MODEL: R8-TS2

http://www.m-system.co.jp/

R8-TS2 SPECIFICATIONS

ES-9742 Rev.4 Page 1/4

Remote I/O R8 Series

THERMOCOUPLE INPUT MODULE

(2 points, isolated)

Functions & Features

• Accepts direct input from an thermocouple and provides

an isolated, linearized DC signal compact size remote I/O

module

12 (.47)

115 (4.53)

59 (2.32)

mm (inch)

MODEL: R8–TS2[1]

ORDERING INFORMATION

• Code number: R8-TS2[1]

Specify a code from below for [1].

(e.g. R8-TS2/Q)

• Specify the specification for option code /Q

(e.g. /C01)

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

RELATED PRODUCTS

• PC configurator software (model: R8CFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

GENERAL SPECIFICATIONS

Connection

•Input: 4-pin e-CON connector

PWB connector XN2D-1474-S002 (Omron)

Recommended cable connector XN2A-1470 (Omron)

Outer sheath diameter: max. 1.5 dia

(The cable connector is not included in the package.

Refer to the specifications of the product.)

•Excitation supply, internal bus:

Connected to internal bus connector

•Internal power: Supplied from internal bus connector

Isolation: Input 1 to input 2 to exc. supply to internal bus or

internal power

Zero adjustments: -32000 - 32000 (PC programming)

Span adjustments: -32000 - 32000 (PC programming)

Configurator software can handle 100 - 200℃ as numerical

value of 0 - 10000

Input sensor setting:DIP switches on the side or with PC

Burnout detection: Selectable with the side DIP SW

Linearization: Standard

Cold Junction Compensation: CJC sensor incorporated

Module address: With rotary switch

Converted data range:

•Engineering unit value (°C, K) × 10 (integer)

•Engineering unit value (°F)

Terminating resistor: Built-in (DIP Switch, default: disable)

Configuration mode: With DIP switches on the side panel

Status indicator: Bi-color (red/green) LED; Refer to the

instruction manual.

Input status indicators: Red LED; Refer to the instruction

manual.

INPUT SPECIFICATIONS

Input resistance: 10kΩ minimum

Burnout sensing: 0.2 μA

T/C

USABLE

RANGE (°C)

CONFORMANCE

RANGE (°C)

K (CA)

E (CRC)

J (IC)

-272 to +1472

-272 to +1100

-260 to +1300

-150 to +1370

-170 to +1000

-180 to +1200

T (CC)

B (RH)

R

-272 to

+500

24 to

1920

-100 to +1860

-170 to +400

400 to 1760

200 to 1760

S

C (WRe 5-26)

N

-100 to +1860

-52 to +2416

-272 to +1400

0 to 1760

0 to 2315

-130 to +1300

U

L

P (Platinel II)

(PR)

-252 to

+700

-252 to +1000

-52 to +1496

-52 to +1860

-200 to +600

-200 to +900

0 to 1395

0 to 1760

INSTALLATION

Max. current consumption: 100 mA

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust