Motor de Búsqueda de Datasheet de Componentes Electrónicos
  Mexican  ▼
ALLDATASHEET.COM.MX

X  

LGA775 Datasheet(PDF) 13 Page - Intel Corporation

No. de pieza LGA775
Descripción Electrónicos  Socket
PDF  25 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Fabricante Electrónico  INTEL [Intel Corporation]
Página de inicio  http://www.intel.com
Logo INTEL - Intel Corporation

LGA775 Datasheet(HTML) 13 Page - Intel Corporation

Back Button LGA775 Datasheet HTML 9Page - Intel Corporation LGA775 Datasheet HTML 10Page - Intel Corporation LGA775 Datasheet HTML 11Page - Intel Corporation LGA775 Datasheet HTML 12Page - Intel Corporation LGA775 Datasheet HTML 13Page - Intel Corporation LGA775 Datasheet HTML 14Page - Intel Corporation LGA775 Datasheet HTML 15Page - Intel Corporation LGA775 Datasheet HTML 16Page - Intel Corporation LGA775 Datasheet HTML 17Page - Intel Corporation Next Button
Zoom Inzoom in Zoom Outzoom out
 13 / 25 page
background image
Mechanical Requirements
Mechanical Design Guide
13
3.2.1.4
Markings
All markings withstand a temperature of 260 °C for 40 seconds, which is typical of a
reflow/rework profile for solder material used on the socket, as well as any environmental test
procedure outlined in Chapter 5 without degrading.
3.2.1.4.1
Name
LF-LGA775 (Font type is Helvetica Bold – minimum 6 point (or 2.125 mm)).
Note:
This mark shall be stamped or laser marked into the sidewall of the stiffener plate on the actuation
lever side when lead-free solder are is used.
LGA775 (Font type is Helvetica Bold – minimum 6 point (or 2.125 mm)).
Note:
This mark shall be stamped or laser marked into the sidewall of the stiffener plate on the actuation
lever side when eutectic solder balls are used.
Manufacturer’s insignia (font size at supplier’s discretion).
• This mark will be molded or laser marked into the socket housing.
Both socket name and manufacturer’s insignia must be visible when first seated on the
motherboard.
3.2.1.4.2
Lot Traceability
Each socket must be marked with a lot identification code to allow traceability of all components,
date of manufacture (year and week), and assembly location. The mark must be placed on a
surface that is visible when mounted on the motherboard.
3.2.1.5
Contacts
The socket has a total of 775 contacts; with 1.09 mm X 1.17 mm pitch (X by Y) in a 33x30 grid
array with 15x14 grid depopulation in the center of the array and selective depopulation for
alignment features.
Base material for the contacts is a high strength copper alloy.
For the area on the socket contacts where processor lands will mate, there is a 0.381 μm
[15 μinches] minimum gold plating over 1.27 μm [50 μinches] minimum nickel underplate.
No contamination by solder in the contact area is allowed during solder reflow.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25


Datasheet Descarga

Go To PDF Page


Enlace URL



¿ALLDATASHEET es útil para Ud.?  [ DONATE ] 

Todo acerca de Alldatasheet   |   Publicidad   |   Contáctenos   |   Política de Privacidad   |   Enlace a la hoja de datos    |   Intercambio de Enlaces   |   Lista de Fabricantes
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com