UNIVERSAL INPUT, 12V/5A ADAPTER EVALUATION BOARD

NOTICE: The information in this document is subject to change without notice. Please contact MPS for current specifications.

Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS

products into any application. MPS will not assume any legal responsibility for any said applications.

EVX2001-Y-00B Rev.1.1

www.MonolithicPower.com

15

6/8/2017

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2017 MPS. All Rights Reserved.

Quick Start Guide

1. Preset Power Supply to 90VAC

 V

2. Turn Power Supply off.

3. Connect the Line and Neutral terminals of the power supply output to L and N port. For three-

wire input application, make OUTPUT GND connected to Earth.

4. Connect Load to:

a. Positive (+): VOUT

b. Negative (

–): GND

5. Turn Power Supply on after making connections.