UG-325

Document Number: AN-000013

Page 4 of 4

Revision: 1.4

Rev Date: 03/26/2015

COMPLIANCE DECLARATION DISCLAIMER

InvenSense believes the environmental and other compliance information given in this document to be correct but cannot

guarantee accuracy or completeness. Conformity documents substantiating the specifications and component characteristics are on

file. InvenSense subcontracts manufacturing and the information contained herein is based on data received from vendors and

suppliers, which has not been validated by InvenSense.

This information furnished by InvenSense is believed to be accurate and reliable. However, no responsibility is assumed by

InvenSense for its use, or for any infringements of patents or other rights of third parties that may result from its use. Specifications

are subject to change without notice. InvenSense reserves the right to make changes to this product, including its circuits and

software, in order to improve its design and/or performance, without prior notice. InvenSense makes no warranties, neither

expressed nor implied, regarding the information and specifications contained in this document. InvenSense assumes no

responsibility for any claims or damages arising from information contained in this document, or from the use of products and

services detailed therein. This includes, but is not limited to, claims or damages based on the infringement of patents, copyrights,

mask work and/or other intellectual property rights.

Certain intellectual property owned by InvenSense and described in this document is patent protected. No license is granted by

implication or otherwise under any patent or patent rights of InvenSense. This publication supersedes and replaces all information

previously supplied. Trademarks that are registered trademarks are the property of their respective companies. InvenSense sensors

should not be used or sold in the development, storage, production or utilization of any conventional or mass-destructive weapons

or for any other weapons or life threatening applications, as well as in any other life critical applications such as medical equipment,

transportation, aerospace and nuclear instruments, undersea equipment, power plant equipment, disaster prevention and crime

prevention equipment.

©2015 InvenSense, Inc. All rights reserved. InvenSense, MotionTracking, MotionProcessing, MotionProcessor, MotionFusion,

MotionApps, DMP, AAR, and the InvenSense logo are trademarks of InvenSense, Inc. Other company and product names may be

trademarks of the respective companies with which they are associated.

©2015 InvenSense, Inc. All rights reserved.