| Motor de Búsqueda de Datasheet de Componentes Electrónicos |
|
AN80L32RMS Datasheet(PDF) 21 Page - Panasonic Semiconductor |
|
|
|||||||||||||||||||||||||||||
AN80L32RMS Datasheet(HTML) 21 Page - Panasonic Semiconductor |
|
21 / 26 page ![]() Voltage Regulators AN80LXXRMS Series 21 Parameter Symbol Range Unit Supply voltage VCC 5.4 to 14.5 V Parameter Symbol Conditions Min Typ Max Unit Output voltage VOUT VIN = 6.0 V, IOUT = 50 mA 4.850 5.0 5.150 V Input stability 1 REGIN1 VIN = 6.0 V → 14.5 V, IOUT = 50 mA 10 50 mV Input stability 2 REGIN2 VIN = 6.0 V → 9 V, IOUT = 50 mA 520 mV Load stability * 1 REGLOA VIN = 6.0 V, IOUT = 0 mA → 150 mA 50 150 mV Peak output current * 2 IPEAK VIN = 6.0 V, The output current value 180 240 mA decreases by 5% from the value when VOUT is at IOUT = 50 mA. Bias current without load IBIAS VIN = 6.0 V, IOUT = 0 mA 350 µA Bias current fluctuation with load ∆I BIAS VIN = 6.0 V, IOUT = 0 mA → 150 mA 5mA Standby consumption current ISTB VIN = 10 V, VCONT = 0 V 0.1 µA Bias current before starting IRUSH VIN = 4.7 V, IOUT = 0 mA 1.5 5mA regulation Ripple rejection ratio R.R. 1 Vrms, f = 120 Hz, IOUT = 10 mA 56 64 dB Minimum input and VDIF(min)1 VIN = 4.7 V, IOUT = 0 mA 0.1 0.2 V output voltage difference 1 Minimum input and VDIF(min)2 VIN = 5.1 V, IOUT = 150 mA 0.4 V output voltage difference 2 Control terminal threshold high voltage VCONTH VIN = 6.0 V, IOUT = 50 mA 1.50 V Control terminal threshold high voltage VCONTH VIN = 6.0 V, IOUT = 50 mA 0.30 V Control terminal current ICONT VIN = 6.0 V, IOUT = 50 mA 30 µA VCONT = 1.8 V • Design reference data Note) The following values are typical and not guaranteed values. Parameter Symbol Conditions Min Typ Max Unit Output noise voltage VNO 10Hz ≤ f ≤ 100kHz, I OUT = 10 mA 104 µV Output voltage temperature 1 ・ dVOUT VIN = 6.0 V, IOUT = 0 mA 90 ppm/ °C coefficient VOUT dT − 30°C ≤ T a ≤ + 85°C Output rise time tON VIN = 6.0 V, IOUT = 50 mA 0.20 ms VCONT = 0 V → 1.8 V, CIN = 0.1 µF COUT = 10 µF, VOUT = 90% Note) *1 : 1.0 Ω *2 : Peak output current : The output current when the output voltage has been decreased by 5% from the value at the time of the output current is 50 mA due to the overcurrent protection. s Electrical Characteristics at T a = 25°C Note) Unless otherwise specially provided, shorten each test time (within 10 ms) so that the test is conducted under the condition that the drift due to the temperature increase in the chip junction part can be neglected. CIN = 0.1 µF, COUT = 10 µF s Recommended Operating Range AN80L50RMS (5.0 V) Note) *1 : Refer to s Technical Information " • Output rise time characteristics". |
|
|
Enlace URL |
| ¿ALLDATASHEET es útil para Ud.? [ DONATE ] |
Todo acerca de Alldatasheet | Publicidad | Contáctenos | Política de Privacidad | Enlace a la hoja de datos | Intercambio de Enlaces | Lista de Fabricantes All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |