AS6200 Adapter Board

ams Eval Kit Manual

Page 5

[v1-01] 2017-Dec-01

Document Feedback

3.2

AS6200/C Configuration

With the address selector, it is possible to choose the I²C address of the device. The included

jumper is an easy way of setting the I²C address of the sensor. The address selector must not be

left open.

Address Selector

Device Address

GND

100 1000

0x48

VDD

100 1001

0x49

Table 3: I²C address

3.3

Power Supply and Connections

The PCB has to be connected to an external microcontroller. P1 is populated with a 1x5 pin header

and is required for power supply as well as I²C communication. In addition to that it can be used to

monitor the interrupt status via pin 5 (IRQ).

Figure 3: I²C connection