Datasheet

•

Lightly diffused area light for

•

Solid-state visible infrared (IR) LEDs

•

Direct connection to

connector (do not connect to any other power source)

•

Two available bracket options

Specifications

Light Source

Infrared (IR) LED, 850 nm

Illumination

Lightly diffused, high-intensity area light

At a 0.61 m (24 in) distance the light illuminates an 0.20 m (8 in) diameter

area that is within 60% of the center intensity

Supply voltage and current

Voltage supplied by P1B65Q, P2B65Q or select

PresencePLUS sensors

only (do not connect to any other power source)

Current: 400 mA max.

Connections

2 m (6.5 ft) with 3-wire, 8 mm female Pico-style connector

Connect to select

PresencePLUS sensors only

Construction

Low-carbon steel with black zinc plating

Window: acrylic

Operating Conditions

0 °C to +50 °C (+32 °F to +122 °F)

90% at +50 °C maximum relative humidity (non-condensing)

Useful Life

10,000 hours (LED ON time)

When operated within specifications, output will decrease less than 30%

after 10,000 hours and less than 40% after 20,000 hours

Certifications

Dimensions

All measurements are listed in millimeters [inches], unless noted otherwise.

110.4 mm

(4.35")

92.6 mm

(3.65")

46.2 mm

(1.81")

13.8 mm(0.54")

94.0 mm

(3.70")

61.0 mm

(2.40")

15.8 mm

(0.62")

8.2 mm

(0.32")

4x M4 x 0.7(7.1 mm Deep)

25.4 mm

(1.00")

Cleaning Instructions

Regularly remove any dust, dirt, or fingerprints from the light source.

1. Blow off dust using anti-static compressed air.

2. If necessary, use a lens cloth and lens cleaner or window cleaner to wipe off remaining debris. Do not use any other

chemicals for cleaning.

LEDIA80X80 Infrared (IR) Long-Range Area Light

Original Document

110607 Rev. B

20 February 2019

110607