Quad Operational Amplifier – LM124

 

Low power, Quad Operational Amplifier in bare die form

Rev 1.0

16/06/18

Features:

 

 

 

 

 

 

The LM124 consists of x4 independent, frequency

compensated operational amplifiers specifically

designed to operate from a single power supply over a

wide input voltage range. Input common-mode voltage

range includes ground and output voltage can also

swing to ground. Unity gain crossover frequency and

input bias current are temperature-compensated to

provide high stability. Split-supply operation is also

possible with supply current drain independent of

voltage supplied for low power consumption. The

device operates over the military temperature range.

Description

Temperature compensated bandwidth (unity gain)

Wide power supply range, single supply: 3V-32V

or dual supplies: ±1.5V to ±16V

Differential input voltage range equal to the power

supply voltage

Input Common-Mode Voltage range includes GND

 

 

 

Ordering Information

Die Dimensions in µm (mils)

The following part suffixes apply:

1270 (50)

 

No suffix - MIL-STD-883 /2010B Visual Inspection

 

 

“H” - MIL-STD-883 /2010B Visual Inspection

+ MIL-PRF-38534 Class H LAT

 

“K” - MIL-STD-883 /2010A Visual Inspection (Space)

+ MIL-PRF-38534 Class K LAT

 

LAT = Lot Acceptance Test.

 

For further information on LAT process flows see below.

 

www.siliconsupplies.com\quality\bare-die-lot-qualification

 

For a higher electrical grade version of this product see LM124A 

 

Supply Formats:

Mechanical Specification

 

Default – Die in Waffle Pack (400 per tray capacity)

Die Size (Unsawn)

1270 x 1200

µm

50 x 47

mils

 

Sawn Wafer on Tape – On request

90 x 90

µm

Minimum Bond Pad Size

3.54 x 3.54

mils

Unsawn Wafer – On request

280 (±10)

µm

 

Die Thickness

 

11.02 (±0.39)

mils

Die Thickness <> 280µm(11 Mils) – On request

Top Metal Composition

Al

Assembled into Ceramic Package – On request

Back Metal Composition

N/A – Bare Si

Page 1 of 6 

www.siliconsupplies.com