| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
UPD72012 Datasheet(PDF) 14 Page - NEC |
|
|
|||||||||||||||||||||||||||||
UPD72012 Datasheet(HTML) 14 Page - NEC |
|
14 / 36 page ![]() 14 Data Sheet S13918EJ3V0DS µPD72012 2.2 Standard Configuration Descriptor (1/2) Value Standard ROM code product No. Field Size (Bytes) Contents 003 004 Mask ROM code product 0 bLength 1 Shows the size in bytes of the standard configuration descriptor. 0x09 0x09 0x09 1 bDescriptorType 1 Shows that this is a standard configuration descriptor. 0x02 0x02 0x02 2 wTotalLength 2 Shows the total length of descriptors returned on a host Get_Descriptor (Configuration) request (standard configuration, standard interface, each standard endpoint, and HUB class descriptors). 0x0019 0x0019 0x0019 4 bNumInteface 1 Shows the number of interfaces that can be set in this configuration. Its value is fixed at “0x01” for the µPD72012. 0x01 0x01 0x01 5 bConfigurationValue 1 Specifying this value in a Set_Configuration request from the host sets this configuration in the µPD72012. 0x01 0x01 0x01 6 iConfiguration 1 Shows the index of the string descriptor for a comment about the configuration of a product using the HUB. Since not used for a standard ROM code product (003, 004), its value is “0x00”. When using this for a Mask ROM code product, set it to “0x04”. 0x00 0x00 0x00 or 0x04 7 bmAttributes 1 Uses a bitmap to show the power supply attributes of this configuration of the µPD72012. Caution Since the information “Self-power” in the status returned on a Get_Status request from the host reflects the level input to the PSSEL pin, be sure that there are no inconsistencies. “0xE0”: Corresponds to both “bus power” and “self- power” modes and shows that “Remote Wakeup” is supported. A standard ROM code product has this setting. Use this setting when using in “self-power” mode only or when switching between “bus power” and “self-power” by performing a PSSEL pin function. “0xA0”: Corresponds to “bus power” mode only and shows that “Remote Wakeup” is supported. Make this setting when using in “bus power” mode only. 0xE0 0xE0 0xE0 or 0xA0 |
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |