PROFINET Interface

CPX-AP-I-PN-M12

Part number: 8086607

Data sheet

Feature

Value

Dimensions W x L x H

45 mm x 170 mm x 35 mm

KC characters

KC EMC

Fieldbus interface, connection technology

M12x1, D-coded as per EN 61076-2-101

Diagnose per internal communication

Module error

Output short circuit/overload

Short circuit/overload in sensor supply

Load supply undervoltage

Max. power supply

2 x 4 A (external fuse required)

Note on degree of protection

Unused connections sealed

Communication interface, connection technology

M8x1, D-coded as per EN 61076-2-114

Fieldbus interface, connection type

2x socket

Permissible voltage fluctuations for electronics/sensors

± 25 %

Fieldbus interface, type

Ethernet

Power supply, connection technology

M8x1, A-coded as per EN 61076-2-104

Power supply, function

Incoming electronics/sensors and load

Fieldbus interface, function

Bus connection, incoming/forwarding

Voltage forwarding, connection technology

M8x1, A-coded as per EN 61076-2-104

Information on max. cable length

Power supply according to nominal voltage

Intrinsic current consumption at nominal operating voltage load

Typically 5 mA

Diagnostics via bus

Load switch-off

Load overvoltage

Load undervoltage

Electronics/sensors overvoltage

Electronics/sensors undervoltage

APDD invalid

Communication with AP module interrupted

Relative air humidity

5 - 95 %

Non-condensing

Fieldbus interface, galvanic isolation

yes

Communication interface, connection type

2x socket

Intrinsic current consumption at nominal operating voltage for

electronics/sensors

Typically 80 mA

Power supply, type of connection

Plug

Voltage forwarding, connection type

Socket

Communication interface, function

System communication XF20 OUT / XF21 OUT

Fieldbus interface, protocol

PROFINET IRT

PROFINET RT

Configuration support

GSDML file

Max. cable length

50 m system communication

6/8/21 - Subject to change - Festo AG & Co. KG

1/2