TLE9255WLC datasheet(39/100 Pages) INFINEON

No. de pieza	TLE9255WLC

Descripción Electrónicos	HS CAN Transceiver with Partial Networking

PDF	100 Pages

Scroll/Zoom	100%

Fabricante Electrónico	INFINEON [Infineon Technologies AG]

Página de inicio	http://www.infineon.com

Logo

39 / 100 page

Data Sheet

Rev. 1.02 2018-02-02

TLE9255W

Fail Safe Functions

6.5

Overtemperature Protection

Integrated overtemperature detection protects the TLE9255W from thermal overstress of the transmitter. The

overtemperature protection is active in Normal-operating Mode only. The temperature sensor provides the

temperature threshold TJSD. If the junction temperature exceeds the upper threshold TJSD, then the TLE9255W

disables the transmitter and sets the bit TSD, indicating that a critical temperature situation is reached. After

the device cools down the transmitter is re-enabled. Only an SPI command can reset the TSD bit. A hysteresis

is implemented within the temperature sensor.

Figure 35

Overtemperature protection

6.6

Delay Time for Mode Change

The TLE9255W performs mode changes within the time window tMode_Change. During mode changes

(tMode_Change) the RxD output pin is permanently set to “high” and does not reflect the status on the CANH and

CANL input pins. After the mode change is completed, the TLE9255W releases the RxD output pin.

TxD

CANH

CANL

RxD

TJSD (shut down temperature)

switch-on transmitter

cool down

TLE9255WLC Datasheet(PDF) 39 Page - Infineon Technologies AG