ANT-433-WRT-RPS datasheet(1/2 Pages) LINX

No. de pieza	ANT-433-WRT-RPS

Descripción Electrónicos	Adhesive or permanent mount

PDF	2 Pages

Scroll/Zoom	100%

Fabricante Electrónico	LINX [Linx Technologies]

Página de inicio	https://linxtechnologies.com/wp/

Logo

1 / 2 page

–

1 –

Revised 12/9/13

Product Description

The WRT Series antenna is ideally suited for

applications such as wireless vending, security,

traffic, or power equipment which require an

unobtrusive, tamper-resistant antenna solution.

The small 27 mm radome installs through a

small hole on the product and is anchored by a

threaded base. An adhesive foam compression

ring is used to resist the elements. The antenna

also features an integral counterpoise, which

reduces the need for a proximity ground plane.

The antenna is suited for mounting in applications

where the counterpoise will not be shielded

from the antenna (non-conductive or open metal

enclosures); installation where the counterpoise is

within a shielded enclosure will affect the antenna

performance. The antenna’s coax feed is available

with SMA or RP-SMA terminations. Alternate

coax lengths, connectors and custom colors are

available for volume OEM customers.

Features

• Low cost

• Unobtrusive

• Tamper resistant

• Integral counterpoise

• Indoor / outdoor

• Adhesive or permanent mount

Electrical Specifications

Center Frequency:

433MHz

Recom. Freq. Range:

425–441MHz

VSWR:

≤ 1.9 typical at center

Peak Gain:

–0.9dBi

Impedance:

50-ohms

Oper. Temp. Range:

–30° to +90°C

Max. Recom. Torque:

4.0 kgf-cm

Electrical specifications and plots measured on 10.16 cm x

10.16 cm (4.00” x 4.00”) reference ground plane

ANT-433-WRT-xxx

Data Sheet

by

Ordering Information

ANT-433-WRT-RPS (with RP-SMA connector)

ANT-433-WRT-SMA (with SMA connector)

19.0 mm

(0.75")

RG-174 Cable Length

216.0 mm

(8.50”)

5.26 mm

(0.207")

27.0 mm

(1.06")

6.0 mm

(0.24")

83.8 mm

(3.30")

M11x1.0 mm

Thread

Adhesive Ring

Remove protective plastic

before installation

Número de pieza similar - ANT-433-WRT-RPS

Fabricante Electrónico	No. de pieza	Datasheet	Descripción Electrónicos
List of Unclassifed Man...	ANT-433-CW-HD	154Kb / 1P	Part 15 compliant RP-SMA connector
Linx Technologies	ANT-433-CW-HD	252Kb / 2P	This reduced-height 쩌-wave antenna is ready 5/16/14
List of Unclassifed Man...	ANT-433-CW-HW	162Kb / 1P	Custom colors and terminations for volume OEMs
	ANT-433-CW-HW-SMA	162Kb / 1P	Custom colors and terminations for volume OEMs
	ANT-433-CW-HWR-SMA	98Kb / 1P	Custom colors and terminations for volume OEMs

More results

Descripción similar - ANT-433-WRT-RPS

Fabricante Electrónico	No. de pieza	Datasheet	Descripción Electrónicos
PANDUIT CORP.	ABM3H-A	69Kb / 1P	ADHESIVE BACKED MOUNT
PANDUIT CORP.	ABMM-A	74Kb / 1P	ADHESIVE BACKED MOUNT
List of Unclassifed Man...	ANT-2.4-WRT-XXX	859Kb / 1P	Adhesive or permanent mount
	ANT-868-WRT-XXX	856Kb / 1P	Adhesive or permanent mount
	ANT-916-WRT-RPS	856Kb / 1P	Adhesive or permanent mount
	TLS.30.105111	4Mb / 12P	Permanent Mount External Antenna
Taoglas antenna solutio...	TLS.20.1F11	6Mb / 13P	Permanent Mount External Antenna
	TLS.20.1F21	8Mb / 13P	Permanent Mount External Antenna
	TLS.20.105111	5Mb / 13P	Permanent Mount External Antenna
Pulse A Technitrol Comp...	RAZ32011AM	2Mb / 19P	GNSS / 2x LTE / 0, 1x, 2x or 3x WiFi Adhesive Mount

More results

ANT-433-WRT-RPS Datasheet(PDF) 1 Page - Linx Technologies

ANT-433-WRT-RPS Datasheet(HTML) 1 Page - Linx Technologies

Número de pieza similar - ANT-433-WRT-RPS

Descripción similar - ANT-433-WRT-RPS

Html Pages

1 2

Datasheet Descarga

Enlace URL