| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
SMBWLS28SP Datasheet(PDF) 3 Page - Banner Engineering Corp. |
|
|
|||||||||||||||||||||||||||||
SMBWLS28SP Datasheet(HTML) 3 Page - Banner Engineering Corp. |
|
3 / 6 page ![]() Specifications Supply Voltage and Current 12 V dc to 30 V dc Use only with a suitable Class 2 power supply (UL) or SELV power supply (CE) See electrical characteristics on product label Supply Protection Circuitry Protected against reverse polarity and transient voltages Light Characteristics UV365: 360–370 nm UV395: 390–400 nm LED Lifetime Lumen Maintenance – L70 When operating within specifications, output will decrease less than 30% after 40,000 hours. Push Button II = 100% light intensity I = 50% light intensity 0 = Off Pulse Width Modulation (PWM) Frequency: Up to 1000 Hz Voltage: 8 V dc to 30 V dc Current: 4 mA maximum per foot Construction Clear anodized aluminum housing; painted zinc end caps; zinc plated steel brackets Window for UV365 models: tempered borosilicate glass Window for UV395 models: acrylic Mounting (2) swivel brackets SMBWLS28RA included and (4) screws Connections Integral 4-pin M12/Euro-style male quick disconnect (4-pin connecting cordset required); or 2 m (6.5 ft) integral PVC cable Note: This product emits UV light. Exempt Risk Group (RG 0) product. No optical hazard is considered reasonably foreseeable, even for continuous, unrestricted use (IEC 62471). Environmental Rating IEC IP50 (non-sealed models) or IEC IP65, IEC IP67, IP69K per DIN 40050-9 (sealed models) Vibration and Mechanical Shock Vibration: 10 Hz to 55 Hz, 1.0 mm peak-to-peak amplitude per IEC 60068-2-6 Shock: 15G 11 ms duration, half sine wave per IEC 60068-2-27 Operating Temperature –40 °C to +70 °C (–40 °F to +158 °F) Light output begins to decrease above 50 °C (122 °F) and will be approximately 65% of max intensity at 60 °C (140 °F) and 30% of max intensity at 70 °C (158 °F) Storage Temperature –40 °C to +70 °C (–40 °F to +158 °F) Certifications D Sealed models only Application Note When connecting cascadable lights in series at 100% intensity, it is important not to exceed maximum current limitations: Maximum length of light at 12 V dc: 1.4 m (4.6 ft) Maximum length of light at 24 V dc: 3.0 m (9.8 ft) Maximum length of light at 30 V dc: 3.1 m (10.2 ft) At 50% intensity, double the lengths. Note: Do not spray cable with high- pressure sprayer, or cable damage will result. Table 3: Typical Current Light Length Typical Current Max. Current Radiant Flux (mW) (Typical at 25 °C) 12 V dc 24 V dc 30 V dc A UV365 UV395 285 mm 0.66 A 0.30 A 0.24 A 0.8 250 850 570 mm 1.36 A 0.61 A 0.48 A 1.6 500 1700 850 mm 2.13 A 0.92 A 0.73 A 2.4 - 2550 1130 mm 3.04 A 1.24 A 0.97 A 3.2 - 3400 WLS28-2 UV LED Strip Light P/N 189194 Rev. E www.bannerengineering.com - Tel: + 1 888 373 6767 3 |
|
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |