Product data sheet

09 18 106 9422

SEK 2R 6P Kinked pre-assy cover W/O SR

Current carrying capacity

The current carrying capacity of the connectors is

limited by the thermal load capability of the contact

element material including the connections and the

insulating parts. The derating curve is therefore

valid for currents which flow constantly (non-

intermittent) through each contact element of the

connector evenly, without exceeding the allowed

maximum temperature.

Measuring and testing techniques acc. to IEC

60512-5-2

Ambient temperature (°C)

Derating curve 80%

Cross section of solder termination

Page 3 / 3 | Creation date 2021-08-27 | Please note that the data specified here were taken as extracts from the online catalogue. Please refer to the

user documentation for the complete and up-to-date information and data. Please also note that the user is responsible for validating functionality,

conformity with applicable laws and directives, as well as for the electrical safety in the particular application.

HARTING Electronics GmbH | Marienwerderstraße 3 | 32339 Espelkamp | Germany

Phone +49 5772 47-97200 | electronics@HARTING.com | www.HARTING.com