MP8902

– LOW DROPOUT, 250mA LINEAR REGULATOR

MP8902 Rev. 1.0

www.MonolithicPower.com

2

9/4/2017

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2017 MPS. All Rights Reserved.

ORDERING INFORMATION

Part Number*

Package

Top Marking

Temperature

MP8902DG

–2.5

QFN8 (2x2)

–40

C to +85C

Part Number**

Package

Top Marking

Temperature

MP8902DG

–3.3

QFN8 (2x2)

–40

C to +85C

* For Tape & Reel, add suffix

–Z (e.g. MP8902DG–2.5–Z).

For RoHS compliant packaging, add suffix

–LF (e.g. MP8902DG–2.5–LF–Z)

** For Tape & Reel, add suffix

–Z (e.g. MP8902DG–3.3–Z).

For RoHS compliant packaging, add suffix

–LF (e.g. MP8902DG–3.3–LF–Z)

PACKAGE REFERENCE

ABSOLUTE MAXIMUM RATINGS

(1)

IN Supply Voltage ......................

–0.3V to +7.0V

FB Voltage........................

–0.3V to V

All Other Pins................................

–0.3V to +6V

(2)

………………………………………………....1.6W

Junction Temperature .............................. 150

C

Lead Temperature ................................... 260

C

Storage Temperature .............

–65°C to +150

C

Recommended Operating Conditions

(3)

Input Voltage ................................. 2.7V to 6.5V

Output Voltage................................ 1.25V to 5V

Load Current.......................... 250mA Maximum

Operating Temperature.............

–40

C to +85C

Thermal Resistance

(4)

QFN8 (2x2).............................80 ...... 16 ...

C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

ambient thermal resistance θ

dissipation will cause excessive die temperature, and the

regulator will go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4)

Measured on approximately 1” square of 1 oz copper.