MODEL: R30BS

R30BS SPECIFICATIONS

ES-9008 Rev.5 Page 4/5

https://www.m-system.co.jp/

MOUNTING REQUIREMENTS unit: mm [inch]

UP

DOWN

■ MOUNTING DIRECTION

Mount the unit vertically as is shown in the figure below. Mounting in other directions may cause heat build-up inside the unit

and lead to shorten its life span or degrade its performance.

■ MOUNTING ON CONTROL PANEL

Secure sufficient ventilation space. Do not mount the unit right above devices

which radiate great heat such as heaters, transformers or resistors.

Maintenance space is also required above and below the unit.

Panel ceiling or wiring conduit (height ≤ 50 mm or 2 in.)

Panel bottom or wiring conduit (height ≤ 50 mm or 2 in.)

50 [2]

50 [2]

Base