8

D-sub Connectors

XM3-L/XM2-L/XM4K/XM4L

■ Precautions

Correct Use

●Grounding (Lock Pin Grounding Fixture)

• To ground, provide copper foil around the Connector Attachment

hole on the board, assemble the connector and grounding fixture,

and dip in solder as shown below.

• Insert the connector into the PCB and then simultaneously dip-sol-

der the connector terminals and lock pin to the board.

●Soldering

Automated Soldering Conditions

(Jet Flow)

1. Soldering temperature: 250

±5°C

2. Continuous soldering time: Within 5

±1 s

●Tightening Torque of Anchor and

Grounding Fixture

If the anchor is secured to the connector, be sure to tighten it to a

torque of 0.49 N·m.

Also, use a proper size tool to do this work.

●Mating

Do not connect the Connectors in the wrong direction, otherwise it

may be damaged.

Lock pin grounding fixture

PCB (t = 1.6 mm)

Approx. 1.9

• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.

• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad

systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious

influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or

equipment, and be sure to provide the system or equipment with double safety mechanisms.

Cat. No. G060-E1-02

1014(0412)(O)

Note: Do not use this document to operate the Unit.

OMRON Corporation

Electronic and Mechanical Components Company

Contact: www.omron.com/ecb