.8:1, Maximum Insertion Loss: 1.2 dB, Minimum Isolation: 25 dB. Reflective SPDT PIN Diode Switch Operating From 30 MHz to 3.5 GHz Up to 100 Watt (+50 dBm) and Field Replaceable SMA with Heatsink. The PE71S5010 PIN diode switch from Pasternack has a reflective design with a SPDT switch configuration. Our RF reflective PIN diode switch uses SMA connectors at 50 Ohm impedance. This SMA PIN diode reflective switch has a minimum frequency of 300 MHz and a maximum frequency of 3.5 GHz. Make your online purchase right now to take advantage of our same-business-day shipping. This reflective SPDT radio frequency PIN diode switch has a female gender configuration and is designed to withstand a series of environmental test conditions including altitude, vibration, shock and humidity. Our PE71S5010 PIN diode switch has a gold-plated aluminum body. This PIN diode switch is rated at a 5 Vdc voltage. Our ultra-wideband RF PIN diode switch operates within a temperature range of -40 deg C to 85 deg C. This 50 Ohm SPDT PIN diode switch has a 1.8:1 maximum VSWR (Voltage Standing Wave Ratio). The maximum insertion loss of this SMA reflective switch is 1.2 dB with a minimum isolation of 25 dB. Additional specifications for this ultra-wideband SPDT PIN diode switch can be found on its PDF specification datasheet and CAD drawings. The reflective PIN diode radio frequency switch PE71S5010 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our reflective SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect ultra-wideband RF PIN diode switch for your requirement.

1 : $10,800.0
5 : $10,368.0
10 : $9,936.0
25 : $9,504.0

PE71S5023

Pasternack Enterprises

Key Specifications.. USB Ethernet Controlled High Isolation SP4T Absoptive Switch 500 MHz to 50 GHz, 2.4mm. The Pasternack’s PE71S5023 is a high isolation USB Controlled SP4T Switch. Our SP4T USB switch uses 2.4mm to 2.4mm connectors at 50 Ohm impedance. This 2.4mm high isolation USB SP4T switch has a minimum frequency of 500 MHz and a maximum frequency of 50 GHz. Make your online purchase right now to take advantage of our same-business-day shipping. This SP4T USB switch has a female to female gender configuration and is designed to withstand a series of environmental test conditions including altitude, vibration, shock and humidity. Our PE71S5023 high isolation USB switch has a nickel-plated female body. Our SP4T USB switch operates within a temperature range of -40 deg C to 85 deg C. This 50 Ohm USB Controlled switch has a 3:1 maximum VSWR (Voltage Standing Wave Ratio). The Maximum insertion loss of this 2.4mm SP4T switch is 7 dB with a minimum isolation of 40 dB. Our PE71S5023 SP4T USB Controlled switch is a great option for test & measurement, 5G communication, military electronic systems, wireless infrastructure, fiber optics and research & development applications. Additional specifications for this high isolation SP4T switch can be found on its PDF specification datasheet and CAD drawings. The SP4T USB switch PE71S5023 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our SP4T 2.4mm high isolation USB switch can ship worldwide the same day that it is bought as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect high isolation USB Controlled switch for your requirement.

1 : $20,900.0
5 : $20,064.0
10 : $19,228.0
25 : $18,392.0

PE3C7350/HS-50CM

Pasternack Enterprises

1 : $109.99
25 : $104.49
50 : $98.99
100 : $94.59

PE3W02270/HS-50CM

Pasternack Enterprises

1 : $68.49
25 : $65.07
50 : $61.64
100 : $58.9

PE3W03073/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length: 19.69 inches. N Male to TNC Male Right Angle Cable 50 CM Length Using LMR-400 Coax with HeatShrink., Radio frequency assembly N male to TNC male right angle cable 50 cm length using LMR-400 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. N male to TNC male right angle cable 50 cm length using LMR-400 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle TNC cable connection on the other. Our low loss N type to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This N type to TNC cable is a male to male coax assembly, PE3W03073/HS-50CM, can also be known as a low loss type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3W03073/HS-50CM is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03073/HS-50CM can also be used in the other direction and will be right angle TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male right angle cable 50 cm length using LMR-400 coax with heatshrink.

1 : $130.99
25 : $124.44
50 : $117.89
100 : $112.65

PE3W06872LF/HS-50CM

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 19.68 inches. N Male to QN Male Right Angle Cable 50 cm Length Using RG223 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to QN male right angle cable 50 cm length using RG223 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male to QN male right angle cable 50 cm length using RG223 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to QN cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with type N cable connection on one end and right angle QN cable connection on the other. Our type N to right angle QN cable assemblies have a male gender on end 1 and male on end 2. This type N to QN cable is a male to male coax assembly, PE3W06872LF/HS-50CM, can also be known as a type N plug to right angle QN plug cable assembly and will be shipped same-day as it is purchased. N type plug to QN plug cable assembly PE3W06872LF/HS-50CM is built with RG223 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle QN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency type N male to QN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06872LF/HS-50CM can also be used in the other direction and will be right angle QN male to type N male cable assembly if the opposite connectivity is required. Type N plug to QN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to QN cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to QN male right angle cable 50 cm length using RG223 coax with heatshrink, LF solder.

1 : $158.99
25 : $151.04
50 : $143.09
100 : $136.73

Venkel Ltd.

C1210X7S500-106MNE

VENKEL LTD

Chip Capacitor;1210;X7S;50V;10uF;�20%
RoHS : Compliant

22,000

C1210X7S500-106KNE

VENKEL LTD

Chip Capacitor;1210;X7S;50V;10uF;�10%
RoHS : Compliant

22,000

C2220X7S500-156KNE

VENKEL LTD

Chip Capacitor;2220;X7S;50V;15uF;�10%
RoHS : Compliant

C0805X6S500-475KNE

VENKEL LTD

Chip Capacitor;0805;X6S;50V;4.7uF;�10%
RoHS : Compliant

AGC1206X7S500-106KNE

VENKEL LTD

Auto Grade Capacitor;1206;X7S;50V;10uF;�10%
RoHS : Compliant

Vyrian

CGS503U025V5L

Cornell Dubilier Electronics

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 25V, 75% +Tol, 10% -Tol, 50000uF, Chassis Mount

16,396

VS-50WQ06FNTRRHM3

Vishay Intertechnologies

Rectifier Diode, Schottky, 1 Phase, 1 Element, 5.5A, 60V V(RRM), Silicon, TO-252AA
RoHS : Compliant

12,598

HS50050RJ

Ohmite Manufacturing

Fixed Resistor, Wire Wound, 500W, 50ohm, 2300V, 5% +/-Tol, 100ppm/Cel, Chassis Mount

11,115

LM2990S-5-0

Texas Instruments

9,405

VS-50WQ06FNTRPBF

Vishay Intertechnologies

Rectifier Diode, Schottky, 1 Phase, 1 Element, 5.5A, 60V V(RRM), Silicon
RoHS : Compliant

9,043

QCPL-CA4S-50RE

Broadcom Limited

8,811

CDCS503TPWRQ1

Texas Instruments

PLL Based Clock Driver, CDC Series, 1 True Output(s), 0 Inverted Output(s), PDSO8
RoHS : Compliant

6,775

LM3478MMX-S5000472

Texas Instruments

4,818

XC3S5000-5VQ100C

AMD Xilinx

Field Programmable Gate Array, 192 CLBs, 50000 Gates, 74880-Cell, CMOS, PQFP900
RoHS : Compliant

3,847

LD1117AS50TR

STMicroelectronics

RoHS : Compliant

3,444

XC3S5000-5FG1156I

AMD Xilinx

Field Programmable Gate Array, 74880-Cell, CMOS, PBGA1156
RoHS : Not Compliant

2,933

XC3S5000-4PQ208C

AMD Xilinx

Field Programmable Gate Array, 192 CLBs, 50000 Gates, PQFP208
RoHS : Compliant

2,810

XC3S50-4FGG900C

AMD Xilinx

Field Programmable Gate Array, 192 CLBs, 50000 Gates, PBGA900
RoHS : Compliant

2,553

XC3S50AN-5FT256C

AMD Xilinx

Field Programmable Gate Array, 176 CLBs, 50000 Gates, 770MHz, 1584-Cell, CMOS, PBGA256
RoHS : Not Compliant

2,200

XS2S50-5-FG256I

AMD Xilinx

Field Programmable Gate Array, 1728-Cell, CMOS, PBGA256
RoHS : Not Compliant

1,519

Waytek, Inc.

DSWS50HSK2

HellermannTyton

HellermannTyton DSWS50HSK2 dual swivel saddle mount is a wire-management mount designed to route and secure bundles with flexible positioning. Its dual-swivel saddle design supports cleaner harness alignment, controlled routing, and stable retention in vehicle and equipment applications.

4 : $5.568
10 : $5.0547
50 : $4.6399
100 : $4.4228
200 : $4.3043
500 : $4.0674

5,791

FMS-50

Eaton Electronics

Bussmann FMS Series Slotted Cartridge Fuse 50A 32VDC

5 : $4.3983
10 : $4.0684
50 : $3.8457
100 : $3.6039
200 : $3.3851
500 : $3.2469

105

S500-A6

Trombetta

Electronic Control Module 12/24V

1 : $78.35
5 : $73.74
10 : $71.65
50 : $68.3
100 : $64.94

S500-A60

Trombetta

Electronic Control Module 12/24V

1 : $90.68
5 : $84.63
10 : $79.52
25 : $75.79
50 : $72.54

CSS-50R

Thomas & Betts

Thomas & Betts Deltec CSS-50R strap-on-reel cable ties are continuous-use fastening ties supplied on a reel for high-volume bundling work. Their reel-fed format supports fast dispensing, efficient installation, and flexible cut-to-length fastening in harness and packaging applications.

1 : $91.42
5 : $88.0
10 : $85.14
50 : $80.57
100 : $77.71

Win Source Electronics

LDL1117S50R

STMicroelectronics

IC REG LINEAR 5V 1.2A SOT223
RoHS : Compliant

2,015 : $0.1491
1,615 : $0.1552
1,240 : $0.1613
870 : $0.1734
560 : $0.1794
265 : $0.1916

66,510

LM2576HVS-5.0/NOPB

Texas Instruments

IC REG BUCK 5V 3A TO263-5
RoHS : Compliant

186 : $1.615
149 : $1.6807
115 : $1.7463
80 : $1.8776
52 : $1.9433
25 : $2.0746

64,200

BTS5020-2EKA

Infineon Technologies AG

IC PWR SW HI-SIDE 2CH DSO14-40
RoHS : Compliant

136 : $2.2196
109 : $2.3098
84 : $2.4
59 : $2.5805
38 : $2.6707
18 : $2.8512

13,126

CDCS503TPWRQ1

Texas Instruments

IC CLK BUFFER 1:1 108MHZ 8TSSOP
RoHS : Compliant

198 : $1.5159
148 : $1.6908
115 : $1.7491
83 : $1.8074
54 : $1.8657
22 : $2.2739

10,000

SF-0603S500-2

Bourns Inc

RoHS : Compliant

2,265 : $0.1327
1,690 : $0.1481
1,310 : $0.1532
950 : $0.1583
615 : $0.1634
255 : $0.1991

10,000

LM2595S-5.0/NOPB

Texas Instruments

IC REG BUCK 5V 1A TO263-5
RoHS : Compliant

61 : $4.9243
46 : $5.4925
36 : $5.6819
26 : $5.8713
17 : $6.0607
7 : $7.3864

9,530

AS5047P-ATSM

Amphenol Spectra-Strip

ROTARY ENCODER MAGNETIC PROG / 14-bit On-Axis Magnetic Rotary Position Sensor with 12-Bit Decimal

81 : $3.7273
65 : $3.8788
50 : $4.0304
35 : $4.3334
23 : $4.4849
11 : $4.7879

9,350

LM2592HVS-5.0

Texas Instruments

LM2592HV SIMPLE SWITCHER Power Converter 150 kHz 2A Step-Down Voltage | IC REG BUCK 5V 2A TO263-5
RoHS : Not Compliant

72 : $4.6995
54 : $5.2418
42 : $5.4226
30 : $5.6032
20 : $5.784
8 : $7.0493

7,508

NCV4276CDS50R4G

onsemi

IC REG LINEAR 5V 400MA D2PAK-5
RoHS : Compliant

170 : $1.7728
127 : $1.9773
98 : $2.0455
71 : $2.1137
46 : $2.1819
19 : $2.6591

7,200

ZLLS500TA

Diodes Incorporated

DIODE SCHOTTKY 40V 700MA SOT23-3
RoHS : Compliant

1,645 : $0.1824
1,230 : $0.2035
955 : $0.2105
690 : $0.2175
450 : $0.2245
185 : $0.2736

4,103

BTS50080-1TMA

Infineon Technologies AG

IC SWITCH PWR HISIDE TO220-7
RoHS : Compliant

82 : $4.1432
65 : $4.3117
50 : $4.48
35 : $4.8169
23 : $4.9853
11 : $5.3221

3,000

PSS50S71F6

Powerex Power Semiconductors

MOD IPM 6-PAC 50A 600V DIP

14 : $24.96
11 : $27.84
8 : $28.8
6 : $29.76
4 : $30.72
2 : $37.4399

1,307

LM2940CS-5.0/NOPB

Texas Instruments

IC REG LDO 5V 1A DDPAK
RoHS : Compliant

102 : $2.9546
76 : $3.2955
59 : $3.4091
43 : $3.5228
28 : $3.6364
12 : $4.4319

420

NRS5024T2R2NMGJ

TAIYO YUDEN

SMD POWER INDUCTORS(NR SERIES/NR SERIES H TYPE/S TYPE/V TYPE)
RoHS : Compliant

1,905 : $0.1576
1,425 : $0.1758
1,100 : $0.1819
800 : $0.1879
520 : $0.194
215 : $0.2364

400

BTS500801TEAAUMA1

Infineon Technologies AG

IC PWR SWITCH N-CHAN 1:1 TO252-5 / Power Switch/Driver 1:1 N-Channel 10A PG-TO252-5-11
RoHS : Compliant

64 : $4.7273
48 : $5.2728
37 : $5.4546
27 : $5.6364
18 : $5.8182
8 : $7.091

214

Wuhan P&S

NCV8775CDS50R4G

onsemi

-
RoHS : Compliant

1 : $2.34
100 : $1.5
500 : $1.24
1,000 : $1.14

25,600

LDL1117S50R

STMicroelectronics

1.2 A high PSRR low dropout linear regulator
RoHS : Compliant

1 : $0.2963
100 : $0.237
500 : $0.1777
1,000 : $0.1185

10,000

LD1117S50TR

STMicroelectronics

5V Fixed Positive Voltage LDO Regulator
RoHS : Compliant

1 : $0.51
100 : $0.41
500 : $0.31
1,000 : $0.21

5,000

S50-R10K Reseller

Enlace URL