Datasheet

LED Ring Lights (in two sizes) for use with VE Series vision sensors

•

Low-cost ring lights for VE Series vision sensors

•

Solid-state LED matrix; select continuous or strobed operation via

sensor software

•

Direct connection to a VE Series vision sensor if the sensor is powered

by 24 V dc

•

Mounts directly to a VE Series vision sensor using the included hardware

Models

62 × 62 mm Models

80 × 80 mm Models

Color

Connection

LEDIRV62X62M

LEDIRV80X80M

Infrared, 940 nm

300 mm (12 in) cable with a threaded 3-pin

Pico-style connector

LEDRRV62X62M

LEDRRV80X80M

Visible red, 630 nm

LEDWRV62X62M

LEDWRV80X80M

White, all visible

LEDBRV62X62M

LEDBRV80X80M

Visible blue, 464 nm to 475 nm

LEDGRV62X62M

LEDGRV80X80M

Visible green, 520 nm to 540 nm

NOTE: Ring lights are not compatible with VELC..- Sealed Lens Covers. Use another lighting technique

if an IP67 rating is needed for your application.

Install the Ring Light

1. Attach the ring light bracket to the sides of the VE Series vision sensor using the provided hardware kit.

2. Connect the cable to the sensor.

Specifications

Supply Voltage and Current

Voltage is supplied by the VE Series vision sensors, if operating at 24 V

dc (see sensor manual, p/n 191666)

62 × 62 Models: Infrared—24 V dc at 100 mA max.

80 × 80 Models: 24 V dc at 250 mA max.

All other colors: 24 V dc at 130 mA max.

Connection

300 mm (12 in) cable with a threaded 3-pin Pico-style connector

Construction

Cold-rolled steel with black gloss e-coat plating, acrylic window, four

M3 × 6 mm screws are included to attach the ring light to the VE

Series vision sensor

Light Source

LED, see the Models table for wavelengths

Strobe Type

Active low

Useful Life

10,000 hours (LED ON time). When operated within specifications,

output decreases less than 30% after 10,000 hours and less than 50%

(less than 40% for red and IR models) after 20,000 hours

Operating Conditions

0 °C to +50 °C (+32 °F to +122 °F)

90% at +50 °C maximum relative humidity (non-condensing)

Environmental Rating

IEC IP20 with a qualified lens properly installed

Certifications

VE Series Ring Lights

Original Document

192656 Rev. B

1 June 2016

192656