BLUENRG-LP datasheet(64/72 Pages) STMICROELECTRONICS

64 / 72 page

6.4

Thermal characteristics

The maximum chip junction temperature (TJmax.) must never exceed the values in general operating conditions.

The maximum chip-junction temperature, TJ max., in degrees Celsius, can be calculated using the equation:

TJmax.=TAmax.+ PDmax×θJA

(1)

where:

•

TA max. is the maximum ambient temperature in °C

•

ΘJA is the package junction-to-ambient thermal resistance, in °C/W

•

PD max. is the sum of PINT max. and PI/O max. (PD max. = PINT max. + PI/O max.)

•

PINT max. is the product of IDD and VDD, expressed in Watt. This is the maximum chip internal power

PI/O max represents the maximum power dissipation on output pins:

•

PI/O max. = Σ (VOL × IOL) + Σ ((VDD – VOH) × IOH)

taking into account the actual VOL / IOL and VOH / IOH of the I/Os at low and high level in the applications.

Note:

When the SMPS is used, a portion of the power consumption is dissipated into the external inductor, therefore

reducing the chip power dissipation. This portion depends mainly on the inductor ESR characteristics.

Note:

As the radiated RF power is quite low (< 4 mW), it is not necessary to remove it from the chip power

consumption.

Note:

RF characteristics (such as: sensitivity, Tx power, consumption) are provided up to 85 °C.

Table 48. Package thermal characteristics

Symbol

Parameter

Value

Unit

ΘJA

Thermal resistance junction-ambient

QFN48 – 6 mm x 6 mm

25.1

ºC/W

Thermal resistance junction-ambient

QFN32 - 5 mm x 5 mm

26.9

Thermal resistance junction-ambient

WCSP49 – 0.4 mm pitch

BlueNRG-LP

Thermal characteristics

DS13282 - Rev 2

page 64/72

BLUENRG-LP Datasheet(PDF) 64 Page - STMicroelectronics

BLUENRG-LP Datasheet(HTML) 64 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72

Datasheet Descarga

Enlace URL