Datasheet

Revision 3.0

28-Jul-2015

CFR0011-120-00-FM Rev 5

35 of 57

© 2013 Dialog Semiconductor

SC14CVMDECT SF

Cordless Voice Module

FINAL

7.0 Specifications

All MIN/MAX specification limits are guaranteed by design, or production test, or statistical methods unless

note 17 is added to the parameter description. Typical values are informative.

Note 17: This parameter will not be tested in production. The MIN/MAX values are guaranteed by design and verified by characterization.

7.1 GENERAL

Note 18: The resulting range is very dependent of the mechanical design. Dialog Semiconductor is not responsible for this design and as such Dialog

Semiconductor is not responsible for the resulting performance range of the final product.

7.2 ABSOLUTE MAXIMUM RATINGS

Note 19: Absolute maximum ratings are those values that may be applied for maximum 50 hours.

Beyond these values, damage to the device may occur.

7.3 OPERATING CONDITIONS

Table 16: SC14CVMDECT SF module

ITEM

CONDITIONS

VALUE

UNIT

Dimensions

l x w x h

18.0 x 19.6 x 2.7

mm

Weight

1.5

g

Temperature range

-40 to +85

°C

Frequency range

According to DECT standard

1870 to 1930

MHz

Antenna range

According to DECT standard; (Note 18)

- typical outdoor

350

m

- typical indoor

75

m

Standards compliancy

ETS 300 444 (DECT GAP), former TBR2214

FCC part 15

Power supply

2 cell NiCd/NiMH

Note: for 1 Li-Ion battery an external LDO is required.

2.10 to 3.45

V

Maximum PCB warpage

For entire reflow range

0.1

mm

Table 17: Absolute Maximum Ratings (Note 19)

PARAMETER

DESCRIPTION

CONDITIONS

MIN

MAX

UNIT

Vbat_max

Max voltage on pin VBATIN, VDDPA

3.45

V

Vpon_max

Max voltage on pin PON

5.5

V

Vled_max

Max voltage on pin LED4, LED3

3.6

V

Vdig_bp_max

Max voltage on digital pins with back drive

protection; ports P0 and P2 (except P2.6)

3.6

V

Vdig_max

Max voltage on other digital pins

2.0

V

Vana_max

Max voltage on analog pins

2.2

V

Vesd_hbm

ESD voltage according to human body

model; all pins

2000

V

Vesd_mm

ESD voltage according to machine model;

all pins

150

V

Table 18: Operating conditions (Note 20)

PARAMETER

DESCRIPTION

CONDITIONS

MIN

TYP

MAX

UNIT

Vbat

Supply voltage on pin VBATIN

2.1

3.45

V

Vdd_pa

CLASSD supply voltage on pin VDDPA

2.1

3.45

V

Vpon

Voltage on pin PON

5.5

V

Vdig_bp

Voltage on digital pins with back drive

protection; ports P0 and P2 (except P2.6)

3.45

V