38BSH2 datasheet(1/2 Pages) MSYSTEM

No. de pieza	38BSH2

Descripción Electrónicos	ONE-SHOT OUTPUT RELAY CARD

PDF	2 Pages

Scroll/Zoom	100%

Fabricante Electrónico	MSYSTEM [M-System Co.,Ltd.]

Página de inicio	https://www.m-system.co.jp/

Logo

1 / 2 page

ES-4570

MODEL

DCS Input/Output Relay Card Series

38BSH2

ONE-SHOT OUTPUT RELAY CARD

P. 1 / 2

MODEL & SUFFIX CODE SELECTION

38BSH2–R

MODEL

POWER INPUT

R : 24V DC

ORDERING INFORMATION

Specify code number. (e.g. 38BSH2-R)

RELATED PRODUCTS

•Standard Rack (model: 38B❑)

GENERAL SPECIFICATIONS

Construction: rack mounted; terminal access via

screw terminals at the front and via

connector at the rear; terminal cover

provided

Connection

Input:

connector

Output: M3.5 screw terminals

(nickel-plated steel; torque 0.8 N·m)

Power input: supplied from connector

Isolation:

input or power to each output

LED:

light turns on with the coil energized

INPUT & OUTPUT

■INPUT:

DCS status output

Rating:

24V DC @3mA (approx.)

≤200Ω at ON; ≥100kΩ at OFF

Minimum input interval: 10 sec.

■OUTPUT: relay contact

Rating:

250V AC @3A (resistive load)

30V DC @3A (resistive load)

Minimum switching load: 5V DC @10mA

One-shot pulse width: 0.2 – 2 sec. (fixed)

Relay life

Mechanical: 5 × 107 cycles

Electrical: 106 cycles

External protection: recommended to protect the

contact and to eliminate noise when

driving an inductive load (coils, etc.)

INSTALLATION

Power input: 24V DC ±10%, approx. 50mA

(ripple 10% p-p max.)

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 30 to 90% RH (non-condensing)

Mounting: Standard Rack 38B❑

Dimensions: W24×H110×D110 mm

(0.94"×4.33"×4.33")

Weight:

150 g (0.33 lbs)

PERFORMANCE

Insulation resistance: ≥100MΩ with 500V DC

Dielectric strength: 1500V AC @1 minute

(input or power to output to ground)

1000V AC @1 minute (between outputs;

with output open)

FRONT VIEW

12

34

78

56

START

Ch. 2 LED

STOP

Ch. 1 LED

START

Terminal Cover

RELAY OPERATIONS

OFF

ON

Controller

Output

OFF

ON

One-shot

Output

(N.O.*)

*N.O. or N.C. selectable with jumpers.

(J1, J2, J101 and J102)

START

STOP

1. With the controller output (DCS status signal)

turned OFF, the STOP one-shot is output when the

power input is turned on.

2. With the controller output (DCS status signal)

turned ON, the START one-shot is output when the

power input is turned on.

3. LEDs indicate the output relay operations.

Número de pieza similar - 38BSH2

Fabricante Electrónico	No. de pieza	Datasheet	Descripción Electrónicos
M-System Co.,Ltd.	38BSH3	118Kb / 4P	DCS Input/Output Relay Card Series
	38BSH3-0-R	118Kb / 4P	DCS Input/Output Relay Card Series
	38BSH3-1-R	118Kb / 4P	DCS Input/Output Relay Card Series

More results

Descripción similar - 38BSH2

Fabricante Electrónico	No. de pieza	Datasheet	Descripción Electrónicos
National Semiconductor ...	9601	147Kb / 6P	Retriggerable One Shot
Dallas Semiconductor	DS1040	111Kb / 6P	Programmable One-Shot Pulse Generator
TEMIC Semiconductors	U490B	84Kb / 6P	One-Shot Phase Control
TT Electronics.	TPD	371Kb / 2P	One-Shot Non-Resettable Design
M-System Co.,Ltd.	R3-PD16C	198Kb / 7P	Remote I/O R3 Series ONE-SHOT PULSE OUTPUT MODULE
	R3-PD16B	199Kb / 8P	Remote I/O R3 Series ONE-SHOT PULSE OUTPUT MODULE
	R3-PD16A	196Kb / 7P	Remote I/O R3 Series ONE-SHOT PULSE OUTPUT MODULE
Maxim Integrated Produc...	DS1040	150Kb / 6P	Programmable One-Shot Pulse Generator 111799
Littelfuse	TDS	347Kb / 2P	Relay Output, Single Shot Time Delay Relay 2021 Rev: 1-B-030121
MOSDESIGN SEMICONDUCTOR...	M1200A	145Kb / 2P	ON/OFF ONE SHOT 2012-01-03

More results

38BSH2 Datasheet(PDF) 1 Page - M-System Co.,Ltd.

38BSH2 Datasheet(HTML) 1 Page - M-System Co.,Ltd.

Número de pieza similar - 38BSH2

Descripción similar - 38BSH2

Html Pages

1 2

Datasheet Descarga

Enlace URL