CP10.121, CP10.122

CP-Series

This bracket is used to mount the devices on a wall/panel without utilizing a DIN-Rail. The bracket can be mounted

without detaching the DIN-rail brackets.

Fig. 24-1 Isometric view

Fig. 24-2 Isometric view

Fig. 24-3 Isometric view

21/28

Fig. 24-4 Wall/panel mounting,

front view

Fig. 24-5 Hole pattern for wall

mounting

Fig. 24-6 Wall/panel mounting,

side view

Aug. 2017 / Rev. 1.3 DS-CP10.121-EN

All parameters are typical values specified at 230Vac, 50Hz input voltage, 12V 16A output, 25°C ambient temperature and

after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany